diff options
Diffstat (limited to 'src/southbridge/amd/sb700/sb700_early_setup.c')
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_early_setup.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/southbridge/amd/sb700/sb700_early_setup.c b/src/southbridge/amd/sb700/sb700_early_setup.c index a063c70cf9..3777bd6288 100644 --- a/src/southbridge/amd/sb700/sb700_early_setup.c +++ b/src/southbridge/amd/sb700/sb700_early_setup.c @@ -300,16 +300,16 @@ static void sb700_devices_por_init(void) device_t dev; u8 byte; - printk_info("sb700_devices_por_init()\n"); + printk(BIOS_INFO, "sb700_devices_por_init()\n"); /* SMBus Device, BDF:0-20-0 */ - printk_info("sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\r\n"); /* NOT REACHED */ } - printk_info("SMBus controller enabled, sb revision is A%x\r\n", + printk(BIOS_INFO, "SMBus controller enabled, sb revision is A%x\r\n", set_sb700_revision()); /* sbPorAtStartOfTblCfg */ @@ -378,7 +378,7 @@ static void sb700_devices_por_init(void) outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); /* IDE Device, BDF:0-20-1 */ - printk_info("sb700_devices_por_init(): IDE Device, BDF:0-20-1\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): IDE Device, BDF:0-20-1\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0); /* Disable prefetch */ byte = pci_read_config8(dev, 0x63); @@ -386,7 +386,7 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x63, byte); /* LPC Device, BDF:0-20-3 */ - printk_info("sb700_devices_por_init(): LPC Device, BDF:0-20-3\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): LPC Device, BDF:0-20-3\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0); /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); @@ -423,7 +423,7 @@ static void sb700_devices_por_init(void) /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, */ - printk_info("sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); /* Arbiter enable. */ @@ -440,7 +440,7 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x50, 0x01); /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ - printk_info("sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); + printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); /*PHY Global Control*/ @@ -457,7 +457,7 @@ static void sb700_pmio_por_init(void) { u8 byte; - printk_info("sb700_pmio_por_init()\n"); + printk(BIOS_INFO, "sb700_pmio_por_init()\n"); /* K8KbRstEn, KB_RST# control for K8 system. */ byte = pmio_read(0x66); byte |= 0x20; @@ -602,7 +602,7 @@ static void sb700_before_pci_init(void) */ static void sb700_early_setup(void) { - printk_info("sb700_early_setup()\n"); + printk(BIOS_INFO, "sb700_early_setup()\n"); sb700_por_init(); } |