diff options
Diffstat (limited to 'src/soc/nvidia/tegra124/clock.c')
| -rw-r--r-- | src/soc/nvidia/tegra124/clock.c | 74 |
1 files changed, 70 insertions, 4 deletions
diff --git a/src/soc/nvidia/tegra124/clock.c b/src/soc/nvidia/tegra124/clock.c index d98da29469..a642a7bcd4 100644 --- a/src/soc/nvidia/tegra124/clock.c +++ b/src/soc/nvidia/tegra124/clock.c @@ -327,6 +327,63 @@ void clock_external_output(int clk_id) } } +/* Start PLLM for SDRAM. */ +void clock_sdram(u32 m, u32 n, u32 p, u32 setup, u32 ph45, u32 ph90, + u32 ph135, u32 kvco, u32 kcp, u32 stable_time, u32 emc_source, + u32 same_freq) +{ + u32 misc1 = ((setup << PLLM_MISC1_SETUP_SHIFT) | + (ph45 << PLLM_MISC1_PD_LSHIFT_PH45_SHIFT) | + (ph90 << PLLM_MISC1_PD_LSHIFT_PH90_SHIFT) | + (ph135 << PLLM_MISC1_PD_LSHIFT_PH135_SHIFT)), + misc2 = ((kvco << PLLM_MISC2_KVCO_SHIFT) | + (kcp << PLLM_MISC2_KCP_SHIFT)), + base; + + if (same_freq) + emc_source |= CLK_SOURCE_EMC_MC_EMC_SAME_FREQ; + else + emc_source &= ~CLK_SOURCE_EMC_MC_EMC_SAME_FREQ; + + /* + * Note PLLM_BASE.PLLM_OUT1_RSTN must be in RESET_ENABLE mode, and + * PLLM_BASE.ENABLE must be in DISABLE state (both are the default + * values after coldboot reset). + */ + + writel(misc1, &clk_rst->pllm_misc1); + writel(misc2, &clk_rst->pllm_misc2); + + /* PLLM.BASE needs BYPASS=0, different from general init_pll */ + base = readl(&clk_rst->pllm_base); + base &= ~(PLLCMX_BASE_DIVN_MASK | PLLCMX_BASE_DIVM_MASK | + PLLM_BASE_DIVP_MASK | PLL_BASE_BYPASS); + base |= ((m << PLL_BASE_DIVM_SHIFT) | (n << PLL_BASE_DIVN_SHIFT) | + (p << PLL_BASE_DIVP_SHIFT)); + writel(base, &clk_rst->pllm_base); + + setbits_le32(&clk_rst->pllm_base, PLL_BASE_ENABLE); + /* stable_time is required, before we can start to check lock. */ + udelay(stable_time); + + while (!(readl(&clk_rst->pllm_base) & PLL_BASE_LOCK)) { + udelay(1); + } + /* + * After PLLM reports being locked, we have to delay 10us before + * enabling PLLM_OUT. + */ + udelay(10); + + /* Put OUT1 out of reset state (start to output). */ + setbits_le32(&clk_rst->pllm_out, PLLM_OUT1_RSTN_RESET_DISABLE); + + /* Enable and start MEM(MC) and EMC. */ + clock_enable_clear_reset(0, CLK_H_MEM | CLK_H_EMC, 0, 0, 0, 0); + writel(emc_source, &clk_rst->clk_src_emc); + udelay(IO_STABILIZATION_DELAY); +} + void clock_cpu0_config_and_reset(void *entry) { void * const evp_cpu_reset = (uint8_t *)TEGRA_EVP_BASE + 0x100; @@ -357,6 +414,7 @@ void clock_cpu0_config_and_reset(void *entry) // Enable other CPU related clocks. setbits_le32(&clk_rst->clk_out_enb_l, CLK_L_CPU); setbits_le32(&clk_rst->clk_out_enb_v, CLK_V_CPUG); + setbits_le32(&clk_rst->clk_out_enb_v, CLK_V_CPULP); // Disable the reset on the non-CPU parts of the fast cluster. write32(CRC_RST_CPUG_CLR_NONCPU, @@ -372,6 +430,15 @@ void clock_cpu0_config_and_reset(void *entry) CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CX3 | CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG, &clk_rst->rst_cpug_cmplx_clr); + + // Disable the reset on the non-CPU parts of the slow cluster. + write32(CRC_RST_CPULP_CLR_NONCPU, + &clk_rst->rst_cpulp_cmplx_clr); + // Disable the various resets on the LP CPU. + write32(CRC_RST_CPULP_CLR_CPU0 | CRC_RST_CPULP_CLR_DBG0 | + CRC_RST_CPULP_CLR_CORE0 | CRC_RST_CPULP_CLR_CX0 | + CRC_RST_CPULP_CLR_L2 | CRC_RST_CPULP_CLR_PDBG, + &clk_rst->rst_cpulp_cmplx_clr); } void clock_halt_avp(void) @@ -401,11 +468,10 @@ void clock_init(void) * features section in the TRM). */ write32(1 << HCLK_DIVISOR_SHIFT | 0 << PCLK_DIVISOR_SHIFT, &clk_rst->clk_sys_rate); /* pclk = hclk = sclk/2 */ - write32(0 << SCLK_DIVIDEND_SHIFT | - (CEIL_DIV(TEGRA_PLLC_KHZ, 300000) - 1) << SCLK_DIVISOR_SHIFT - | SCLK_DIV_ENB, &clk_rst->super_sclk_div); + write32(CLK_DIVIDER(TEGRA_PLLC_KHZ, 300000) << PLL_OUT_RATIO_SHIFT | + PLL_OUT_CLKEN | PLL_OUT_RSTN, &clk_rst->pllc_out); write32(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT | - SCLK_SOURCE_PLLC_OUT0 << SCLK_RUN_SHIFT, + SCLK_SOURCE_PLLC_OUT1 << SCLK_RUN_SHIFT, &clk_rst->sclk_brst_pol); /* sclk = 300 MHz */ /* Change the oscillator drive strength (from U-Boot -- why?) */ |