diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/broadwell/chip.h | 7 | ||||
| -rw-r--r-- | src/soc/intel/broadwell/igd.c | 36 |
2 files changed, 33 insertions, 10 deletions
diff --git a/src/soc/intel/broadwell/chip.h b/src/soc/intel/broadwell/chip.h index 456a4354ca..18a65857a7 100644 --- a/src/soc/intel/broadwell/chip.h +++ b/src/soc/intel/broadwell/chip.h @@ -117,8 +117,11 @@ struct soc_intel_broadwell_config { u16 gpu_panel_power_backlight_off_delay; /* Panel backlight settings */ - u32 gpu_cpu_backlight; - u32 gpu_pch_backlight; + unsigned int gpu_pch_backlight_pwm_hz; + enum { + GPU_BACKLIGHT_POLARITY_HIGH = 0, + GPU_BACKLIGHT_POLARITY_LOW, + } gpu_pch_backlight_polarity; /* * Graphics CD Clock Frequency diff --git a/src/soc/intel/broadwell/igd.c b/src/soc/intel/broadwell/igd.c index dab2d15750..f4322bf70e 100644 --- a/src/soc/intel/broadwell/igd.c +++ b/src/soc/intel/broadwell/igd.c @@ -335,14 +335,34 @@ static void igd_setup_panel(struct device *dev) gtt_write(PCH_PP_DIVISOR, reg32); } - /* Enable Backlight if needed */ - if (conf->gpu_cpu_backlight) { - gtt_write(BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE); - gtt_write(BLC_PWM_CPU_CTL, conf->gpu_cpu_backlight); - } - if (conf->gpu_pch_backlight) { - gtt_write(BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE); - gtt_write(BLC_PWM_PCH_CTL2, conf->gpu_pch_backlight); + /* So far all devices seem to use the PCH PWM function. + The CPU PWM registers are all zero after reset. */ + if (conf->gpu_pch_backlight_pwm_hz) { + /* For Lynx Point-LP: + Reference clock is 24MHz. We can choose either a 16 + or a 128 step increment. Use 16 if we would have less + than 100 steps otherwise. */ + const unsigned int hz_limit = 24 * 1000 * 1000 / 128 / 100; + unsigned int pwm_increment, pwm_period; + u32 south_chicken2; + + south_chicken2 = gtt_read(SOUTH_CHICKEN2); + if (conf->gpu_pch_backlight_pwm_hz > hz_limit) { + pwm_increment = 16; + south_chicken2 &= ~(1 << 5); + } else { + pwm_increment = 128; + south_chicken2 |= 1 << 5; + } + gtt_write(SOUTH_CHICKEN2, south_chicken2); + + pwm_period = 24 * 1000 * 1000 / pwm_increment / conf->gpu_pch_backlight_pwm_hz; + /* Start with a 50% duty cycle. */ + gtt_write(BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2); + + gtt_write(BLC_PWM_PCH_CTL1, + (conf->gpu_pch_backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 | + BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE); } } |