diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/rockchip/rk3399/sdram.c | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/src/soc/rockchip/rk3399/sdram.c b/src/soc/rockchip/rk3399/sdram.c index e51cd8968d..97346796fe 100644 --- a/src/soc/rockchip/rk3399/sdram.c +++ b/src/soc/rockchip/rk3399/sdram.c @@ -633,6 +633,7 @@ static int data_training(u32 channel, u32 i, tmp; u32 obs_0, obs_1, obs_2, obs_3, obs_err = 0; u32 rank = sdram_params->ch[channel].rank; + u32 reg_value = 0; /* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ setbits_le32(&denali_phy[927], (1 << 22)); @@ -741,6 +742,28 @@ static int data_training(u32 channel, /* read gate training(LPDDR4,LPDDR3,DDR3 support) */ if ((training_flag & PI_READ_GATE_TRAINING) == PI_READ_GATE_TRAINING) { + + /* + * The differential signal of DQS needs to keep low level + * before gate training. RPULL will connect 4Kn from PADP + * to VSS and a 4Kn from PADN to VDDQ to ensure it. + * But if it has PHY side ODT connect at this time, + * it will change the DQS signal level. So disable PHY + * side ODT before gate training and restore ODT state + * after gate training. + */ + if (sdram_params->dramtype != LPDDR4) { + reg_value = (read32(&denali_phy[6]) >> 24) & 0x7; + + /* + * phy_dqs_tsel_enable_X 3bits + * DENALI_PHY_6/134/262/390 offset_24 + */ + clrbits_le32(&denali_phy[6], 0x7 << 24); + clrbits_le32(&denali_phy[134], 0x7 << 24); + clrbits_le32(&denali_phy[262], 0x7 << 24); + clrbits_le32(&denali_phy[390], 0x7 << 24); + } for (i = 0; i < rank; i++) { select_per_cs_training_index(channel, i); /* PI_80 PI_RDLVL_GATE_EN:RW:24:2 */ @@ -784,6 +807,18 @@ static int data_training(u32 channel, write32((&denali_pi[175]), 0x00003f7c); } clrbits_le32(&denali_pi[80], 0x3 << 24); + + if (sdram_params->dramtype != LPDDR4) { + /* + * phy_dqs_tsel_enable_X 3bits + * DENALI_PHY_6/134/262/390 offset_24 + */ + tmp = reg_value << 24; + clrsetbits_le32(&denali_phy[6], 0x7 << 24, tmp); + clrsetbits_le32(&denali_phy[134], 0x7 << 24, tmp); + clrsetbits_le32(&denali_phy[262], 0x7 << 24, tmp); + clrsetbits_le32(&denali_phy[390], 0x7 << 24, tmp); + } } /* read leveling(LPDDR4,LPDDR3,DDR3 support) */ |