summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb700/sata.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd/sb700/sata.c')
-rw-r--r--src/southbridge/amd/sb700/sata.c555
1 files changed, 0 insertions, 555 deletions
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
deleted file mode 100644
index 292a7f2c9e..0000000000
--- a/src/southbridge/amd/sb700/sata.c
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <delay.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <option.h>
-#include <types.h>
-
-#include "sb700.h"
-
-static int sata_drive_detect(int portnum, uint16_t iobar)
-{
- u8 byte, byte2;
- u8 byte_prev, byte2_prev;
- int i = 0;
- byte_prev = byte2_prev = 0;
- outb(0xa0 + 0x10 * (portnum % 2), iobar + 0x6);
- while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
- (byte != (0xa0 + 0x10 * (portnum % 2))) ||
- ((byte2 & 0x88) != 0)) {
- if ((byte != byte_prev) || (byte2 != byte2_prev))
- printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2);
- if (byte != (0xa0 + 0x10 * (portnum % 2))) {
- /* This will happen at the first iteration of this loop
- * if the first SATA port is unpopulated and the
- * second SATA port is populated.
- */
- printk(BIOS_DEBUG, "drive no longer selected after %i ms, "
- "retrying init\n", i * 10);
- return 1;
- } else {
- if (i == 0)
- printk(BIOS_SPEW, "drive detection not yet completed, "
- "waiting...\n");
- }
- mdelay(10);
- i++;
- byte_prev = byte;
- byte2_prev = byte2;
-
- /* Detect stuck SATA controller and attempt reset */
- if (i > 1024) {
- printk(BIOS_DEBUG, "drive detection not done after %i ms, "
- "resetting HBA and retrying init\n", i * 10);
- return 2;
- }
- }
- printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10);
- return 0;
-}
-
-/* This function can be overloaded in mainboard.c */
-void __weak sb7xx_51xx_setup_sata_phys(struct device *dev)
-{
- /* RPR7.6.1 Program the PHY Global Control to 0x2C00 */
- pci_write_config16(dev, 0x86, 0x2c00);
-
- /* RPR7.6.2 SATA GENI PHY ports setting */
- pci_write_config32(dev, 0x88, 0x01B48017);
- pci_write_config32(dev, 0x8c, 0x01B48019);
- pci_write_config32(dev, 0x90, 0x01B48016);
- pci_write_config32(dev, 0x94, 0x01B48016);
- pci_write_config32(dev, 0x98, 0x01B48016);
- pci_write_config32(dev, 0x9c, 0x01B48016);
-
- /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */
- pci_write_config16(dev, 0xa0, 0xA09A);
- pci_write_config16(dev, 0xa2, 0xA09F);
- pci_write_config16(dev, 0xa4, 0xA07A);
- pci_write_config16(dev, 0xa6, 0xA07A);
- pci_write_config16(dev, 0xa8, 0xA07A);
- pci_write_config16(dev, 0xaa, 0xA07A);
-}
-
-/* This function can be overloaded in mainboard.c */
-void __weak sb7xx_51xx_setup_sata_port_indication(void *sata_bar5)
-{
- uint32_t dword;
-
- /* RPR7.9 Program Port Indication Registers */
- dword = read32(sata_bar5 + 0xf8);
- dword &= ~(0x3f << 12); /* Ports 0 and 1 are eSATA */
- dword |= (0x3 << 12);
- dword &= ~0x3f;
- write32(sata_bar5 + 0xf8, dword);
-
- dword = read32(sata_bar5 + 0xfc);
- dword |= 0x1 << 20; /* At least one eSATA port is present */
- write32(sata_bar5 + 0xfc, dword);
-}
-
-static void sata_init(struct device *dev)
-{
- u8 byte;
- u16 word;
- u32 dword;
- u8 rev_id;
- void *sata_bar5;
- uint16_t sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
- uint16_t ide_bar0, ide_bar1, ide_bar2, ide_bar3;
- uint16_t current_bar;
- int i, j, ret;
- uint8_t nvram;
- uint8_t sata_ahci_mode;
- uint8_t sata_alpm_enable;
- uint8_t port_count;
- uint8_t max_port_count;
- uint8_t ide_io_enabled;
- uint8_t ide_legacy_io_enabled;
-
- sata_ahci_mode = 0;
- if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS)
- sata_ahci_mode = !!nvram;
-
- sata_alpm_enable = 0;
- if (get_option(&nvram, "sata_alpm") == CB_SUCCESS)
- sata_alpm_enable = !!nvram;
-
- struct device *sm_dev;
- /* SATA SMBus Disable */
- sm_dev = pcidev_on_root(0x14, 0);
-
- /* WARNING
- * Enabling the SATA link latency enhancement (SMBUS 0xAD bit 5)
- * causes random persistent drive detection failures until it is cleared,
- * with the probabability of detection failure rising exponentially with
- * the number of drives attached to the controller!
- * This happens on Rev15 H/W.
- * Do NOT follow the RPR advice; leave this bit set at all times...
- */
- byte = pci_read_config8(sm_dev, 0xad);
- /* Disable SATA SMBUS */
- byte |= (1 << 1);
- /* Enable SATA and power saving */
- byte |= (1 << 0);
- /* Disable link latency enhancement */
- byte |= (1 << 5);
- pci_write_config8(sm_dev, 0xad, byte);
-
- /* Take the PHY logic out of reset */
- word = pci_read_config16(dev, 0x84);
- word |= 0x1 << 2;
- word &= ~0x1f8;
- pci_write_config16(dev, 0x84, word);
-
- /* get rev_id */
- rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
-
- printk(BIOS_SPEW, "rev_id=%x\n", rev_id);
-
- /* Enable combined mode */
- byte = pci_read_config8(sm_dev, 0xad);
- byte |= (1 << 3);
- pci_write_config8(sm_dev, 0xad, byte);
-
- struct device *ide_dev;
- /* IDE Device */
- ide_dev = pcidev_on_root(0x14, 1);
-
- /* Disable legacy IDE mode (enable PATA_BAR0/2) */
- byte = pci_read_config8(ide_dev, 0x09);
- ide_legacy_io_enabled = !(byte & 0x1);
- byte |= 0x1;
- pci_write_config8(ide_dev, 0x09, byte);
-
- /* Enable IDE I/O access (enable PATA_BAR0/2) */
- byte = pci_read_config8(ide_dev, 0x04);
- ide_io_enabled = byte & 0x1;
- byte |= 0x1;
- pci_write_config8(ide_dev, 0x04, byte);
-
- /* RPR 7.2 SATA Initialization */
- /* Set the interrupt Mapping to INTG# */
- byte = pci_read_config8(sm_dev, 0xaf);
- byte = 0x6 << 2;
- pci_write_config8(sm_dev, 0xaf, byte);
-
- /* get base address */
- sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF);
- sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
- sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
- sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
- sata_bar3 = pci_read_config16(dev, 0x1c) & ~0x3;
- sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;
-
- printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */
- printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */
- printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */
- printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */
- printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */
- printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */
-
- ide_bar0 = pci_read_config16(ide_dev, 0x10) & ~0x7;
- ide_bar1 = pci_read_config16(ide_dev, 0x14) & ~0x3;
- ide_bar2 = pci_read_config16(ide_dev, 0x18) & ~0x7;
- ide_bar3 = pci_read_config16(ide_dev, 0x1c) & ~0x3;
- printk(BIOS_SPEW, "ide_bar0=%x\n", ide_bar0);
- printk(BIOS_SPEW, "ide_bar1=%x\n", ide_bar1);
- printk(BIOS_SPEW, "ide_bar2=%x\n", ide_bar2);
- printk(BIOS_SPEW, "ide_bar3=%x\n", ide_bar3);
-
- /* Program the Subsystem ID/VID to 0x43801002 */
- dword = 0x43801002;
- pci_write_config32(dev, 0x2c, dword);
-
- /* SERR-Enable */
- word = pci_read_config16(dev, 0x04);
- word |= (1 << 8);
- pci_write_config16(dev, 0x04, word);
-
- /* Dynamic power saving */
- byte = pci_read_config8(dev, 0x40);
- byte |= (1 << 2);
- pci_write_config8(dev, 0x40, byte);
-
- /* Unlock subclass and certain BAR R/O registers */
- byte = pci_read_config8(dev, 0x40);
- byte |= (1 << 0);
- pci_write_config8(dev, 0x40, byte);
-
- /* Disable AHCI enhancement (AMD SP5100 RPR page 54) */
- dword = pci_read_config32(dev, 0x40);
- dword |= (1 << 23);
- pci_write_config32(dev, 0x40, dword);
-
- if (sata_ahci_mode) {
- /* Force number of ports to 6
- * NOTE: This is not documented in the register
- * reference guide, but CIMX needs to do this
- * to activate all 6 ports when IDE is disabled.
- */
- dword = read32(sata_bar5 + 0x00);
- dword &= ~0x7;
- dword |= 0x5;
- write32(sata_bar5 + 0x00, dword);
- } else {
- /* Set SATA Operation Mode, Set to IDE mode */
- byte = pci_read_config8(dev, 0x40);
- byte |= (1 << 4);
- pci_write_config8(dev, 0x40, byte);
-
- dword = 0x01018f00;
- pci_write_config32(dev, 0x8, dword);
- }
-
- /* Get maximum number of ports */
- max_port_count = read32(sata_bar5 + 0x00) & 0x1f;
- max_port_count++;
- printk(BIOS_SPEW, "Maximum SATA port count supported by silicon: %d\n", max_port_count);
-
- /* Set number of ports */
- dword = CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD;
- for (i = max_port_count; i < 32; i++)
- dword &= ~(0x1 << i);
- write32(sata_bar5 + 0x0c, dword);
-
- /* Disable ALPM if ALPM support not requested */
- if (!sata_alpm_enable) {
- dword = read32(sata_bar5 + 0xfc);
- dword &= ~(0x1 << 11); /* Disable ALPM */
- write32(sata_bar5 + 0xfc, dword);
- }
-
- /* Enable SATA ports */
- byte = pci_read_config8(dev, 0x42);
- if (max_port_count <= 6) {
- byte |= 0x3f;
- for (i = 0; i < max_port_count; i++)
- byte &= ~(0x1 << i);
- } else {
- byte &= ~0x3f;
- }
- pci_write_config8(dev, 0x42, byte);
-
- if (sata_ahci_mode) {
- /* FIXME
- * SeaBIOS does not know how to spin
- * up the drives and therefore hangs
- * in AHCI init if this is enabled...
- */
- /* Enable staggered spin-up */
- dword = read32(sata_bar5 + 0x00);
-#if 0
- dword |= 0x1 << 27;
-#else
- dword &= ~(0x1 << 27);
-#endif
- write32(sata_bar5 + 0x00, dword);
-
- /* Reset the HBA to avoid stuck drives in SeaBIOS */
- dword = read32(sata_bar5 + 0x04);
- dword |= 0x1;
- write32(sata_bar5 + 0x04, dword);
- }
-
- sb7xx_51xx_setup_sata_phys(dev);
- sb7xx_51xx_setup_sata_port_indication(sata_bar5);
-
- /* Write protect Sub-Class Code */
- byte = pci_read_config8(dev, 0x40);
- byte &= ~(1 << 0);
- pci_write_config8(dev, 0x40, byte);
-
- /* Enable the SATA watchdog counter */
- byte = pci_read_config8(dev, 0x44);
- byte |= (1 << 0);
- pci_write_config8(dev, 0x44, byte);
-
- /* Set bit 29 and 24 for A12 */
- dword = pci_read_config32(dev, 0x40);
- if (rev_id < 0x14) /* before A12 */
- dword |= (1 << 29);
- else
- dword &= ~(1 << 29); /* A14 and above */
- pci_write_config32(dev, 0x40, dword);
-
- /* set bit 21 for A12 */
- dword = pci_read_config32(dev, 0x48);
- if (rev_id < 0x14) /* before A12 */
- dword |= 1 << 24 | 1 << 21;
- else {
- dword &= ~(1 << 24 | 1 << 21); /* A14 and above */
- dword &= ~0xFF80; /* 15:7 */
- dword |= 1 << 15 | 0x7F << 7 | 1 << 6;
- }
- pci_write_config32(dev, 0x48, dword);
-
- /* Program the watchdog counter to 0x10 */
- byte = 0x10;
- pci_write_config8(dev, 0x46, byte);
-
- /* Enable the I/O, MM, BusMaster access for SATA */
- byte = pci_read_config8(dev, 0x4);
- byte |= 7 << 0;
- pci_write_config8(dev, 0x4, byte);
-
-#if CONFIG(SOUTHBRIDGE_AMD_SUBTYPE_SP5100)
- /* Master Latency Timer */
- pci_write_config32(dev, 0xC, 0x00004000);
-#endif
-
- /* Determine port count */
- port_count = 0;
- for (i = 0; i < 32; i++) {
- if (CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD & (0x1 << i))
- port_count = i;
- }
- port_count++;
- if (port_count > max_port_count)
- port_count = max_port_count;
-
- /* Send COMRESET to all ports */
- for (i = 0; i < port_count; i++) {
- /* Read in Port-N Serial ATA Control Register */
- byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-
- /* Set Reset Bit */
- byte |= 0x1;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
-
- /* Clear Reset Bit */
- byte &= ~0x01;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
- }
-
- /* RPR7.7 SATA drive detection. */
- /* Use BAR5+0x128,BAR0 for Primary Slave */
- /* Use BAR5+0x1A8,BAR0 for Primary Slave */
- /* Use BAR5+0x228,BAR2 for Secondary Master */
- /* Use BAR5+0x2A8,BAR2 for Secondary Slave */
- /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
- /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
- for (i = 0; i < port_count; i++) {
- byte = read8(sata_bar5 + 0x128 + 0x80 * i);
- printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
- byte &= 0xF;
- if (byte == 0x1) {
- /* If the drive status is 0x1 then we see it but we aren't talking to it. */
- /* Try to do something about it. */
- printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
-
- /* Read in Port-N Serial ATA Control Register */
- byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-
- /* Set Reset Bit and 1.5g bit */
- byte |= 0x11;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
-
- /* Clear Reset Bit */
- byte &= ~0x01;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
-
- /* Reread status */
- byte = read8(sata_bar5 + 0x128 + 0x80 * i);
- printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
- byte &= 0xF;
- }
-
- if (byte == 0x3) {
- for (j = 0; j < 10; j++) {
- if (i < 4)
- current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
- else
- current_bar = (pci_read_config8(sm_dev, 0xad) & (0x1 << 4))
- ? ide_bar2 : ide_bar0;
- ret = sata_drive_detect(i, current_bar);
- if (ret == 0) {
- break;
- } else if (ret == 2) {
- /* Read in Port-N Serial ATA Control Register */
- byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-
- /* Set Reset Bit */
- byte |= 0x1;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1000ms */
- mdelay(1000);
-
- /* Clear Reset Bit */
- byte &= ~0x01;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
- }
- }
- if (sata_ahci_mode)
- printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n",
- i,
- (j == 10) ? "not " : "",
- (j == 10) ? j : j + 1);
- else
- printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
- (i / 2) ? "Secondary" : "Primary",
- (i % 2) ? "Slave" : "Master",
- (j == 10) ? "not " : "",
- (j == 10) ? j : j + 1);
- } else {
- if (sata_ahci_mode)
- printk(BIOS_DEBUG, "No AHCI SATA drive on Slot%i\n", i);
- else
- printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
- (i / 2) ? "Secondary" : "Primary",
- (i % 2) ? "Slave" : "Master", i);
- }
- }
-
- /* Restore IDE I/O access */
- if (!ide_io_enabled) {
- byte = pci_read_config8(ide_dev, 0x04);
- byte &= ~0x1;
- pci_write_config8(ide_dev, 0x04, byte);
- }
-
- /* Re-enable legacy IDE mode */
- if (ide_legacy_io_enabled) {
- byte = pci_read_config8(ide_dev, 0x09);
- byte &= ~0x1;
- pci_write_config8(ide_dev, 0x09, byte);
- }
-
- /* Below is CIM InitSataLateFar */
- if (sata_ahci_mode) {
- /* Disable combined mode */
- byte = pci_read_config8(sm_dev, 0xad);
- byte &= ~(1 << 3);
- pci_write_config8(sm_dev, 0xad, byte);
- } else {
- /* Enable interrupts from the HBA */
- byte = read8(sata_bar5 + 0x4);
- byte |= 1 << 1;
- write8((sata_bar5 + 0x4), byte);
- }
-
- /* Clear error status */
- write32((sata_bar5 + 0x130), 0xFFFFFFFF);
- write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
- write32((sata_bar5 + 0x230), 0xFFFFFFFF);
- write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
- write32((sata_bar5 + 0x330), 0xFFFFFFFF);
- write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
-
- /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
- /* ????? why CIM does not set the AcpiGpe0BlkAddr, but use it??? */
-
- /* word = 0x0000; */
- /* word = pm_ioread(0x28); */
- /* byte = pm_ioread(0x29); */
- /* word |= byte<<8; */
- /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */
- /* write32(word, 0x80000000); */
-}
-
-static struct pci_operations lops_pci = {
- .set_subsystem = pci_dev_set_subsystem,
-};
-
-static struct device_operations sata_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = sata_init,
- .scan_bus = 0,
- .ops_pci = &lops_pci,
-};
-
-static const struct pci_driver sata0_driver __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_ATI,
- .device = PCI_DEVICE_ID_ATI_SB700_SATA,
-};
-
-static const struct pci_driver sata1_driver __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_ATI,
- .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI,
-};
-
-static const struct pci_driver sata2_driver __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_ATI,
- .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD,
-};