diff options
Diffstat (limited to 'src/southbridge/amd/rs690/gfx.c')
-rw-r--r-- | src/southbridge/amd/rs690/gfx.c | 625 |
1 files changed, 625 insertions, 0 deletions
diff --git a/src/southbridge/amd/rs690/gfx.c b/src/southbridge/amd/rs690/gfx.c new file mode 100644 index 0000000000..c55f2bc3d3 --- /dev/null +++ b/src/southbridge/amd/rs690/gfx.c @@ -0,0 +1,625 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * for rs690 internal graphics device + * device id of internal grphics: + * RS690M/T: 0x791f + * RS690: 0x791e + */ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <delay.h> +#include "rs690.h" + +#define CLK_CNTL_INDEX 0x8 +#define CLK_CNTL_DATA 0xC + +#ifdef UNUSED_CODE +static u32 clkind_read(device_t dev, u32 index) +{ + u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; + + *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index & 0x7F; + return *(u32*)(gfx_bar2+CLK_CNTL_DATA); +} +#endif + +static void clkind_write(device_t dev, u32 index, u32 data) +{ + u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; + /* printk(BIOS_INFO, "gfx bar 2 %02x\n", gfx_bar2); */ + + *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7; + *(u32*)(gfx_bar2+CLK_CNTL_DATA) = data; +} + +/* +* pci_dev_read_resources thinks it is a IO type. +* We have to force it to mem type. +*/ +static void rs690_gfx_read_resources(device_t dev) +{ + printk(BIOS_INFO, "rs690_gfx_read_resources.\n"); + + /* The initial value of 0x24 is 0xFFFFFFFF, which is confusing. + Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000, + which tells us it is a memory address base. + */ + pci_write_config32(dev, 0x24, 0x00000000); + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); + compact_resources(dev); +} + +static void internal_gfx_pci_dev_init(struct device *dev) +{ + u16 deviceid, vendorid; + deviceid = pci_read_config16(dev, PCI_DEVICE_ID); + vendorid = pci_read_config16(dev, PCI_VENDOR_ID); + printk(BIOS_INFO, "internal_gfx_pci_dev_init device=%x, vendor=%x.\n", + deviceid, vendorid); + + pci_dev_init(dev); + + /* clk ind */ + clkind_write(dev, 0x08, 0x01); + clkind_write(dev, 0x0C, 0x22); + clkind_write(dev, 0x0F, 0x0); + clkind_write(dev, 0x11, 0x0); + clkind_write(dev, 0x12, 0x0); + clkind_write(dev, 0x14, 0x0); + clkind_write(dev, 0x15, 0x0); + clkind_write(dev, 0x16, 0x0); + clkind_write(dev, 0x17, 0x0); + clkind_write(dev, 0x18, 0x0); + clkind_write(dev, 0x19, 0x0); + clkind_write(dev, 0x1A, 0x0); + clkind_write(dev, 0x1B, 0x0); + clkind_write(dev, 0x1C, 0x0); + clkind_write(dev, 0x1D, 0x0); + clkind_write(dev, 0x1E, 0x0); + clkind_write(dev, 0x26, 0x0); + clkind_write(dev, 0x27, 0x0); + clkind_write(dev, 0x28, 0x0); + clkind_write(dev, 0x5C, 0x0); +} + + +/* +* Set registers in RS690 and CPU to enable the internal GFX. +* Please refer to CIM source code and BKDG. +*/ +static void rs690_internal_gfx_enable(device_t dev) +{ + u32 l_dword; + int i; + device_t k8_f0 = 0, k8_f2 = 0; + device_t nb_dev = dev_find_slot(0, 0); + + printk(BIOS_INFO, "rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, + nb_dev); + + /* set APERTURE_SIZE, 128M. */ + l_dword = pci_read_config32(nb_dev, 0x8c); + printk(BIOS_INFO, "nb_dev, 0x8c=0x%x\n", l_dword); + l_dword &= 0xffffff8f; + pci_write_config32(nb_dev, 0x8c, l_dword); + + /* set TOM */ + rs690_set_tom(nb_dev); + + /* LPC DMA Deadlock workaround? */ + k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + l_dword = pci_read_config32(k8_f0, 0x68); + l_dword &= ~(1 << 22); + l_dword |= (1 << 21); + pci_write_config32(k8_f0, 0x68, l_dword); + + /* Enable 64bit mode. */ + set_nbmc_enable_bits(nb_dev, 0x5f, 0, 1 << 9); + set_nbmc_enable_bits(nb_dev, 0xb0, 0, 1 << 8); + + /* 64bit Latency. */ + set_nbmc_enable_bits(nb_dev, 0x5f, 0x7c00, 0x800); + + /* UMA dual channel control register. */ + nbmc_write_index(nb_dev, 0x86, 0x3d); + + /* check the setting later!! */ + set_htiu_enable_bits(nb_dev, 0x07, 1 << 7, 0); + + /* UMA mode, powerdown memory PLL. */ + set_nbmc_enable_bits(nb_dev, 0x74, 0, 1 << 31); + + /* Copy CPU DDR Controller to NB MC. */ + /* Why K8_MC_REG80 is special? */ + k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2)); + for (i = 0; i <= (0x80 - 0x40) / 4; i++) { + l_dword = pci_read_config32(k8_f2, 0x40 + i * 4); + nbmc_write_index(nb_dev, 0x63 + i, l_dword); + } + + /* Set K8 MC for UMA, Family F. */ + l_dword = pci_read_config32(k8_f2, 0xa0); + l_dword |= 0x2c; + pci_write_config32(k8_f2, 0xa0, l_dword); + l_dword = pci_read_config32(k8_f2, 0x94); + l_dword &= 0xf0ffffff; + l_dword |= 0x07000000; + pci_write_config32(k8_f2, 0x94, l_dword); + + /* set FB size and location. */ + nbmc_write_index(nb_dev, 0x1b, 0x00); + l_dword = nbmc_read_index(nb_dev, 0x1c); + l_dword &= 0xffff0; + l_dword |= 0x400 << 20; + l_dword |= 0x4; + nbmc_write_index(nb_dev, 0x1c, l_dword); + l_dword = nbmc_read_index(nb_dev, 0x1d); + l_dword &= 0xfffff000; + l_dword |= 0x0400; + nbmc_write_index(nb_dev, 0x1d, l_dword); + nbmc_write_index(nb_dev, 0x100, 0x3fff3800); + + /* Program MC table. */ + set_nbmc_enable_bits(nb_dev, 0x00, 0, 1 << 31); + l_dword = nbmc_read_index(nb_dev, 0x91); + l_dword |= 0x5; + nbmc_write_index(nb_dev, 0x91, l_dword); + set_nbmc_enable_bits(nb_dev, 0xb1, 0, 1 << 6); + set_nbmc_enable_bits(nb_dev, 0xc3, 0, 1); + + /* TODO: the optimization of voltage and frequency */ +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations pcie_ops = { + .read_resources = rs690_gfx_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = internal_gfx_pci_dev_init, /* The option ROM initializes the device. rs690_gfx_init, */ + .scan_bus = 0, + .enable = rs690_internal_gfx_enable, + .ops_pci = &lops_pci, +}; + +/* + * The dev id of 690G is 791E, while the id of 690M, 690T is 791F. + * We should list both of them here. + * */ +static const struct pci_driver pcie_driver_690t __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS690MT_INT_GFX, +}; + +static const struct pci_driver pcie_driver_690 __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS690_INT_GFX, +}; + +/* step 12 ~ step 14 from rpr */ +static void single_port_configuration(device_t nb_dev, device_t dev) +{ + u8 result, width; + u32 reg32; + struct southbridge_amd_rs690_config *cfg = + (struct southbridge_amd_rs690_config *)nb_dev->chip_info; + + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration.\n"); + + /* step 12 training, releases hold training for GFX port 0 (device 2) */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0<<4); + PcieReleasePortTraining(nb_dev, dev, 2); + result = PcieTrainPort(nb_dev, dev, 2); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step12.\n"); + + /* step 13 Power Down Control */ + /* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0); + + /* step 13.a Link Training was NOT successful */ + if (!result) { + set_nbmisc_enable_bits(nb_dev, 0x8, 0, 0x3 << 4); /* prevent from training. */ + set_nbmisc_enable_bits(nb_dev, 0xc, 0, 0x3 << 2); /* hide the GFX bridge. */ + if (cfg->gfx_tmds) + nbpcie_ind_write_index(nb_dev, 0x65, 0xccf0f0); + else { + nbpcie_ind_write_index(nb_dev, 0x65, 0xffffffff); + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 3, 1 << 3); + } + } else { /* step 13.b Link Training was successful */ + + reg32 = nbpcie_p_read_index(dev, 0xa2); + width = (reg32 >> 4) & 0x7; + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); + switch (width) { + case 1: + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x7f7f : 0xccfefe); + break; + case 4: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x3f3f : 0xccfcfc); + break; + case 8: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0f0f : 0xccf0f0); + break; + } + } + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step13.\n"); + + /* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */ + set_pcie_enable_bits(dev, 0x70, 1 << 19, 0 << 19); + printk(BIOS_INFO, "rs690_gfx_init single_port_configuration step14.\n"); +} + +/* step 15 ~ step 18 from rpr */ +static void dual_port_configuration(device_t nb_dev, device_t dev) +{ + u8 result, width; + u32 reg32; + struct southbridge_amd_rs690_config *cfg = + (struct southbridge_amd_rs690_config *)nb_dev->chip_info; + + /* step 15: Training for Device 2 */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4); + /* Releases hold training for GFX port 0 (device 2) */ + PcieReleasePortTraining(nb_dev, dev, 2); + /* PCIE Link Training Sequence */ + result = PcieTrainPort(nb_dev, dev, 2); + + /* step 16: Power Down Control for Device 2 */ + /* step 16.a Link Training was NOT successful */ + if (!result) { + /* Powers down all lanes for port A */ + nbpcie_ind_write_index(nb_dev, 0x65, 0x0f0f); + } else { /* step 16.b Link Training was successful */ + + reg32 = nbpcie_p_read_index(dev, 0xa2); + width = (reg32 >> 4) & 0x7; + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); + switch (width) { + case 1: + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0707 : 0x0e0e); + break; + case 4: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0303 : 0x0c0c); + break; + } + } + + /* step 17: Training for Device 3 */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 5, 0 << 5); + /* Releases hold training for GFX port 0 (device 3) */ + PcieReleasePortTraining(nb_dev, dev, 3); + /* PCIE Link Training Sequence */ + result = PcieTrainPort(nb_dev, dev, 3); + + /*step 18: Power Down Control for Device 3 */ + /* step 18.a Link Training was NOT successful */ + if (!result) { + /* Powers down all lanes for port B and PLL1 */ + nbpcie_ind_write_index(nb_dev, 0x65, 0xccf0f0); + } else { /* step 18.b Link Training was successful */ + + reg32 = nbpcie_p_read_index(dev, 0xa2); + width = (reg32 >> 4) & 0x7; + printk(BIOS_DEBUG, "GFX LC_LINK_WIDTH = 0x%x.\n", width); + switch (width) { + case 1: + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x7070 : 0xe0e0); + break; + case 4: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x3030 : 0xc0c0); + break; + } + } +} + + +/* For single port GFX configuration Only +* width: +* 000 = x16 +* 001 = x1 +* 010 = x2 +* 011 = x4 +* 100 = x8 +* 101 = x12 (not supported) +* 110 = x16 +*/ +static void dynamic_link_width_control(device_t nb_dev, device_t dev, u8 width) +{ + u32 reg32; + device_t sb_dev; + struct southbridge_amd_rs690_config *cfg = + (struct southbridge_amd_rs690_config *)nb_dev->chip_info; + + /* step 5.9.1.1 */ + reg32 = nbpcie_p_read_index(dev, 0xa2); + + /* step 5.9.1.2 */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0); + /* step 5.9.1.3 */ + set_pcie_enable_bits(dev, 0xa2, 3 << 0, width << 0); + /* step 5.9.1.4 */ + set_pcie_enable_bits(dev, 0xa2, 1 << 8, 1 << 8); + /* step 5.9.2.4 */ + if (0 == cfg->gfx_reconfiguration) + set_pcie_enable_bits(dev, 0xa2, 1 << 11, 1 << 11); + + /* step 5.9.1.5 */ + do { + reg32 = nbpcie_p_read_index(dev, 0xa2); + } + while (reg32 & 0x100); + + /* step 5.9.1.6 */ + sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); + do { + reg32 = pci_ext_read_config32(nb_dev, sb_dev, + PCIE_VC0_RESOURCE_STATUS); + } while (reg32 & VC_NEGOTIATION_PENDING); + + /* step 5.9.1.7 */ + reg32 = nbpcie_p_read_index(dev, 0xa2); + if (((reg32 & 0x70) >> 4) != 0x6) { + /* the unused lanes should be powered off. */ + } + + /* step 5.9.1.8 */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 0 << 0); +} + +/* +* GFX Core initialization, dev2, dev3 +*/ +void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) +{ + u16 reg16; + struct southbridge_amd_rs690_config *cfg = + (struct southbridge_amd_rs690_config *)nb_dev->chip_info; + + printk(BIOS_INFO, "rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", + nb_dev, dev, port); + + /* step 0, REFCLK_SEL, skip A11 revision */ + set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 9, + cfg->gfx_dev2_dev3 ? 1 << 9 : 0 << 9); + printk(BIOS_INFO, "rs690_gfx_init step0.\n"); + + /* step 1, lane reversal (only need if CMOS option is enabled) */ + if (cfg->gfx_lane_reversal) { + set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1 << 2); + if (cfg->gfx_dual_slot) + set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3); + } + printk(BIOS_INFO, "rs690_gfx_init step1.\n"); + + /* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */ + /* AMD calls the configuration CrossFire */ + if (cfg->gfx_dual_slot) + set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8); + printk(BIOS_INFO, "rs690_gfx_init step2.\n"); + + /* step 2, TMDS, (only need if CMOS option is enabled) */ + if (cfg->gfx_tmds) { + } + + /* step 3, GFX overclocking, (only need if CMOS option is enabled) */ + /* skip */ + + /* step 4, reset the GFX link */ + /* step 4.1 asserts both calibration reset and global reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 0x3 << 14, 0x3 << 14); + + /* step 4.2 de-asserts calibration reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 14, 0 << 14); + + /* step 4.3 wait for at least 200us */ + udelay(200); + + /* step 4.4 de-asserts global reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 15, 0 << 15); + + /* step 4.5 asserts both calibration reset and global reset */ + /* a weird step in RPR, don't do that */ + /* set_nbmisc_enable_bits(nb_dev, 0x8, 0x3 << 14, 0x3 << 14); */ + + /* step 4.6 bring external GFX device out of reset, wait for 1ms */ + mdelay(1); + printk(BIOS_INFO, "rs690_gfx_init step4.\n"); + + /* step 5 program PCIE memory mapped configuration space */ + /* done by enable_pci_bar3() before */ + + /* step 6 SBIOS compile flags */ + if (cfg->gfx_tmds) { + /* step 6.2.2 Clock-Muxing Control */ + /* step 6.2.2.1 */ + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 16, 1 << 16); + + /* step 6.2.2.2 */ + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 8, 1 << 8); + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 10, 1 << 10); + + /* step 6.2.2.3 */ + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 26, 1 << 26); + + /* step 6.2.3 Lane-Muxing Control */ + /* step 6.2.3.1 */ + set_nbmisc_enable_bits(nb_dev, 0x37, 0x3 << 8, 0x2 << 8); + + /* step 6.2.4 Received Data Control */ + /* step 6.2.4.1 */ + set_pcie_enable_bits(nb_dev, 0x40, 0x3 << 16, 0x2 << 16); + + /* step 6.2.4.2 */ + set_pcie_enable_bits(nb_dev, 0x40, 0x3 << 18, 0x3 << 18); + + /* step 6.2.4.3 */ + set_pcie_enable_bits(nb_dev, 0x40, 0x3 << 20, 0x0 << 20); + + /* step 6.2.4.4 */ + set_pcie_enable_bits(nb_dev, 0x40, 0x3 << 22, 0x1 << 22); + + /* step 6.2.5 PLL Power Down Control */ + /* step 6.2.5.1 */ + set_nbmisc_enable_bits(nb_dev, 0x35, 0x3 << 6, 0x0 << 6); + + /* step 6.2.6 Driving Strength Control */ + /* step 6.2.6.1 */ + set_nbmisc_enable_bits(nb_dev, 0x34, 0x1 << 24, 0x0 << 24); + + /* step 6.2.6.2 */ + set_nbmisc_enable_bits(nb_dev, 0x35, 0x3 << 2, 0x3 << 2); + } + + printk(BIOS_INFO, "rs690_gfx_init step6.\n"); + + /* step 7 compliance state, (only need if CMOS option is enabled) */ + /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */ + if (cfg->gfx_compliance) { + /* force compliance */ + set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6); + /* release hold training for device 2. GFX initialization is done. */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4); + dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width); + printk(BIOS_INFO, "rs690_gfx_init step7.\n"); + return; + } + + /* step 8 common initialization */ + /* step 8.1 sets RCB timeout to be 25ms */ + set_pcie_enable_bits(dev, 0x70, 7 << 16, 3 << 16); + printk(BIOS_INFO, "rs690_gfx_init step8.1.\n"); + + /* step 8.2 disables slave ordering logic */ + set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8); + printk(BIOS_INFO, "rs690_gfx_init step8.2.\n"); + + /* step 8.3 sets DMA payload size to 64 bytes */ + set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10); + printk(BIOS_INFO, "rs690_gfx_init step8.3.\n"); + + /* step 8.4 if the LTSSM could not see all 8 TS1 during Polling Active, it can still + * time out and go back to Detect Idle.*/ + set_pcie_enable_bits(dev, 0x02, 1 << 14, 1 << 14); + printk(BIOS_INFO, "rs690_gfx_init step8.4.\n"); + + /* step 8.5 shortens the enumeration timer */ + set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19); + printk(BIOS_INFO, "rs690_gfx_init step8.5.\n"); + + /* step 8.6 blocks DMA traffic during C3 state */ + set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0); + printk(BIOS_INFO, "rs690_gfx_init step8.6.\n"); + + /* step 8.7 Do not gate the electrical idle form the PHY + * step 8.8 Enables the escape from L1L23 */ + set_pcie_enable_bits(dev, 0xa0, 3 << 30, 3 << 30); + printk(BIOS_INFO, "rs690_gfx_init step8.8.\n"); + + /* step 8.9 Setting this register to 0x1 will workaround a PCI Compliance failure reported by Vista DTM. + * SLOT_IMPLEMENTED@PCIE_CAP */ + reg16 = pci_read_config16(dev, 0x5a); + reg16 |= 0x100; + pci_write_config16(dev, 0x5a, reg16); + printk(BIOS_INFO, "rs690_gfx_init step8.9.\n"); + + /* step 8.10 Setting this register to 0x1 will hide the Advanced Error Rporting Capabilities in the PCIE Brider. + * This will workaround several failures reported by the PCI Compliance test under Vista DTM. */ + set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 31, 0 << 31); + printk(BIOS_INFO, "rs690_gfx_init step8.10.\n"); + + /* step 8.11 Sets REGS_DLP_IGNORE_IN_L1_EN to ignore DLLPs during L1 so that txclk can be turned off. */ + set_pcie_enable_bits(nb_dev, 0x02, 1 << 0, 1 << 0); + printk(BIOS_INFO, "rs690_gfx_init step8.11.\n"); + + /* step 8.12 Sets REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent lc to go to from L0 to Rcv_L0s if L1 is armed. */ + set_pcie_enable_bits(nb_dev, 0x02, 1 << 6, 1 << 6); + printk(BIOS_INFO, "rs690_gfx_init step8.12.\n"); + + /* step 8.13 Sets CMGOOD_OVERRIDE. */ + set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17); + printk(BIOS_INFO, "rs690_gfx_init step8.13.\n"); + + /* step 9 Enable TLP Flushing, for non-AMD GFX devices and Hot-Plug devices only. */ + /* skip */ + + /* step 10 Optional Features, only needed if CMOS option is enabled. */ + /* step 10.a: L0s */ + /* enabling L0s in the RS690 GFX port(s) */ + set_pcie_enable_bits(nb_dev, 0xF9, 3 << 13, 2 << 13); + set_pcie_enable_bits(dev, 0xA0, 0xf << 8, 8 << 8); + reg16 = pci_read_config16(dev, 0x68); + reg16 |= 1 << 0; + /* L0s is intended as a power saving state */ + /* pci_write_config16(dev, 0x68, reg16); */ + + /* enabling L0s in the External GFX Device(s) */ + + /* step 10.b: active state power management (ASPM L1) */ + /* TO DO */ + + /* step 10.c: turning off PLL During L1/L23 */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 3, 1 << 3); + set_pcie_enable_bits(nb_dev, 0x40, 1 << 9, 1 << 9); + + /* step 10.d: TXCLK clock gating */ + set_nbmisc_enable_bits(nb_dev, 0x7, 3, 3); + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 22, 1 << 22); + set_pcie_enable_bits(nb_dev, 0x11, 0xf << 4, 0xc << 4); + + /* step 10.e: LCLK clock gating, done in rs690_config_misc_clk() */ + + /* step 11 Poll GPIO to determine whether it is single-port or dual-port configuration. + * While details will be added later in the document, for now assue the single-port configuration. */ + /* skip */ + + /* Single-port/Dual-port configureation. */ + switch (cfg->gfx_dual_slot) { + case 0: + single_port_configuration(nb_dev, dev); + break; + case 1: + dual_port_configuration(nb_dev, dev); + break; + default: + printk(BIOS_INFO, "Incorrect configuration of external gfx slot.\n"); + break; + } +} |