summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb700/sm.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd/sb700/sm.c')
-rw-r--r--src/southbridge/amd/sb700/sm.c381
1 files changed, 381 insertions, 0 deletions
diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c
new file mode 100644
index 0000000000..69df215f52
--- /dev/null
+++ b/src/southbridge/amd/sb700/sm.c
@@ -0,0 +1,381 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <pc80/mc146818rtc.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
+#include <stdlib.h>
+#include "sb700.h"
+#include "smbus.c"
+
+#define NMI_OFF 0
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+/*
+* SB700 enables all USB controllers by default in SMBUS Control.
+* SB700 enables SATA by default in SMBUS Control.
+*/
+static void sm_init(device_t dev)
+{
+ u8 byte;
+ u8 byte_old;
+ u32 dword;
+ u32 ioapic_base;
+ u32 on;
+ u32 nmi_option;
+
+ printk(BIOS_INFO, "sm_init().\n");
+
+ ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
+ /* Don't rename APIC ID */
+ /* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8.
+ * We need to check out why and change back. */
+ clear_ioapic(ioapic_base);
+
+ /* 2.10 Interrupt Routing/Filtering */
+ dword = pci_read_config8(dev, 0x62);
+ dword |= 3;
+ pci_write_config8(dev, 0x62, dword);
+
+ /* Delay back to back interrupts to the CPU. */
+ dword = pci_read_config16(dev, 0x64);
+ dword |= 1 << 13;
+ pci_write_config16(dev, 0x64, dword);
+
+ /* rrg:K8 INTR Enable (BIOS should set this bit after PIC initialization) */
+ /* rpr 2.1 Enabling Legacy Interrupt */
+ dword = pci_read_config8(dev, 0x62);
+ dword |= 1 << 2;
+ pci_write_config8(dev, 0x62, dword);
+
+ dword = pci_read_config32(dev, 0x78);
+ dword |= 1 << 9;
+ pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */
+
+ /* bit 10: MultiMediaTimerIrqEn */
+ dword = pci_read_config8(dev, 0x64);
+ dword |= 1 << 10;
+ pci_write_config8(dev, 0x64, dword);
+ /* enable serial irq */
+ byte = pci_read_config8(dev, 0x69);
+ byte |= 1 << 7; /* enable serial irq function */
+ byte &= ~(0xF << 2);
+ byte |= 4 << 2; /* set NumSerIrqBits=4 */
+ pci_write_config8(dev, 0x69, byte);
+
+ /* IRQ0From8254 */
+ byte = pci_read_config8(dev, 0x41);
+ byte &= ~(1 << 7);
+ pci_write_config8(dev, 0x41, byte);
+
+ byte = pm_ioread(0x61);
+ byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */
+ pm_iowrite(0x61, byte);
+
+ /* disable SMI */
+ byte = pm_ioread(0x53);
+ byte |= 1 << 3;
+ pm_iowrite(0x53, byte);
+
+ /* power after power fail */
+ on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ get_option(&on, "power_on_after_fail");
+ byte = pm_ioread(0x74);
+ byte &= ~0x03;
+ if (on) {
+ byte |= 2;
+ }
+ byte |= 1 << 2;
+ pm_iowrite(0x74, byte);
+ printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off");
+
+ byte = pm_ioread(0x68);
+ byte &= ~(1 << 1);
+ /* 2.7 */
+ byte |= 1 << 2;
+ pm_iowrite(0x68, byte);
+
+ /* 2.7 */
+ byte = pm_ioread(0x65);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x65, byte);
+
+ /* 2.16 */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 5;
+ pm_iowrite(0x55, byte);
+
+ byte = pm_ioread(0xD7);
+ byte |= 1 << 6 | 1 << 1;;
+ pm_iowrite(0xD7, byte);
+
+ /* 2.15 */
+ byte = pm_ioread(0x42);
+ byte &= ~(1 << 2);
+ pm_iowrite(0x42, byte);
+
+ /* Set up NMI on errors */
+ byte = inb(0x70); /* RTC70 */
+ byte_old = byte;
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ byte &= ~(1 << 7); /* set NMI */
+ printk(BIOS_INFO, "++++++++++set NMI+++++\n");
+ } else {
+ byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */
+ printk(BIOS_INFO, "++++++++++no set NMI+++++\n");
+ }
+ byte &= ~(1 << 7);
+ if (byte != byte_old) {
+ outb(byte, 0x70);
+ }
+
+ /* 2.11 IO Trap Settings */
+ abcfg_reg(0x10090, 1 << 16, 1 << 16);
+
+ /* ab index */
+ pci_write_config32(dev, 0xF0, AB_INDX);
+ /* Initialize the real time clock */
+ rtc_init(0);
+
+ /* 4.3 Enabling Upstream DMA Access */
+ axcfg_reg(0x04, 1 << 2, 1 << 2);
+ /* 4.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */
+ abcfg_reg(0x10060, 9 << 17, 9 << 17);
+ abcfg_reg(0x10064, 9 << 17, 9 << 17);
+
+ /* 4.5 Enabling OHCI Prefetch for Performance Enhancement, A12 */
+ abcfg_reg(0x80, 1 << 0, 1<< 0);
+
+ /* 4.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */
+ /* 4.7 Enabling Additional Address Bits Checking in Downstream */
+ /* 4.15 IO write and SMI ordering enhancement*/
+ abcfg_reg(0x9c, 3 << 0 | 1 << 8, 3 << 0 | 1 << 8);
+
+ /* 4.8 Set B-Link Prefetch Mode */
+ abcfg_reg(0x80, 3 << 17, 3 << 17);
+
+ /* 4.9 Enabling Detection of Upstream Interrupts */
+ abcfg_reg(0x94, 1 << 20 | 0x7FFFF, 1 << 20 | 0x00FEE);
+
+ /* 4.10: Enabling Downstream Posted Transactions to Pass Non-Posted
+ * Transactions for the K8 Platform (for All Revisions) */
+ abcfg_reg(0x10090, 1 << 8, 1 << 8);
+
+ /* 4.11:Programming Cycle Delay for AB and BIF Clock Gating */
+ /* 4.12: Enabling AB and BIF Clock Gating */
+ abcfg_reg(0x10054, 0xFFFF0000, 0x1040000);
+ abcfg_reg(0x54, 0xFF << 16, 4 << 16);
+ abcfg_reg(0x54, 1 << 24, 0 << 24);
+ abcfg_reg(0x98, 0x0000FF00, 0x00004700);
+
+ /* 4.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */
+ abcfg_reg(0x10054, 0x0000FFFF, 0x07FF);
+
+ /* 4.14:Enabling Requester ID for upstream traffic. */
+ abcfg_reg(0x98, 1 << 16, 1 << 16);
+
+ /* 9.2: Enabling IDE Data Bus DD7 Pull Down Resistor */
+ byte = pm2_ioread(0xE5);
+ byte |= 1 << 2;
+ pm2_iowrite(0xE5, byte);
+
+ /* Enable IDE controller. */
+ byte = pm_ioread(0x59);
+ byte &= ~(1 << 1);
+ pm_iowrite(0x59, byte);
+
+ printk(BIOS_INFO, "sm_init() end\n");
+
+ /* Enable NbSb virtual channel */
+ axcfg_reg(0x114, 0x3f << 1, 0 << 1);
+ axcfg_reg(0x120, 0x7f << 1, 0x7f << 1);
+ axcfg_reg(0x120, 7 << 24, 1 << 24);
+ axcfg_reg(0x120, 1 << 31, 1 << 31);
+ abcfg_reg(0x50, 1 << 3, 1 << 3);
+}
+
+static int lsmbus_recv_byte(device_t dev)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_recv_byte(res->base, device);
+}
+
+static int lsmbus_send_byte(device_t dev, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_send_byte(res->base, device, val);
+}
+
+static int lsmbus_read_byte(device_t dev, u8 address)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static int lsmbus_write_byte(device_t dev, u8 address, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_write_byte(res->base, device, address, val);
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+ .recv_byte = lsmbus_recv_byte,
+ .send_byte = lsmbus_send_byte,
+ .read_byte = lsmbus_read_byte,
+ .write_byte = lsmbus_write_byte,
+};
+
+static void sb700_sm_read_resources(device_t dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 7;
+ pm_iowrite(0x55, byte);
+
+ /* Get the normal pci resources of this device */
+ /* pci_dev_read_resources(dev); */
+
+ byte = pm_ioread(0x55);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x55, byte);
+
+ /* apic */
+ res = new_resource(dev, 0x74);
+ res->base = IO_APIC_ADDR;
+ res->size = 256 * 0x10;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+
+ #if 0 /* Linux ACPI crashes when it is 1. For late debugging. */
+ res = new_resource(dev, 0x14); /* TODO: hpet */
+ res->base = 0xfed00000; /* reset hpet to widely accepted address */
+ res->size = 0x400;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+ #endif
+ /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
+
+ /* smbus */
+ res = new_resource(dev, 0x90);
+ res->base = 0xB00;
+ res->size = 0x10;
+ res->limit = 0xFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
+
+ compact_resources(dev);
+}
+
+static void sb700_sm_set_resources(struct device *dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ pci_dev_set_resources(dev);
+
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */
+ byte = pm_ioread(0x52);
+ byte |= 1 << 6;
+ pm_iowrite(0x52, byte);
+
+ res = find_resource(dev, 0x74);
+ pci_write_config32(dev, 0x74, res->base | 1 << 3);
+#if 0 /* TODO:hpet */
+ res = find_resource(dev, 0x14);
+ pci_write_config32(dev, 0x14, res->base);
+#endif
+ res = find_resource(dev, 0x90);
+ pci_write_config32(dev, 0x90, res->base | 1);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations smbus_ops = {
+ .read_resources = sb700_sm_read_resources,
+ .set_resources = sb700_sm_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sm_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+
+static const struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_SM,
+};