summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/mt8173/i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/mediatek/mt8173/i2c.c')
-rw-r--r--src/soc/mediatek/mt8173/i2c.c258
1 files changed, 7 insertions, 251 deletions
diff --git a/src/soc/mediatek/mt8173/i2c.c b/src/soc/mediatek/mt8173/i2c.c
index 3395539bf1..67de335ebf 100644
--- a/src/soc/mediatek/mt8173/i2c.c
+++ b/src/soc/mediatek/mt8173/i2c.c
@@ -23,11 +23,13 @@
#include <device/mmio.h>
#include <soc/addressmap.h>
#include <soc/i2c.h>
+#include <device/mmio.h>
#include <soc/pll.h>
+#include <soc/i2c.h>
#define I2C_CLK_HZ (AXI_HZ / 16)
-static struct mtk_i2c i2c[7] = {
+struct mtk_i2c mtk_i2c_bus_controller[7] = {
/* i2c0 setting */
{
.i2c_regs = (void *)I2C_BASE,
@@ -79,267 +81,21 @@ static struct mtk_i2c i2c[7] = {
#define I2CERR(fmt, arg...) printk(BIOS_ERR, I2CTAG fmt, ##arg)
-static inline void i2c_dma_reset(struct mt8173_i2c_dma_regs *dma_regs)
-{
- write32(&dma_regs->dma_rst, 0x1);
- udelay(50);
- write32(&dma_regs->dma_rst, 0x2);
- udelay(50);
- write32(&dma_regs->dma_rst, 0x0);
- udelay(50);
-}
-
void mtk_i2c_bus_init(uint8_t bus)
{
- uint8_t sample_div;
uint8_t step_div;
uint32_t i2c_freq;
+ const uint8_t sample_div = 1;
- assert(bus < ARRAY_SIZE(i2c));
+ assert(bus < ARRAY_SIZE(mtk_i2c_bus_controller));
/* Calculate i2c frequency */
- sample_div = 1;
step_div = DIV_ROUND_UP(I2C_CLK_HZ, (400 * KHz * sample_div * 2));
i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2);
assert(sample_div < 8 && step_div < 64 && i2c_freq < 400 * KHz &&
i2c_freq >= 380 * KHz);
/* Init i2c bus Timing register */
- write32(&i2c[bus].i2c_regs->timing, (sample_div - 1) << 8 |
- (step_div - 1));
-}
-
-static inline void mtk_i2c_dump_info(uint8_t bus)
-{
- struct mt8173_i2c_regs *regs;
-
- regs = i2c[bus].i2c_regs;
-
- I2CLOG("I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\nINTR_STAT %x\n"
- "CONTROL %x\nTRANSFER_LEN %x\nTRANSAC_LEN %x\nDELAY_LEN %x\n"
- "TIMING %x\nSTART %x\nFIFO_STAT %x\nIO_CONFIG %x\nHS %x\n"
- "DEBUGSTAT %x\nEXT_CONF %x\n",
- (read32(&regs->salve_addr)),
- (read32(&regs->intr_mask)),
- (read32(&regs->intr_stat)),
- (read32(&regs->control)),
- (read32(&regs->transfer_len)),
- (read32(&regs->transac_len)),
- (read32(&regs->delay_len)),
- (read32(&regs->timing)),
- (read32(&regs->start)),
- (read32(&regs->fifo_stat)),
- (read32(&regs->io_config)),
- (read32(&regs->hs)),
- (read32(&regs->debug_stat)),
- (read32(&regs->ext_conf)));
-
- I2CLOG("addr address %x\n", (uint32_t)regs);
-}
-
-static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
- enum i2c_modes read)
-{
- uint32_t ret_code = I2C_OK;
- uint16_t status;
- uint32_t time_out_val = 0;
- uint8_t addr;
- uint32_t write_len = 0;
- uint32_t read_len = 0;
- uint8_t *write_buffer = NULL;
- uint8_t *read_buffer = NULL;
- struct mt8173_i2c_regs *regs;
- struct mt8173_i2c_dma_regs *dma_regs;
- struct stopwatch sw;
-
- regs = i2c[bus].i2c_regs;
- dma_regs = i2c[bus].i2c_dma_regs;
-
- addr = seg[0].slave;
-
- switch (read) {
- case I2C_WRITE_MODE:
- assert(seg[0].len > 0 && seg[0].len <= 255);
- write_len = seg[0].len;
- write_buffer = seg[0].buf;
- break;
-
- case I2C_READ_MODE:
- assert(seg[0].len > 0 && seg[0].len <= 255);
- read_len = seg[0].len;
- read_buffer = seg[0].buf;
- break;
-
- /* Must use special write-then-read mode for repeated starts. */
- case I2C_WRITE_READ_MODE:
- assert(seg[0].len > 0 && seg[0].len <= 255);
- assert(seg[1].len > 0 && seg[1].len <= 255);
- write_len = seg[0].len;
- read_len = seg[1].len;
- write_buffer = seg[0].buf;
- read_buffer = seg[1].buf;
- break;
- }
-
- /* Clear interrupt status */
- write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR |
- I2C_HS_NACKERR);
-
- write32(&regs->fifo_addr_clr, 0x1);
-
- /* Enable interrupt */
- write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR |
- I2C_TRANSAC_COMP);
-
- switch (read) {
- case I2C_WRITE_MODE:
- memcpy(_dma_coherent, write_buffer, write_len);
-
- /* control registers */
- write32(&regs->control, ACK_ERR_DET_EN | DMA_EN | CLK_EXT |
- REPEATED_START_FLAG);
-
- /* Set transfer and transaction len */
- write32(&regs->transac_len, 1);
- write32(&regs->transfer_len, write_len);
-
- /* set i2c write slave address*/
- write32(&regs->slave_addr, addr << 1);
-
- /* Prepare buffer data to start transfer */
- write32(&dma_regs->dma_con, I2C_DMA_CON_TX);
- write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent);
- write32(&dma_regs->dma_tx_len, write_len);
- break;
-
- case I2C_READ_MODE:
- /* control registers */
- write32(&regs->control, ACK_ERR_DET_EN | DMA_EN | CLK_EXT |
- REPEATED_START_FLAG);
-
- /* Set transfer and transaction len */
- write32(&regs->transac_len, 1);
- write32(&regs->transfer_len, read_len);
-
- /* set i2c read slave address*/
- write32(&regs->slave_addr, (addr << 1 | 0x1));
-
- /* Prepare buffer data to start transfer */
- write32(&dma_regs->dma_con, I2C_DMA_CON_RX);
- write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent);
- write32(&dma_regs->dma_rx_len, read_len);
- break;
-
- case I2C_WRITE_READ_MODE:
- memcpy(_dma_coherent, write_buffer, write_len);
-
- /* control registers */
- write32(&regs->control, DIR_CHG | ACK_ERR_DET_EN | DMA_EN |
- CLK_EXT | REPEATED_START_FLAG);
-
- /* Set transfer and transaction len */
- write32(&regs->transfer_len, write_len);
- write32(&regs->transfer_aux_len, read_len);
- write32(&regs->transac_len, 2);
-
- /* set i2c write slave address*/
- write32(&regs->slave_addr, addr << 1);
-
- /* Prepare buffer data to start transfer */
- write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG);
- write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent);
- write32(&dma_regs->dma_tx_len, write_len);
- write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent);
- write32(&dma_regs->dma_rx_len, read_len);
- break;
- }
-
- write32(&dma_regs->dma_int_flag, I2C_DMA_CLR_FLAG);
- write32(&dma_regs->dma_en, I2C_DMA_START_EN);
-
- /* start transfer transaction */
- write32(&regs->start, 0x1);
-
- stopwatch_init_msecs_expire(&sw, 100);
-
- /* polling mode : see if transaction complete */
- while (1) {
- status = read32(&regs->intr_stat);
- if (status & I2C_HS_NACKERR) {
- ret_code = I2C_TRANSFER_FAIL_HS_NACKERR;
- I2CERR("[i2c%d transfer] transaction NACK error\n",
- bus);
- mtk_i2c_dump_info(bus);
- break;
- } else if (status & I2C_ACKERR) {
- ret_code = I2C_TRANSFER_FAIL_ACKERR;
- I2CERR("[i2c%d transfer] transaction ACK error\n", bus);
- mtk_i2c_dump_info(bus);
- break;
- } else if (status & I2C_TRANSAC_COMP) {
- ret_code = I2C_OK;
- memcpy(read_buffer, _dma_coherent, read_len);
- break;
- }
-
- if (stopwatch_expired(&sw)) {
- ret_code = I2C_TRANSFER_FAIL_TIMEOUT;
- I2CERR("[i2c%d transfer] transaction timeout:%d\n", bus,
- time_out_val);
- mtk_i2c_dump_info(bus);
- break;
- }
- }
-
- write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR |
- I2C_HS_NACKERR);
-
- /* clear bit mask */
- write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR |
- I2C_TRANSAC_COMP);
-
- /* reset the i2c controller for next i2c transfer. */
- write32(&regs->softreset, 0x1);
-
- i2c_dma_reset(dma_regs);
-
- return ret_code;
-}
-
-static uint8_t mtk_i2c_should_combine(struct i2c_msg *seg, int left_count)
-{
- if (left_count >= 2 &&
- !(seg[0].flags & I2C_M_RD) &&
- (seg[1].flags & I2C_M_RD) &&
- seg[0].slave == seg[1].slave)
- return 1;
- else
- return 0;
-}
-
-int platform_i2c_transfer(unsigned bus, struct i2c_msg *segments,
- int seg_count)
-{
- int ret = 0;
- int i;
- int read;
-
- for (i = 0; i < seg_count; i++) {
- if (mtk_i2c_should_combine(&segments[i], seg_count - i)) {
- read = I2C_WRITE_READ_MODE;
- } else {
- read = (segments[i].flags & I2C_M_RD) ?
- I2C_READ_MODE : I2C_WRITE_MODE;
- }
-
- ret = mtk_i2c_transfer(bus, &segments[i], read);
-
- if (ret)
- break;
-
- if (read == I2C_WRITE_READ_MODE)
- i++;
- }
-
- return ret;
+ write32(&mtk_i2c_bus_controller[bus].i2c_regs->timing,
+ (sample_div - 1) << 8 | (step_div - 1));
}