summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/braswell/include/soc/gpio.h96
1 files changed, 0 insertions, 96 deletions
diff --git a/src/soc/intel/braswell/include/soc/gpio.h b/src/soc/intel/braswell/include/soc/gpio.h
index 24318c5e5e..db8e2a345c 100644
--- a/src/soc/intel/braswell/include/soc/gpio.h
+++ b/src/soc/intel/braswell/include/soc/gpio.h
@@ -128,16 +128,8 @@
/* Pad register offset */
#define PAD_CONF0_REG 0x0
#define PAD_CONF1_REG 0x4
-#define PAD_VAL_REG 0x8
-
-/* Some banks have no legacy GPIO interface */
-#define GP_LEGACY_BASE_NONE 0xFFFF
/* Number of GPIOs in each bank */
-#define GPNCORE_COUNT 27
-#define GPSCORE_COUNT 102
-#define GPSSUS_COUNT 44
-
#define GP_SOUTHWEST_COUNT 56
#define GP_NORTH_COUNT 59
#define GP_EAST_COUNT 24
@@ -146,8 +138,6 @@
/* General */
#define GPIO_REGS_SIZE 8
#define NA 0
-#define LOW 0
-#define HIGH 1
#define MASK_WAKE 0
#define UNMASK_WAKE 1
#define GPE_CAPABLE 1
@@ -354,13 +344,7 @@
#define GPIO_END \
{ .pad_conf0 = GPIO_LIST_END }
-/* 16 DirectIRQs per supported bank */
-#define GPIO_MAX_DIRQS 16
-
-#define GPIO_NONE 255
-
/* Functions / defines for changing GPIOs in romstage */
-/* SCORE Pad definitions. */
#define UART_RXD_PAD 82
#define UART_TXD_PAD 83
#define PCU_SMB_CLK_PAD 88
@@ -374,7 +358,6 @@
struct soc_gpio_map {
u32 pad_conf0;
u32 pad_conf1;
- u32 pad_val;
u32 gpe;
u32 int_mask:1;
u32 wake_mask:1;
@@ -393,39 +376,12 @@ struct soc_gpio_config {
struct gpio_bank {
const int gpio_count;
const u8 *gpio_to_pad;
- const int legacy_base;
const unsigned long pad_base;
const u8 has_gpe_en:1;
const u8 has_wake_en:1;
};
typedef enum {
- NATIVE = 0xff,
- GPIO = 0, /* Native, no need to set PAD_VALUE */
- GPO = 1, /* GPI, input only in PAD_VALUE */
- GPI = 2, /* GPO, output only in PAD_VALUE */
- HI_Z = 3,
- NA_GPO = 0,
-} gpio_en_t;
-
-typedef enum {
- LO = 0,
- HI = 1,
-} gpo_d4_t;
-
-typedef enum {
- F0 = 0,
- F1 = 1,
- F2 = 2,
- F3 = 3
-} gpio_func_num_t;
-
-typedef enum {
- _CAP = 1,
- _NOT_CAP = 0
-} int_capable_t;
-
-typedef enum {
P_NONE = 0, /* Pull None */
P_20K_L = 1, /* Pull Down 20K */
P_5K_L = 2, /* Pull Down 5K */
@@ -436,42 +392,6 @@ typedef enum {
} pull_type_t;
typedef enum {
- DISABLE = 0, /* Disable */
- ENABLE = 1, /* Enable */
-} park_mode_enb_t;
-
-typedef enum {
- VOLT_3_3 = 0, /* Working on 3.3 Volts */
- VOLT_1_8 = 1, /* Working on 1.8 Volts */
-} voltage_t;
-
-typedef enum {
- DISABLE_HS = 0, /* Disable high speed mode */
- ENABLE_HS = 1, /* Enable high speed mode */
-} hs_mode_t;
-
-typedef enum {
- PULL_UP = 0, /* On Die Termination Up */
- PULL_DOWN = 1, /* On Die Termination Down */
-} odt_up_dn_t;
-
-typedef enum {
- DISABLE_OD = 0, /* On Die Termination Disable */
- ENABLE_OD = 1, /* On Die Termination Enable */
-} odt_en_t;
-
-typedef enum {
- ONE_BIT = 1,
- TWO_BIT = 3,
- THREE_BIT = 7,
- FOUR_BIT = 15,
- FIVE_BIT = 31,
- SIX_BIT = 63,
- SEVEN_BIT = 127,
- EIGHT_BIT = 255
-} bit_t;
-
-typedef enum {
M0 = 0,
M1,
M2,
@@ -557,22 +477,6 @@ typedef enum {
void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap);
struct soc_gpio_config *mainboard_get_gpios(void);
-static inline void ncore_select_func(int pad, int func)
-{
-
-}
-
-/* These functions require that the input pad be configured as an input GPIO */
-
-static inline int ssus_get_gpio(int pad)
-{
- return 0;
-}
-
-static inline void ssus_disable_internal_pull(int pad)
-{
-}
-
typedef int gpio_t;
int get_gpio(int community_base, int pad0_offset);