summaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/rockchip/rk3399')
-rw-r--r--src/soc/rockchip/rk3399/Kconfig8
-rw-r--r--src/soc/rockchip/rk3399/clock.c95
2 files changed, 103 insertions, 0 deletions
diff --git a/src/soc/rockchip/rk3399/Kconfig b/src/soc/rockchip/rk3399/Kconfig
index 65b31d523e..ff857c022c 100644
--- a/src/soc/rockchip/rk3399/Kconfig
+++ b/src/soc/rockchip/rk3399/Kconfig
@@ -24,4 +24,12 @@ config PMIC_BUS
int
default -1
+config RK3399_SPREAD_SPECTRUM_DDR
+ bool "Spread-spectrum DDR clock"
+ default n
+ help
+ Select Spread Spectrum Modulator (SSMOD) is a fully-digital circuit
+ used to modulate the frequency of the Silicon Creations’ Fractional
+ PLL in order to reduce EMI.
+
endif
diff --git a/src/soc/rockchip/rk3399/clock.c b/src/soc/rockchip/rk3399/clock.c
index eb413a1329..944ca6f417 100644
--- a/src/soc/rockchip/rk3399/clock.c
+++ b/src/soc/rockchip/rk3399/clock.c
@@ -82,8 +82,23 @@ enum {
PLL_MODE_DEEP,
PLL_DSMPD_MASK = 1,
PLL_DSMPD_SHIFT = 3,
+ PLL_FRAC_MODE = 0,
PLL_INTEGER_MODE = 1,
+ /* PLL_CON4 */
+ PLL_SSMOD_BP_MASK = 1,
+ PLL_SSMOD_BP_SHIFT = 0,
+ PLL_SSMOD_DIS_SSCG_MASK = 1,
+ PLL_SSMOD_DIS_SSCG_SHIFT = 1,
+ PLL_SSMOD_RESET_MASK = 1,
+ PLL_SSMOD_RESET_SHIFT = 2,
+ PLL_SSMOD_DOWNSPEAD_MASK = 1,
+ PLL_SSMOD_DOWNSPEAD_SHIFT = 3,
+ PLL_SSMOD_DIVVAL_MASK = 0Xf,
+ PLL_SSMOD_DIVVAL_SHIFT = 4,
+ PLL_SSMOD_SPREADAMP_MASK = 0x1f,
+ PLL_SSMOD_SPREADAMP_SHIFT = 8,
+
/* PMUCRU_CLKSEL_CON0 */
PMU_PCLK_DIV_CON_MASK = 0x1f,
PMU_PCLK_DIV_CON_SHIFT = 0,
@@ -326,6 +341,83 @@ static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
PLL_MODE_NORM << PLL_MODE_SHIFT));
}
+/*
+ * Configure the DPLL spread spectrum feature on memory clock.
+ * Configure sequence:
+ * 1. PLL been configured as frac mode, and DACPD should be set to 1’b0.
+ * 2. Configure DOWNSPERAD, SPREAD, DIVVAL(option: configure xPLL_CON5 with
+ * extern wave table).
+ * 3. set ssmod_disable_sscg = 1’b0, and set ssmod_bp = 1’b0.
+ * 4. Assert RESET = 1’b1 to SSMOD.
+ * 5. RESET = 1’b0 on SSMOD.
+ * 6. Adjust SPREAD/DIVVAL/DOWNSPREAD.
+ */
+static void rkclk_set_dpllssc(struct pll_div *dpll_cfg)
+{
+ u32 divval;
+
+ /*
+ * TODO find the root cause why is the delay needed, otherwise sometimes
+ * hang somewhere with reboot tests.
+ */
+ udelay(30);
+ assert(dpll_cfg->refdiv && dpll_cfg->refdiv <= 6);
+
+ /*
+ * Need to acquire ~30kHZ which is the target modulation frequency.
+ * The modulation frequency ~ 30kHz= OSC_HZ/revdiv/128/divval
+ * (the 128 is the number points in the query table).
+ */
+ divval = OSC_HZ / 128 / (30 * KHz) / dpll_cfg->refdiv;
+
+ /*
+ * Use frac mode.
+ * Make sure the output frequency isn't offset, set 0 for Fractional
+ * part of feedback divide.
+ */
+ write32(&cru_ptr->dpll_con[3],
+ RK_CLRSETBITS(PLL_DSMPD_MASK << PLL_DSMPD_SHIFT,
+ PLL_FRAC_MODE << PLL_DSMPD_SHIFT));
+ clrsetbits_le32(&cru_ptr->dpll_con[2],
+ PLL_FRACDIV_MASK << PLL_FRACDIV_SHIFT,
+ 0 << PLL_FRACDIV_SHIFT);
+
+ /*
+ * Configure SSC divval.
+ * Spread amplitude range = 0.1 * SPREAD[4:0] (%).
+ * The below 8 means SPREAD[4:0] that appears to mitigate EMI on boards
+ * tested. Center and down spread modulation amplitudes based on the
+ * value of SPREAD.
+ * SPREAD[4:0] Center Spread Down Spread
+ * 0 0 0
+ * 1 ±0.1% -0.10%
+ * 2 ±0.2% -0.20%
+ * 3 ±0.3% -0.30%
+ * 4 ±0.4% -0.40%
+ * 5 ±0.5% -0.50%
+ * ...
+ * 31 ±3.1% -3.10%
+ */
+ write32(&cru_ptr->dpll_con[4],
+ RK_CLRSETBITS(PLL_SSMOD_DIVVAL_MASK << PLL_SSMOD_DIVVAL_SHIFT,
+ divval << PLL_SSMOD_DIVVAL_SHIFT));
+ write32(&cru_ptr->dpll_con[4],
+ RK_CLRSETBITS(PLL_SSMOD_SPREADAMP_MASK <<
+ PLL_SSMOD_SPREADAMP_SHIFT,
+ 8 << PLL_SSMOD_SPREADAMP_SHIFT));
+
+ /* Enable SSC for DPLL */
+ write32(&cru_ptr->dpll_con[4],
+ RK_CLRBITS(PLL_SSMOD_BP_MASK << PLL_SSMOD_BP_SHIFT |
+ PLL_SSMOD_DIS_SSCG_MASK << PLL_SSMOD_DIS_SSCG_SHIFT));
+
+ /* Deassert reset SSMOD */
+ write32(&cru_ptr->dpll_con[4],
+ RK_CLRBITS(PLL_SSMOD_RESET_MASK << PLL_SSMOD_RESET_SHIFT));
+
+ udelay(20);
+}
+
static int pll_para_config(u32 freq_hz, struct pll_div *div)
{
u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0;
@@ -571,6 +663,9 @@ void rkclk_configure_ddr(unsigned int hz)
die("Unsupported SDRAM frequency, add to clock.c!");
}
rkclk_set_pll(&cru_ptr->dpll_con[0], &dpll_cfg);
+
+ if (IS_ENABLED(CONFIG_RK3399_SPREAD_SPECTRUM_DDR))
+ rkclk_set_dpllssc(&dpll_cfg);
}
#define SPI_CLK_REG_VALUE(bus, clk_div) \