summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/nvidia/tegra124/spi.c41
-rw-r--r--src/soc/nvidia/tegra124/spi.h3
-rw-r--r--src/soc/samsung/exynos5420/spi.c326
-rw-r--r--src/soc/samsung/exynos5420/spi.h6
4 files changed, 134 insertions, 242 deletions
diff --git a/src/soc/nvidia/tegra124/spi.c b/src/soc/nvidia/tegra124/spi.c
index ae8a9a7626..7ad771633c 100644
--- a/src/soc/nvidia/tegra124/spi.c
+++ b/src/soc/nvidia/tegra124/spi.c
@@ -23,6 +23,7 @@
#include <cbfs_core.h>
#include <inttypes.h>
#include <spi-generic.h>
+#include <spi_flash.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
@@ -722,16 +723,11 @@ int spi_xfer(struct spi_slave *slave, const void *dout,
u8 *out_buf = (u8 *)dout;
u8 *in_buf = (u8 *)din;
unsigned int todo;
- int ret = 0, frame_started = 1;
+ int ret = 0;
/* tegra bus numbers start at 1 */
ASSERT(slave->bus >= 1 && slave->bus <= ARRAY_SIZE(tegra_spi_channels));
- if (spi->rx_frame_header_enable) {
- memset(in_buf, ~spi->frame_header, in_bytes);
- frame_started = 0;
- }
-
while (out_bytes || in_bytes) {
int x = 0;
@@ -779,41 +775,14 @@ int spi_xfer(struct spi_slave *slave, const void *dout,
break;
}
- /*
- * Post-processing. For output, we only need to increment
- * the buffer and decrement the counter. Same for input if
- * there is no frame header to be concerned with.
- *
- * If a frame header is used and is found, the input buffer
- * is shifted so that the header starts at offset 0, and
- * in_bytes and in_buf are incremented/decremented according
- * to the offset where the header was originally found.
- */
+ /* Post-processing. */
if (out_bytes) {
out_bytes -= x;
out_buf += x;
}
if (in_bytes) {
- if (spi->rx_frame_header_enable && !frame_started) {
- int i;
-
- for (i = 0; i < x; i++) {
- if (in_buf[i] == spi->frame_header) {
- frame_started = 1;
- i++; /* discard frame header */
- break;
- }
- }
-
- if (frame_started) {
- memmove(&in_buf[0], &in_buf[i], x - i);
- in_bytes -= x - i;
- in_buf += x - i;
- }
- } else {
- in_bytes -= x;
- in_buf += x;
- }
+ in_bytes -= x;
+ in_buf += x;
}
}
diff --git a/src/soc/nvidia/tegra124/spi.h b/src/soc/nvidia/tegra124/spi.h
index 857c35f1b9..11e88feec5 100644
--- a/src/soc/nvidia/tegra124/spi.h
+++ b/src/soc/nvidia/tegra124/spi.h
@@ -54,9 +54,6 @@ struct tegra_spi_channel {
struct spi_slave slave;
unsigned int req_sel;
- /* stuff that is specific to the attached device */
- int rx_frame_header_enable;
- u8 frame_header;
int dual_mode; /* for x2 transfers with bit interleaving */
/* context (used internally) */
diff --git a/src/soc/samsung/exynos5420/spi.c b/src/soc/samsung/exynos5420/spi.c
index a2bbbb35b7..c8661e1852 100644
--- a/src/soc/samsung/exynos5420/spi.c
+++ b/src/soc/samsung/exynos5420/spi.c
@@ -23,6 +23,7 @@
#include <stdlib.h>
#include <assert.h>
#include <spi_flash.h>
+#include <string.h>
#include "cpu.h"
#include "spi.h"
@@ -38,9 +39,7 @@
struct exynos_spi_slave {
struct spi_slave slave;
struct exynos_spi *regs;
- unsigned int fifo_size;
- uint8_t half_duplex;
- uint8_t frame_header; /* header byte to detect in half-duplex mode. */
+ int initialized;
};
/* TODO(hungte) Move the SPI param list to per-board configuration, probably
@@ -55,17 +54,12 @@ static struct exynos_spi_slave exynos_spi_slaves[3] = {
{
.slave = { .bus = 1, .rw = SPI_READ_FLAG, },
.regs = (void *)EXYNOS5_SPI1_BASE,
- .fifo_size = 64,
- .half_duplex = 0,
},
// SPI 2
{
.slave = { .bus = 2,
.rw = SPI_READ_FLAG | SPI_WRITE_FLAG, },
.regs = (void *)EXYNOS5_SPI2_BASE,
- .fifo_size = 64,
- .half_duplex = 1,
- .frame_header = 0xec,
},
};
@@ -74,15 +68,69 @@ static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
return container_of(slave, struct exynos_spi_slave, slave);
}
+static void spi_sw_reset(struct exynos_spi *regs, int word)
+{
+ const uint32_t orig_mode_cfg = readl(&regs->mode_cfg);
+ uint32_t mode_cfg = orig_mode_cfg;
+ const uint32_t orig_swap_cfg = readl(&regs->swap_cfg);
+ uint32_t swap_cfg = orig_swap_cfg;
+
+ mode_cfg &= ~(SPI_MODE_CH_WIDTH_MASK | SPI_MODE_BUS_WIDTH_MASK);
+ if (word) {
+ mode_cfg |= SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD;
+ swap_cfg |= SPI_RX_SWAP_EN |
+ SPI_RX_BYTE_SWAP |
+ SPI_RX_HWORD_SWAP |
+ SPI_TX_SWAP_EN |
+ SPI_TX_BYTE_SWAP |
+ SPI_TX_HWORD_SWAP;
+ } else {
+ mode_cfg |= SPI_MODE_CH_WIDTH_BYTE | SPI_MODE_BUS_WIDTH_BYTE;
+ swap_cfg = 0;
+ }
+
+ if (mode_cfg != orig_mode_cfg)
+ writel(mode_cfg, &regs->mode_cfg);
+ if (swap_cfg != orig_swap_cfg)
+ writel(swap_cfg, &regs->swap_cfg);
+
+ clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+ setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ setbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+}
+
void spi_init(void)
{
- printk(BIOS_INFO, "Exynos SPI driver initiated.\n");
+}
+
+static void exynos_spi_init(struct exynos_spi *regs)
+{
+ // Set FB_CLK_SEL.
+ writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ // CPOL: Active high.
+ clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L);
+
+ // Clear rx and tx channel if set priveously.
+ clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
+
+ setbits_le32(&regs->swap_cfg,
+ SPI_RX_SWAP_EN | SPI_RX_BYTE_SWAP | SPI_RX_HWORD_SWAP);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_HS_EN);
+
+ // Do a soft reset, which will also enable both channels.
+ spi_sw_reset(regs, 1);
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
{
ASSERT(bus >= 0 && bus < 3);
- return &(exynos_spi_slaves[bus].slave);
+ struct exynos_spi_slave *eslave = &exynos_spi_slaves[bus];
+ if (!eslave->initialized) {
+ exynos_spi_init(eslave->regs);
+ eslave->initialized = 1;
+ }
+ return &eslave->slave;
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -103,237 +151,111 @@ void spi_cs_deactivate(struct spi_slave *slave)
setbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT);
}
-static inline void exynos_spi_soft_reset(struct exynos_spi *regs)
+int spi_claim_bus(struct spi_slave *slave)
{
- /* The soft reset clears only FIFO and status register.
- * All special function registers are not changed. */
- setbits_le32(&regs->ch_cfg, SPI_CH_RST);
- clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ spi_cs_activate(slave);
+ return 0;
}
-static inline void exynos_spi_flush_fifo(struct exynos_spi *regs)
+static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
+ u32 size)
{
- /*
- * Flush spi tx, rx fifos and reset the SPI controller
- * and clear rx/tx channel
- */
- clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
- clrbits_le32(&regs->ch_cfg, SPI_CH_HS_EN);
- exynos_spi_soft_reset(regs);
- setbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
-}
+ u8 *inb = in;
+ const u8 *outb = out;
-static void exynos_spi_request_bytes(struct exynos_spi *regs, int count,
- int width)
-{
- uint32_t mode_word = SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD,
- swap_word = (SPI_TX_SWAP_EN | SPI_RX_SWAP_EN |
- SPI_TX_BYTE_SWAP | SPI_RX_BYTE_SWAP |
- SPI_TX_HWORD_SWAP | SPI_RX_HWORD_SWAP);
-
- /* For word address we need to swap bytes */
- if (width == sizeof(uint32_t)) {
- setbits_le32(&regs->mode_cfg, mode_word);
- setbits_le32(&regs->swap_cfg, swap_word);
- count /= width;
- } else {
- /* Select byte access and clear the swap configuration */
- clrbits_le32(&regs->mode_cfg, mode_word);
- writel(0, &regs->swap_cfg);
- }
+ int width = (size % 4) ? 1 : 4;
- exynos_spi_soft_reset(regs);
+ while (size) {
+ int packets = size / width;
+ // The packet count field is 16 bits wide.
+ packets = MIN(packets, (1 << 16) - 1);
- if (count) {
- ASSERT(count < (1 << 16));
- writel(count | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
- } else {
- writel(0, &regs->pkt_cnt);
- }
-}
+ int out_bytes, in_bytes;
+ out_bytes = in_bytes = packets * width;
-static int spi_rx_tx(struct spi_slave *slave, uint8_t *rxp, int rx_bytes,
- const uint8_t *txp, int tx_bytes)
-{
- struct exynos_spi_slave *espi = to_exynos_spi(slave);
- struct exynos_spi *regs = espi->regs;
-
- int step;
- int todo = MAX(rx_bytes, tx_bytes);
- int wait_for_frame_header = espi->half_duplex;
-
- ASSERT(todo < EXYNOS_SPI_MAX_TRANSFER_BYTES);
-
- /* Select transfer mode. */
- if (espi->half_duplex) {
- step = 1;
- } else if ((rx_bytes | tx_bytes | (uintptr_t)rxp |(uintptr_t)txp) & 3) {
- printk(BIOS_CRIT, "%s: WARNING: transfer mode decreased to 1B\n",
- __func__);
- step = 1;
- } else {
- step = sizeof(uint32_t);
- }
+ spi_sw_reset(regs, width == 4);
+ writel(packets | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+
+ while (out_bytes || in_bytes) {
+ uint32_t spi_sts = readl(&regs->spi_sts);
+ int rx_lvl = ((spi_sts >> 15) & 0x1ff);
+ int tx_lvl = ((spi_sts >> 6) & 0x1ff);
- exynos_spi_request_bytes(regs, espi->half_duplex ? 0 : todo, step);
-
- /* Note: Some device, like ChromeOS EC, tries to work in half-duplex
- * mode and sends a large amount of data (larger than FIFO size).
- * Printing lots of debug messages or doing extra delay in the loop
- * below may cause rx buffer to overflow and getting unexpected data
- * error.
- */
- while (rx_bytes || tx_bytes) {
- int temp;
- uint32_t spi_sts = readl(&regs->spi_sts);
- int rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK,
- tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
- int min_tx = ((tx_bytes || !espi->half_duplex) ?
- (espi->fifo_size / 2) : 1);
-
- // TODO(hungte) Abort if timeout happens in half-duplex mode.
-
- /*
- * Don't completely fill the txfifo, since we don't want our
- * rxfifo to overflow, and it may already contain data.
- */
- while (tx_lvl < min_tx) {
- if (tx_bytes) {
- if (step == sizeof(uint32_t)) {
- temp = *((uint32_t *)txp);
- txp += sizeof(uint32_t);
- } else {
- temp = *txp++;
+ if (tx_lvl < 32 && tx_lvl < out_bytes) {
+ uint32_t data = 0xffffffff;
+
+ if (outb) {
+ memcpy(&data, outb, width);
+ outb += width;
}
- tx_bytes -= step;
- } else {
- temp = -1;
+ writel(data, &regs->tx_data);
+
+ out_bytes -= width;
}
- writel(temp, &regs->tx_data);
- tx_lvl += step;
- }
- while ((rx_lvl >= step) && rx_bytes) {
- temp = readl(&regs->rx_data);
- rx_lvl -= step;
- if (wait_for_frame_header) {
- if ((temp & 0xff) == espi->frame_header) {
- wait_for_frame_header = 0;
+ if (rx_lvl >= width) {
+ uint32_t data = readl(&regs->rx_data);
+
+ if (inb) {
+ memcpy(inb, &data, width);
+ inb += width;
}
- break; /* Restart the outer loop. */
- }
- if (step == sizeof(uint32_t)) {
- *((uint32_t *)rxp) = temp;
- rxp += sizeof(uint32_t);
- } else {
- *rxp++ = temp;
+
+ in_bytes -= width;
}
- rx_bytes -= step;
}
+
+ size -= packets * width;
}
- return 0;
}
-int spi_claim_bus(struct spi_slave *slave)
+int spi_xfer(struct spi_slave *slave, const void *dout, unsigned int bytes_out,
+ void *din, unsigned int bytes_in)
{
- struct exynos_spi_slave *espi = to_exynos_spi(slave);
- struct exynos_spi *regs = espi->regs;
+ struct exynos_spi *regs = to_exynos_spi(slave)->regs;
- exynos_spi_flush_fifo(regs);
+ if (bytes_out && bytes_in) {
+ u32 min_size = MIN(bytes_out, bytes_in);
- // Select Active High Clock, Format A (SCP 30.2.1.8).
- clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L | SPI_CH_CPHA_B);
+ spi_transfer(regs, din, dout, min_size);
- // Set FeedBack Clock Selection.
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ bytes_out -= min_size;
+ bytes_in -= min_size;
- // HIGH speed is required for Tx/Rx to work in 50MHz (SCP 30.2.1.6).
- if (espi->half_duplex) {
- clrbits_le32(&regs->ch_cfg, SPI_CH_HS_EN);
- printk(BIOS_DEBUG, "%s: LOW speed.\n", __func__);
- } else {
- setbits_le32(&regs->ch_cfg, SPI_CH_HS_EN);
- printk(BIOS_DEBUG, "%s: HIGH speed.\n", __func__);
+ din = (uint8_t *)din + min_size;
+ dout = (const uint8_t *)dout + min_size;
}
+
+ if (bytes_in)
+ spi_transfer(regs, din, NULL, bytes_in);
+ else if (bytes_out)
+ spi_transfer(regs, NULL, dout, bytes_out);
+
return 0;
}
-int spi_xfer(struct spi_slave *slave, const void *dout, unsigned int out_bytes,
- void *din, unsigned int in_bytes)
+void spi_release_bus(struct spi_slave *slave)
{
- uint8_t *out_ptr = (uint8_t *)dout, *in_ptr = (uint8_t *)din;
- int offset, todo, len;
- int ret = 0;
-
- len = MAX(out_bytes, in_bytes);
-
- /*
- * Exynos SPI limits each transfer to (2^16-1=65535) bytes. To keep
- * things simple (especially for word-width transfer mode), allow a
- * maximum of (2^16-4=65532) bytes. We could allow more in word mode,
- * but the performance difference is small.
- */
- spi_cs_activate(slave);
- for (offset = 0; !ret && (offset < len); offset += todo) {
- todo = min(len - offset, (1 << 16) - 4);
- ret = spi_rx_tx(slave, in_ptr, MIN(in_bytes, todo), out_ptr,
- MIN(out_bytes, todo));
- // Adjust remaining bytes and pointers.
- if (in_bytes >= todo) {
- in_bytes -= todo;
- in_ptr += todo;
- } else {
- in_bytes = 0;
- in_ptr = NULL;
- }
- if (out_bytes >= todo) {
- out_bytes -= todo;
- out_ptr += todo;
- } else {
- out_bytes = 0;
- out_ptr = NULL;
- }
- }
spi_cs_deactivate(slave);
-
- return ret;
}
static int exynos_spi_read(struct spi_slave *slave, void *dest, uint32_t len,
uint32_t off)
{
struct exynos_spi *regs = to_exynos_spi(slave)->regs;
- int rv;
+ u32 command;
+ spi_claim_bus(slave);
- // TODO(hungte) Merge the "read address" command into spi_xfer calls
- // (full-duplex mode).
-
- spi_cs_activate(slave);
-
- // Specify read address (in word-width mode).
+ // Send address.
ASSERT(off < (1 << 24));
- exynos_spi_request_bytes(regs, sizeof(off), sizeof(off));
- writel(htonl((SF_READ_DATA_CMD << 24) | off), &regs->tx_data);
- while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE)) {
- /* Wait for TX done */
- }
-
- // Now, safe to transfer.
- rv = spi_xfer(slave, NULL, 0, dest, len * 8);
- spi_cs_deactivate(slave);
+ command = htonl(SF_READ_DATA_CMD << 24 | off);
+ spi_transfer(regs, NULL, &command, sizeof(command));
- return (rv == 0) ? len : -1;
-}
+ // Read the data.
+ spi_transfer(regs, dest, NULL, len);
+ spi_release_bus(slave);
-void spi_release_bus(struct spi_slave *slave)
-{
- struct exynos_spi *regs = to_exynos_spi(slave)->regs;
- /* Reset swap mode to make sure no one relying on default values (Ex,
- * payload or kernel) will go wrong. */
- clrbits_le32(&regs->mode_cfg, (SPI_MODE_CH_WIDTH_WORD |
- SPI_MODE_BUS_WIDTH_WORD));
- writel(0, &regs->swap_cfg);
- exynos_spi_flush_fifo(regs);
+ return len;
}
// SPI as CBFS media.
diff --git a/src/soc/samsung/exynos5420/spi.h b/src/soc/samsung/exynos5420/spi.h
index 20c2adb087..78cca6f416 100644
--- a/src/soc/samsung/exynos5420/spi.h
+++ b/src/soc/samsung/exynos5420/spi.h
@@ -57,8 +57,12 @@ check_member(exynos_spi, fb_clk, 0x2c);
#define SPI_TX_CH_ON (1 << 0)
/* SPI_MODECFG */
-#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29)
+#define SPI_MODE_BUS_WIDTH_BYTE (0x0 << 17)
#define SPI_MODE_BUS_WIDTH_WORD (0x2 << 17)
+#define SPI_MODE_BUS_WIDTH_MASK (0x3 << 17)
+#define SPI_MODE_CH_WIDTH_BYTE (0x0 << 29)
+#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29)
+#define SPI_MODE_CH_WIDTH_MASK (0x3 << 29)
/* SPI_CSREG */
#define SPI_SLAVE_SIG_INACT (1 << 0)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 06:35:13 +0000