diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/qualcomm/ipq806x/Kconfig | 1 | ||||
| -rw-r--r-- | src/soc/qualcomm/ipq806x/include/iomap.h | 7 | ||||
| -rw-r--r-- | src/soc/qualcomm/ipq806x/include/spi.h | 90 | ||||
| -rw-r--r-- | src/soc/qualcomm/ipq806x/spi.c | 644 |
4 files changed, 255 insertions, 487 deletions
diff --git a/src/soc/qualcomm/ipq806x/Kconfig b/src/soc/qualcomm/ipq806x/Kconfig index 92ef3a1d10..09e1c1eae0 100644 --- a/src/soc/qualcomm/ipq806x/Kconfig +++ b/src/soc/qualcomm/ipq806x/Kconfig @@ -7,6 +7,7 @@ config SOC_QC_IPQ806X select ARM_LPAE select BOOTBLOCK_CONSOLE select HAVE_UART_SPECIAL + select SPI_ATOMIC_SEQUENCING if SOC_QC_IPQ806X diff --git a/src/soc/qualcomm/ipq806x/include/iomap.h b/src/soc/qualcomm/ipq806x/include/iomap.h index 8a4155ce6b..be523a65cd 100644 --- a/src/soc/qualcomm/ipq806x/include/iomap.h +++ b/src/soc/qualcomm/ipq806x/include/iomap.h @@ -36,6 +36,9 @@ #ifndef __SOC_QUALCOMM_IPQ806X_IOMAP_H_ #define __SOC_QUALCOMM_IPQ806X_IOMAP_H_ +#include <arch/io.h> +#include <cdp.h> + /* Typecast to allow integers being passed as address This needs to be included because vendor code is not compliant with our macros for read/write. Hence, special macros for readl_i and writel_i are @@ -43,8 +46,8 @@ */ #define readl_i(a) read32((const void *)(a)) #define writel_i(v,a) write32(v,(void *)a) -#include <arch/io.h> -#include <cdp.h> +#define clrsetbits_le32_i(addr, clear, set) \ + clrsetbits_le32(((void *)(addr)), (clear), (set)) #define MSM_CLK_CTL_BASE 0x00900000 diff --git a/src/soc/qualcomm/ipq806x/include/spi.h b/src/soc/qualcomm/ipq806x/include/spi.h index 2020043c6c..48073fadd0 100644 --- a/src/soc/qualcomm/ipq806x/include/spi.h +++ b/src/soc/qualcomm/ipq806x/include/spi.h @@ -3,8 +3,10 @@ * Copyright (c) 2012 The Linux Foundation. All rights reserved. */ -#ifndef _IPQ_SPI_H_ -#define _IPQ_SPI_H_ +#ifndef _IPQ806X_SPI_H_ +#define _IPQ806X_SPI_H_ + +#include <spi_flash.h> #define QUP5_BASE 0x1a280000 #define QUP6_BASE 0x16580000 @@ -70,6 +72,14 @@ #define GSBI6_QUP_STATE_REG (GSBI6_QUP6_REG_BASE + 0x00000004) #define GSBI7_QUP_STATE_REG (GSBI7_QUP7_REG_BASE + 0x00000004) +#define GSBI5_QUP_OUT_FIFO_WORD_CNT_REG (GSBI5_QUP5_REG_BASE + 0x0000010c) +#define GSBI6_QUP_OUT_FIFO_WORD_CNT_REG (GSBI6_QUP6_REG_BASE + 0x0000010c) +#define GSBI7_QUP_OUT_FIFO_WORD_CNT_REG (GSBI7_QUP7_REG_BASE + 0x0000010c) + +#define GSBI5_QUP_IN_FIFO_WORD_CNT_REG (GSBI5_QUP5_REG_BASE + 0x00000214) +#define GSBI6_QUP_IN_FIFO_WORD_CNT_REG (GSBI6_QUP6_REG_BASE + 0x00000214) +#define GSBI7_QUP_IN_FIFO_WORD_CNT_REG (GSBI7_QUP7_REG_BASE + 0x00000214) + #define GSBI5_QUP_INPUT_FIFOc_REG(c) \ (GSBI5_QUP5_REG_BASE + 0x00000218 + 4 * (c)) #define GSBI6_QUP_INPUT_FIFOc_REG(c) \ @@ -144,10 +154,14 @@ #define QUP_CONFIG_MINI_CORE_SPI (1 << 8) #define SPI_QUP_CONF_INPUT_MSK (1 << 7) #define SPI_QUP_CONF_INPUT_ENA (0 << 7) +#define SPI_QUP_CONF_NO_INPUT (1 << 7) #define SPI_QUP_CONF_OUTPUT_MSK (1 << 6) #define SPI_QUP_CONF_OUTPUT_ENA (0 << 6) -#define QUP_STATE_RUN_STATE 0x1 +#define SPI_QUP_CONF_NO_OUTPUT (1 << 6) +#define SPI_QUP_CONF_OUTPUT_ENA (0 << 6) #define QUP_STATE_RESET_STATE 0x0 +#define QUP_STATE_RUN_STATE 0x1 +#define QUP_STATE_PAUSE_STATE 0x3 #define SPI_BIT_WORD_MSK 0x1F #define SPI_8_BIT_WORD 0x07 #define PROTOCOL_CODE_MSK (0x07 << 4) @@ -196,6 +210,7 @@ #define OUTPUT_SERVICE_FLAG (1 << 8) #define INPUT_SERVICE_FLAG (1 << 9) #define QUP_OUTPUT_FIFO_FULL (1 << 6) +#define QUP_INPUT_FIFO_NOT_EMPTY (1 << 5) #define SPI_INPUT_BLOCK_SIZE 4 #define SPI_OUTPUT_BLOCK_SIZE 4 #define GSBI5_SPI_CLK 21 @@ -226,6 +241,7 @@ #define SPI_RESET_STATE 0 #define SPI_RUN_STATE 1 +#define SPI_PAUSE_STATE 3 #define SPI_CORE_RESET 0 #define SPI_CORE_RUNNING 1 #define GSBI_SPI_MODE_0 0 @@ -257,79 +273,13 @@ struct gsbi_spi { unsigned int qup_md_reg; }; -static const struct gsbi_spi spi_reg[] = { - /* GSBI5 registers for SPI interface */ - { - GSBI5_SPI_CONFIG_REG, - GSBI5_SPI_IO_CONTROL_REG, - GSBI5_SPI_ERROR_FLAGS_REG, - GSBI5_SPI_ERROR_FLAGS_EN_REG, - GSBI5_GSBI_CTRL_REG_REG, - GSBI5_QUP_CONFIG_REG, - GSBI5_QUP_ERROR_FLAGS_REG, - GSBI5_QUP_ERROR_FLAGS_EN_REG, - GSBI5_QUP_OPERATIONAL_REG, - GSBI5_QUP_IO_MODES_REG, - GSBI5_QUP_STATE_REG, - GSBI5_QUP_INPUT_FIFOc_REG(0), - GSBI5_QUP_OUTPUT_FIFOc_REG(0), - GSBI5_QUP_MX_INPUT_COUNT_REG, - GSBI5_QUP_MX_OUTPUT_COUNT_REG, - GSBI5_QUP_SW_RESET_REG, - GSBIn_QUP_APPS_NS_REG(5), - GSBIn_QUP_APPS_MD_REG(5) - }, - /* GSBI6 registers for SPI interface */ - { - GSBI6_SPI_CONFIG_REG, - GSBI6_SPI_IO_CONTROL_REG, - GSBI6_SPI_ERROR_FLAGS_REG, - GSBI6_SPI_ERROR_FLAGS_EN_REG, - GSBI6_GSBI_CTRL_REG_REG, - GSBI6_QUP_CONFIG_REG, - GSBI6_QUP_ERROR_FLAGS_REG, - GSBI6_QUP_ERROR_FLAGS_EN_REG, - GSBI6_QUP_OPERATIONAL_REG, - GSBI6_QUP_IO_MODES_REG, - GSBI6_QUP_STATE_REG, - GSBI6_QUP_INPUT_FIFOc_REG(0), - GSBI6_QUP_OUTPUT_FIFOc_REG(0), - GSBI6_QUP_MX_INPUT_COUNT_REG, - GSBI6_QUP_MX_OUTPUT_COUNT_REG, - GSBI6_QUP_SW_RESET_REG, - GSBIn_QUP_APPS_NS_REG(6), - GSBIn_QUP_APPS_MD_REG(6) - }, - /* GSBI7 registers for SPI interface */ - { - GSBI7_SPI_CONFIG_REG, - GSBI7_SPI_IO_CONTROL_REG, - GSBI7_SPI_ERROR_FLAGS_REG, - GSBI7_SPI_ERROR_FLAGS_EN_REG, - GSBI7_GSBI_CTRL_REG_REG, - GSBI7_QUP_CONFIG_REG, - GSBI7_QUP_ERROR_FLAGS_REG, - GSBI7_QUP_ERROR_FLAGS_EN_REG, - GSBI7_QUP_OPERATIONAL_REG, - GSBI7_QUP_IO_MODES_REG, - GSBI7_QUP_STATE_REG, - GSBI7_QUP_INPUT_FIFOc_REG(0), - GSBI7_QUP_OUTPUT_FIFOc_REG(0), - GSBI7_QUP_MX_INPUT_COUNT_REG, - GSBI7_QUP_MX_OUTPUT_COUNT_REG, - GSBI7_QUP_SW_RESET_REG, - GSBIn_QUP_APPS_NS_REG(7), - GSBIn_QUP_APPS_MD_REG(7) - } -}; - struct ipq_spi_slave { struct spi_slave slave; const struct gsbi_spi *regs; - unsigned int core_state; unsigned int mode; unsigned int initialized; unsigned long freq; + int allocated; }; static inline struct ipq_spi_slave *to_ipq_spi(struct spi_slave *slave) diff --git a/src/soc/qualcomm/ipq806x/spi.c b/src/soc/qualcomm/ipq806x/spi.c index 45ecc0e079..52d11c19c4 100644 --- a/src/soc/qualcomm/ipq806x/spi.c +++ b/src/soc/qualcomm/ipq806x/spi.c @@ -2,14 +2,13 @@ * Copyright (c) 2012 The Linux Foundation. All rights reserved. */ -#include <common.h> +#include <arch/io.h> +#include <delay.h> +#include <stdlib.h> +#include <string.h> #include <spi.h> -#include <malloc.h> -#include <asm/io.h> -#include <asm/errno.h> -#include "ipq_spi.h" -#include <asm/arch-ipq806x/gpio.h> -#include <asm/arch-ipq806x/iomap.h> +#include <gpio.h> +#include <iomap.h> #define SUCCESS 0 @@ -28,6 +27,11 @@ #define DRV_STR_IDX 4 #define GPIO_EN_IDX 5 +/* Arbitrarily assigned error code values */ +#define ETIMEDOUT -10 +#define EINVAL -11 +#define EIO -12 + #define GSBI_IDX_TO_GSBI(idx) (idx + 5) /* @@ -138,14 +142,14 @@ static unsigned int qup_apps_clk_state[NUM_PORTS] = { static int check_bit_state(uint32_t reg_addr, int bit_num, int val, int us_delay) { unsigned int count = TIMEOUT_CNT; - unsigned int bit_val = ((readl(reg_addr) >> bit_num) & 0x01); + unsigned int bit_val = ((readl_i(reg_addr) >> bit_num) & 0x01); while (bit_val != val) { count--; if (count == 0) return -ETIMEDOUT; udelay(us_delay); - bit_val = ((readl(reg_addr) >> bit_num) & 0x01); + bit_val = ((readl_i(reg_addr) >> bit_num) & 0x01); } return SUCCESS; @@ -168,7 +172,8 @@ static int check_qup_state_valid(struct ipq_spi_slave *ds) static int config_spi_state(struct ipq_spi_slave *ds, unsigned int state) { uint32_t val; - int ret = SUCCESS; + int ret; + uint32_t new_state; ret = check_qup_state_valid(ds); if (ret != SUCCESS) @@ -176,32 +181,28 @@ static int config_spi_state(struct ipq_spi_slave *ds, unsigned int state) switch (state) { case SPI_RUN_STATE: - /* Set the state to RUN */ - val = ((readl(ds->regs->qup_state) & ~QUP_STATE_MASK) - | QUP_STATE_RUN_STATE); - writel(val, ds->regs->qup_state); - ret = check_qup_state_valid(ds); - if (ret != SUCCESS) - return ret; - ds->core_state = SPI_CORE_RUNNING; + new_state = QUP_STATE_RUN_STATE; break; + case SPI_RESET_STATE: - /* Set the state to RESET */ - val = ((readl(ds->regs->qup_state) & ~QUP_STATE_MASK) - | QUP_STATE_RESET_STATE); - writel(val, ds->regs->qup_state); - ret = check_qup_state_valid(ds); - if (ret != SUCCESS) - return ret; - ds->core_state = SPI_CORE_RESET; + new_state = QUP_STATE_RESET_STATE; break; - default: - printf("err: unsupported GSBI SPI state : %d\n", state); - ret = -EINVAL; + + case SPI_PAUSE_STATE: + new_state = QUP_STATE_PAUSE_STATE; break; + + default: + printk(BIOS_ERR, + "err: unsupported GSBI SPI state : %d\n", state); + return -EINVAL; } - return ret; + /* Set the state as requested */ + val = (readl_i(ds->regs->qup_state) & ~QUP_STATE_MASK) + | new_state; + writel_i(val, ds->regs->qup_state); + return check_qup_state_valid(ds); } /* @@ -231,21 +232,22 @@ static void spi_set_mode(struct ipq_spi_slave *ds, unsigned int mode) input_first_mode = 0; break; default: - printf("err : unsupported spi mode : %d\n", mode); + printk(BIOS_ERR, + "err : unsupported spi mode : %d\n", mode); return; } - val = readl(ds->regs->spi_config); + val = readl_i(ds->regs->spi_config); val |= input_first_mode; - writel(val, ds->regs->spi_config); + writel_i(val, ds->regs->spi_config); - val = readl(ds->regs->io_control); + val = readl_i(ds->regs->io_control); if (clk_idle_state) val |= SPI_IO_CONTROL_CLOCK_IDLE_HIGH; else val &= ~SPI_IO_CONTROL_CLOCK_IDLE_HIGH; - writel(val, ds->regs->io_control); + writel_i(val, ds->regs->io_control); } /* @@ -253,9 +255,6 @@ static void spi_set_mode(struct ipq_spi_slave *ds, unsigned int mode) */ static int check_hclk_state(unsigned int core_num, int enable) { - if (clk_is_dummy()) - return 0; - return check_bit_state(CLK_HALT_CFPB_STATEB_REG, hclk_state[core_num], enable, 5); } @@ -265,9 +264,6 @@ static int check_hclk_state(unsigned int core_num, int enable) */ static int check_qup_clk_state(unsigned int core_num, int enable) { - if (clk_is_dummy()) - return 0; - return check_bit_state(CLK_HALT_CFPB_STATEB_REG, qup_apps_clk_state[core_num], enable, 5); } @@ -279,12 +275,12 @@ static void CS_change(int port_num, int cs_num, int enable) { unsigned int cs_gpio = cs_gpio_array[port_num][cs_num]; uint32_t addr = GPIO_IN_OUT_ADDR(cs_gpio); - uint32_t val = readl(addr); + uint32_t val = readl_i(addr); val &= (~(1 << GPIO_OUT)); if (!enable) val |= (1 << GPIO_OUT); - writel(val, addr); + writel_i(val, addr); } /* @@ -295,7 +291,7 @@ static void gsbi_pin_config(unsigned int port_num, int cs_num) unsigned int gpio; unsigned int i; /* Hold the GSBIn (core_num) core in reset */ - clrsetbits_le32(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(port_num)), + clrsetbits_le32_i(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(port_num)), GSBI1_RESET_MSK, GSBI1_RESET); /* @@ -336,76 +332,79 @@ static int gsbi_clock_init(struct ipq_spi_slave *ds) int ret; /* Hold the GSBIn (core_num) core in reset */ - clrsetbits_le32(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), + clrsetbits_le32_i(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), GSBI1_RESET_MSK, GSBI1_RESET); /* Disable GSBIn (core_num) QUP core clock branch */ - clrsetbits_le32(ds->regs->qup_ns_reg, QUP_CLK_BRANCH_ENA_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, QUP_CLK_BRANCH_ENA_MSK, QUP_CLK_BRANCH_DIS); ret = check_qup_clk_state(ds->slave.bus, 1); if (ret) { - printf("QUP Clock Halt For GSBI%d failed!\n", ds->slave.bus); + printk(BIOS_ERR, + "QUP Clock Halt For GSBI%d failed!\n", ds->slave.bus); return ret; } /* Disable M/N:D counter and hold M/N:D counter in reset */ - clrsetbits_le32(ds->regs->qup_ns_reg, (MNCNTR_MSK | MNCNTR_RST_MSK), + clrsetbits_le32_i(ds->regs->qup_ns_reg, (MNCNTR_MSK | MNCNTR_RST_MSK), (MNCNTR_RST_ENA | MNCNTR_DIS)); /* Disable GSBIn (core_num) QUP core clock root */ - clrsetbits_le32(ds->regs->qup_ns_reg, CLK_ROOT_ENA_MSK, CLK_ROOT_DIS); + clrsetbits_le32_i(ds->regs->qup_ns_reg, CLK_ROOT_ENA_MSK, CLK_ROOT_DIS); - clrsetbits_le32(ds->regs->qup_ns_reg, GSBIn_PLL_SRC_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, GSBIn_PLL_SRC_MSK, GSBIn_PLL_SRC_PLL8); - clrsetbits_le32(ds->regs->qup_ns_reg, GSBIn_PRE_DIV_SEL_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, GSBIn_PRE_DIV_SEL_MSK, (0 << GSBI_PRE_DIV_SEL_SHFT)); /* Program M/N:D values for GSBIn_QUP_APPS_CLK @50MHz */ - clrsetbits_le32(ds->regs->qup_md_reg, GSBIn_M_VAL_MSK, + clrsetbits_le32_i(ds->regs->qup_md_reg, GSBIn_M_VAL_MSK, (0x01 << GSBI_M_VAL_SHFT)); - clrsetbits_le32(ds->regs->qup_md_reg, GSBIn_D_VAL_MSK, + clrsetbits_le32_i(ds->regs->qup_md_reg, GSBIn_D_VAL_MSK, (0xF7 << GSBI_D_VAL_SHFT)); - clrsetbits_le32(ds->regs->qup_ns_reg, GSBIn_N_VAL_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, GSBIn_N_VAL_MSK, (0xF8 << GSBI_N_VAL_SHFT)); /* Set MNCNTR_MODE = 0: Bypass mode */ - clrsetbits_le32(ds->regs->qup_ns_reg, MNCNTR_MODE_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, MNCNTR_MODE_MSK, MNCNTR_MODE_DUAL_EDGE); /* De-assert the M/N:D counter reset */ - clrsetbits_le32(ds->regs->qup_ns_reg, MNCNTR_RST_MSK, MNCNTR_RST_DIS); - clrsetbits_le32(ds->regs->qup_ns_reg, MNCNTR_MSK, MNCNTR_EN); + clrsetbits_le32_i(ds->regs->qup_ns_reg, MNCNTR_RST_MSK, MNCNTR_RST_DIS); + clrsetbits_le32_i(ds->regs->qup_ns_reg, MNCNTR_MSK, MNCNTR_EN); /* * Enable the GSBIn (core_num) QUP core clock root. * Keep MND counter disabled */ - clrsetbits_le32(ds->regs->qup_ns_reg, CLK_ROOT_ENA_MSK, CLK_ROOT_ENA); + clrsetbits_le32_i(ds->regs->qup_ns_reg, CLK_ROOT_ENA_MSK, CLK_ROOT_ENA); /* Enable GSBIn (core_num) QUP core clock branch */ - clrsetbits_le32(ds->regs->qup_ns_reg, QUP_CLK_BRANCH_ENA_MSK, + clrsetbits_le32_i(ds->regs->qup_ns_reg, QUP_CLK_BRANCH_ENA_MSK, QUP_CLK_BRANCH_ENA); ret = check_qup_clk_state(ds->slave.bus, 0); if (ret) { - printf("QUP Clock Enable For GSBI%d" + printk(BIOS_ERR, + "QUP Clock Enable For GSBI%d" " failed!\n", ds->slave.bus); return ret; } /* Enable GSBIn (core_num) core clock branch */ - clrsetbits_le32(GSBIn_HCLK_CTL_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), + clrsetbits_le32_i(GSBIn_HCLK_CTL_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), GSBI_CLK_BRANCH_ENA_MSK, GSBI_CLK_BRANCH_ENA); ret = check_hclk_state(ds->slave.bus, 0); if (ret) { - printf("HCLK Enable For GSBI%d failed!\n", ds->slave.bus); + printk(BIOS_ERR, + "HCLK Enable For GSBI%d failed!\n", ds->slave.bus); return ret; } /* Release GSBIn (core_num) core from reset */ - clrsetbits_le32(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), + clrsetbits_le32_i(GSBIn_RESET_REG(GSBI_IDX_TO_GSBI(ds->slave.bus)), GSBI1_RESET_MSK, 0); udelay(50); @@ -417,26 +416,87 @@ static int gsbi_clock_init(struct ipq_spi_slave *ds) */ static void spi_reset(struct ipq_spi_slave *ds) { - writel(0x1, ds->regs->qup_sw_reset); + writel_i(0x1, ds->regs->qup_sw_reset); udelay(5); } +static const struct gsbi_spi spi_reg[] = { + /* GSBI5 registers for SPI interface */ + { + GSBI5_SPI_CONFIG_REG, + GSBI5_SPI_IO_CONTROL_REG, + GSBI5_SPI_ERROR_FLAGS_REG, + GSBI5_SPI_ERROR_FLAGS_EN_REG, + GSBI5_GSBI_CTRL_REG_REG, + GSBI5_QUP_CONFIG_REG, + GSBI5_QUP_ERROR_FLAGS_REG, + GSBI5_QUP_ERROR_FLAGS_EN_REG, + GSBI5_QUP_OPERATIONAL_REG, + GSBI5_QUP_IO_MODES_REG, + GSBI5_QUP_STATE_REG, + GSBI5_QUP_INPUT_FIFOc_REG(0), + GSBI5_QUP_OUTPUT_FIFOc_REG(0), + GSBI5_QUP_MX_INPUT_COUNT_REG, + GSBI5_QUP_MX_OUTPUT_COUNT_REG, + GSBI5_QUP_SW_RESET_REG, + GSBIn_QUP_APPS_NS_REG(5), + GSBIn_QUP_APPS_MD_REG(5), + }, + /* GSBI6 registers for SPI interface */ + { + GSBI6_SPI_CONFIG_REG, + GSBI6_SPI_IO_CONTROL_REG, + GSBI6_SPI_ERROR_FLAGS_REG, + GSBI6_SPI_ERROR_FLAGS_EN_REG, + GSBI6_GSBI_CTRL_REG_REG, + GSBI6_QUP_CONFIG_REG, + GSBI6_QUP_ERROR_FLAGS_REG, + GSBI6_QUP_ERROR_FLAGS_EN_REG, + GSBI6_QUP_OPERATIONAL_REG, + GSBI6_QUP_IO_MODES_REG, + GSBI6_QUP_STATE_REG, + GSBI6_QUP_INPUT_FIFOc_REG(0), + GSBI6_QUP_OUTPUT_FIFOc_REG(0), + GSBI6_QUP_MX_INPUT_COUNT_REG, + GSBI6_QUP_MX_OUTPUT_COUNT_REG, + GSBI6_QUP_SW_RESET_REG, + GSBIn_QUP_APPS_NS_REG(6), + GSBIn_QUP_APPS_MD_REG(6), + }, + /* GSBI7 registers for SPI interface */ + { + GSBI7_SPI_CONFIG_REG, + GSBI7_SPI_IO_CONTROL_REG, + GSBI7_SPI_ERROR_FLAGS_REG, + GSBI7_SPI_ERROR_FLAGS_EN_REG, + GSBI7_GSBI_CTRL_REG_REG, + GSBI7_QUP_CONFIG_REG, + GSBI7_QUP_ERROR_FLAGS_REG, + GSBI7_QUP_ERROR_FLAGS_EN_REG, + GSBI7_QUP_OPERATIONAL_REG, + GSBI7_QUP_IO_MODES_REG, + GSBI7_QUP_STATE_REG, + GSBI7_QUP_INPUT_FIFOc_REG(0), + GSBI7_QUP_OUTPUT_FIFOc_REG(0), + GSBI7_QUP_MX_INPUT_COUNT_REG, + GSBI7_QUP_MX_OUTPUT_COUNT_REG, + GSBI7_QUP_SW_RESET_REG, + GSBIn_QUP_APPS_NS_REG(7), + GSBIn_QUP_APPS_MD_REG(7), + } +}; +static struct ipq_spi_slave spi_slave_pool[2]; + void spi_init() { - /* do nothing */ - + /* just in case */ + memset(spi_slave_pool, 0, sizeof(spi_slave_pool)); } -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) { - struct ipq_spi_slave *ds; - - ds = malloc(sizeof(struct ipq_spi_slave)); - if (!ds) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } + struct ipq_spi_slave *ds = NULL; + int i; /* * IPQ GSBI (Generic Serial Bus Interface) supports SPI Flash @@ -447,44 +507,34 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, || ((bus == GSBI5_SPI) && (cs > 3)) || ((bus == GSBI6_SPI) && (cs > 0)) || ((bus == GSBI7_SPI) && (cs > 0))) { - printf("SPI error: unsupported bus %d " + printk(BIOS_ERR, "SPI error: unsupported bus %d " "(Supported busses 0,1 and 2) or chipselect\n", bus); - goto err; - } - ds->slave.bus = bus; - ds->slave.cs = cs; - - ds->regs = &spi_reg[bus]; - - /* TODO For different clock frequency */ - if (max_hz > MSM_GSBI_MAX_FREQ) { - printf("SPI error: unsupported frequency %d Hz " - "Max frequency is %d Hz\n", max_hz, MSM_GSBI_MAX_FREQ); - goto err; } - ds->freq = max_hz; - if (mode > GSBI_SPI_MODE_3) { - printf("SPI error: unsupported SPI mode %d\n", mode); - goto err; + for (i = 0; i < ARRAY_SIZE(spi_slave_pool); i++) { + if (spi_slave_pool[i].allocated) + continue; + ds = spi_slave_pool + i; + ds->slave.bus = bus; + ds->slave.cs = cs; + ds->regs = &spi_reg[bus]; + + /* + * TODO(vbendeb): + * hardcoded frequency and mode - we might need to find a way + * to configure this + */ + ds->freq = 10000000; + ds->mode = GSBI_SPI_MODE_0; + ds->allocated = 1; + + return &ds->slave; } - ds->mode = mode; - return &ds->slave; - -err: - free(ds); + printk(BIOS_ERR, "SPI error: all %d pools busy\n", i); return NULL; } -void spi_free_slave(struct spi_slave *slave) -{ - struct ipq_spi_slave *ds = to_ipq_spi(slave); - - if (ds != NULL) - free(ds); -} - /* * GSBIn SPI Hardware Initialisation */ @@ -492,7 +542,8 @@ static int spi_hw_init(struct ipq_spi_slave *ds) { int ret; - ds->initialized = 0; + if (ds->initialized) + return 0; /* GSBI module configuration */ spi_reset(ds); @@ -503,27 +554,27 @@ static int spi_hw_init(struct ipq_spi_slave *ds) return ret; /* Configure GSBI_CTRL register to set protocol_mode to SPI:011 */ - clrsetbits_le32(ds->regs->gsbi_ctrl, PROTOCOL_CODE_MSK, + clrsetbits_le32_i(ds->regs->gsbi_ctrl, PROTOCOL_CODE_MSK, PROTOCOL_CODE_SPI); /* * Configure Mini core to SPI core with Input Output enabled, * SPI master, N = 8 bits */ - clrsetbits_le32(ds->regs->qup_config, (QUP_CONFIG_MINI_CORE_MSK | + clrsetbits_le32_i(ds->regs->qup_config, (QUP_CONFIG_MINI_CORE_MSK | SPI_QUP_CONF_INPUT_MSK | SPI_QUP_CONF_OUTPUT_MSK | SPI_BIT_WORD_MSK), (QUP_CONFIG_MINI_CORE_SPI | - SPI_QUP_CONF_INPUT_ENA | - SPI_QUP_CONF_OUTPUT_ENA | + SPI_QUP_CONF_NO_INPUT | + SPI_QUP_CONF_NO_OUTPUT | SPI_8_BIT_WORD)); /* * Configure Input first SPI protocol, * SPI master mode and no loopback */ - clrsetbits_le32(ds->regs->spi_config, (LOOP_BACK_MSK | + clrsetbits_le32_i(ds->regs->spi_config, (LOOP_BACK_MSK | SLAVE_OPERATION_MSK), (NO_LOOP_BACK | SLAVE_OPERATION)); @@ -534,7 +585,7 @@ static int spi_hw_init(struct ipq_spi_slave *ds) * MX_CS_MODE = 0 * NO_TRI_STATE = 1 */ - writel((CLK_ALWAYS_ON | MX_CS_MODE | NO_TRI_STATE), + writel_i((CLK_ALWAYS_ON | MX_CS_MODE | NO_TRI_STATE), ds->regs->io_control); /* @@ -543,7 +594,7 @@ static int spi_hw_init(struct ipq_spi_slave *ds) * INPUT_MODE = Block Mode * OUTPUT MODE = Block Mode */ - clrsetbits_le32(ds->regs->qup_io_modes, (OUTPUT_BIT_SHIFT_MSK | + clrsetbits_le32_i(ds->regs->qup_io_modes, (OUTPUT_BIT_SHIFT_MSK | INPUT_BLOCK_MODE_MSK | OUTPUT_BLOCK_MODE_MSK), (OUTPUT_BIT_SHIFT_EN | @@ -553,8 +604,8 @@ static int spi_hw_init(struct ipq_spi_slave *ds) spi_set_mode(ds, ds->mode); /* Disable Error mask */ - writel(0, ds->regs->error_flags_en); - writel(0, ds->regs->qup_error_flags_en); + writel_i(0, ds->regs->error_flags_en); + writel_i(0, ds->regs->qup_error_flags_en); ds->initialized = 1; @@ -566,6 +617,9 @@ int spi_claim_bus(struct spi_slave *slave) struct ipq_spi_slave *ds = to_ipq_spi(slave); unsigned int ret; + if (ds->initialized) + return SUCCESS; + /* GPIO Configuration for SPI port */ gsbi_pin_config(ds->slave.bus, ds->slave.cs); @@ -590,276 +644,87 @@ void spi_release_bus(struct spi_slave *slave) ds->initialized = 0; } -/* Drain input fifo - * If input fifo is not empty drain the input FIFO. When the - * input fifo is drained make sure that the output fifo is also - * empty and break when the input fifo is completely drained. - */ -static void flush_fifos(struct ipq_spi_slave *ds) +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned out_bytes, void *din, unsigned in_bytes) { - unsigned int fifo_data; - - while (1) { - if (readl(ds->regs->qup_operational) & - QUP_DATA_AVAILABLE_FOR_READ) { - fifo_data = readl(ds->regs->qup_input_fifo); - } else { - if (!(readl(ds->regs->qup_operational) & - QUP_OUTPUT_FIFO_NOT_EMPTY)) { - if (!(readl(ds->regs->qup_operational) & - QUP_DATA_AVAILABLE_FOR_READ)) - break; - } - } - } + int ret; + uint8_t* dbuf; + const uint8_t* dobuf; + struct ipq_spi_slave *ds = to_ipq_spi(slave); - (void)fifo_data; -} + /* Assert the chip select */ + CS_change(ds->slave.bus, ds->slave.cs, CS_ASSERT); -/* - * Function to write data to OUTPUT FIFO - */ -static void spi_write_byte(struct ipq_spi_slave *ds, unsigned char data) -{ - /* Wait for space in the FIFO */ - while ((readl(ds->regs->qup_operational) & QUP_OUTPUT_FIFO_FULL)) - udelay(1); + ret = config_spi_state(ds, SPI_RESET_STATE); + if (ret) + goto out; - /* Write the byte of data */ - writel(data, ds->regs->qup_output_fifo); -} + if (!out_bytes) + goto spi_receive; -/* - * Function to read data from Input FIFO - */ -static unsigned char spi_read_byte(struct ipq_spi_slave *ds) -{ - /* Wait for Data in FIFO */ - while (!(readl(ds->regs->qup_operational) & - QUP_DATA_AVAILABLE_FOR_READ)) { - udelay(1); - } + /* + * Let's do the write side of the transaction first. Enable output + * FIFO. + */ + clrsetbits_le32_i(ds->regs->qup_config, SPI_QUP_CONF_OUTPUT_MSK, + SPI_QUP_CONF_OUTPUT_ENA); - /* Read a byte of data */ - return readl(ds->regs->qup_input_fifo) & 0xff; -} + writel_i(out_bytes, ds->regs->qup_mx_output_count); -/* - * Function to check wheather Input or Output FIFO - * has data to be serviced - */ -static int check_fifo_status(uint32_t reg_addr) -{ - unsigned int count = TIMEOUT_CNT; - unsigned int status_flag; - unsigned int val; + ret = config_spi_state(ds, SPI_RUN_STATE); + if (ret) + goto out; - do { - val = readl(reg_addr); - count--; - if (count == 0) - return -ETIMEDOUT; - status_flag = ((val & OUTPUT_SERVICE_FLAG) | (val & INPUT_SERVICE_FLAG)); - } while (!status_flag); + dobuf = dout; /* Alias to make it possible to use pointer autoinc. */ - return SUCCESS; -} + while (out_bytes) { + if (readl_i(ds->regs->qup_operational) & QUP_OUTPUT_FIFO_FULL) + continue; -/* - * Function to read bytes number of data from the Input FIFO - */ -static int gsbi_spi_read(struct ipq_spi_slave *ds, u8 *data_buffer, - unsigned int bytes, unsigned long flags) -{ - uint32_t val; - unsigned int i; - unsigned int read_bytes = bytes; - unsigned int fifo_count; - int ret = SUCCESS; - int state_config; - - if (flags & SPI_XFER_BEGIN) { - /* Assert chip select */ - CS_change(ds->slave.bus, ds->slave.cs, CS_ASSERT); - } - - /* Configure no of bytes to read */ - state_config = config_spi_state(ds, SPI_RESET_STATE); - if (state_config) - return state_config; - - writel(bytes, ds->regs->qup_mx_output_count); - writel(bytes, ds->regs->qup_mx_input_count); - - state_config = config_spi_state(ds, SPI_RUN_STATE); - if (state_config) - return state_config; - - while (read_bytes) { - - ret = check_fifo_status(ds->regs->qup_operational); - if (ret != SUCCESS) - goto out; - - val = readl(ds->regs->qup_operational); - if (val & INPUT_SERVICE_FLAG) { - /* - * acknowledge to hw that software will - * read input data - */ - val &= INPUT_SERVICE_FLAG; - writel(val, ds->regs->qup_operational); - - fifo_count = ((read_bytes > SPI_INPUT_BLOCK_SIZE) ? - SPI_INPUT_BLOCK_SIZE : read_bytes); - - for (i = 0; i < fifo_count; i++) { - *data_buffer = spi_read_byte(ds); - data_buffer++; - read_bytes--; - } - } + writel_i(*dobuf++, ds->regs->qup_output_fifo); + out_bytes--; - if (val & OUTPUT_SERVICE_FLAG) { - /* - * acknowledge to hw that software will - * write output data - */ - val &= OUTPUT_SERVICE_FLAG; - writel(val, ds->regs->qup_operational); - - fifo_count = ((read_bytes > SPI_OUTPUT_BLOCK_SIZE) ? - SPI_OUTPUT_BLOCK_SIZE : read_bytes); - - for (i = 0; i < fifo_count; i++) { - /* - * Write dummy data byte for the device - * to shift in actual data. Most of the SPI devices - * accepts dummy data value as 0. In case of any - * other value change DUMMY_DATA_VAL. - */ - spi_write_byte(ds, DUMMY_DATA_VAL); - } - } + /* Wait for output FIFO to drain. */ + if (!out_bytes) + while (readl_i(ds->regs->qup_operational) & + QUP_OUTPUT_FIFO_NOT_EMPTY) + ; } - if (flags & SPI_XFER_END) { - flush_fifos(ds); + ret = config_spi_state(ds, SPI_RESET_STATE); + if (ret) goto out; - } - return ret; - -out: - /* Deassert CS */ - CS_change(ds->slave.bus, ds->slave.cs, CS_DEASSERT); - - /* - * Put the SPI Core back in the Reset State - * to end the transfer - */ - (void)config_spi_state(ds, SPI_RESET_STATE); - - return ret; - -} - -/* - * Function to write data to the Output FIFO - */ -static int gsbi_spi_write(struct ipq_spi_slave *ds, const u8 *cmd_buffer, - unsigned int bytes, unsigned long flags) -{ - uint32_t val; - unsigned int i; - unsigned int write_len = bytes; - unsigned int read_len = bytes; - unsigned int fifo_count; - int ret = SUCCESS; - int state_config; - - if (flags & SPI_XFER_BEGIN) { - /* Select the chip select */ - CS_change(ds->slave.bus, ds->slave.cs, CS_ASSERT); - } +spi_receive: + if (!in_bytes) /* Nothing to read. */ + goto out; - state_config = config_spi_state(ds, SPI_RESET_STATE); - if (state_config) - return state_config; + /* Enable input FIFO */ + clrsetbits_le32_i(ds->regs->qup_config, SPI_QUP_CONF_INPUT_MSK, + SPI_QUP_CONF_INPUT_ENA); - /* No of bytes to be written in Output FIFO */ - writel(bytes, ds->regs->qup_mx_output_count); - writel(bytes, ds->regs->qup_mx_input_count); - state_config = config_spi_state(ds, SPI_RUN_STATE); - if (state_config) - return state_config; + writel_i(in_bytes, ds->regs->qup_mx_input_count); + writel_i(in_bytes, ds->regs->qup_mx_output_count); - /* - * read_len considered to ensure that we read the dummy data for the - * write we performed. This is needed to ensure with WR-RD transaction - * to get the actual data on the subsequent read cycle that happens - */ - while (write_len || read_len) { - - ret = check_fifo_status(ds->regs->qup_operational); - if (ret != SUCCESS) - goto out; - - val = readl(ds->regs->qup_operational); - if (val & OUTPUT_SERVICE_FLAG) { - /* - * acknowledge to hw that software will write - * expected output data - */ - val &= OUTPUT_SERVICE_FLAG; - writel(val, ds->regs->qup_operational); - - if (write_len > SPI_OUTPUT_BLOCK_SIZE) - fifo_count = SPI_OUTPUT_BLOCK_SIZE; - else - fifo_count = write_len; - - for (i = 0; i < fifo_count; i++) { - /* Write actual data to output FIFO */ - spi_write_byte(ds, *cmd_buffer); - cmd_buffer++; - write_len--; - } - } - if (val & INPUT_SERVICE_FLAG) { - /* - * acknowledge to hw that software - * will read input data - */ - val &= INPUT_SERVICE_FLAG; - writel(val, ds->regs->qup_operational); - - if (read_len > SPI_INPUT_BLOCK_SIZE) - fifo_count = SPI_INPUT_BLOCK_SIZE; - else - fifo_count = read_len; - - for (i = 0; i < fifo_count; i++) { - /* Read dummy data for the data written */ - (void)spi_read_byte(ds); - - /* Decrement the write count after reading the dummy data - * from the device. This is to make sure we read dummy data - * before we write the data to fifo - */ - read_len--; - } - } - } - - if (flags & SPI_XFER_END) { - flush_fifos(ds); + ret = config_spi_state(ds, SPI_RUN_STATE); + if (ret) goto out; - } - return ret; + /* Seed clocking */ + writel_i(0xff, ds->regs->qup_output_fifo); + dbuf = din; /* Alias for pointer autoincrement again. */ + while (in_bytes) { + if (!(readl_i(ds->regs->qup_operational) & + QUP_INPUT_FIFO_NOT_EMPTY)) + continue; + /* Keep it clocking */ + writel_i(0xff, ds->regs->qup_output_fifo); + + *dbuf++ = readl_i(ds->regs->qup_input_fifo) & 0xff; + in_bytes--; + } -out: + out: /* Deassert CS */ CS_change(ds->slave.bus, ds->slave.cs, CS_DEASSERT); @@ -871,54 +736,3 @@ out: return ret; } - -/* - * This function is invoked with either tx_buf or rx_buf. - * Calling this function with both null does a chip select change. - */ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct ipq_spi_slave *ds = to_ipq_spi(slave); - unsigned int len; - const u8 *txp = dout; - u8 *rxp = din; - int ret; - - if (bitlen & 0x07) { - printf("err : Invalid bit length"); - return -EINVAL; - } - - len = bitlen >> 3; - - if (dout != NULL) { - ret = gsbi_spi_write(ds, txp, len, flags); - if (ret != SUCCESS) - return ret; - } - - if (din != NULL) - return gsbi_spi_read(ds, rxp, len, flags); - - if ((din == NULL) && (dout == NULL)) - /* To handle only when chip select change is needed */ - ret = gsbi_spi_write(ds, NULL, 0, flags); - - return ret; -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - -} |