diff options
Diffstat (limited to 'src/soc/nvidia/tegra210/Kconfig')
| -rw-r--r-- | src/soc/nvidia/tegra210/Kconfig | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/src/soc/nvidia/tegra210/Kconfig b/src/soc/nvidia/tegra210/Kconfig new file mode 100644 index 0000000000..257345e303 --- /dev/null +++ b/src/soc/nvidia/tegra210/Kconfig @@ -0,0 +1,143 @@ +config SOC_NVIDIA_TEGRA210 + bool + default n + select ARCH_BOOTBLOCK_ARMV4 + select ARCH_VERSTAGE_ARMV4 + select ARCH_ROMSTAGE_ARMV4 + select ARCH_RAMSTAGE_ARMV8_64 + select ARCH_ARM64_CPU_CORTEX_A57 + select ARCH_ARM64_CORTEX_A57_POWER_DOWN_SUPPORT + select BOOTBLOCK_CONSOLE + select GIC + select HAVE_MONOTONIC_TIMER + select GENERIC_UDELAY + select HAVE_HARD_RESET + select HAVE_UART_SPECIAL + select HAVE_UART_MEMORY_MAPPED + select EARLY_CONSOLE + select ARM_BOOTBLOCK_CUSTOM + select DYNAMIC_CBMEM + select ARM64_USE_ARM_TRUSTED_FIRMWARE + select HAS_PRECBMEM_TIMESTAMP_REGION + select CHROMEOS_RAMOOPS_NON_ACPI + select GENERIC_GPIO_LIB + +if SOC_NVIDIA_TEGRA210 + +config MAINBOARD_DO_DSI_INIT + bool "Use dsi graphics interface" + depends on MAINBOARD_DO_NATIVE_VGA_INIT + default n + help + Initialize dsi display + +config MAINBOARD_DO_SOR_INIT + bool "Use dp graphics interface" + depends on MAINBOARD_DO_NATIVE_VGA_INIT + default n + help + Initialize dp display + +config BOOTBLOCK_CPU_INIT + string + default "soc/nvidia/tegra210/bootblock.c" + help + CPU/SoC-specific bootblock code. This is useful if the + bootblock must load microcode or copy data from ROM before + searching for the bootblock. + +config MAX_CPUS + int + default 4 + +choice CONSOLE_SERIAL_TEGRA210_UART_CHOICES + prompt "Serial Console UART" + default CONSOLE_SERIAL_TEGRA210_UARTA + depends on CONSOLE_SERIAL_UART + +config CONSOLE_SERIAL_TEGRA210_UARTA + bool "UARTA" + help + Serial console on UART A. + +config CONSOLE_SERIAL_TEGRA210_UARTB + bool "UARTB" + help + Serial console on UART B. + +config CONSOLE_SERIAL_TEGRA210_UARTC + bool "UARTC" + help + Serial console on UART C. + +config CONSOLE_SERIAL_TEGRA210_UARTD + bool "UARTD" + help + Serial console on UART D. + +config CONSOLE_SERIAL_TEGRA210_UARTE + bool "UARTE" + help + Serial console on UART E. + +endchoice + +config CONSOLE_SERIAL_TEGRA210_UART_ADDRESS + hex + depends on CONSOLE_SERIAL_UART + default 0x70006000 if CONSOLE_SERIAL_TEGRA210_UARTA + default 0x70006040 if CONSOLE_SERIAL_TEGRA210_UARTB + default 0x70006200 if CONSOLE_SERIAL_TEGRA210_UARTC + default 0x70006300 if CONSOLE_SERIAL_TEGRA210_UARTD + default 0x70006400 if CONSOLE_SERIAL_TEGRA210_UARTE + help + Map the UART names to the respective MMIO addres. + +config BOOTROM_SDRAM_INIT + bool "SoC BootROM does SDRAM init with full BCT" + default n + help + Use during Foster LPDDR4 bringup. + +config TRUSTZONE_CARVEOUT_SIZE_MB + hex "Size of Trust Zone region" + default 0x14 + help + Size of Trust Zone area in MiB to reserve in memory map. + +# Default to 700MHz. This value is based on nv bootloader setting. +config PLLX_KHZ + int + default 700000 +endif + +config HAVE_MTC + bool "Add external Memory controller Training Code binary" + default n + depends on USE_BLOBS + help + Select this option to add emc training firmware + +if HAVE_MTC + +config MTC_FILE + string "tegra mtc firmware filename" + default "tegra_mtc.bin" + help + The filename of the mtc firmware + +config MTC_DIRECTORY + string "Directory where MTC firmware file is located" + default "." + help + Path to directory where MTC firmware file is located. + +config MTC_ADDRESS + hex + default 0x81000000 + help + The DRAM location where MTC firmware to be loaded in. This location + needs to be consistent with the location defined in tegra_mtc.ld + +endif # HAVE_MTC + |