summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/ipq806x/usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/qualcomm/ipq806x/usb.c')
-rw-r--r--src/soc/qualcomm/ipq806x/usb.c51
1 files changed, 43 insertions, 8 deletions
diff --git a/src/soc/qualcomm/ipq806x/usb.c b/src/soc/qualcomm/ipq806x/usb.c
index d7dac7243c..72ec19ecdf 100644
--- a/src/soc/qualcomm/ipq806x/usb.c
+++ b/src/soc/qualcomm/ipq806x/usb.c
@@ -102,15 +102,32 @@ static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE;
static void setup_dwc3(struct usb_dwc3 *dwc3)
{
write32(&dwc3->usb3pipectl,
- 0x1 << 31 | 0x1 << 25 | 0x1 << 24 | 0x1 << 19 | 0x1 << 18 | 0x1 << 1 | 0x1 << 0 | 0);
+ 0x1 << 31 | /* assert PHY soft reset */
+ 0x1 << 25 | /* (default) U1/U2 exit fail -> recovery? */
+ 0x1 << 24 | /* (default) activate PHY low power states */
+ 0x1 << 19 | /* (default) PHY low power delay value */
+ 0x1 << 18 | /* (default) activate PHY low power delay */
+ 0x1 << 1 | /* (default) Tx deemphasis value */
+ 0x1 << 0); /* (default) elastic buffer mode */
write32(&dwc3->usb2phycfg,
- 0x1 << 31 | 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+ 0x1 << 31 | /* assert PHY soft reset */
+ 0x9 << 10 | /* (default) PHY clock turnaround 8-bit UTMI+ */
+ 0x1 << 8 | /* (default) enable PHY sleep in L1 */
+ 0x1 << 6); /* (default) enable PHY suspend */
write32(&dwc3->ctl,
- 0x2 << 19 | 0x1 << 16 | 0x1 << 12 | 0x1 << 11 | 0x1 << 10 | 0x1 << 2 | 0);
-
- write32(&dwc3->uctl, 0x32 << 22 | 0x1 << 15 | 0x10 << 0 | 0);
+ 0x2 << 19 | /* (default) suspend clock scaling */
+ 0x1 << 16 | /* retry SS three times before HS downgrade */
+ 0x1 << 12 | /* port capability HOST */
+ 0x1 << 11 | /* assert core soft reset */
+ 0x1 << 10 | /* (default) sync ITP to refclk */
+ 0x1 << 2); /* U2 exit after 8us LFPS (instead of 248ns) */
+
+ write32(&dwc3->uctl,
+ 0x32 << 22 | /* (default) reference clock period in ns */
+ 0x1 << 15 | /* (default) XHCI compliant device addressing */
+ 0x10 << 0); /* (default) devices time out after 32us */
udelay(5);
@@ -122,13 +139,31 @@ static void setup_dwc3(struct usb_dwc3 *dwc3)
static void setup_phy(struct usb_qc_phy *phy)
{
write32(&phy->ss_phy_ctrl,
- 0x1 << 24 | 0x1 << 8 | 0x1 << 7 | 0x19 << 0 | 0);
+ 0x1 << 24 | /* Indicate VBUS power present */
+ 0x1 << 8 | /* Enable USB3 ref clock to prescaler */
+ 0x1 << 7 | /* assert SS PHY reset */
+ 0x19 << 0); /* (default) reference clock multiplier */
write32(&phy->hs_phy_ctrl,
- 0x1 << 26 | 0x1 << 25 | 0x1 << 24 | 0x1 << 21 | 0x1 << 20 | 0x1 << 18 | 0x1 << 17 | 0x1 << 11 | 0x1 << 9 | 0x1 << 8 | 0x1 << 7 | 0x7 << 4 | 0x1 << 1 | 0);
+ 0x1 << 26 | /* (default) unclamp DPSE/DMSE VLS */
+ 0x1 << 25 | /* (default) select freeclk for utmi_clk */
+ 0x1 << 24 | /* (default) unclamp DMSE VLS */
+ 0x1 << 21 | /* (default) enable UTMI clock */
+ 0x1 << 20 | /* set OTG VBUS as valid */
+ 0x1 << 18 | /* use ref clock from core */
+ 0x1 << 17 | /* (default) unclamp DPSE VLS */
+ 0x1 << 11 | /* force xo/bias/pll to stay on in suspend */
+ 0x1 << 9 | /* (default) unclamp IDHV */
+ 0x1 << 8 | /* (default) unclamp VLS (again???) */
+ 0x1 << 7 | /* (default) unclamp HV VLS */
+ 0x7 << 4 | /* select frequency (no idea which one) */
+ 0x1 << 1); /* (default) "retention enable" */
write32(&phy->ss_phy_param1,
- 0x6e << 20 | 0x20 << 14 | 0x17 << 8 | 0x9 << 3 | 0);
+ 0x6e << 20 | /* full TX swing amplitude */
+ 0x20 << 14 | /* (default) 6dB TX deemphasis */
+ 0x17 << 8 | /* 3.5dB TX deemphasis */
+ 0x9 << 3); /* (default) LoS detector level */
write32(&phy->general_cfg, 0x1 << 2); /* set XHCI 1.00 compliance */