diff options
Diffstat (limited to 'src/soc/samsung/exynos5250/usb.c')
-rw-r--r-- | src/soc/samsung/exynos5250/usb.c | 43 |
1 files changed, 36 insertions, 7 deletions
diff --git a/src/soc/samsung/exynos5250/usb.c b/src/soc/samsung/exynos5250/usb.c index 3f6833657b..2dca58e553 100644 --- a/src/soc/samsung/exynos5250/usb.c +++ b/src/soc/samsung/exynos5250/usb.c @@ -52,12 +52,22 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3) /* Set relevant registers to default values (clearing all reset bits) */ write32(&dwc3->usb3pipectl, - 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0); + 0x1 << 24 | /* activate PHY low power states */ + 0x4 << 19 | /* low power delay value */ + 0x1 << 18 | /* activate PHY low power delay */ + 0x1 << 17 | /* enable SuperSpeed PHY suspend */ + 0x1 << 1); /* default Tx deemphasis value */ /* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */ - write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0); - - write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0); + write32(&dwc3->usb2phycfg, + 0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */ + 0x1 << 8 | /* enable PHY sleep in L1 */ + 0x1 << 6); /* enable PHY suspend */ + + write32(&dwc3->ctl, + 0x5dc << 19 | /* suspend clock scale for 24MHz */ + 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */ + 0x1 << 12); /* port capability HOST */ } void setup_usb_drd_dwc3() @@ -77,13 +87,32 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy) write32(&phy->utmi, 1 << 6); write32(&phy->clkrst, - 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0); + 0x88 << 23 | /* spread spectrum refclk selector */ + 0x1 << 20 | /* enable spread spectrum */ + 0x1 << 19 | /* enable prescaler refclk */ + 0x68 << 11 | /* multiplier for 24MHz refclk */ + 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */ + 0x1 << 4 | /* power supply in normal operating mode */ + 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/ + 0x1 << 1 | /* force port reset */ + 0x1 << 0); /* normal operating mode */ write32(&phy->param0, - 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0); + 0x9 << 26 | /* LOS level */ + 0x3 << 22 | /* TX VREF tune */ + 0x1 << 20 | /* TX rise tune */ + 0x1 << 18 | /* TX res tune */ + 0x3 << 13 | /* TX HS X Vtune */ + 0x3 << 9 | /* TX FS/LS tune */ + 0x3 << 6 | /* SQRX tune */ + 0x4 << 3 | /* OTG tune */ + 0x4 << 0); /* comp disc tune */ write32(&phy->param1, - 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0); + 0x7f << 19 | /* reserved */ + 0x7f << 12 | /* Tx launch amplitude */ + 0x20 << 6 | /* Tx deemphasis 6dB */ + 0x1c << 0); /* Tx deemphasis 3.5dB (value from U-Boot) */ /* disable all test features */ write32(&phy->test, 0); |