diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/baytrail/include/soc/gpio.h | 14 | ||||
| -rw-r--r-- | src/soc/intel/broadwell/smi.c | 2 |
2 files changed, 8 insertions, 8 deletions
diff --git a/src/soc/intel/baytrail/include/soc/gpio.h b/src/soc/intel/baytrail/include/soc/gpio.h index d6be80fde2..3c1e7f37dd 100644 --- a/src/soc/intel/baytrail/include/soc/gpio.h +++ b/src/soc/intel/baytrail/include/soc/gpio.h @@ -196,49 +196,49 @@ .io_sel = GPIO_DIR_INPUT, \ .is_gpio = 1 } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_LEVELHIGH_NO_PULL \ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_LEVELLOW_PU_20K \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TNE_IRQ | PAD_LEVEL_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_EDGELOW_PU_20K \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TNE_IRQ | PAD_EDGE_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_EDGEHIGH_PD_20K \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_EDGE_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_EDGELOW_PD_20K \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TNE_IRQ | PAD_EDGE_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } -/* Direct / dedicated IRQ input - pass signal directly to apic */ +/* Direct / dedicated IRQ input - pass signal directly to APIC */ #define GPIO_DIRQ_EDGEBOTH_PU_20K \ { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ| PAD_TNE_IRQ | PAD_EDGE_IRQ, \ diff --git a/src/soc/intel/broadwell/smi.c b/src/soc/intel/broadwell/smi.c index b26700e267..b1be1faa69 100644 --- a/src/soc/intel/broadwell/smi.c +++ b/src/soc/intel/broadwell/smi.c @@ -71,7 +71,7 @@ static void __unused southbridge_trigger_smi(void) * - Writes to io 0xb2 (APMC) * - Writes to the Local Apic ICR with Delivery mode SMI. * - * Using the local apic is a bit more tricky. According to + * Using the local APIC is a bit more tricky. According to * AMD Family 11 Processor BKDG no destination shorthand must be * used. * The whole SMM initialization is quite a bit hardware specific, so |