summaryrefslogtreecommitdiff
path: root/src/soc/samsung
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/samsung')
-rw-r--r--src/soc/samsung/exynos5250/clock.c66
-rw-r--r--src/soc/samsung/exynos5250/clock_init.c212
-rw-r--r--src/soc/samsung/exynos5250/cpu.c2
-rw-r--r--src/soc/samsung/exynos5250/dmc_common.c50
-rw-r--r--src/soc/samsung/exynos5250/dmc_init_ddr3.c129
-rw-r--r--src/soc/samsung/exynos5250/dp-reg.c192
-rw-r--r--src/soc/samsung/exynos5250/fb.c52
-rw-r--r--src/soc/samsung/exynos5250/gpio.c28
-rw-r--r--src/soc/samsung/exynos5250/i2c.c34
-rw-r--r--src/soc/samsung/exynos5250/power.c2
-rw-r--r--src/soc/samsung/exynos5250/spi.c18
-rw-r--r--src/soc/samsung/exynos5250/timer.c7
-rw-r--r--src/soc/samsung/exynos5250/tmu.c20
-rw-r--r--src/soc/samsung/exynos5250/trustzone.c10
-rw-r--r--src/soc/samsung/exynos5250/uart.c22
-rw-r--r--src/soc/samsung/exynos5250/usb.c69
-rw-r--r--src/soc/samsung/exynos5420/clock.c92
-rw-r--r--src/soc/samsung/exynos5420/clock_init.c200
-rw-r--r--src/soc/samsung/exynos5420/dmc_common.c42
-rw-r--r--src/soc/samsung/exynos5420/dmc_init_ddr3.c200
-rw-r--r--src/soc/samsung/exynos5420/dp_lowlevel.c2
-rw-r--r--src/soc/samsung/exynos5420/fimd.c4
-rw-r--r--src/soc/samsung/exynos5420/gpio.c28
-rw-r--r--src/soc/samsung/exynos5420/i2c.c72
-rw-r--r--src/soc/samsung/exynos5420/power.c2
-rw-r--r--src/soc/samsung/exynos5420/smp.c22
-rw-r--r--src/soc/samsung/exynos5420/spi.c18
-rw-r--r--src/soc/samsung/exynos5420/timer.c7
-rw-r--r--src/soc/samsung/exynos5420/tmu.c20
-rw-r--r--src/soc/samsung/exynos5420/trustzone.c10
-rw-r--r--src/soc/samsung/exynos5420/uart.c20
-rw-r--r--src/soc/samsung/exynos5420/usb.c69
32 files changed, 825 insertions, 896 deletions
diff --git a/src/soc/samsung/exynos5250/clock.c b/src/soc/samsung/exynos5250/clock.c
index 0986f8b9bd..89001ecf14 100644
--- a/src/soc/samsung/exynos5250/clock.c
+++ b/src/soc/samsung/exynos5250/clock.c
@@ -178,21 +178,21 @@ unsigned long get_pll_clk(int pllreg)
switch (pllreg) {
case APLL:
- r = readl(&exynos_clock->apll_con0);
+ r = read32(&exynos_clock->apll_con0);
break;
case BPLL:
- r = readl(&exynos_clock->bpll_con0);
+ r = read32(&exynos_clock->bpll_con0);
break;
case MPLL:
- r = readl(&exynos_clock->mpll_con0);
+ r = read32(&exynos_clock->mpll_con0);
break;
case EPLL:
- r = readl(&exynos_clock->epll_con0);
- k = readl(&exynos_clock->epll_con1);
+ r = read32(&exynos_clock->epll_con0);
+ k = read32(&exynos_clock->epll_con1);
break;
case VPLL:
- r = readl(&exynos_clock->vpll_con0);
- k = readl(&exynos_clock->vpll_con1);
+ r = read32(&exynos_clock->vpll_con0);
+ k = read32(&exynos_clock->vpll_con1);
break;
default:
printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
@@ -246,41 +246,41 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
- src = readl(&exynos_clock->src_peric0);
- div = readl(&exynos_clock->div_peric0);
+ src = read32(&exynos_clock->src_peric0);
+ div = read32(&exynos_clock->div_peric0);
break;
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
- src = readl(&exynos_clock->src_peric0);
- div = readl(&exynos_clock->div_peric3);
+ src = read32(&exynos_clock->src_peric0);
+ div = read32(&exynos_clock->div_peric3);
break;
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
- src = readl(&exynos_clock->src_peric1);
- div = readl(&exynos_clock->div_peric1);
+ src = read32(&exynos_clock->src_peric1);
+ div = read32(&exynos_clock->div_peric1);
break;
case PERIPH_ID_SPI2:
- src = readl(&exynos_clock->src_peric1);
- div = readl(&exynos_clock->div_peric2);
+ src = read32(&exynos_clock->src_peric1);
+ div = read32(&exynos_clock->div_peric2);
break;
case PERIPH_ID_SPI3:
case PERIPH_ID_SPI4:
- src = readl(&exynos_clock->sclk_src_isp);
- div = readl(&exynos_clock->sclk_div_isp);
+ src = read32(&exynos_clock->sclk_src_isp);
+ div = read32(&exynos_clock->sclk_div_isp);
break;
case PERIPH_ID_SATA:
- src = readl(&exynos_clock->src_fsys);
- div = readl(&exynos_clock->div_fsys0);
+ src = read32(&exynos_clock->src_fsys);
+ div = read32(&exynos_clock->div_fsys0);
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC2:
case PERIPH_ID_SDMMC3:
- src = readl(&exynos_clock->src_fsys);
- div = readl(&exynos_clock->div_fsys1);
+ src = read32(&exynos_clock->src_fsys);
+ div = read32(&exynos_clock->div_fsys1);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -291,9 +291,9 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
case PERIPH_ID_I2C6:
case PERIPH_ID_I2C7:
sclk = get_pll_clk(MPLL);
- sub_div = ((readl(&exynos_clock->div_top1)
+ sub_div = ((read32(&exynos_clock->div_top1)
>> bit_info->div_bit) & 0x7) + 1;
- div = ((readl(&exynos_clock->div_top0)
+ div = ((read32(&exynos_clock->div_top0)
>> bit_info->prediv_bit) & 0x7) + 1;
return (sclk / sub_div) / div;
default:
@@ -337,7 +337,7 @@ unsigned long get_arm_clk(void)
unsigned int arm_ratio;
unsigned int arm2_ratio;
- div = readl(&exynos_clock->div_cpu0);
+ div = read32(&exynos_clock->div_cpu0);
/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
arm_ratio = (div >> 0) & 0x7;
@@ -383,10 +383,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
dev_index -= 2;
}
- val = readl(addr);
+ val = read32(addr);
val &= ~(0xff << ((dev_index << 4) + 8));
val |= (div & 0xff) << ((dev_index << 4) + 8);
- writel(val, addr);
+ write32(addr, val);
}
void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor)
@@ -582,10 +582,10 @@ int clock_set_mshci(enum periph_id peripheral)
printk(BIOS_DEBUG, "invalid peripheral\n");
return -1;
}
- tmp = readl(addr) & ~0xff0f;
+ tmp = read32(addr) & ~0xff0f;
for (i = 0; i <= 0xf; i++) {
if ((clock / (i + 1)) <= 400) {
- writel(tmp | i << 0, addr);
+ write32(addr, tmp | i << 0);
break;
}
}
@@ -599,7 +599,7 @@ int clock_epll_set_rate(unsigned long rate)
unsigned int lockcnt;
struct stopwatch sw;
- epll_con = readl(&exynos_clock->epll_con0);
+ epll_con = read32(&exynos_clock->epll_con0);
epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
EPLL_CON0_LOCK_DET_EN_SHIFT) |
EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
@@ -627,13 +627,13 @@ int clock_epll_set_rate(unsigned long rate)
*/
lockcnt = 3000 * epll_div[i].p_div;
- writel(lockcnt, &exynos_clock->epll_lock);
- writel(epll_con, &exynos_clock->epll_con0);
- writel(epll_con_k, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_lock, lockcnt);
+ write32(&exynos_clock->epll_con0, epll_con);
+ write32(&exynos_clock->epll_con1, epll_con_k);
stopwatch_init_msecs_expire(&sw, TIMEOUT_EPLL_LOCK);
- while (!(readl(&exynos_clock->epll_con0) &
+ while (!(read32(&exynos_clock->epll_con0) &
(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
if (stopwatch_expired(&sw)) {
printk(BIOS_DEBUG,
diff --git a/src/soc/samsung/exynos5250/clock_init.c b/src/soc/samsung/exynos5250/clock_init.c
index 409230180b..9cdd729f57 100644
--- a/src/soc/samsung/exynos5250/clock_init.c
+++ b/src/soc/samsung/exynos5250/clock_init.c
@@ -35,12 +35,12 @@ void system_clock_init(struct mem_timings *mem,
clrbits_le32(&exynos_clock->src_cpu, MUX_APLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cpu);
+ val = read32(&exynos_clock->mux_stat_cpu);
} while ((val | MUX_APLL_SEL_MASK) != val);
clrbits_le32(&exynos_clock->src_core1, MUX_MPLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_core1);
+ val = read32(&exynos_clock->mux_stat_core1);
} while ((val | MUX_MPLL_SEL_MASK) != val);
clrbits_le32(&exynos_clock->src_top2, MUX_CPLL_SEL_MASK);
@@ -50,34 +50,34 @@ void system_clock_init(struct mem_timings *mem,
tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
| MUX_GPLL_SEL_MASK;
do {
- val = readl(&exynos_clock->mux_stat_top2);
+ val = read32(&exynos_clock->mux_stat_top2);
} while ((val | tmp) != val);
clrbits_le32(&exynos_clock->src_cdrex, MUX_BPLL_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cdrex);
+ val = read32(&exynos_clock->mux_stat_cdrex);
} while ((val | MUX_BPLL_SEL_MASK) != val);
/* PLL locktime */
- writel(APLL_LOCK_VAL, &exynos_clock->apll_lock);
+ write32(&exynos_clock->apll_lock, APLL_LOCK_VAL);
- writel(MPLL_LOCK_VAL, &exynos_clock->mpll_lock);
+ write32(&exynos_clock->mpll_lock, MPLL_LOCK_VAL);
- writel(BPLL_LOCK_VAL, &exynos_clock->bpll_lock);
+ write32(&exynos_clock->bpll_lock, BPLL_LOCK_VAL);
- writel(CPLL_LOCK_VAL, &exynos_clock->cpll_lock);
+ write32(&exynos_clock->cpll_lock, CPLL_LOCK_VAL);
- writel(GPLL_LOCK_VAL, &exynos_clock->gpll_lock);
+ write32(&exynos_clock->gpll_lock, GPLL_LOCK_VAL);
- writel(EPLL_LOCK_VAL, &exynos_clock->epll_lock);
+ write32(&exynos_clock->epll_lock, EPLL_LOCK_VAL);
- writel(VPLL_LOCK_VAL, &exynos_clock->vpll_lock);
+ write32(&exynos_clock->vpll_lock, VPLL_LOCK_VAL);
- writel(CLK_REG_DISABLE, &exynos_clock->pll_div2_sel);
+ write32(&exynos_clock->pll_div2_sel, CLK_REG_DISABLE);
- writel(MUX_HPM_SEL_MASK, &exynos_clock->src_cpu);
+ write32(&exynos_clock->src_cpu, MUX_HPM_SEL_MASK);
do {
- val = readl(&exynos_clock->mux_stat_cpu);
+ val = read32(&exynos_clock->mux_stat_cpu);
} while ((val | HPM_SEL_SCLK_MPLL) != val);
val = arm_clk_ratio->arm2_ratio << 28
@@ -88,35 +88,35 @@ void system_clock_init(struct mem_timings *mem,
| arm_clk_ratio->acp_ratio << 8
| arm_clk_ratio->cpud_ratio << 4
| arm_clk_ratio->arm_ratio;
- writel(val, &exynos_clock->div_cpu0);
+ write32(&exynos_clock->div_cpu0, val);
do {
- val = readl(&exynos_clock->div_stat_cpu0);
+ val = read32(&exynos_clock->div_stat_cpu0);
} while (0 != val);
- writel(CLK_DIV_CPU1_VAL, &exynos_clock->div_cpu1);
+ write32(&exynos_clock->div_cpu1, CLK_DIV_CPU1_VAL);
do {
- val = readl(&exynos_clock->div_stat_cpu1);
+ val = read32(&exynos_clock->div_stat_cpu1);
} while (0 != val);
/* switch A15 clock source to OSC clock before changing APLL */
clrbits_le32(&exynos_clock->src_cpu, APLL_FOUT);
/* Set APLL */
- writel(APLL_CON1_VAL, &exynos_clock->apll_con1);
+ write32(&exynos_clock->apll_con1, APLL_CON1_VAL);
val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
arm_clk_ratio->apll_sdiv);
- writel(val, &exynos_clock->apll_con0);
- while ((readl(&exynos_clock->apll_con0) & APLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->apll_con0, val);
+ while ((read32(&exynos_clock->apll_con0) & APLL_CON0_LOCKED) == 0)
;
/* now it is safe to switch to APLL */
setbits_le32(&exynos_clock->src_cpu, APLL_FOUT);
/* Set MPLL */
- writel(MPLL_CON1_VAL, &exynos_clock->mpll_con1);
+ write32(&exynos_clock->mpll_con1, MPLL_CON1_VAL);
val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
- writel(val, &exynos_clock->mpll_con0);
- while ((readl(&exynos_clock->mpll_con0) & MPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->mpll_con0, val);
+ while ((read32(&exynos_clock->mpll_con0) & MPLL_CON0_LOCKED) == 0)
;
/*
@@ -127,159 +127,159 @@ void system_clock_init(struct mem_timings *mem,
/* Set BPLL */
if (mem->use_bpll) {
- writel(BPLL_CON1_VAL, &exynos_clock->bpll_con1);
+ write32(&exynos_clock->bpll_con1, BPLL_CON1_VAL);
val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
- writel(val, &exynos_clock->bpll_con0);
- while ((readl(&exynos_clock->bpll_con0) & BPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->bpll_con0, val);
+ while ((read32(&exynos_clock->bpll_con0) & BPLL_CON0_LOCKED) == 0)
;
setbits_le32(&exynos_clock->pll_div2_sel, MUX_BPLL_FOUT_SEL);
}
/* Set CPLL */
- writel(CPLL_CON1_VAL, &exynos_clock->cpll_con1);
+ write32(&exynos_clock->cpll_con1, CPLL_CON1_VAL);
val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
- writel(val, &exynos_clock->cpll_con0);
- while ((readl(&exynos_clock->cpll_con0) & CPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->cpll_con0, val);
+ while ((read32(&exynos_clock->cpll_con0) & CPLL_CON0_LOCKED) == 0)
;
/* Set GPLL */
- writel(GPLL_CON1_VAL, &exynos_clock->gpll_con1);
+ write32(&exynos_clock->gpll_con1, GPLL_CON1_VAL);
val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
- writel(val, &exynos_clock->gpll_con0);
- while ((readl(&exynos_clock->gpll_con0) & GPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->gpll_con0, val);
+ while ((read32(&exynos_clock->gpll_con0) & GPLL_CON0_LOCKED) == 0)
;
/* Set EPLL */
- writel(EPLL_CON2_VAL, &exynos_clock->epll_con2);
- writel(EPLL_CON1_VAL, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_con2, EPLL_CON2_VAL);
+ write32(&exynos_clock->epll_con1, EPLL_CON1_VAL);
val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
- writel(val, &exynos_clock->epll_con0);
- while ((readl(&exynos_clock->epll_con0) & EPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->epll_con0, val);
+ while ((read32(&exynos_clock->epll_con0) & EPLL_CON0_LOCKED) == 0)
;
/* Set VPLL */
- writel(VPLL_CON2_VAL, &exynos_clock->vpll_con2);
- writel(VPLL_CON1_VAL, &exynos_clock->vpll_con1);
+ write32(&exynos_clock->vpll_con2, VPLL_CON2_VAL);
+ write32(&exynos_clock->vpll_con1, VPLL_CON1_VAL);
val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
- writel(val, &exynos_clock->vpll_con0);
- while ((readl(&exynos_clock->vpll_con0) & VPLL_CON0_LOCKED) == 0)
+ write32(&exynos_clock->vpll_con0, val);
+ while ((read32(&exynos_clock->vpll_con0) & VPLL_CON0_LOCKED) == 0)
;
- writel(CLK_SRC_CORE0_VAL, &exynos_clock->src_core0);
- writel(CLK_DIV_CORE0_VAL, &exynos_clock->div_core0);
- while (readl(&exynos_clock->div_stat_core0) != 0)
+ write32(&exynos_clock->src_core0, CLK_SRC_CORE0_VAL);
+ write32(&exynos_clock->div_core0, CLK_DIV_CORE0_VAL);
+ while (read32(&exynos_clock->div_stat_core0) != 0)
;
- writel(CLK_DIV_CORE1_VAL, &exynos_clock->div_core1);
- while (readl(&exynos_clock->div_stat_core1) != 0)
+ write32(&exynos_clock->div_core1, CLK_DIV_CORE1_VAL);
+ while (read32(&exynos_clock->div_stat_core1) != 0)
;
- writel(CLK_DIV_SYSRGT_VAL, &exynos_clock->div_sysrgt);
- while (readl(&exynos_clock->div_stat_sysrgt) != 0)
+ write32(&exynos_clock->div_sysrgt, CLK_DIV_SYSRGT_VAL);
+ while (read32(&exynos_clock->div_stat_sysrgt) != 0)
;
- writel(CLK_DIV_ACP_VAL, &exynos_clock->div_acp);
- while (readl(&exynos_clock->div_stat_acp) != 0)
+ write32(&exynos_clock->div_acp, CLK_DIV_ACP_VAL);
+ while (read32(&exynos_clock->div_stat_acp) != 0)
;
- writel(CLK_DIV_SYSLFT_VAL, &exynos_clock->div_syslft);
- while (readl(&exynos_clock->div_stat_syslft) != 0)
+ write32(&exynos_clock->div_syslft, CLK_DIV_SYSLFT_VAL);
+ while (read32(&exynos_clock->div_stat_syslft) != 0)
;
- writel(CLK_SRC_TOP0_VAL, &exynos_clock->src_top0);
- writel(CLK_SRC_TOP1_VAL, &exynos_clock->src_top1);
- writel(TOP2_VAL, &exynos_clock->src_top2);
- writel(CLK_SRC_TOP3_VAL, &exynos_clock->src_top3);
+ write32(&exynos_clock->src_top0, CLK_SRC_TOP0_VAL);
+ write32(&exynos_clock->src_top1, CLK_SRC_TOP1_VAL);
+ write32(&exynos_clock->src_top2, TOP2_VAL);
+ write32(&exynos_clock->src_top3, CLK_SRC_TOP3_VAL);
- writel(CLK_DIV_TOP0_VAL, &exynos_clock->div_top0);
- while (readl(&exynos_clock->div_stat_top0))
+ write32(&exynos_clock->div_top0, CLK_DIV_TOP0_VAL);
+ while (read32(&exynos_clock->div_stat_top0))
;
- writel(CLK_DIV_TOP1_VAL, &exynos_clock->div_top1);
- while (readl(&exynos_clock->div_stat_top1))
+ write32(&exynos_clock->div_top1, CLK_DIV_TOP1_VAL);
+ while (read32(&exynos_clock->div_stat_top1))
;
- writel(CLK_SRC_LEX_VAL, &exynos_clock->src_lex);
+ write32(&exynos_clock->src_lex, CLK_SRC_LEX_VAL);
while (1) {
- val = readl(&exynos_clock->mux_stat_lex);
+ val = read32(&exynos_clock->mux_stat_lex);
if (val == (val | 1))
break;
}
- writel(CLK_DIV_LEX_VAL, &exynos_clock->div_lex);
- while (readl(&exynos_clock->div_stat_lex))
+ write32(&exynos_clock->div_lex, CLK_DIV_LEX_VAL);
+ while (read32(&exynos_clock->div_stat_lex))
;
- writel(CLK_DIV_R0X_VAL, &exynos_clock->div_r0x);
- while (readl(&exynos_clock->div_stat_r0x))
+ write32(&exynos_clock->div_r0x, CLK_DIV_R0X_VAL);
+ while (read32(&exynos_clock->div_stat_r0x))
;
- writel(CLK_DIV_R0X_VAL, &exynos_clock->div_r0x);
- while (readl(&exynos_clock->div_stat_r0x))
+ write32(&exynos_clock->div_r0x, CLK_DIV_R0X_VAL);
+ while (read32(&exynos_clock->div_stat_r0x))
;
- writel(CLK_DIV_R1X_VAL, &exynos_clock->div_r1x);
- while (readl(&exynos_clock->div_stat_r1x))
+ write32(&exynos_clock->div_r1x, CLK_DIV_R1X_VAL);
+ while (read32(&exynos_clock->div_stat_r1x))
;
if (mem->use_bpll) {
- writel(MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL |
- MUX_MCLK_DPHY_SEL, &exynos_clock->src_cdrex);
+ write32(&exynos_clock->src_cdrex,
+ MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL | MUX_MCLK_DPHY_SEL);
} else {
- writel(CLK_REG_DISABLE, &exynos_clock->src_cdrex);
+ write32(&exynos_clock->src_cdrex, CLK_REG_DISABLE);
}
- writel(CLK_DIV_CDREX_VAL, &exynos_clock->div_cdrex);
- while (readl(&exynos_clock->div_stat_cdrex))
+ write32(&exynos_clock->div_cdrex, CLK_DIV_CDREX_VAL);
+ while (read32(&exynos_clock->div_stat_cdrex))
;
- val = readl(&exynos_clock->src_cpu);
+ val = read32(&exynos_clock->src_cpu);
val |= CLK_SRC_CPU_VAL;
- writel(val, &exynos_clock->src_cpu);
+ write32(&exynos_clock->src_cpu, val);
- val = readl(&exynos_clock->src_top2);
+ val = read32(&exynos_clock->src_top2);
val |= CLK_SRC_TOP2_VAL;
- writel(val, &exynos_clock->src_top2);
+ write32(&exynos_clock->src_top2, val);
- val = readl(&exynos_clock->src_core1);
+ val = read32(&exynos_clock->src_core1);
val |= CLK_SRC_CORE1_VAL;
- writel(val, &exynos_clock->src_core1);
+ write32(&exynos_clock->src_core1, val);
- writel(CLK_SRC_FSYS0_VAL, &exynos_clock->src_fsys);
- writel(CLK_DIV_FSYS0_VAL, &exynos_clock->div_fsys0);
- while (readl(&exynos_clock->div_stat_fsys0))
+ write32(&exynos_clock->src_fsys, CLK_SRC_FSYS0_VAL);
+ write32(&exynos_clock->div_fsys0, CLK_DIV_FSYS0_VAL);
+ while (read32(&exynos_clock->div_stat_fsys0))
;
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_cpu);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_core);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_acp);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_top);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_lex);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_r0x);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_r1x);
- writel(CLK_REG_DISABLE, &exynos_clock->clkout_cmu_cdrex);
-
- writel(CLK_SRC_PERIC0_VAL, &exynos_clock->src_peric0);
- writel(CLK_DIV_PERIC0_VAL, &exynos_clock->div_peric0);
-
- writel(CLK_SRC_PERIC1_VAL, &exynos_clock->src_peric1);
- writel(CLK_DIV_PERIC1_VAL, &exynos_clock->div_peric1);
- writel(CLK_DIV_PERIC2_VAL, &exynos_clock->div_peric2);
- writel(SCLK_SRC_ISP_VAL, &exynos_clock->sclk_src_isp);
- writel(SCLK_DIV_ISP_VAL, &exynos_clock->sclk_div_isp);
- writel(CLK_DIV_ISP0_VAL, &exynos_clock->div_isp0);
- writel(CLK_DIV_ISP1_VAL, &exynos_clock->div_isp1);
- writel(CLK_DIV_ISP2_VAL, &exynos_clock->div_isp2);
+ write32(&exynos_clock->clkout_cmu_cpu, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_core, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_acp, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_top, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_lex, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_r0x, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_r1x, CLK_REG_DISABLE);
+ write32(&exynos_clock->clkout_cmu_cdrex, CLK_REG_DISABLE);
+
+ write32(&exynos_clock->src_peric0, CLK_SRC_PERIC0_VAL);
+ write32(&exynos_clock->div_peric0, CLK_DIV_PERIC0_VAL);
+
+ write32(&exynos_clock->src_peric1, CLK_SRC_PERIC1_VAL);
+ write32(&exynos_clock->div_peric1, CLK_DIV_PERIC1_VAL);
+ write32(&exynos_clock->div_peric2, CLK_DIV_PERIC2_VAL);
+ write32(&exynos_clock->sclk_src_isp, SCLK_SRC_ISP_VAL);
+ write32(&exynos_clock->sclk_div_isp, SCLK_DIV_ISP_VAL);
+ write32(&exynos_clock->div_isp0, CLK_DIV_ISP0_VAL);
+ write32(&exynos_clock->div_isp1, CLK_DIV_ISP1_VAL);
+ write32(&exynos_clock->div_isp2, CLK_DIV_ISP2_VAL);
/* FIMD1 SRC CLK SELECTION */
- writel(CLK_SRC_DISP1_0_VAL, &exynos_clock->src_disp1_0);
+ write32(&exynos_clock->src_disp1_0, CLK_SRC_DISP1_0_VAL);
val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
- writel(val, &exynos_clock->div_fsys2);
+ write32(&exynos_clock->div_fsys2, val);
}
void clock_gate(void)
diff --git a/src/soc/samsung/exynos5250/cpu.c b/src/soc/samsung/exynos5250/cpu.c
index cff1466a64..d9f001a57f 100644
--- a/src/soc/samsung/exynos5250/cpu.c
+++ b/src/soc/samsung/exynos5250/cpu.c
@@ -38,7 +38,7 @@ static unsigned int cpu_rev;
static void set_cpu_id(void)
{
- cpu_id = readl((void *)EXYNOS5_PRO_ID);
+ cpu_id = read32((void *)EXYNOS5_PRO_ID);
cpu_id = (0xC000 | ((cpu_id & 0x00FFF000) >> 12));
/*
diff --git a/src/soc/samsung/exynos5250/dmc_common.c b/src/soc/samsung/exynos5250/dmc_common.c
index 17dff1ec92..2e64905d9d 100644
--- a/src/soc/samsung/exynos5250/dmc_common.c
+++ b/src/soc/samsung/exynos5250/dmc_common.c
@@ -45,19 +45,19 @@ int dmc_config_zq(struct mem_timings *mem,
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
@@ -67,22 +67,22 @@ int dmc_config_zq(struct mem_timings *mem,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy0_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy1_ctrl->phy_con16, val);
return 0;
}
@@ -93,18 +93,18 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
/* Update DLL Information: Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val |= FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
/* Reset Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val &= ~FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
@@ -121,7 +121,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
- writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_NOP | mask);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
@@ -132,15 +132,15 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
- writel(mem->direct_cmd_msr[i] | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ mem->direct_cmd_msr[i] | mask);
udelay(100);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
- writel(DIRECT_CMD_ZQINIT | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ DIRECT_CMD_ZQINIT | mask);
/*
* FIXME: This was originally sdelay(10000)
* in the imported u-boot code. That may have
@@ -166,7 +166,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
- writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_PALL | mask);
udelay(100);
}
}
@@ -174,8 +174,8 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
{
- writel(mem->memconfig, &dmc->memconfig0);
- writel(mem->memconfig, &dmc->memconfig1);
- writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
- writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
+ write32(&dmc->memconfig0, mem->memconfig);
+ write32(&dmc->memconfig1, mem->memconfig);
+ write32(&dmc->membaseconfig0, DMC_MEMBASECONFIG0_VAL);
+ write32(&dmc->membaseconfig1, DMC_MEMBASECONFIG1_VAL);
}
diff --git a/src/soc/samsung/exynos5250/dmc_init_ddr3.c b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
index 3b26c206c1..5a3cf3ef06 100644
--- a/src/soc/samsung/exynos5250/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5250/dmc_init_ddr3.c
@@ -31,8 +31,10 @@
static void reset_phy_ctrl(void)
{
- writel(LPDDR3PHY_CTRL_PHY_RESET_ENABLE, &exynos_clock->lpddr3phy_ctrl);
- writel(LPDDR3PHY_CTRL_PHY_RESET_DISABLE, &exynos_clock->lpddr3phy_ctrl);
+ write32(&exynos_clock->lpddr3phy_ctrl,
+ LPDDR3PHY_CTRL_PHY_RESET_ENABLE);
+ write32(&exynos_clock->lpddr3phy_ctrl,
+ LPDDR3PHY_CTRL_PHY_RESET_DISABLE);
#if 0
/*
@@ -65,14 +67,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
(mem->impedance << CA_CS_DRVR_DS_OFFSET) |
(mem->impedance << CA_ADR_DRVR_DS_OFFSET);
- writel(val, &exynos_phy0_control->phy_con39);
- writel(val, &exynos_phy1_control->phy_con39);
+ write32(&exynos_phy0_control->phy_con39, val);
+ write32(&exynos_phy1_control->phy_con39, val);
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
- writel(val, &exynos_phy0_control->phy_con42);
- writel(val, &exynos_phy1_control->phy_con42);
+ write32(&exynos_phy0_control->phy_con42, val);
+ write32(&exynos_phy1_control->phy_con42, val);
/* ZQ Calibration */
if (dmc_config_zq(mem, exynos_phy0_control, exynos_phy1_control)){
@@ -81,71 +83,69 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
}
/* DQ Signal */
- writel(mem->phy0_pulld_dqs, &exynos_phy0_control->phy_con14);
- writel(mem->phy1_pulld_dqs, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, mem->phy0_pulld_dqs);
+ write32(&exynos_phy1_control->phy_con14, mem->phy1_pulld_dqs);
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
- | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT));
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
/* DQS Signal */
- writel(mem->phy0_dqs, &exynos_phy0_control->phy_con4);
- writel(mem->phy1_dqs, &exynos_phy1_control->phy_con4);
+ write32(&exynos_phy0_control->phy_con4, mem->phy0_dqs);
+ write32(&exynos_phy1_control->phy_con4, mem->phy1_dqs);
- writel(mem->phy0_dq, &exynos_phy0_control->phy_con6);
- writel(mem->phy1_dq, &exynos_phy1_control->phy_con6);
+ write32(&exynos_phy0_control->phy_con6, mem->phy0_dq);
+ write32(&exynos_phy1_control->phy_con6, mem->phy1_dq);
- writel(mem->phy0_tFS, &exynos_phy0_control->phy_con10);
- writel(mem->phy1_tFS, &exynos_phy1_control->phy_con10);
+ write32(&exynos_phy0_control->phy_con10, mem->phy0_tFS);
+ write32(&exynos_phy1_control->phy_con10, mem->phy1_tFS);
val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
/* Start DLL locking */
- writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &exynos_phy0_control->phy_con12);
- writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12,
+ val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT));
+ write32(&exynos_phy1_control->phy_con12,
+ val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT));
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
/* Memory Channel Inteleaving Size */
- writel(mem->iv_size, &exynos_dmc->ivcontrol);
+ write32(&exynos_dmc->ivcontrol, mem->iv_size);
/* Set DMC MEMCONTROL register */
val = mem->memcontrol & ~DMC_MEMCONTROL_DSREF_ENABLE;
- writel(val, &exynos_dmc->memcontrol);
+ write32(&exynos_dmc->memcontrol, val);
- writel(mem->memconfig, &exynos_dmc->memconfig0);
- writel(mem->memconfig, &exynos_dmc->memconfig1);
- writel(mem->membaseconfig0, &exynos_dmc->membaseconfig0);
- writel(mem->membaseconfig1, &exynos_dmc->membaseconfig1);
+ write32(&exynos_dmc->memconfig0, mem->memconfig);
+ write32(&exynos_dmc->memconfig1, mem->memconfig);
+ write32(&exynos_dmc->membaseconfig0, mem->membaseconfig0);
+ write32(&exynos_dmc->membaseconfig1, mem->membaseconfig1);
/* Precharge Configuration */
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_dmc->prechconfig);
+ write32(&exynos_dmc->prechconfig,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
/* Power Down mode Configuration */
- writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
- mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
- &exynos_dmc->pwrdnconfig);
+ write32(&exynos_dmc->pwrdnconfig,
+ mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingaref
* values as per Memory AC parameters
*/
- writel(mem->timing_ref, &exynos_dmc->timingref);
- writel(mem->timing_row, &exynos_dmc->timingrow);
- writel(mem->timing_data, &exynos_dmc->timingdata);
- writel(mem->timing_power, &exynos_dmc->timingpower);
+ write32(&exynos_dmc->timingref, mem->timing_ref);
+ write32(&exynos_dmc->timingrow, mem->timing_row);
+ write32(&exynos_dmc->timingdata, mem->timing_data);
+ write32(&exynos_dmc->timingpower, mem->timing_power);
/* Send PALL command */
dmc_config_prech(mem, exynos_dmc);
@@ -162,19 +162,19 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
if (mem->gate_leveling_enable) {
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
val |= BYTE_RDLVL_EN;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = (mem->ctrl_start_point <<
PHY_CON12_CTRL_START_POINT_SHIFT) |
@@ -182,30 +182,30 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
val |= RDLVL_GATE_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
val |= BYTE_RDLVL_EN;
val |= CTRL_SHGATE;
- writel(val, &exynos_phy0_control->phy_con0);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
+ write32(&exynos_phy1_control->phy_con0, val);
val = PHY_CON1_RESET_VAL;
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy0_control->phy_con1);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
+ write32(&exynos_phy1_control->phy_con1, val);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_dmc->rdlvl_config);
+ write32(&exynos_dmc->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = RDLVL_COMPLETE_TIMEOUT;
- while ((readl(&exynos_dmc->phystatus) &
+ while ((read32(&exynos_dmc->phystatus) &
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
/*
@@ -219,10 +219,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
printk(BIOS_EMERG, "Timeout on RDLVL. No DRAM.\n");
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
}
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_dmc->rdlvl_config);
+ write32(&exynos_dmc->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(0, &exynos_phy0_control->phy_con14);
- writel(0, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, 0);
+ write32(&exynos_phy1_control->phy_con14, 0);
val = (mem->ctrl_start_point <<
PHY_CON12_CTRL_START_POINT_SHIFT) |
@@ -231,8 +231,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
- writel(val, &exynos_phy0_control->phy_con12);
- writel(val, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, val);
+ write32(&exynos_phy1_control->phy_con12, val);
update_reset_dll(exynos_dmc, DDR_MODE_DDR3);
}
@@ -240,11 +240,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
/* Send PALL command */
dmc_config_prech(mem, exynos_dmc);
- writel(mem->memcontrol, &exynos_dmc->memcontrol);
+ write32(&exynos_dmc->memcontrol, mem->memcontrol);
/* Set DMC Concontrol and enable auto-refresh counter */
- writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
- | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT),
- &exynos_dmc->concontrol);
+ write32(&exynos_dmc->concontrol,
+ mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT));
return 0;
}
diff --git a/src/soc/samsung/exynos5250/dp-reg.c b/src/soc/samsung/exynos5250/dp-reg.c
index a2c0aa482d..75dadba022 100644
--- a/src/soc/samsung/exynos5250/dp-reg.c
+++ b/src/soc/samsung/exynos5250/dp-reg.c
@@ -35,7 +35,7 @@ void s5p_dp_reset(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- writel(RESET_DP_TX, &base->dp_tx_sw_reset);
+ write32(&base->dp_tx_sw_reset, RESET_DP_TX);
/* Stop Video */
clrbits_le32(&base->video_ctl_1, VIDEO_EN);
@@ -44,73 +44,73 @@ void s5p_dp_reset(struct s5p_dp_device *dp)
reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
HDCP_FUNC_EN_N | SW_FUNC_EN_N;
- writel(reg, &base->func_en_1);
+ write32(&base->func_en_1, reg);
reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
SERDES_FIFO_FUNC_EN_N |
LS_CLK_DOMAIN_FUNC_EN_N;
- writel(reg, &base->func_en_2);
+ write32(&base->func_en_2, reg);
udelay(20);
reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
- writel(reg, &base->lane_map);
+ write32(&base->lane_map, reg);
- writel(0x0, &base->sys_ctl_1);
- writel(0x40, &base->sys_ctl_2);
- writel(0x0, &base->sys_ctl_3);
- writel(0x0, &base->sys_ctl_4);
+ write32(&base->sys_ctl_1, 0x0);
+ write32(&base->sys_ctl_2, 0x40);
+ write32(&base->sys_ctl_3, 0x0);
+ write32(&base->sys_ctl_4, 0x0);
- writel(0x0, &base->pkt_send_ctl);
- writel(0x0, &base->dp_hdcp_ctl);
+ write32(&base->pkt_send_ctl, 0x0);
+ write32(&base->dp_hdcp_ctl, 0x0);
- writel(0x5e, &base->dp_hpd_deglitch_l);
- writel(0x1a, &base->dp_hpd_deglitch_h);
+ write32(&base->dp_hpd_deglitch_l, 0x5e);
+ write32(&base->dp_hpd_deglitch_h, 0x1a);
- writel(0x10, &base->dp_debug_ctl);
+ write32(&base->dp_debug_ctl, 0x10);
- writel(0x0, &base->dp_phy_test);
+ write32(&base->dp_phy_test, 0x0);
- writel(0x0, &base->dp_video_fifo_thrd);
- writel(0x20, &base->dp_audio_margin);
+ write32(&base->dp_video_fifo_thrd, 0x0);
+ write32(&base->dp_audio_margin, 0x20);
- writel(0x4, &base->m_vid_gen_filter_th);
- writel(0x2, &base->m_aud_gen_filter_th);
+ write32(&base->m_vid_gen_filter_th, 0x4);
+ write32(&base->m_aud_gen_filter_th, 0x2);
- writel(0x00000101, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, 0x00000101);
/* Set Analog Parameters */
- writel(0x10, &base->analog_ctl_1);
- writel(0x0C, &base->analog_ctl_2);
- writel(0x85, &base->analog_ctl_3);
- writel(0x66, &base->pll_filter_ctl_1);
- writel(0x0, &base->tx_amp_tuning_ctl);
+ write32(&base->analog_ctl_1, 0x10);
+ write32(&base->analog_ctl_2, 0x0C);
+ write32(&base->analog_ctl_3, 0x85);
+ write32(&base->pll_filter_ctl_1, 0x66);
+ write32(&base->tx_amp_tuning_ctl, 0x0);
/* Set interrupt pin assertion polarity as high */
- writel(INT_POL0 | INT_POL1, &base->int_ctl);
+ write32(&base->int_ctl, INT_POL0 | INT_POL1);
/* Clear pending registers */
- writel(0xff, &base->common_int_sta_1);
- writel(0x4f, &base->common_int_sta_2);
- writel(0xe0, &base->common_int_sta_3);
- writel(0xe7, &base->common_int_sta_4);
- writel(0x63, &base->dp_int_sta);
+ write32(&base->common_int_sta_1, 0xff);
+ write32(&base->common_int_sta_2, 0x4f);
+ write32(&base->common_int_sta_3, 0xe0);
+ write32(&base->common_int_sta_4, 0xe7);
+ write32(&base->dp_int_sta, 0x63);
/* 0:mask,1: unmask */
- writel(0x00, &base->common_int_mask_1);
- writel(0x00, &base->common_int_mask_2);
- writel(0x00, &base->common_int_mask_3);
- writel(0x00, &base->common_int_mask_4);
- writel(0x00, &base->int_sta_mask);
+ write32(&base->common_int_mask_1, 0x00);
+ write32(&base->common_int_mask_2, 0x00);
+ write32(&base->common_int_mask_3, 0x00);
+ write32(&base->common_int_mask_4, 0x00);
+ write32(&base->int_sta_mask, 0x00);
}
unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp)
{
u32 reg;
- reg = readl(&dp->base->dp_debug_ctl);
+ reg = read32(&dp->base->dp_debug_ctl);
if (reg & PLL_LOCK)
return PLL_LOCKED;
else
@@ -123,10 +123,10 @@ int s5p_dp_init_analog_func(struct s5p_dp_device *dp)
struct stopwatch sw;
struct exynos5_dp *base = dp->base;
- writel(0x00, &base->dp_phy_pd);
+ write32(&base->dp_phy_pd, 0x00);
reg = PLL_LOCK_CHG;
- writel(reg, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg);
clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL));
@@ -159,7 +159,7 @@ void s5p_dp_init_aux(struct s5p_dp_device *dp)
/* Clear interrupts related to AUX channel */
reg = RPLY_RECEIV | AUX_ERR;
- writel(reg, &base->dp_int_sta);
+ write32(&base->dp_int_sta, reg);
/* Disable AUX channel module */
setbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
@@ -168,12 +168,12 @@ void s5p_dp_init_aux(struct s5p_dp_device *dp)
reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT;
reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT;
reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT);
- writel(reg, &base->aux_hw_retry_ctl) ;
+ write32(&base->aux_hw_retry_ctl, reg);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
reg = DEFER_CTRL_EN;
reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT;
- writel(reg, &base->aux_ch_defer_dtl);
+ write32(&base->aux_ch_defer_dtl, reg);
/* Enable AUX channel module */
clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
@@ -188,24 +188,24 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
setbits_le32(&base->aux_ch_ctl_2, AUX_EN);
/* Is AUX CH command reply received? */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
while (!(reg & RPLY_RECEIV))
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
/* Clear interrupt source for AUX CH command reply */
- writel(RPLY_RECEIV, &base->dp_int_sta);
+ write32(&base->dp_int_sta, RPLY_RECEIV);
/* Clear interrupt source for AUX CH access error */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
if (reg & AUX_ERR) {
printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: "
"0x%02x\n", __func__, reg);
- writel(AUX_ERR, &base->dp_int_sta);
+ write32(&base->dp_int_sta, AUX_ERR);
return -1;
}
/* Check AUX CH error access status */
- reg = readl(&base->dp_int_sta);
+ reg = read32(&base->dp_int_sta);
if ((reg & AUX_STATUS_MASK) != 0) {
printk(BIOS_ERR, "AUX CH error happens: %d\n\n",
reg & AUX_STATUS_MASK);
@@ -226,22 +226,22 @@ int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
/* Clear AUX CH data buffer */
- writel(BUF_CLR, &base->buf_data_ctl);
+ write32(&base->buf_data_ctl, BUF_CLR);
/* Select DPCD device address */
reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
reg &= AUX_ADDR_7_0_MASK;
- writel(reg, &base->aux_addr_7_0);
+ write32(&base->aux_addr_7_0, reg);
reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
reg &= AUX_ADDR_15_8_MASK;
- writel(reg, &base->aux_addr_15_8);
+ write32(&base->aux_addr_15_8, reg);
reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
reg &= AUX_ADDR_19_16_MASK;
- writel(reg, &base->aux_addr_19_16);
+ write32(&base->aux_addr_19_16, reg);
/* Write data buffer */
reg = (unsigned int)data;
- writel(reg, &base->buf_data_0);
+ write32(&base->buf_data_0, reg);
/*
* Set DisplayPort transaction and write 1 byte
@@ -249,7 +249,7 @@ int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
* If Bit 3 is 0, I2C transaction.
*/
reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
- writel(reg, &base->aux_ch_ctl_1);
+ write32(&base->aux_ch_ctl_1, reg);
/* Start AUX transaction */
retval = s5p_dp_start_aux_transaction(dp);
@@ -273,18 +273,18 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
/* Clear AUX CH data buffer */
- writel(BUF_CLR, &base->buf_data_ctl);
+ write32(&base->buf_data_ctl, BUF_CLR);
/* Select DPCD device address */
reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
reg &= AUX_ADDR_7_0_MASK;
- writel(reg, &base->aux_addr_7_0);
+ write32(&base->aux_addr_7_0, reg);
reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
reg &= AUX_ADDR_15_8_MASK;
- writel(reg, &base->aux_addr_15_8);
+ write32(&base->aux_addr_15_8, reg);
reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
reg &= AUX_ADDR_19_16_MASK;
- writel(reg, &base->aux_addr_19_16);
+ write32(&base->aux_addr_19_16, reg);
/*
* Set DisplayPort transaction and read 1 byte
@@ -292,7 +292,7 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
* If Bit 3 is 0, I2C transaction.
*/
reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, &base->aux_ch_ctl_1);
+ write32(&base->aux_ch_ctl_1, reg);
/* Start AUX transaction */
retval = s5p_dp_start_aux_transaction(dp);
@@ -304,7 +304,7 @@ int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
/* Read data buffer */
if (!retval) {
- reg = readl(&base->buf_data_0);
+ reg = read32(&base->buf_data_0);
*data = (unsigned char)(reg & 0xff);
}
@@ -317,17 +317,17 @@ void s5p_dp_init_video(struct s5p_dp_device *dp)
struct exynos5_dp *base = dp->base;
reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
- writel(reg, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg);
reg = 0x0;
- writel(reg, &base->sys_ctl_1);
+ write32(&base->sys_ctl_1, reg);
reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT;
reg |= CHA_CTRL;
- writel(reg, &base->sys_ctl_2);
+ write32(&base->sys_ctl_2, reg);
reg = 0x0;
- writel(reg, &base->sys_ctl_3);
+ write32(&base->sys_ctl_3, reg);
}
void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
@@ -343,16 +343,16 @@ void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
reg = (dynamic_range << IN_D_RANGE_SHIFT) |
(color_depth << IN_BPC_SHIFT) |
(color_space << IN_COLOR_F_SHIFT);
- writel(reg, &base->video_ctl_2);
+ write32(&base->video_ctl_2, reg);
/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
- reg = readl(&base->video_ctl_3);
+ reg = read32(&base->video_ctl_3);
reg &= ~IN_YC_COEFFI_MASK;
if (coeff)
reg |= IN_YC_COEFFI_ITU709;
else
reg |= IN_YC_COEFFI_ITU601;
- writel(reg, &base->video_ctl_3);
+ write32(&base->video_ctl_3, reg);
}
int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
@@ -360,18 +360,18 @@ int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->sys_ctl_1);
- writel(reg, &base->sys_ctl_1);
+ reg = read32(&base->sys_ctl_1);
+ write32(&base->sys_ctl_1, reg);
- reg = readl(&base->sys_ctl_1);
+ reg = read32(&base->sys_ctl_1);
if (!(reg & DET_STA))
return -1;
- reg = readl(&base->sys_ctl_2);
- writel(reg, &base->sys_ctl_2);
+ reg = read32(&base->sys_ctl_2);
+ write32(&base->sys_ctl_2, reg);
- reg = readl(&base->sys_ctl_2);
+ reg = read32(&base->sys_ctl_2);
if (reg & CHA_STA) {
printk(BIOS_DEBUG, "Input stream clk is changing\n");
@@ -393,28 +393,28 @@ void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp,
setbits_le32(&base->sys_ctl_4, FIX_M_VID);
reg = m_value >> M_VID_0_VALUE_SHIFT;
- writel(reg, &base->m_vid_0);
+ write32(&base->m_vid_0, reg);
reg = (m_value >> M_VID_1_VALUE_SHIFT);
- writel(reg, &base->m_vid_1);
+ write32(&base->m_vid_1, reg);
reg = (m_value >> M_VID_2_VALUE_SHIFT);
- writel(reg, &base->m_vid_2);
+ write32(&base->m_vid_2, reg);
reg = n_value >> N_VID_0_VALUE_SHIFT;
- writel(reg, &base->n_vid_0);
+ write32(&base->n_vid_0, reg);
reg = (n_value >> N_VID_1_VALUE_SHIFT);
- writel(reg, &base->n_vid_1);
+ write32(&base->n_vid_1, reg);
reg = (n_value >> N_VID_2_VALUE_SHIFT);
- writel(reg, &base->n_vid_2);
+ write32(&base->n_vid_2, reg);
} else {
clrbits_le32(&base->sys_ctl_4, FIX_M_VID);
- writel(0x00, &base->n_vid_0);
- writel(0x80, &base->n_vid_1);
- writel(0x00, &base->n_vid_2);
+ write32(&base->n_vid_0, 0x00);
+ write32(&base->n_vid_1, 0x80);
+ write32(&base->n_vid_2, 0x00);
}
}
@@ -423,10 +423,10 @@ void s5p_dp_enable_video_master(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->soc_general_ctl);
+ reg = read32(&base->soc_general_ctl);
reg &= ~VIDEO_MODE_MASK;
reg |= VIDEO_MODE_SLAVE_MODE;
- writel(reg, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, reg);
}
int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
@@ -439,10 +439,10 @@ int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
stopwatch_init_msecs_expire(&sw, STREAM_ON_TIMEOUT);
do {
- reg = readl(&base->common_int_sta_1);
+ reg = read32(&base->common_int_sta_1);
if (reg & VSYNC_DET) {
i++;
- writel(reg | VSYNC_DET, &base->common_int_sta_1);
+ write32(&base->common_int_sta_1, reg | VSYNC_DET);
}
if (i == 4)
break;
@@ -462,28 +462,28 @@ void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp,
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->func_en_1);
+ reg = read32(&base->func_en_1);
reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
reg |= MASTER_VID_FUNC_EN_N;
- writel(reg, &base->func_en_1);
+ write32(&base->func_en_1, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~INTERACE_SCAN_CFG;
reg |= (video_info->interlaced << 2);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~VSYNC_POLARITY_CFG;
reg |= (video_info->v_sync_polarity << 1);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
- reg = readl(&base->video_ctl_10);
+ reg = read32(&base->video_ctl_10);
reg &= ~HSYNC_POLARITY_CFG;
reg |= (video_info->h_sync_polarity << 0);
- writel(reg, &base->video_ctl_10);
+ write32(&base->video_ctl_10, reg);
reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
- writel(reg, &base->soc_general_ctl);
+ write32(&base->soc_general_ctl, reg);
}
void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp)
@@ -491,7 +491,7 @@ void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp)
u32 reg;
struct exynos5_dp *base = dp->base;
- reg = readl(&base->dp_hw_link_training);
+ reg = read32(&base->dp_hw_link_training);
while (reg & HW_TRAINING_EN)
- reg = readl(&base->dp_hw_link_training);
+ reg = read32(&base->dp_hw_link_training);
}
diff --git a/src/soc/samsung/exynos5250/fb.c b/src/soc/samsung/exynos5250/fb.c
index 3c7c5ef27b..befb0debf0 100644
--- a/src/soc/samsung/exynos5250/fb.c
+++ b/src/soc/samsung/exynos5250/fb.c
@@ -122,48 +122,48 @@ void fb_init(unsigned long int fb_size, void *lcdbase,
fb_size = ALIGN(fb_size, 4096);
- writel(pd->ivclk | pd->fixvclk, &exynos_disp_ctrl->vidcon1);
+ write32(&exynos_disp_ctrl->vidcon1, pd->ivclk | pd->fixvclk);
val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET);
- writel(val, &exynos_fimd->vidcon0);
+ write32(&exynos_fimd->vidcon0, val);
val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) |
(pd->lower_margin << V_FRONT_PORCH_OFFSET) |
(pd->upper_margin << V_BACK_PORCH_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon0);
+ write32(&exynos_disp_ctrl->vidtcon0, val);
val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) |
(pd->right_margin << H_FRONT_PORCH_OFFSET) |
(pd->left_margin << H_BACK_PORCH_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon1);
+ write32(&exynos_disp_ctrl->vidtcon1, val);
val = ((pd->xres - 1) << HOZVAL_OFFSET) |
((pd->yres - 1) << LINEVAL_OFFSET);
- writel(val, &exynos_disp_ctrl->vidtcon2);
+ write32(&exynos_disp_ctrl->vidtcon2, val);
- writel((unsigned int)lcdbase, &exynos_fimd->vidw00add0b0);
- writel((unsigned int)lcdbase + fb_size, &exynos_fimd->vidw00add1b0);
+ write32(&exynos_fimd->vidw00add0b0, (unsigned int)lcdbase);
+ write32(&exynos_fimd->vidw00add1b0, (unsigned int)lcdbase + fb_size);
- writel(pd->xres * 2, &exynos_fimd->vidw00add2);
+ write32(&exynos_fimd->vidw00add2, pd->xres * 2);
val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET);
val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET);
- writel(val, &exynos_fimd->vidosd0b);
- writel(pd->xres * pd->yres, &exynos_fimd->vidosd0c);
+ write32(&exynos_fimd->vidosd0b, val);
+ write32(&exynos_fimd->vidosd0c, pd->xres * pd->yres);
setbits_le32(&exynos_fimd->shadowcon, CHANNEL0_EN);
val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET;
val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN;
- writel(val, &exynos_fimd->wincon0);
+ write32(&exynos_fimd->wincon0, val);
/* DPCLKCON_ENABLE */
- writel(1 << 1, &exynos_fimd->dpclkcon);
+ write32(&exynos_fimd->dpclkcon, 1 << 1);
}
#ifdef UNUSED_CODE
void exynos_fimd_disable(void)
{
- writel(0, &exynos_fimd->wincon0);
+ write32(&exynos_fimd->wincon0, 0);
clrbits_le32(&exynos_fimd->shadowcon, CHANNEL0_EN);
}
#endif
@@ -328,18 +328,18 @@ static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp,
reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT;
switch (lane) {
case 0:
- writel(reg, &base->ln0_link_trn_ctl);
+ write32(&base->ln0_link_trn_ctl, reg);
break;
case 1:
- writel(reg, &base->ln1_link_trn_ctl);
+ write32(&base->ln1_link_trn_ctl, reg);
break;
case 2:
- writel(reg, &base->ln2_link_trn_ctl);
+ write32(&base->ln2_link_trn_ctl, reg);
break;
case 3:
- writel(reg, &base->ln3_link_trn_ctl);
+ write32(&base->ln3_link_trn_ctl, reg);
break;
default:
printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane);
@@ -432,7 +432,7 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
}
/* All DP analog module power up */
- writel(0x00, &base->dp_phy_pd);
+ write32(&base->dp_phy_pd, 0x00);
/* Initialize by reading RX's DPCD */
s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
@@ -463,21 +463,21 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
dp->link_train.link_rate = max_rate;
/* Set link rate and count as you want to establish*/
- writel(dp->link_train.lane_count, &base->lane_count_set);
- writel(dp->link_train.link_rate, &base->link_bw_set);
+ write32(&base->lane_count_set, dp->link_train.lane_count);
+ write32(&base->link_bw_set, dp->link_train.link_rate);
/* Set sink to D0 (Sink Not Ready) mode. */
s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
DPCD_SET_POWER_STATE_D0);
/* Start HW link training */
- writel(HW_TRAINING_EN, &base->dp_hw_link_training);
+ write32(&base->dp_hw_link_training, HW_TRAINING_EN);
/* Wait until HW link training done */
s5p_dp_wait_hw_link_training_done(dp);
/* Get hardware link training status */
- data = readl(&base->dp_hw_link_training);
+ data = read32(&base->dp_hw_link_training);
printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data);
if (data != 0) {
printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data);
@@ -485,11 +485,11 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
}
/* Get Link Bandwidth */
- data = readl(&base->link_bw_set);
+ data = read32(&base->link_bw_set);
dp->link_train.link_rate = data;
- data = readl(&base->lane_count_set);
+ data = read32(&base->lane_count_set);
dp->link_train.lane_count = data;
printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n",
dp->link_train.link_rate, data);
@@ -541,8 +541,8 @@ int dp_controller_init(struct s5p_dp_device *dp_device)
/* Enable enhanced mode */
setbits_le32(&base->sys_ctl_4, ENHANCED);
- writel(dp->link_train.lane_count, &base->lane_count_set);
- writel(dp->link_train.link_rate, &base->link_bw_set);
+ write32(&base->lane_count_set, dp->link_train.lane_count);
+ write32(&base->link_bw_set, dp->link_train.link_rate);
s5p_dp_init_video(dp);
ret = s5p_dp_config_video(dp, dp->video_info);
diff --git a/src/soc/samsung/exynos5250/gpio.c b/src/soc/samsung/exynos5250/gpio.c
index 203aa03a42..c7a84197d0 100644
--- a/src/soc/samsung/exynos5250/gpio.c
+++ b/src/soc/samsung/exynos5250/gpio.c
@@ -82,10 +82,10 @@ void gpio_cfg_pin(int gpio, int cfg)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->con);
+ value = read32(&bank->con);
value &= ~CON_MASK(GPIO_BIT(gpio));
value |= CON_SFR(GPIO_BIT(gpio), cfg);
- writel(value, &bank->con);
+ write32(&bank->con, value);
}
static int gpio_get_cfg(int gpio)
@@ -93,7 +93,7 @@ static int gpio_get_cfg(int gpio)
struct gpio_bank *bank = gpio_get_bank(gpio);
int shift = GPIO_BIT(gpio) << 2;
- return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
+ return (read32(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
}
void gpio_set_pull(int gpio, int mode)
@@ -101,7 +101,7 @@ void gpio_set_pull(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->pull);
+ value = read32(&bank->pull);
value &= ~PULL_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -113,7 +113,7 @@ void gpio_set_pull(int gpio, int mode)
break;
}
- writel(value, &bank->pull);
+ write32(&bank->pull, value);
}
void gpio_set_drv(int gpio, int mode)
@@ -121,7 +121,7 @@ void gpio_set_drv(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~DRV_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -135,7 +135,7 @@ void gpio_set_drv(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
void gpio_set_rate(int gpio, int mode)
@@ -143,7 +143,7 @@ void gpio_set_rate(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~RATE_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -155,7 +155,7 @@ void gpio_set_rate(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
int gpio_direction_input(unsigned gpio)
@@ -170,11 +170,11 @@ int gpio_direction_output(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
gpio_cfg_pin(gpio, GPIO_OUTPUT);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->dat);
+ value = read32(&bank->dat);
return !!(value & DAT_MASK(GPIO_BIT(gpio)));
}
@@ -195,11 +195,11 @@ int gpio_set_value(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
return 0;
}
diff --git a/src/soc/samsung/exynos5250/i2c.c b/src/soc/samsung/exynos5250/i2c.c
index f92182a77a..e9eed406e5 100644
--- a/src/soc/samsung/exynos5250/i2c.c
+++ b/src/soc/samsung/exynos5250/i2c.c
@@ -117,34 +117,34 @@ static struct s3c24x0_i2c_bus i2c_busses[] = {
static int i2c_int_pending(struct i2c_regs *regs)
{
- return readb(&regs->con) & I2cConIntPending;
+ return read8(&regs->con) & I2cConIntPending;
}
static void i2c_clear_int(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConIntPending, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConIntPending);
}
static void i2c_ack_enable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) | I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) | I2cConAckGen);
}
static void i2c_ack_disable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConAckGen);
}
static int i2c_got_ack(struct i2c_regs *regs)
{
- return !(readb(&regs->stat) & I2cStatAck);
+ return !(read8(&regs->stat) & I2cStatAck);
}
static int i2c_wait_for_idle(struct i2c_regs *regs)
{
int timeout = 1000 * 100; // 1s.
while (timeout--) {
- if (!(readb(&regs->stat) & I2cStatBusy))
+ if (!(read8(&regs->stat) & I2cStatBusy))
return 0;
udelay(10);
}
@@ -169,17 +169,17 @@ static int i2c_wait_for_int(struct i2c_regs *regs)
static int i2c_send_stop(struct i2c_regs *regs)
{
- uint8_t mode = readb(&regs->stat) & (I2cStatModeMask);
- writeb(mode | I2cStatEnable, &regs->stat);
+ uint8_t mode = read8(&regs->stat) & (I2cStatModeMask);
+ write8(&regs->stat, mode | I2cStatEnable);
i2c_clear_int(regs);
return i2c_wait_for_idle(regs);
}
static int i2c_send_start(struct i2c_regs *regs, int read, int chip)
{
- writeb(chip << 1, &regs->ds);
+ write8(&regs->ds, chip << 1);
uint8_t mode = read ? I2cStatMasterRecv : I2cStatMasterXmit;
- writeb(mode | I2cStatStartStop | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, mode | I2cStatStartStop | I2cStatEnable);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -201,7 +201,7 @@ static int i2c_xmit_buf(struct i2c_regs *regs, uint8_t *data, int len)
int i;
for (i = 0; i < len; i++) {
- writeb(data[i], &regs->ds);
+ write8(&regs->ds, data[i]);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -231,7 +231,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
if (i2c_wait_for_int(regs))
return 1;
- data[i] = readb(&regs->ds);
+ data[i] = read8(&regs->ds);
}
return 0;
@@ -246,7 +246,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int seg_count)
if (!regs || i2c_wait_for_idle(regs))
return 1;
- writeb(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
int i;
for (i = 0; i < seg_count; i++) {
@@ -286,11 +286,11 @@ void i2c_init(unsigned bus, int speed, int slaveadd)
// Set prescaler, divisor according to freq, also set ACKGEN, IRQ.
val = (div & 0x0f) | 0xa0 | ((pres == 512) ? 0x40 : 0);
- writel(val, &i2c->regs->con);
+ write32(&i2c->regs->con, val);
// Init to SLAVE RECEIVE mode and clear I2CADDn.
- writel(0, &i2c->regs->stat);
- writel(slaveadd, &i2c->regs->add);
+ write32(&i2c->regs->stat, 0);
+ write32(&i2c->regs->add, slaveadd);
// program Master Transmit (and implicit STOP).
- writel(I2cStatMasterXmit | I2cStatEnable, &i2c->regs->stat);
+ write32(&i2c->regs->stat, I2cStatMasterXmit | I2cStatEnable);
}
diff --git a/src/soc/samsung/exynos5250/power.c b/src/soc/samsung/exynos5250/power.c
index c7d491dd23..1b8aaa67d1 100644
--- a/src/soc/samsung/exynos5250/power.c
+++ b/src/soc/samsung/exynos5250/power.c
@@ -89,5 +89,5 @@ void power_enable_xclkout(void)
void power_release_uart_retention(void)
{
- writel(1 << 28, &exynos_power->padret_uart_opt);
+ write32(&exynos_power->padret_uart_opt, 1 << 28);
}
diff --git a/src/soc/samsung/exynos5250/spi.c b/src/soc/samsung/exynos5250/spi.c
index 33a8c740f7..fed3aa7518 100644
--- a/src/soc/samsung/exynos5250/spi.c
+++ b/src/soc/samsung/exynos5250/spi.c
@@ -46,25 +46,25 @@ static void exynos_spi_rx_tx(struct exynos_spi *regs, int todo,
out_bytes = in_bytes = todo;
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
- writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, ((todo * 8) / 32) | SPI_PACKET_CNT_EN);
while (in_bytes) {
uint32_t spi_sts;
int temp;
- spi_sts = readl(&regs->spi_sts);
+ spi_sts = read32(&regs->spi_sts);
rx_lvl = ((spi_sts >> 15) & 0x7f);
tx_lvl = ((spi_sts >> 6) & 0x7f);
while (tx_lvl < 32 && out_bytes) {
// TODO The "writing" (tx) is not supported now; that's
// why we write garbage to keep driving FIFO clock.
temp = 0xffffffff;
- writel(temp, &regs->tx_data);
+ write32(&regs->tx_data, temp);
out_bytes -= 4;
tx_lvl += 4;
}
while (rx_lvl >= 4 && in_bytes) {
- temp = readl(&regs->rx_data);
+ temp = read32(&regs->rx_data);
if (rxp)
*rxp++ = temp;
in_bytes -= 4;
@@ -79,9 +79,9 @@ int exynos_spi_open(struct exynos_spi *regs)
/* set the spi1 GPIO */
/* set pktcnt and enable it */
- writel(4 | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, 4 | SPI_PACKET_CNT_EN);
/* set FB_CLK_SEL */
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ write32(&regs->fb_clk, SPI_FB_DELAY_180);
/* set CH_WIDTH and BUS_WIDTH as word */
setbits_le32(&regs->mode_cfg,
SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
@@ -109,10 +109,10 @@ int exynos_spi_read(struct exynos_spi *regs, void *dest, u32 len, u32 off)
clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
/* Send read instruction (0x3h) followed by a 24 bit addr */
- writel((SF_READ_DATA_CMD << 24) | off, &regs->tx_data);
+ write32(&regs->tx_data, (SF_READ_DATA_CMD << 24) | off);
/* waiting for TX done */
- while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE));
+ while (!(read32(&regs->spi_sts) & SPI_ST_TX_DONE));
for (upto = 0, i = 0; upto < len; upto += todo, i++) {
todo = MIN(len - upto, (1 << 15));
@@ -132,7 +132,7 @@ int exynos_spi_close(struct exynos_spi *regs)
*/
clrbits_le32(&regs->mode_cfg,
SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
- writel(0, &regs->swap_cfg);
+ write32(&regs->swap_cfg, 0);
/*
* Flush spi tx, rx fifos and reset the SPI controller
diff --git a/src/soc/samsung/exynos5250/timer.c b/src/soc/samsung/exynos5250/timer.c
index 1e25771dbd..2abaf3bc5d 100644
--- a/src/soc/samsung/exynos5250/timer.c
+++ b/src/soc/samsung/exynos5250/timer.c
@@ -27,16 +27,15 @@ static const uint32_t clocks_per_usec = MCT_HZ/1000000;
static uint64_t mct_raw_value(void)
{
- uint64_t upper = readl(&exynos_mct->g_cnt_u);
- uint64_t lower = readl(&exynos_mct->g_cnt_l);
+ uint64_t upper = read32(&exynos_mct->g_cnt_u);
+ uint64_t lower = read32(&exynos_mct->g_cnt_l);
return (upper << 32) | lower;
}
void init_timer(void)
{
- writel(readl(&exynos_mct->g_tcon) | (0x1 << 8),
- &exynos_mct->g_tcon);
+ write32(&exynos_mct->g_tcon, read32(&exynos_mct->g_tcon) | (0x1 << 8));
}
void timer_monotonic_get(struct mono_time *mt)
diff --git a/src/soc/samsung/exynos5250/tmu.c b/src/soc/samsung/exynos5250/tmu.c
index bde11a2550..51e7ad8894 100644
--- a/src/soc/samsung/exynos5250/tmu.c
+++ b/src/soc/samsung/exynos5250/tmu.c
@@ -80,7 +80,7 @@ static int get_cur_temp(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Temperature code range between min 25 and max 125 */
- cur_temp = readl(&reg->current_temp) & 0xff;
+ cur_temp = read32(&reg->current_temp) & 0xff;
/* Calibrate current temperature */
if (cur_temp)
@@ -142,10 +142,10 @@ static void tmu_setup_parameters(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Must reload for using efuse value at EXYNOS */
- writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+ write32(&reg->triminfo_control, TRIMINFO_RELOAD);
/* Get the compensation parameter */
- te_temp = readl(&reg->triminfo);
+ te_temp = read32(&reg->triminfo);
info->te1 = te_temp & TRIM_INFO_MASK;
info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
@@ -169,8 +169,8 @@ static void tmu_setup_parameters(struct tmu_info *info)
(hwtrip_code << 24));
/* Set interrupt level */
- writel(rising_value, &reg->threshold_temp_rise);
- writel(cooling_temp, &reg->threshold_temp_fall);
+ write32(&reg->threshold_temp_rise, rising_value);
+ write32(&reg->threshold_temp_fall, cooling_temp);
/*
* Need to init all register settings after getting parameter info
@@ -183,20 +183,20 @@ static void tmu_setup_parameters(struct tmu_info *info)
* TODO(bhthompson): rewrite this code such that we are not performing
* a hard wipe of tmu_control and re verify functionality.
*/
- writel(data->slope, &reg->tmu_control);
+ write32(&reg->tmu_control, data->slope);
- writel(INTCLEARALL, &reg->intclear);
+ write32(&reg->intclear, INTCLEARALL);
/* TMU core enable */
- con = readl(&reg->tmu_control);
+ con = read32(&reg->tmu_control);
con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
- writel(con, &reg->tmu_control);
+ write32(&reg->tmu_control, con);
/* Enable HW thermal trip */
power_enable_hw_thermal_trip();
/* LEV1 LEV2 interrupt enable */
- writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+ write32(&reg->inten, INTEN_RISE1 | INTEN_RISE2);
}
/*
diff --git a/src/soc/samsung/exynos5250/trustzone.c b/src/soc/samsung/exynos5250/trustzone.c
index c4d3bc64b6..4a8141eeaf 100644
--- a/src/soc/samsung/exynos5250/trustzone.c
+++ b/src/soc/samsung/exynos5250/trustzone.c
@@ -31,14 +31,14 @@ void trustzone_init(void)
tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
+ write32(&tzpc->r0size, R0SIZE);
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
+ write32(&tzpc->decprot0set, DECPROTXSET);
+ write32(&tzpc->decprot1set, DECPROTXSET);
if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
+ write32(&tzpc->decprot2set, DECPROTXSET);
+ write32(&tzpc->decprot3set, DECPROTXSET);
}
}
}
diff --git a/src/soc/samsung/exynos5250/uart.c b/src/soc/samsung/exynos5250/uart.c
index c23cfed347..81386b7ec4 100644
--- a/src/soc/samsung/exynos5250/uart.c
+++ b/src/soc/samsung/exynos5250/uart.c
@@ -66,7 +66,7 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
- writel(val / 16 - 1, &uart->ubrdiv);
+ write32(&uart->ubrdiv, val / 16 - 1);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
@@ -91,12 +91,12 @@ static void exynos5_init_dev(struct s5p_uart *uart)
exynos_pinmux_uart3();
/* enable FIFOs */
- writel(0x1, &uart->ufcon);
- writel(0, &uart->umcon);
+ write32(&uart->ufcon, 0x1);
+ write32(&uart->umcon, 0);
/* 8N1 */
- writel(0x3, &uart->ulcon);
+ write32(&uart->ulcon, 0x3);
/* No interrupts, no DMA, pure polling */
- writel(0x245, &uart->ucon);
+ write32(&uart->ucon, 0x245);
serial_setbrg_dev(uart);
}
@@ -117,7 +117,7 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
else
mask = 0xf;
- return readl(&uart->uerstat) & mask;
+ return read32(&uart->uerstat) & mask;
}
/*
@@ -128,13 +128,13 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
- while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ while (!(read32(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
- return readb(&uart->urxh) & 0xff;
+ return read8(&uart->urxh) & 0xff;
}
/*
@@ -143,17 +143,17 @@ static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
- while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
+ while ((read32(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
- writeb(data, &uart->utxh);
+ write8(&uart->utxh, data);
}
static void exynos5_uart_tx_flush(struct s5p_uart *uart)
{
- while (readl(&uart->ufstat) & 0x1ff0000);
+ while (read32(&uart->ufstat) & 0x1ff0000);
}
uintptr_t uart_platform_base(int idx)
diff --git a/src/soc/samsung/exynos5250/usb.c b/src/soc/samsung/exynos5250/usb.c
index 8a91497e1f..3f6833657b 100644
--- a/src/soc/samsung/exynos5250/usb.c
+++ b/src/soc/samsung/exynos5250/usb.c
@@ -51,23 +51,13 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
- writel(0x1 << 24 | /* activate PHY low power states */
- 0x4 << 19 | /* low power delay value */
- 0x1 << 18 | /* activate PHY low power delay */
- 0x1 << 17 | /* enable SuperSpeed PHY suspend */
- 0x1 << 1 | /* default Tx deemphasis value */
- 0, &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- writel(0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
- 0x1 << 8 | /* enable PHY sleep in L1 */
- 0x1 << 6 | /* enable PHY suspend */
- 0, &dwc3->usb2phycfg);
-
- writel(0x5dc << 19 | /* suspend clock scale for 24MHz */
- 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
- 0x1 << 12 | /* port capability HOST */
- 0, &dwc3->ctl);
+ write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+
+ write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
}
void setup_usb_drd_dwc3()
@@ -84,44 +74,25 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
setbits_le32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
- writel(1 << 6, &phy->utmi);
-
- writel(0x88 << 23 | /* spread spectrum refclk selector */
- 0x1 << 20 | /* enable spread spectrum */
- 0x1 << 19 | /* enable prescaler refclk */
- 0x68 << 11 | /* multiplier for 24MHz refclk */
- 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
- 0x1 << 4 | /* power supply in normal operating mode */
- 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
- 0x1 << 1 | /* force port reset */
- 0x1 << 0 | /* normal operating mode */
- 0, &phy->clkrst);
-
- writel(0x9 << 26 | /* LOS level */
- 0x3 << 22 | /* TX VREF tune */
- 0x1 << 20 | /* TX rise tune */
- 0x1 << 18 | /* TX res tune */
- 0x3 << 13 | /* TX HS X Vtune */
- 0x3 << 9 | /* TX FS/LS tune */
- 0x3 << 6 | /* SQRX tune */
- 0x4 << 3 | /* OTG tune */
- 0x4 << 0 | /* comp disc tune */
- 0, &phy->param0);
-
- writel(0x7f << 19 | /* reserved */
- 0x7f << 12 | /* Tx launch amplitude */
- 0x20 << 6 | /* Tx deemphasis 6dB */
- 0x1c << 0 | /* Tx deemphasis 3.5dB (value from U-Boot) */
- 0, &phy->param1);
+ write32(&phy->utmi, 1 << 6);
+
+ write32(&phy->clkrst,
+ 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+
+ write32(&phy->param0,
+ 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+
+ write32(&phy->param1,
+ 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
/* disable all test features */
- writel(0, &phy->test);
+ write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
- writel(0x1 << 2, &phy->utmiclksel);
+ write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
- writel(0x0, &phy->resume);
+ write32(&phy->resume, 0x0);
udelay(10);
clrbits_le32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
@@ -144,7 +115,7 @@ void setup_usb_host_phy(int hsic_gpio)
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
- hostphy_ctrl0 = readl(&exynos_usb_host_phy->usbphyctrl0);
+ hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
@@ -158,7 +129,7 @@ void setup_usb_host_phy(int hsic_gpio)
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &exynos_usb_host_phy->usbphyctrl0);
+ write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits_le32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
diff --git a/src/soc/samsung/exynos5420/clock.c b/src/soc/samsung/exynos5420/clock.c
index f6c7845c54..971364ddfe 100644
--- a/src/soc/samsung/exynos5420/clock.c
+++ b/src/soc/samsung/exynos5420/clock.c
@@ -47,34 +47,34 @@ unsigned long get_pll_clk(int pllreg)
switch (pllreg) {
case APLL:
- r = readl(&exynos_clock->apll_con0);
+ r = read32(&exynos_clock->apll_con0);
break;
case MPLL:
- r = readl(&exynos_clock->mpll_con0);
+ r = read32(&exynos_clock->mpll_con0);
break;
case EPLL:
- r = readl(&exynos_clock->epll_con0);
- k = readl(&exynos_clock->epll_con1);
+ r = read32(&exynos_clock->epll_con0);
+ k = read32(&exynos_clock->epll_con1);
break;
case VPLL:
- r = readl(&exynos_clock->vpll_con0);
- k = readl(&exynos_clock->vpll_con1);
+ r = read32(&exynos_clock->vpll_con0);
+ k = read32(&exynos_clock->vpll_con1);
break;
case BPLL:
- r = readl(&exynos_clock->bpll_con0);
+ r = read32(&exynos_clock->bpll_con0);
break;
case RPLL:
- r = readl(&exynos_clock->rpll_con0);
- k = readl(&exynos_clock->rpll_con1);
+ r = read32(&exynos_clock->rpll_con0);
+ k = read32(&exynos_clock->rpll_con1);
break;
case SPLL:
- r = readl(&exynos_clock->spll_con0);
+ r = read32(&exynos_clock->spll_con0);
break;
case CPLL:
- r = readl(&exynos_clock->cpll_con0);
+ r = read32(&exynos_clock->cpll_con0);
break;
case DPLL:
- r = readl(&exynos_clock->dpll_con0);
+ r = read32(&exynos_clock->dpll_con0);
break;
default:
printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
@@ -169,48 +169,48 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
switch (peripheral) {
case PERIPH_ID_UART0:
- src = (readl(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
break;
case PERIPH_ID_UART1:
- src = (readl(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
break;
case PERIPH_ID_UART2:
- src = (readl(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
break;
case PERIPH_ID_UART3:
- src = (readl(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
break;
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
- src = (readl(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
break;
case PERIPH_ID_SPI0:
- src = (readl(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
break;
case PERIPH_ID_SPI1:
- src = (readl(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
break;
case PERIPH_ID_SPI2:
- src = (readl(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
break;
case PERIPH_ID_SPI3: /* aka SPI0_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
break;
case PERIPH_ID_SPI4: /* aka SPI1_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -229,7 +229,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
* TODO: Add a helper function like with the peripheral clock
* select fields?
*/
- src = (readl(&exynos_clock->clk_src_top1) >> 8) & 0x3;
+ src = (read32(&exynos_clock->clk_src_top1) >> 8) & 0x3;
if (src == 0x0)
src = CPLL;
else if (src == 0x1)
@@ -240,7 +240,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
return -1;
sclk = get_pll_clk(src);
- div = ((readl(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
+ div = ((read32(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
return sclk / div;
default:
printk(BIOS_DEBUG, "%s: invalid peripheral %d",
@@ -267,7 +267,7 @@ unsigned long get_arm_clk(void)
unsigned int arm_ratio;
unsigned int arm2_ratio;
- div = readl(&exynos_clock->clk_div_cpu0);
+ div = read32(&exynos_clock->clk_div_cpu0);
/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
arm_ratio = (div >> 0) & 0x7;
@@ -286,7 +286,7 @@ static unsigned long get_mmc_clk(int dev_index)
unsigned int sel, ratio;
int shift = 0;
- sel = readl(&exynos_clock->clk_src_fsys);
+ sel = read32(&exynos_clock->clk_src_fsys);
sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
if (sel == 0x3)
@@ -296,7 +296,7 @@ static unsigned long get_mmc_clk(int dev_index)
else
return 0;
- ratio = readl(&exynos_clock->clk_div_fsys1);
+ ratio = read32(&exynos_clock->clk_div_fsys1);
shift = dev_index * 10;
@@ -316,10 +316,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
addr = &exynos_clock->clk_div_fsys1;
shift = dev_index * 10;
- val = readl(addr);
+ val = read32(addr);
val &= ~(0x3ff << shift);
val |= (div & 0x3ff) << shift;
- writel(val, addr);
+ write32(addr, val);
}
/* Set DW MMC Controller clock */
@@ -546,10 +546,10 @@ int clock_set_mshci(enum periph_id peripheral)
printk(BIOS_DEBUG, "invalid peripheral\n");
return -1;
}
- tmp = readl(addr) & ~0xff0f;
+ tmp = read32(addr) & ~0xff0f;
for (i = 0; i <= 0xf; i++) {
if ((clock / (i + 1)) <= 400) {
- writel(tmp | i << 0, addr);
+ write32(addr, tmp | i << 0);
break;
}
}
@@ -563,7 +563,7 @@ int clock_epll_set_rate(unsigned long rate)
unsigned int lockcnt;
struct stopwatch sw;
- epll_con = readl(&exynos_clock->epll_con0);
+ epll_con = read32(&exynos_clock->epll_con0);
epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
EPLL_CON0_LOCK_DET_EN_SHIFT) |
EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
@@ -591,13 +591,13 @@ int clock_epll_set_rate(unsigned long rate)
*/
lockcnt = 3000 * epll_div[i].p_div;
- writel(lockcnt, &exynos_clock->epll_lock);
- writel(epll_con, &exynos_clock->epll_con0);
- writel(epll_con_k, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_lock, lockcnt);
+ write32(&exynos_clock->epll_con0, epll_con);
+ write32(&exynos_clock->epll_con1, epll_con_k);
stopwatch_init_msecs_expire(&sw, TIMEOUT_EPLL_LOCK);
- while (!(readl(&exynos_clock->epll_con0) &
+ while (!(read32(&exynos_clock->epll_con0) &
(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
if (stopwatch_expired(&sw)) {
printk(BIOS_DEBUG, "%s: Timeout waiting for EPLL lock\n", __func__);
diff --git a/src/soc/samsung/exynos5420/clock_init.c b/src/soc/samsung/exynos5420/clock_init.c
index 25b8beecd1..c5b4aaaa3f 100644
--- a/src/soc/samsung/exynos5420/clock_init.c
+++ b/src/soc/samsung/exynos5420/clock_init.c
@@ -35,186 +35,186 @@ void system_clock_init(void)
exynos_mct->g_tcon |= (1 << 8);
/* PLL locktime */
- writel(APLL_LOCK_VAL, &exynos_clock->apll_lock);
- writel(MPLL_LOCK_VAL, &exynos_clock->mpll_lock);
- writel(BPLL_LOCK_VAL, &exynos_clock->bpll_lock);
- writel(CPLL_LOCK_VAL, &exynos_clock->cpll_lock);
- writel(DPLL_LOCK_VAL, &exynos_clock->dpll_lock);
- writel(EPLL_LOCK_VAL, &exynos_clock->epll_lock);
- writel(VPLL_LOCK_VAL, &exynos_clock->vpll_lock);
- writel(IPLL_LOCK_VAL, &exynos_clock->ipll_lock);
- writel(SPLL_LOCK_VAL, &exynos_clock->spll_lock);
- writel(KPLL_LOCK_VAL, &exynos_clock->kpll_lock);
- writel(RPLL_LOCK_VAL, &exynos_clock->rpll_lock);
+ write32(&exynos_clock->apll_lock, APLL_LOCK_VAL);
+ write32(&exynos_clock->mpll_lock, MPLL_LOCK_VAL);
+ write32(&exynos_clock->bpll_lock, BPLL_LOCK_VAL);
+ write32(&exynos_clock->cpll_lock, CPLL_LOCK_VAL);
+ write32(&exynos_clock->dpll_lock, DPLL_LOCK_VAL);
+ write32(&exynos_clock->epll_lock, EPLL_LOCK_VAL);
+ write32(&exynos_clock->vpll_lock, VPLL_LOCK_VAL);
+ write32(&exynos_clock->ipll_lock, IPLL_LOCK_VAL);
+ write32(&exynos_clock->spll_lock, SPLL_LOCK_VAL);
+ write32(&exynos_clock->kpll_lock, KPLL_LOCK_VAL);
+ write32(&exynos_clock->rpll_lock, RPLL_LOCK_VAL);
setbits_le32(&exynos_clock->clk_src_cpu, MUX_HPM_SEL_MASK);
- writel(0, &exynos_clock->clk_src_top6);
+ write32(&exynos_clock->clk_src_top6, 0);
- writel(0, &exynos_clock->clk_src_cdrex);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(HPM_RATIO, &exynos_clock->clk_div_cpu1);
- writel(CLK_DIV_CPU0_VAL, &exynos_clock->clk_div_cpu0);
+ write32(&exynos_clock->clk_src_cdrex, 0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_cpu1, HPM_RATIO);
+ write32(&exynos_clock->clk_div_cpu0, CLK_DIV_CPU0_VAL);
/* switch A15 clock source to OSC clock before changing APLL */
clrbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
/* Set APLL */
- writel(APLL_CON1_VAL, &exynos_clock->apll_con1);
+ write32(&exynos_clock->apll_con1, APLL_CON1_VAL);
val = set_pll(225, 3, 0); /* FOUT=1800MHz */
- writel(val, &exynos_clock->apll_con0);
- while ((readl(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->apll_con0, val);
+ while ((read32(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to APLL */
setbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(CLK_DIV_KFC_VAL, &exynos_clock->clk_div_kfc0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_kfc0, CLK_DIV_KFC_VAL);
/* switch A7 clock source to OSC clock before changing KPLL */
clrbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set KPLL*/
- writel(KPLL_CON1_VAL, &exynos_clock->kpll_con1);
+ write32(&exynos_clock->kpll_con1, KPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->kpll_con0);
- while ((readl(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->kpll_con0, val);
+ while ((read32(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to KPLL */
setbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set MPLL */
- writel(MPLL_CON1_VAL, &exynos_clock->mpll_con1);
+ write32(&exynos_clock->mpll_con1, MPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->mpll_con0);
- while ((readl(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->mpll_con0, val);
+ while ((read32(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
;
/* Set DPLL */
- writel(DPLL_CON1_VAL, &exynos_clock->dpll_con1);
+ write32(&exynos_clock->dpll_con1, DPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->dpll_con0);
- while ((readl(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->dpll_con0, val);
+ while ((read32(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
;
/* Set EPLL */
- writel(EPLL_CON2_VAL, &exynos_clock->epll_con2);
- writel(EPLL_CON1_VAL, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_con2, EPLL_CON2_VAL);
+ write32(&exynos_clock->epll_con1, EPLL_CON1_VAL);
val = set_pll(0x64, 0x2, 0x1);
- writel(val, &exynos_clock->epll_con0);
- while ((readl(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->epll_con0, val);
+ while ((read32(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
;
/* Set CPLL */
- writel(CPLL_CON1_VAL, &exynos_clock->cpll_con1);
+ write32(&exynos_clock->cpll_con1, CPLL_CON1_VAL);
val = set_pll(0xde, 0x4, 0x1);
- writel(val, &exynos_clock->cpll_con0);
- while ((readl(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->cpll_con0, val);
+ while ((read32(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
;
/* Set IPLL */
- writel(IPLL_CON1_VAL, &exynos_clock->ipll_con1);
+ write32(&exynos_clock->ipll_con1, IPLL_CON1_VAL);
val = set_pll(0xB9, 0x3, 0x2);
- writel(val, &exynos_clock->ipll_con0);
- while ((readl(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->ipll_con0, val);
+ while ((read32(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
;
/* Set VPLL */
- writel(VPLL_CON1_VAL, &exynos_clock->vpll_con1);
+ write32(&exynos_clock->vpll_con1, VPLL_CON1_VAL);
val = set_pll(0xd7, 0x3, 0x2);
- writel(val, &exynos_clock->vpll_con0);
- while ((readl(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->vpll_con0, val);
+ while ((read32(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
;
/* Set BPLL */
- writel(BPLL_CON1_VAL, &exynos_clock->bpll_con1);
+ write32(&exynos_clock->bpll_con1, BPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->bpll_con0);
- while ((readl(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->bpll_con0, val);
+ while ((read32(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
;
/* Set SPLL */
- writel(SPLL_CON1_VAL, &exynos_clock->spll_con1);
+ write32(&exynos_clock->spll_con1, SPLL_CON1_VAL);
val = set_pll(200, 0x3, 0x2); /* 400MHz */
- writel(val, &exynos_clock->spll_con0);
- while ((readl(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->spll_con0, val);
+ while ((read32(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
;
/* We use RPLL as the source for FIMD video stream clock */
- writel(RPLL_CON1_VAL, &exynos_clock->rpll_con1);
- writel(RPLL_CON2_VAL, &exynos_clock->rpll_con2);
+ write32(&exynos_clock->rpll_con1, RPLL_CON1_VAL);
+ write32(&exynos_clock->rpll_con2, RPLL_CON2_VAL);
/* computed by gabe from first principles; u-boot is probably
* wrong again
*/
val = set_pll(0xa0, 0x3, 0x2);
- writel(val, &exynos_clock->rpll_con0);
+ write32(&exynos_clock->rpll_con0, val);
/* note: this is a meaningless exercise. The hardware lock
* detection does not work. So this just spins for some
* time and is done. NO indication of success should attach
* to this or any other spin on a con0 value.
*/
- while ((readl(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
+ while ((read32(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
;
- writel(CLK_DIV_CDREX0_VAL, &exynos_clock->clk_div_cdrex0);
- writel(CLK_DIV_CDREX1_VAL, &exynos_clock->clk_div_cdrex1);
+ write32(&exynos_clock->clk_div_cdrex0, CLK_DIV_CDREX0_VAL);
+ write32(&exynos_clock->clk_div_cdrex1, CLK_DIV_CDREX1_VAL);
- writel(CLK_SRC_TOP0_VAL, &exynos_clock->clk_src_top0);
- writel(CLK_SRC_TOP1_VAL, &exynos_clock->clk_src_top1);
- writel(CLK_SRC_TOP2_VAL, &exynos_clock->clk_src_top2);
- writel(CLK_SRC_TOP7_VAL, &exynos_clock->clk_src_top7);
+ write32(&exynos_clock->clk_src_top0, CLK_SRC_TOP0_VAL);
+ write32(&exynos_clock->clk_src_top1, CLK_SRC_TOP1_VAL);
+ write32(&exynos_clock->clk_src_top2, CLK_SRC_TOP2_VAL);
+ write32(&exynos_clock->clk_src_top7, CLK_SRC_TOP7_VAL);
- writel(CLK_DIV_TOP0_VAL, &exynos_clock->clk_div_top0);
- writel(CLK_DIV_TOP1_VAL, &exynos_clock->clk_div_top1);
- writel(CLK_DIV_TOP2_VAL, &exynos_clock->clk_div_top2);
+ write32(&exynos_clock->clk_div_top0, CLK_DIV_TOP0_VAL);
+ write32(&exynos_clock->clk_div_top1, CLK_DIV_TOP1_VAL);
+ write32(&exynos_clock->clk_div_top2, CLK_DIV_TOP2_VAL);
- writel(0, &exynos_clock->clk_src_top10);
- writel(0, &exynos_clock->clk_src_top11);
- writel(0, &exynos_clock->clk_src_top12);
+ write32(&exynos_clock->clk_src_top10, 0);
+ write32(&exynos_clock->clk_src_top11, 0);
+ write32(&exynos_clock->clk_src_top12, 0);
- writel(CLK_SRC_TOP3_VAL, &exynos_clock->clk_src_top3);
- writel(CLK_SRC_TOP4_VAL, &exynos_clock->clk_src_top4);
- writel(CLK_SRC_TOP5_VAL, &exynos_clock->clk_src_top5);
+ write32(&exynos_clock->clk_src_top3, CLK_SRC_TOP3_VAL);
+ write32(&exynos_clock->clk_src_top4, CLK_SRC_TOP4_VAL);
+ write32(&exynos_clock->clk_src_top5, CLK_SRC_TOP5_VAL);
/* DISP1 BLK CLK SELECTION */
- writel(CLK_SRC_DISP1_0_VAL, &exynos_clock->clk_src_disp10);
- writel(CLK_DIV_DISP1_0_VAL, &exynos_clock->clk_div_disp10);
+ write32(&exynos_clock->clk_src_disp10, CLK_SRC_DISP1_0_VAL);
+ write32(&exynos_clock->clk_div_disp10, CLK_DIV_DISP1_0_VAL);
/* AUDIO BLK */
- writel(AUDIO0_SEL_EPLL, &exynos_clock->clk_src_mau);
- writel(DIV_MAU_VAL, &exynos_clock->clk_div_mau);
+ write32(&exynos_clock->clk_src_mau, AUDIO0_SEL_EPLL);
+ write32(&exynos_clock->clk_div_mau, DIV_MAU_VAL);
/* FSYS */
- writel(CLK_SRC_FSYS0_VAL, &exynos_clock->clk_src_fsys);
- writel(CLK_DIV_FSYS0_VAL, &exynos_clock->clk_div_fsys0);
- writel(CLK_DIV_FSYS1_VAL, &exynos_clock->clk_div_fsys1);
- writel(CLK_DIV_FSYS2_VAL, &exynos_clock->clk_div_fsys2);
-
- writel(CLK_SRC_ISP_VAL, &exynos_clock->clk_src_isp);
- writel(CLK_DIV_ISP0_VAL, &exynos_clock->clk_div_isp0);
- writel(CLK_DIV_ISP1_VAL, &exynos_clock->clk_div_isp1);
-
- writel(CLK_SRC_PERIC0_VAL, &exynos_clock->clk_src_peric0);
- writel(CLK_SRC_PERIC1_VAL, &exynos_clock->clk_src_peric1);
-
- writel(CLK_DIV_PERIC0_VAL, &exynos_clock->clk_div_peric0);
- writel(CLK_DIV_PERIC1_VAL, &exynos_clock->clk_div_peric1);
- writel(CLK_DIV_PERIC2_VAL, &exynos_clock->clk_div_peric2);
- writel(CLK_DIV_PERIC3_VAL, &exynos_clock->clk_div_peric3);
- writel(CLK_DIV_PERIC4_VAL, &exynos_clock->clk_div_peric4);
-
- writel(CLK_DIV_CPERI1_VAL, &exynos_clock->clk_div_cperi1);
-
- writel(CLK_DIV2_RATIO, &exynos_clock->clkdiv2_ratio);
- writel(CLK_DIV4_RATIO, &exynos_clock->clkdiv4_ratio);
- writel(CLK_DIV_G2D, &exynos_clock->clk_div_g2d);
-
- writel(CLK_SRC_CPU_VAL, &exynos_clock->clk_src_cpu);
- writel(CLK_SRC_TOP6_VAL, &exynos_clock->clk_src_top6);
- writel(CLK_SRC_CDREX_VAL, &exynos_clock->clk_src_cdrex);
- writel(CLK_SRC_KFC_VAL, &exynos_clock->clk_src_kfc);
+ write32(&exynos_clock->clk_src_fsys, CLK_SRC_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys0, CLK_DIV_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys1, CLK_DIV_FSYS1_VAL);
+ write32(&exynos_clock->clk_div_fsys2, CLK_DIV_FSYS2_VAL);
+
+ write32(&exynos_clock->clk_src_isp, CLK_SRC_ISP_VAL);
+ write32(&exynos_clock->clk_div_isp0, CLK_DIV_ISP0_VAL);
+ write32(&exynos_clock->clk_div_isp1, CLK_DIV_ISP1_VAL);
+
+ write32(&exynos_clock->clk_src_peric0, CLK_SRC_PERIC0_VAL);
+ write32(&exynos_clock->clk_src_peric1, CLK_SRC_PERIC1_VAL);
+
+ write32(&exynos_clock->clk_div_peric0, CLK_DIV_PERIC0_VAL);
+ write32(&exynos_clock->clk_div_peric1, CLK_DIV_PERIC1_VAL);
+ write32(&exynos_clock->clk_div_peric2, CLK_DIV_PERIC2_VAL);
+ write32(&exynos_clock->clk_div_peric3, CLK_DIV_PERIC3_VAL);
+ write32(&exynos_clock->clk_div_peric4, CLK_DIV_PERIC4_VAL);
+
+ write32(&exynos_clock->clk_div_cperi1, CLK_DIV_CPERI1_VAL);
+
+ write32(&exynos_clock->clkdiv2_ratio, CLK_DIV2_RATIO);
+ write32(&exynos_clock->clkdiv4_ratio, CLK_DIV4_RATIO);
+ write32(&exynos_clock->clk_div_g2d, CLK_DIV_G2D);
+
+ write32(&exynos_clock->clk_src_cpu, CLK_SRC_CPU_VAL);
+ write32(&exynos_clock->clk_src_top6, CLK_SRC_TOP6_VAL);
+ write32(&exynos_clock->clk_src_cdrex, CLK_SRC_CDREX_VAL);
+ write32(&exynos_clock->clk_src_kfc, CLK_SRC_KFC_VAL);
}
void clock_gate(void)
diff --git a/src/soc/samsung/exynos5420/dmc_common.c b/src/soc/samsung/exynos5420/dmc_common.c
index cb1546e61a..c6fe09d705 100644
--- a/src/soc/samsung/exynos5420/dmc_common.c
+++ b/src/soc/samsung/exynos5420/dmc_common.c
@@ -45,19 +45,19 @@ int dmc_config_zq(struct mem_timings *mem,
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
@@ -67,22 +67,22 @@ int dmc_config_zq(struct mem_timings *mem,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy0_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy1_ctrl->phy_con16, val);
return 0;
}
@@ -93,18 +93,18 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
/* Update DLL Information: Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val |= FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
/* Reset Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val &= ~FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
@@ -121,7 +121,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
- writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_NOP | mask);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
@@ -132,15 +132,15 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
- writel(mem->direct_cmd_msr[i] | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ mem->direct_cmd_msr[i] | mask);
udelay(100);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
- writel(DIRECT_CMD_ZQINIT | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ DIRECT_CMD_ZQINIT | mask);
/*
* FIXME: This was originally sdelay(10000)
* in the imported u-boot code. That may have
@@ -166,7 +166,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
- writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_PALL | mask);
udelay(100);
}
}
diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
index 8186b6dbdf..6972618ac3 100644
--- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
@@ -47,40 +47,40 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
/* Enable BYPASS mode */
setbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
- writel(MUX_BPLL_SEL_FOUTBPLL, &exynos_clock->clk_src_cdrex);
+ write32(&exynos_clock->clk_src_cdrex, MUX_BPLL_SEL_FOUTBPLL);
do {
- val = readl(&exynos_clock->clk_mux_stat_cdrex);
+ val = read32(&exynos_clock->clk_mux_stat_cdrex);
val &= BPLL_SEL_MASK;
} while (val != FOUTBPLL);
clrbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
/* Specify the DDR memory type as DDR3 */
- val = readl(&exynos_phy0_control->phy_con0);
+ val = read32(&exynos_phy0_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy0_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
- val = readl(&exynos_phy1_control->phy_con0);
+ val = read32(&exynos_phy1_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy1_control->phy_con0, val);
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
- writel(val, &exynos_phy0_control->phy_con42);
- writel(val, &exynos_phy1_control->phy_con42);
+ write32(&exynos_phy0_control->phy_con42, val);
+ write32(&exynos_phy1_control->phy_con42, val);
- val = readl(&exynos_phy0_control->phy_con26);
+ val = read32(&exynos_phy0_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy0_control->phy_con26);
+ write32(&exynos_phy0_control->phy_con26, val);
- val = readl(&exynos_phy1_control->phy_con26);
+ val = read32(&exynos_phy1_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy1_control->phy_con26);
+ write32(&exynos_phy1_control->phy_con26, val);
/* Set Driver strength for CK, CKE, CS & CA to 0x7
* Set Driver strength for Data Slice 0~3 to 0x6
@@ -89,8 +89,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
- writel(val, &exynos_phy0_control->phy_con39);
- writel(val, &exynos_phy1_control->phy_con39);
+ write32(&exynos_phy0_control->phy_con39, val);
+ write32(&exynos_phy1_control->phy_con39, val);
/* ZQ Calibration */
if (dmc_config_zq(mem, exynos_phy0_control, exynos_phy1_control))
@@ -100,31 +100,27 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
clrbits_le32(&exynos_phy1_control->phy_con16, ZQ_CLK_DIV_EN);
/* DQ Signal */
- val = readl(&exynos_phy0_control->phy_con14);
+ val = read32(&exynos_phy0_control->phy_con14);
val |= mem->phy0_pulld_dqs;
- writel(val, &exynos_phy0_control->phy_con14);
- val = readl(&exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, val);
+ val = read32(&exynos_phy1_control->phy_con14);
val |= mem->phy1_pulld_dqs;
- writel(val, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy1_control->phy_con14, val);
val = MEM_TERM_EN | PHY_TERM_EN;
- writel(val, &exynos_drex0->phycontrol0);
- writel(val, &exynos_drex1->phycontrol0);
-
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex0->concontrol);
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->phycontrol0, val);
+ write32(&exynos_drex1->phycontrol0, val);
+
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
do {
- val = readl(&exynos_drex0->phystatus);
+ val = read32(&exynos_drex0->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
do {
- val = readl(&exynos_drex1->phystatus);
+ val = read32(&exynos_drex1->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
clrbits_le32(&exynos_drex0->concontrol, DFI_INIT_START);
@@ -134,41 +130,41 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
update_reset_dll(exynos_drex1, mem->mem_type);
/* MEMBASECONFIG0 (CS0) */
- writel(mem->membaseconfig0, &exynos_tzasc0->membaseconfig0);
- writel(mem->membaseconfig0, &exynos_tzasc1->membaseconfig0);
+ write32(&exynos_tzasc0->membaseconfig0, mem->membaseconfig0);
+ write32(&exynos_tzasc1->membaseconfig0, mem->membaseconfig0);
/* MEMBASECONFIG1 (CS1) */
if (mem->chips_per_channel == 2) {
- writel(mem->membaseconfig1, &exynos_tzasc0->membaseconfig1);
- writel(mem->membaseconfig1, &exynos_tzasc1->membaseconfig1);
+ write32(&exynos_tzasc0->membaseconfig1, mem->membaseconfig1);
+ write32(&exynos_tzasc1->membaseconfig1, mem->membaseconfig1);
}
/* Memory Channel Interleaving Size
* Exynos5420 Channel interleaving = 128 bytes
*/
/* MEMCONFIG0/1 */
- writel(mem->memconfig, &exynos_tzasc0->memconfig0);
- writel(mem->memconfig, &exynos_tzasc1->memconfig0);
- writel(mem->memconfig, &exynos_tzasc0->memconfig1);
- writel(mem->memconfig, &exynos_tzasc1->memconfig1);
+ write32(&exynos_tzasc0->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc0->memconfig1, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig1, mem->memconfig);
/* Precharge Configuration */
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex0->prechconfig0);
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex1->prechconfig0);
+ write32(&exynos_drex0->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
+ write32(&exynos_drex1->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingref
* values as per Memory AC parameters
*/
- writel(mem->timing_ref, &exynos_drex0->timingref);
- writel(mem->timing_ref, &exynos_drex1->timingref);
- writel(mem->timing_row, &exynos_drex0->timingrow);
- writel(mem->timing_row, &exynos_drex1->timingrow);
- writel(mem->timing_data, &exynos_drex0->timingdata);
- writel(mem->timing_data, &exynos_drex1->timingdata);
- writel(mem->timing_power, &exynos_drex0->timingpower);
- writel(mem->timing_power, &exynos_drex1->timingpower);
+ write32(&exynos_drex0->timingref, mem->timing_ref);
+ write32(&exynos_drex1->timingref, mem->timing_ref);
+ write32(&exynos_drex0->timingrow, mem->timing_row);
+ write32(&exynos_drex1->timingrow, mem->timing_row);
+ write32(&exynos_drex0->timingdata, mem->timing_data);
+ write32(&exynos_drex1->timingdata, mem->timing_data);
+ write32(&exynos_drex0->timingpower, mem->timing_power);
+ write32(&exynos_drex1->timingpower, mem->timing_power);
if (reset) {
/* Send NOP, MRS and ZQINIT commands.
@@ -189,8 +185,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
* release pad retention and retain the memory content until the
* initialization is complete.
*/
- writel(PAD_RETENTION_DRAM_COREBLK_VAL,
- &exynos_power->padret_dram_cblk_opt);
+ write32(&exynos_power->padret_dram_cblk_opt,
+ PAD_RETENTION_DRAM_COREBLK_VAL);
do {
ret = read32(&exynos_power->padret_dram_status);
} while (ret != 0x1);
@@ -201,57 +197,55 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
*/
for (i = 0; i < 128; i++) {
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
}
}
}
if (mem->gate_leveling_enable) {
- writel(PHY_CON0_RESET_VAL, &exynos_phy0_control->phy_con0);
- writel(PHY_CON0_RESET_VAL, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, PHY_CON0_RESET_VAL);
+ write32(&exynos_phy1_control->phy_con0, PHY_CON0_RESET_VAL);
setbits_le32(&exynos_phy0_control->phy_con0, P0_CMD_EN);
setbits_le32(&exynos_phy1_control->phy_con0, P0_CMD_EN);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- nLockR = readl(&exynos_phy0_control->phy_con13);
+ nLockR = read32(&exynos_phy0_control->phy_con13);
nLockW_phy0 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy0_control->phy_con12);
+ nLockR = read32(&exynos_phy0_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy0;
- writel(nLockR, &exynos_phy0_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, nLockR);
- nLockR = readl(&exynos_phy1_control->phy_con13);
+ nLockR = read32(&exynos_phy1_control->phy_con13);
nLockW_phy1 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy1_control->phy_con12);
+ nLockR = read32(&exynos_phy1_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy1;
- writel(nLockR, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy1_control->phy_con12, nLockR);
val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
setbits_le32(&exynos_phy0_control->phy_con2, RDLVL_GATE_EN);
@@ -260,17 +254,17 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
setbits_le32(&exynos_phy0_control->phy_con0, CTRL_SHGATE);
setbits_le32(&exynos_phy1_control->phy_con0, CTRL_SHGATE);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -281,11 +275,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -296,23 +290,23 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(0, &exynos_phy0_control->phy_con14);
- writel(0, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, 0);
+ write32(&exynos_phy1_control->phy_con14, 0);
val = (0x3 << DIRECT_CMD_BANK_SHIFT);
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
/* Common Settings for Leveling */
val = PHY_CON12_RESET_VAL;
- writel((val + nLockW_phy0), &exynos_phy0_control->phy_con12);
- writel((val + nLockW_phy1), &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, (val + nLockW_phy0));
+ write32(&exynos_phy1_control->phy_con12, (val + nLockW_phy1));
setbits_le32(&exynos_phy0_control->phy_con2, DLL_DESKEW_EN);
setbits_le32(&exynos_phy1_control->phy_con2, DLL_DESKEW_EN);
@@ -322,22 +316,18 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
dmc_config_prech(mem, exynos_drex0);
dmc_config_prech(mem, exynos_drex1);
- writel(mem->memcontrol, &exynos_drex0->memcontrol);
- writel(mem->memcontrol, &exynos_drex1->memcontrol);
+ write32(&exynos_drex0->memcontrol, mem->memcontrol);
+ write32(&exynos_drex1->memcontrol, mem->memcontrol);
/*
* Set DMC Concontrol: Enable auto-refresh counter, provide
* read data fetch cycles and enable DREX auto set powerdown
* for input buffer of I/O in none read memory state.
*/
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex0->concontrol);
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
/* Enable Clock Gating Control for DMC
* this saves around 25 mw dmc power as compared to the power
diff --git a/src/soc/samsung/exynos5420/dp_lowlevel.c b/src/soc/samsung/exynos5420/dp_lowlevel.c
index 5a3adf907e..f56148fec3 100644
--- a/src/soc/samsung/exynos5420/dp_lowlevel.c
+++ b/src/soc/samsung/exynos5420/dp_lowlevel.c
@@ -55,7 +55,7 @@ static inline unsigned long fradl(void *v) {
#define lread32(a) fradl((void *)(a))
#else
-#define lwrite32(a,b) writel((unsigned long)(a), (void *)(b))
+#define lwrite32(a,b) write32((void *)(b), (unsigned long)(a))
#define lread32(a) read32((void *)(a))
#endif
diff --git a/src/soc/samsung/exynos5420/fimd.c b/src/soc/samsung/exynos5420/fimd.c
index dfd123254c..8059f49f1a 100644
--- a/src/soc/samsung/exynos5420/fimd.c
+++ b/src/soc/samsung/exynos5420/fimd.c
@@ -47,8 +47,8 @@ static inline unsigned long fradl(void *v) {
#define lreadl(a) fradl((void *)(a))
#else
-#define lwritel(a,b) writel((unsigned long)(a), (void *)(b))
-#define lreadl(a) readl((void *)(a))
+#define lwritel(a,b) write32((void *)(b), (unsigned long)(a))
+#define lreadl(a) read32((void *)(a))
#endif
/* not sure where we want this so ... */
diff --git a/src/soc/samsung/exynos5420/gpio.c b/src/soc/samsung/exynos5420/gpio.c
index 92cdc28fc0..0a53018b3f 100644
--- a/src/soc/samsung/exynos5420/gpio.c
+++ b/src/soc/samsung/exynos5420/gpio.c
@@ -82,10 +82,10 @@ void gpio_cfg_pin(int gpio, int cfg)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->con);
+ value = read32(&bank->con);
value &= ~CON_MASK(GPIO_BIT(gpio));
value |= CON_SFR(GPIO_BIT(gpio), cfg);
- writel(value, &bank->con);
+ write32(&bank->con, value);
}
static int gpio_get_cfg(int gpio)
@@ -93,7 +93,7 @@ static int gpio_get_cfg(int gpio)
struct gpio_bank *bank = gpio_get_bank(gpio);
int shift = GPIO_BIT(gpio) << 2;
- return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
+ return (read32(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
}
void gpio_set_pull(int gpio, int mode)
@@ -101,7 +101,7 @@ void gpio_set_pull(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->pull);
+ value = read32(&bank->pull);
value &= ~PULL_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -113,7 +113,7 @@ void gpio_set_pull(int gpio, int mode)
break;
}
- writel(value, &bank->pull);
+ write32(&bank->pull, value);
}
void gpio_set_drv(int gpio, int mode)
@@ -121,7 +121,7 @@ void gpio_set_drv(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~DRV_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -135,7 +135,7 @@ void gpio_set_drv(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
void gpio_set_rate(int gpio, int mode)
@@ -143,7 +143,7 @@ void gpio_set_rate(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~RATE_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -155,7 +155,7 @@ void gpio_set_rate(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
int gpio_direction_input(unsigned gpio)
@@ -170,11 +170,11 @@ int gpio_direction_output(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
gpio_cfg_pin(gpio, GPIO_OUTPUT);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->dat);
+ value = read32(&bank->dat);
return !!(value & DAT_MASK(GPIO_BIT(gpio)));
}
@@ -195,11 +195,11 @@ int gpio_set_value(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
return 0;
}
diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c
index 28e3f0c331..1b541b7326 100644
--- a/src/soc/samsung/exynos5420/i2c.c
+++ b/src/soc/samsung/exynos5420/i2c.c
@@ -270,7 +270,7 @@ static int hsi2c_get_clk_details(struct i2c_bus *i2c, int *div, int *cycle,
* temp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
* temp1 = (TSCLK_L + TSCLK_H + 2)
*/
- uint32_t flt_cycle = (readl(&regs->i2c_conf) >> 16) & 0x7;
+ uint32_t flt_cycle = (read32(&regs->i2c_conf) >> 16) & 0x7;
int temp = (clkin / op_clk) - 8 - 2 * flt_cycle;
// CLK_DIV max is 256.
@@ -310,18 +310,18 @@ static void hsi2c_ch_init(struct i2c_bus *i2c, unsigned int frequency)
uint32_t timing_sla = data_hd << 0;
// Currently operating in fast speed mode.
- writel(timing_fs1, &regs->i2c_timing_fs1);
- writel(timing_fs2, &regs->i2c_timing_fs2);
- writel(timing_fs3, &regs->i2c_timing_fs3);
- writel(timing_sla, &regs->i2c_timing_sla);
+ write32(&regs->i2c_timing_fs1, timing_fs1);
+ write32(&regs->i2c_timing_fs2, timing_fs2);
+ write32(&regs->i2c_timing_fs3, timing_fs3);
+ write32(&regs->i2c_timing_sla, timing_sla);
// Clear to enable timeout.
- writel(readl(&regs->i2c_timeout) & ~Hsi2cTimeoutEn,
- &regs->i2c_timeout);
+ write32(&regs->i2c_timeout,
+ read32(&regs->i2c_timeout) & ~Hsi2cTimeoutEn);
- writel(Hsi2cTrailingCount, &regs->usi_trailing_ctl);
- writel(Hsi2cRxfifoEn | Hsi2cTxfifoEn, &regs->usi_fifo_ctl);
- writel(readl(&regs->i2c_conf) | Hsi2cAutoMode, &regs->i2c_conf);
+ write32(&regs->usi_trailing_ctl, Hsi2cTrailingCount);
+ write32(&regs->usi_fifo_ctl, Hsi2cRxfifoEn | Hsi2cTxfifoEn);
+ write32(&regs->i2c_conf, read32(&regs->i2c_conf) | Hsi2cAutoMode);
}
static void hsi2c_reset(struct i2c_bus *i2c)
@@ -329,8 +329,8 @@ static void hsi2c_reset(struct i2c_bus *i2c)
struct hsi2c_regs *regs = i2c->hsregs;
// Set and clear the bit for reset.
- writel(readl(&regs->usi_ctl) | Hsi2cSwRst, &regs->usi_ctl);
- writel(readl(&regs->usi_ctl) & ~Hsi2cSwRst, &regs->usi_ctl);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) | Hsi2cSwRst);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) & ~Hsi2cSwRst);
/* FIXME: This just assumes 100KHz as a default bus freq */
hsi2c_ch_init(i2c, 100000);
@@ -356,13 +356,13 @@ static void i2c_ch_init(struct i2c_bus *i2c, int speed)
// Set prescaler, divisor according to freq, also set ACKGEN, IRQ.
val = (div & 0x0f) | 0xa0 | ((pres == 512) ? 0x40 : 0);
- writel(val, &regs->con);
+ write32(&regs->con, val);
// Init to SLAVE RECEIVE mode and clear I2CADDn.
- writel(0, &regs->stat);
- writel(0, &regs->add);
+ write32(&regs->stat, 0);
+ write32(&regs->add, 0);
// program Master Transmit (and implicit STOP).
- writel(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write32(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
}
void i2c_init(unsigned bus, int speed, int slaveadd)
@@ -430,7 +430,7 @@ static int hsi2c_senddata(struct hsi2c_regs *regs, const uint8_t *data, int len)
{
while (!hsi2c_check_transfer(regs) && len) {
if (!(read32(&regs->usi_fifo_stat) & Hsi2cTxFifoFull)) {
- writel(*data++, &regs->usi_txdata);
+ write32(&regs->usi_txdata, *data++);
len--;
}
}
@@ -452,7 +452,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
{
const uint32_t usi_ctl = Hsi2cFuncModeI2c | Hsi2cMaster;
- writel(HSI2C_SLV_ADDR_MAS(seg->chip), &regs->i2c_addr);
+ write32(&regs->i2c_addr, HSI2C_SLV_ADDR_MAS(seg->chip));
/*
* We really only want to stop after this transaction (I think) if the
@@ -465,14 +465,14 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
seg->len | Hsi2cMasterRun | Hsi2cStopAfterTrans;
if (seg->read) {
- writel(usi_ctl | Hsi2cRxchon, &regs->usi_ctl);
- writel(autoconf | Hsi2cReadWrite, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cRxchon);
+ write32(&regs->i2c_auto_conf, autoconf | Hsi2cReadWrite);
if (hsi2c_recvdata(regs, seg->buf, seg->len))
return -1;
} else {
- writel(usi_ctl | Hsi2cTxchon, &regs->usi_ctl);
- writel(autoconf, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cTxchon);
+ write32(&regs->i2c_auto_conf, autoconf);
if (hsi2c_senddata(regs, seg->buf, seg->len))
return -1;
@@ -481,7 +481,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
if (hsi2c_wait_for_transfer(regs) != 1)
return -1;
- writel(Hsi2cFuncModeI2c, &regs->usi_ctl);
+ write32(&regs->usi_ctl, Hsi2cFuncModeI2c);
return 0;
}
@@ -510,34 +510,34 @@ static int hsi2c_transfer(struct i2c_bus *i2c, struct i2c_seg *segments,
static int i2c_int_pending(struct i2c_regs *regs)
{
- return readb(&regs->con) & I2cConIntPending;
+ return read8(&regs->con) & I2cConIntPending;
}
static void i2c_clear_int(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConIntPending, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConIntPending);
}
static void i2c_ack_enable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) | I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) | I2cConAckGen);
}
static void i2c_ack_disable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConAckGen);
}
static int i2c_got_ack(struct i2c_regs *regs)
{
- return !(readb(&regs->stat) & I2cStatAck);
+ return !(read8(&regs->stat) & I2cStatAck);
}
static int i2c_wait_for_idle(struct i2c_regs *regs)
{
int timeout = 1000 * 100; // 1s.
while (timeout--) {
- if (!(readb(&regs->stat) & I2cStatBusy))
+ if (!(read8(&regs->stat) & I2cStatBusy))
return 0;
udelay(10);
}
@@ -562,17 +562,17 @@ static int i2c_wait_for_int(struct i2c_regs *regs)
static int i2c_send_stop(struct i2c_regs *regs)
{
- uint8_t mode = readb(&regs->stat) & (I2cStatModeMask);
- writeb(mode | I2cStatEnable, &regs->stat);
+ uint8_t mode = read8(&regs->stat) & (I2cStatModeMask);
+ write8(&regs->stat, mode | I2cStatEnable);
i2c_clear_int(regs);
return i2c_wait_for_idle(regs);
}
static int i2c_send_start(struct i2c_regs *regs, int read, int chip)
{
- writeb(chip << 1, &regs->ds);
+ write8(&regs->ds, chip << 1);
uint8_t mode = read ? I2cStatMasterRecv : I2cStatMasterXmit;
- writeb(mode | I2cStatStartStop | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, mode | I2cStatStartStop | I2cStatEnable);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -594,7 +594,7 @@ static int i2c_xmit_buf(struct i2c_regs *regs, uint8_t *data, int len)
int i;
for (i = 0; i < len; i++) {
- writeb(data[i], &regs->ds);
+ write8(&regs->ds, data[i]);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -624,7 +624,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
if (i2c_wait_for_int(regs))
return 1;
- data[i] = readb(&regs->ds);
+ data[i] = read8(&regs->ds);
}
return 0;
@@ -642,7 +642,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
if (!regs || i2c_wait_for_idle(regs))
return 1;
- writeb(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
int i;
for (i = 0; i < count; i++) {
diff --git a/src/soc/samsung/exynos5420/power.c b/src/soc/samsung/exynos5420/power.c
index c7d491dd23..1b8aaa67d1 100644
--- a/src/soc/samsung/exynos5420/power.c
+++ b/src/soc/samsung/exynos5420/power.c
@@ -89,5 +89,5 @@ void power_enable_xclkout(void)
void power_release_uart_retention(void)
{
- writel(1 << 28, &exynos_power->padret_uart_opt);
+ write32(&exynos_power->padret_uart_opt, 1 << 28);
}
diff --git a/src/soc/samsung/exynos5420/smp.c b/src/soc/samsung/exynos5420/smp.c
index 8775bc9baf..6c8fd06f20 100644
--- a/src/soc/samsung/exynos5420/smp.c
+++ b/src/soc/samsung/exynos5420/smp.c
@@ -152,7 +152,7 @@ static void enable_smp(void)
actlr |= ACTLR_SMP;
/* Dummy read to assure L2 access */
- val = readl(&exynos_power->inform0);
+ val = read32(&exynos_power->inform0);
val &= 0;
actlr |= val;
@@ -200,9 +200,9 @@ static void low_power_start(void)
/* On warm reset, because iRAM is not cleared, all cores will enter
* low_power_start, not the initial address. So we need to check reset
* status again, and jump to 0x0 in that case. */
- reg_val = readl(&exynos_power->spare0);
+ reg_val = read32(&exynos_power->spare0);
if (reg_val != RST_FLAG_VAL) {
- writel(0x0, VECTOR_LOW_POWER_FLAG);
+ write32(VECTOR_LOW_POWER_FLAG, 0x0);
jump_bx(CORE_RESET_INIT_ADDRESS);
/* restart cpu execution and never returns. */
}
@@ -211,9 +211,9 @@ static void low_power_start(void)
* path, bypassing first jump address and makes final jump address 0x0,
* so we try to make any core set again low_power_start address, if that
* becomes zero. */
- reg_val = readl(VECTOR_CORE_SEV_HANDLER);
+ reg_val = read32(VECTOR_CORE_SEV_HANDLER);
if (reg_val != (intptr_t)low_power_start) {
- writel((intptr_t)low_power_start, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)low_power_start);
dsb();
/* ask all cores to power on again. */
sev();
@@ -258,7 +258,7 @@ static void power_down_core(void)
* S5E5420A User Manual, 8.8.1.202, ARM_CORE0_CONFIGURATION, two bits to
* control power state in each power down level.
*/
- writel(0x0, &exynos_power->arm_core[core_id].config);
+ write32(&exynos_power->arm_core[core_id].config, 0x0);
/* S5E5420A User Manual, 8.4.2.5, after ARM_CORE*_CONFIGURATION has been
* set to zero, PMU will detect and wait for WFI then run power-down
@@ -281,15 +281,15 @@ static void configure_secondary_cores(void)
* when we want to use SMP inside firmware. */
/* Clear boot reg (hotplug address) in cpu states */
- writel(0, (void*)&exynos_cpu_states->hotplug_address);
+ write32((void *)&exynos_cpu_states->hotplug_address, 0);
/* set low_power flag and address */
- writel((intptr_t)low_power_start, VECTOR_LOW_POWER_ADDRESS);
- writel(RST_FLAG_VAL, VECTOR_LOW_POWER_FLAG);
- writel(RST_FLAG_VAL, &exynos_power->spare0);
+ write32(VECTOR_LOW_POWER_ADDRESS, (intptr_t)low_power_start);
+ write32(VECTOR_LOW_POWER_FLAG, RST_FLAG_VAL);
+ write32(&exynos_power->spare0, RST_FLAG_VAL);
/* On next SEV, shutdown all cores. */
- writel((intptr_t)power_down_core, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)power_down_core);
/* Ask all cores in WFE mode to shutdown. */
dsb();
diff --git a/src/soc/samsung/exynos5420/spi.c b/src/soc/samsung/exynos5420/spi.c
index 6ceb92edd2..3d71f79529 100644
--- a/src/soc/samsung/exynos5420/spi.c
+++ b/src/soc/samsung/exynos5420/spi.c
@@ -69,9 +69,9 @@ static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
static void spi_sw_reset(struct exynos_spi *regs, int word)
{
- const uint32_t orig_mode_cfg = readl(&regs->mode_cfg);
+ const uint32_t orig_mode_cfg = read32(&regs->mode_cfg);
uint32_t mode_cfg = orig_mode_cfg;
- const uint32_t orig_swap_cfg = readl(&regs->swap_cfg);
+ const uint32_t orig_swap_cfg = read32(&regs->swap_cfg);
uint32_t swap_cfg = orig_swap_cfg;
mode_cfg &= ~(SPI_MODE_CH_WIDTH_MASK | SPI_MODE_BUS_WIDTH_MASK);
@@ -89,9 +89,9 @@ static void spi_sw_reset(struct exynos_spi *regs, int word)
}
if (mode_cfg != orig_mode_cfg)
- writel(mode_cfg, &regs->mode_cfg);
+ write32(&regs->mode_cfg, mode_cfg);
if (swap_cfg != orig_swap_cfg)
- writel(swap_cfg, &regs->swap_cfg);
+ write32(&regs->swap_cfg, swap_cfg);
clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
@@ -106,7 +106,7 @@ void spi_init(void)
static void exynos_spi_init(struct exynos_spi *regs)
{
// Set FB_CLK_SEL.
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ write32(&regs->fb_clk, SPI_FB_DELAY_180);
// CPOL: Active high.
clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L);
@@ -157,10 +157,10 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
out_bytes = in_bytes = packets * width;
spi_sw_reset(regs, width == 4);
- writel(packets | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, packets | SPI_PACKET_CNT_EN);
while (out_bytes || in_bytes) {
- uint32_t spi_sts = readl(&regs->spi_sts);
+ uint32_t spi_sts = read32(&regs->spi_sts);
int rx_lvl = ((spi_sts >> 15) & 0x1ff);
int tx_lvl = ((spi_sts >> 6) & 0x1ff);
@@ -171,13 +171,13 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
memcpy(&data, outb, width);
outb += width;
}
- writel(data, &regs->tx_data);
+ write32(&regs->tx_data, data);
out_bytes -= width;
}
if (rx_lvl >= width) {
- uint32_t data = readl(&regs->rx_data);
+ uint32_t data = read32(&regs->rx_data);
if (inb) {
memcpy(inb, &data, width);
diff --git a/src/soc/samsung/exynos5420/timer.c b/src/soc/samsung/exynos5420/timer.c
index 1e25771dbd..2abaf3bc5d 100644
--- a/src/soc/samsung/exynos5420/timer.c
+++ b/src/soc/samsung/exynos5420/timer.c
@@ -27,16 +27,15 @@ static const uint32_t clocks_per_usec = MCT_HZ/1000000;
static uint64_t mct_raw_value(void)
{
- uint64_t upper = readl(&exynos_mct->g_cnt_u);
- uint64_t lower = readl(&exynos_mct->g_cnt_l);
+ uint64_t upper = read32(&exynos_mct->g_cnt_u);
+ uint64_t lower = read32(&exynos_mct->g_cnt_l);
return (upper << 32) | lower;
}
void init_timer(void)
{
- writel(readl(&exynos_mct->g_tcon) | (0x1 << 8),
- &exynos_mct->g_tcon);
+ write32(&exynos_mct->g_tcon, read32(&exynos_mct->g_tcon) | (0x1 << 8));
}
void timer_monotonic_get(struct mono_time *mt)
diff --git a/src/soc/samsung/exynos5420/tmu.c b/src/soc/samsung/exynos5420/tmu.c
index 8ed78bba4a..19c72fdac3 100644
--- a/src/soc/samsung/exynos5420/tmu.c
+++ b/src/soc/samsung/exynos5420/tmu.c
@@ -80,7 +80,7 @@ static int get_cur_temp(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Temperature code range between min 25 and max 125 */
- cur_temp = readl(&reg->current_temp) & 0xff;
+ cur_temp = read32(&reg->current_temp) & 0xff;
/* Calibrate current temperature */
if (cur_temp)
@@ -142,10 +142,10 @@ static void tmu_setup_parameters(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Must reload for using efuse value at EXYNOS */
- writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+ write32(&reg->triminfo_control, TRIMINFO_RELOAD);
/* Get the compensation parameter */
- te_temp = readl(&reg->triminfo);
+ te_temp = read32(&reg->triminfo);
info->te1 = te_temp & TRIM_INFO_MASK;
info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
@@ -169,8 +169,8 @@ static void tmu_setup_parameters(struct tmu_info *info)
(hwtrip_code << 24));
/* Set interrupt level */
- writel(rising_value, &reg->threshold_temp_rise);
- writel(cooling_temp, &reg->threshold_temp_fall);
+ write32(&reg->threshold_temp_rise, rising_value);
+ write32(&reg->threshold_temp_fall, cooling_temp);
/*
* Need to init all register settings after getting parameter info
@@ -183,20 +183,20 @@ static void tmu_setup_parameters(struct tmu_info *info)
* TODO(bhthompson): rewrite this code such that we are not performing
* a hard wipe of tmu_control and re verify functionality.
*/
- writel(data->slope, &reg->tmu_control);
+ write32(&reg->tmu_control, data->slope);
- writel(INTCLEARALL, &reg->intclear);
+ write32(&reg->intclear, INTCLEARALL);
/* TMU core enable */
- con = readl(&reg->tmu_control);
+ con = read32(&reg->tmu_control);
con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
- writel(con, &reg->tmu_control);
+ write32(&reg->tmu_control, con);
/* Enable HW thermal trip */
power_enable_hw_thermal_trip();
/* LEV1 LEV2 interrupt enable */
- writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+ write32(&reg->inten, INTEN_RISE1 | INTEN_RISE2);
}
/*
diff --git a/src/soc/samsung/exynos5420/trustzone.c b/src/soc/samsung/exynos5420/trustzone.c
index 983690dbef..5712768355 100644
--- a/src/soc/samsung/exynos5420/trustzone.c
+++ b/src/soc/samsung/exynos5420/trustzone.c
@@ -33,10 +33,10 @@ void trustzone_init(void)
for (addr = TZPC10_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
+ write32(&tzpc->r0size, R0SIZE);
+ write32(&tzpc->decprot0set, DECPROTXSET);
+ write32(&tzpc->decprot1set, DECPROTXSET);
+ write32(&tzpc->decprot2set, DECPROTXSET);
+ write32(&tzpc->decprot3set, DECPROTXSET);
}
}
diff --git a/src/soc/samsung/exynos5420/uart.c b/src/soc/samsung/exynos5420/uart.c
index 74e5067b0d..bfdd54a891 100644
--- a/src/soc/samsung/exynos5420/uart.c
+++ b/src/soc/samsung/exynos5420/uart.c
@@ -66,7 +66,7 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
- writel(val / 16 - 1, &uart->ubrdiv);
+ write32(&uart->ubrdiv, val / 16 - 1);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
@@ -88,12 +88,12 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
static void exynos5_init_dev(struct s5p_uart *uart)
{
/* enable FIFOs */
- writel(0x1, &uart->ufcon);
- writel(0, &uart->umcon);
+ write32(&uart->ufcon, 0x1);
+ write32(&uart->umcon, 0);
/* 8N1 */
- writel(0x3, &uart->ulcon);
+ write32(&uart->ulcon, 0x3);
/* No interrupts, no DMA, pure polling */
- writel(0x245, &uart->ucon);
+ write32(&uart->ucon, 0x245);
serial_setbrg_dev(uart);
}
@@ -114,7 +114,7 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
else
mask = 0xf;
- return readl(&uart->uerstat) & mask;
+ return read32(&uart->uerstat) & mask;
}
/*
@@ -125,13 +125,13 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
- while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ while (!(read32(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
- return readb(&uart->urxh) & 0xff;
+ return read8(&uart->urxh) & 0xff;
}
/*
@@ -140,12 +140,12 @@ static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
- while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
+ while ((read32(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
- writeb(data, &uart->utxh);
+ write8(&uart->utxh, data);
}
uintptr_t uart_platform_base(int idx)
diff --git a/src/soc/samsung/exynos5420/usb.c b/src/soc/samsung/exynos5420/usb.c
index 0df63e2666..9313fea147 100644
--- a/src/soc/samsung/exynos5420/usb.c
+++ b/src/soc/samsung/exynos5420/usb.c
@@ -57,23 +57,13 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
- writel(0x1 << 24 | /* activate PHY low power states */
- 0x4 << 19 | /* low power delay value */
- 0x1 << 18 | /* activate PHY low power delay */
- 0x1 << 17 | /* enable SuperSpeed PHY suspend */
- 0x1 << 1 | /* default Tx deemphasis value */
- 0, &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- writel(0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
- 0x1 << 8 | /* enable PHY sleep in L1 */
- 0x1 << 6 | /* enable PHY suspend */
- 0, &dwc3->usb2phycfg);
-
- writel(0x5dc << 19 | /* suspend clock scale for 24MHz */
- 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
- 0x1 << 12 | /* port capability HOST */
- 0, &dwc3->ctl);
+ write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+
+ write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
}
void setup_usb_drd0_dwc3()
@@ -96,44 +86,25 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
setbits_le32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
- writel(1 << 6, &phy->utmi);
-
- writel(0x88 << 23 | /* spread spectrum refclk selector */
- 0x1 << 20 | /* enable spread spectrum */
- 0x1 << 19 | /* enable prescaler refclk */
- 0x68 << 11 | /* multiplier for 24MHz refclk */
- 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
- 0x1 << 4 | /* power supply in normal operating mode */
- 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
- 0x1 << 1 | /* force port reset */
- 0x1 << 0 | /* normal operating mode */
- 0, &phy->clkrst);
-
- writel(0x9 << 26 | /* LOS level */
- 0x3 << 22 | /* TX VREF tune */
- 0x1 << 20 | /* TX rise tune */
- 0x1 << 18 | /* TX res tune */
- 0x3 << 13 | /* TX HS X Vtune */
- 0x3 << 9 | /* TX FS/LS tune */
- 0x3 << 6 | /* SQRX tune */
- 0x4 << 3 | /* OTG tune */
- 0x4 << 0 | /* comp disc tune */
- 0, &phy->param0);
-
- writel(0x7f << 19 | /* reserved */
- 0x7f << 12 | /* Tx launch amplitude */
- 0x20 << 6 | /* Tx deemphasis 6dB */
- 0x1c << 0 | /* Tx deemphasis 3.5dB (value from U-Boot) */
- 0, &phy->param1);
+ write32(&phy->utmi, 1 << 6);
+
+ write32(&phy->clkrst,
+ 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+
+ write32(&phy->param0,
+ 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+
+ write32(&phy->param1,
+ 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
/* disable all test features */
- writel(0, &phy->test);
+ write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
- writel(0x1 << 2, &phy->utmiclksel);
+ write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
- writel(0x0, &phy->resume);
+ write32(&phy->resume, 0x0);
udelay(10);
clrbits_le32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
@@ -163,7 +134,7 @@ void setup_usb_host_phy(int hsic_gpio)
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
- hostphy_ctrl0 = readl(&exynos_usb_host_phy->usbphyctrl0);
+ hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
@@ -177,7 +148,7 @@ void setup_usb_host_phy(int hsic_gpio)
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &exynos_usb_host_phy->usbphyctrl0);
+ write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits_le32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |