diff options
Diffstat (limited to 'src/southbridge/amd/sb700/sb700_sata.c')
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_sata.c | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/src/southbridge/amd/sb700/sb700_sata.c b/src/southbridge/amd/sb700/sb700_sata.c index cd5084e745..48c192c95d 100644 --- a/src/southbridge/amd/sb700/sb700_sata.c +++ b/src/southbridge/amd/sb700/sb700_sata.c @@ -34,22 +34,22 @@ int sata_drive_detect(int portnum, u16 iobar) while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), (byte != (0xA0 + 0x10 * (portnum % 2))) || ((byte2 & 0x88) != 0)) { - printk_spew("0x6=%x, 0x7=%x\n", byte, byte2); + printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the * second SATA port is poulated. */ - printk_debug("drive no longer selected after %i ms, " + printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); return 1; } else - printk_spew("drive detection not yet completed, " + printk(BIOS_SPEW, "drive detection not yet completed, " "waiting...\n"); mdelay(10); i++; } - printk_spew("drive detection done after %i ms\n", i * 10); + printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10); return 0; } @@ -96,12 +96,12 @@ static void sata_init(struct device *dev) sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; - printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */ - printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */ - printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ - printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ - printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ - printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */ + printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */ /* disable combined mode */ byte = pci_read_config8(sm_dev, 0xAD); @@ -199,12 +199,12 @@ static void sata_init(struct device *dev) for (i = 0; i < 4; i++) { byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; if( byte == 0x1 ) { /* If the drive status is 0x1 then we see it but we aren't talking to it. */ /* Try to do something about it. */ - printk_spew("SATA device detected but not talking. Trying lower speed.\n"); + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); /* Read in Port-N Serial ATA Control Register */ byte = read8(sata_bar5 + 0x12C + 0x80 * i); @@ -225,7 +225,7 @@ static void sata_init(struct device *dev) /* Reread status */ byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk_spew("SATA port %i status = %x\n", i, byte); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; } @@ -234,13 +234,13 @@ static void sata_init(struct device *dev) if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) break; } - printk_debug("%s %s device is %sready after %i tries\n", + printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", (j == 10) ? "not " : "", (j == 10) ? j : j + 1); } else { - printk_debug("No %s %s SATA drive on Slot%i\n", + printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", i); } @@ -267,7 +267,7 @@ static void sata_init(struct device *dev) /* word = pm_ioread(0x28); */ /* byte = pm_ioread(0x29); */ /* word |= byte<<8; */ - /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */ + /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */ /* write32(word, 0x80000000); */ } |