summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd')
-rw-r--r--src/southbridge/amd/cimx/sb700/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb700/smbus_spd.c164
-rw-r--r--src/southbridge/amd/cimx/sb700/smbus_spd.h65
-rw-r--r--src/southbridge/amd/cimx/sb800/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb800/smbus_spd.c123
-rw-r--r--src/southbridge/amd/cimx/sb800/smbus_spd.h51
-rw-r--r--src/southbridge/amd/cimx/sb900/Makefile.inc2
-rw-r--r--src/southbridge/amd/cimx/sb900/smbus_spd.c177
8 files changed, 583 insertions, 3 deletions
diff --git a/src/southbridge/amd/cimx/sb700/Makefile.inc b/src/southbridge/amd/cimx/sb700/Makefile.inc
index ff96ca6a53..7e878e3690 100644
--- a/src/southbridge/amd/cimx/sb700/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb700/Makefile.inc
@@ -21,7 +21,7 @@
# SB700 Platform Files
romstage-y += early.c
-romstage-y += smbus.c
+romstage-y += smbus.c smbus_spd.c
romstage-y += reset.c
ramstage-y += late.c
diff --git a/src/southbridge/amd/cimx/sb700/smbus_spd.c b/src/southbridge/amd/cimx/sb700/smbus_spd.c
new file mode 100644
index 0000000000..5e3e6894b9
--- /dev/null
+++ b/src/southbridge/amd/cimx/sb700/smbus_spd.c
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <device/pci_def.h>
+#include <device/device.h>
+#include <stdlib.h>
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
+
+/* warning: Porting.h includes an open #pragma pack(1) */
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include "chip.h"
+#include "smbus_spd.h"
+
+#include <northbridge/amd/agesa/dimmSpd.h>
+
+/* uncomment for source level debug - GDB gets really confused otherwise. */
+//#pragma optimize ("", off)
+
+/**
+ * Read a single SPD byte. If the first byte is being read, set up the
+ * address and offset. Following bytes auto increment.
+ */
+static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
+ int offset, int initial_offset)
+{
+ unsigned int status = -1;
+ UINT64 time_limit;
+
+ /* clear status register */
+ __outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
+ __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
+
+ if (offset == initial_offset) {
+ /* Set offset, set slave address and start reading */
+ __outbyte(iobase + SMBUS_CONTROL_REG, offset);
+ __outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
+ } else {
+ /* Issue read command - auto increments to next byte */
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
+ }
+ /* time limit to avoid hanging for unexpected error status */
+ time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
+ while (__rdtsc() <= time_limit) {
+ status = __inbyte(iobase + SMBUS_STATUS_REG);
+ if ((status & SMBUS_INTERRUPT_MASK) == 0)
+ continue; /* SMBusInterrupt not set, keep waiting */
+ if ((status & HOSTBUSY_MASK) != 0)
+ continue; /* HostBusy set, keep waiting */
+ break;
+ }
+
+ if (status != STATUS__COMPLETED_SUCCESSFULLY)
+ return AGESA_ERROR;
+
+ buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
+ return AGESA_SUCCESS;
+}
+
+/**
+ * Write a single smbus byte.
+ */
+UINT8 writeSmbusByte(UINT16 iobase, UINT8 address, UINT8 buffer,
+ int offset)
+{
+ unsigned int status = -1;
+ UINT64 time_limit;
+
+ /* clear status register */
+ __outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
+ __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
+
+ /* set offset, set slave address, set data and start writing */
+ __outbyte(iobase + SMBUS_CONTROL_REG, offset);
+ __outbyte(iobase + SMBUS_HOST_CMD_REG, address & (~READ_BIT));
+ __outbyte(iobase + SMBUS_DATA0_REG, buffer);
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_WRITE_BYTE_COMMAND);
+
+ /* time limit to avoid hanging for unexpected error status */
+ time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
+ while (__rdtsc() <= time_limit) {
+ status = __inbyte(iobase + SMBUS_STATUS_REG);
+ if ((status & SMBUS_INTERRUPT_MASK) == 0)
+ continue; /* SMBusInterrupt not set, keep waiting */
+ if ((status & HOSTBUSY_MASK) != 0)
+ continue; /* HostBusy set, keep waiting */
+ break;
+ }
+
+ if (status != STATUS__COMPLETED_SUCCESSFULLY)
+ return AGESA_ERROR;
+
+ return AGESA_SUCCESS;
+}
+
+static void setupFch(UINT16 ioBase)
+{
+ AMD_CONFIG_PARAMS StdHeader;
+ UINT32 PciData32;
+ UINT8 PciData8;
+ PCI_ADDR PciAddress;
+
+ /* Set SMBus MMIO. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
+ PciData32 = (ioBase & 0xFFFFFFF0) | BIT0;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
+
+ /* Enable SMBus MMIO. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
+ LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
+ PciData8 |= BIT0;
+ LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
+
+ /* Set SMBus clock to 400 KHz */
+ __outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
+}
+
+/**
+ * Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
+ UINT16 count)
+{
+ UINT16 index;
+ UINT8 status;
+ UINT8 initial_offset = 0;
+
+ setupFch(iobase);
+
+ for (index = initial_offset; index < count; index++) {
+ status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index,
+ initial_offset);
+ if (status != AGESA_SUCCESS)
+ return status;
+ }
+
+ return status;
+}
+
+int smbus_readSpd(int spdAddress, char *buf, size_t len)
+{
+ int ioBase = SMBUS0_BASE_ADDRESS;
+ setupFch (ioBase);
+ return readspd (ioBase, spdAddress, buf, len);
+}
diff --git a/src/southbridge/amd/cimx/sb700/smbus_spd.h b/src/southbridge/amd/cimx/sb700/smbus_spd.h
new file mode 100644
index 0000000000..107c79fb5b
--- /dev/null
+++ b/src/southbridge/amd/cimx/sb700/smbus_spd.h
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA02110-1301 USA
+ */
+
+#ifndef _SMBUS_SPD_H_
+#define _SMBUS_SPD_H_
+
+#define READ_BIT 0x01
+
+#define SMBUS_INTERRUPT_MASK 0x02
+#define HOSTBUSY_MASK 0x01
+
+#define SMBUS_READ_BYTE_COMMAND 0x48
+#define SMBUS_READ_COMMAND 0x44
+
+#define SMBUS_WRITE_BYTE_COMMAND 0x48
+
+#define MAX_READ_TSC_COUNT (2000000000 / 10)
+
+#define PMIO_INDEX_REG 0xCD6
+#define PMIO_DATA_REG 0xCD7
+
+#define SMBUS_BAR_LOW_BYTE 0x2C
+#define SMBUS_BAR_HIGH_BYTE 0x2D
+
+#define SMBUS_STATUS_REG 0x00
+#define SMBUS_SLAVE_STATUS_REG 0x01
+#define SMBUS_COMMAND_REG 0x02
+#define SMBUS_CONTROL_REG 0x03
+#define SMBUS_HOST_CMD_REG 0x04
+#define SMBUS_DATA0_REG 0x05
+#define SMBUS_CLOCK_REG 0x0E
+
+#define STATUS__COMPLETED_SUCCESSFULLY 0x02
+
+#define SMBUS_FREQUENCY_CONST 66000000 / 4
+
+/*
+ * This function prototype is only used by the AMD Dinar mainboard. The SMBus
+ * write is used to select which socket's SPD will be read by the subsequent
+ * SPD read call. This function is being placed in the F15 wrapper code with
+ * the other SPD read functions because the next step of the SPD read clean-up
+ * will be to move the SMBus read/write functions into the southbridge to make
+ * them more generic. Having the writeSmbusByte() function in the same file as
+ * the readSmbusByte() function will ensure that the writeSmbusByte() function
+ * is not overlooked.
+ */
+UINT8 writeSmbusByte(UINT16 iobase, UINT8 address, UINT8 buffer, int offset);
+
+#endif
diff --git a/src/southbridge/amd/cimx/sb800/Makefile.inc b/src/southbridge/amd/cimx/sb800/Makefile.inc
index 1c65eeeef9..95daf70d62 100644
--- a/src/southbridge/amd/cimx/sb800/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb800/Makefile.inc
@@ -22,7 +22,7 @@
romstage-y += cfg.c
romstage-y += early.c
-romstage-y += smbus.c
+romstage-y += smbus.c smbus_spd.c
romstage-y += reset.c
ramstage-y += cfg.c
diff --git a/src/southbridge/amd/cimx/sb800/smbus_spd.c b/src/southbridge/amd/cimx/sb800/smbus_spd.c
new file mode 100644
index 0000000000..e3f5acc95b
--- /dev/null
+++ b/src/southbridge/amd/cimx/sb800/smbus_spd.c
@@ -0,0 +1,123 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/pci_def.h>
+#include <device/device.h>
+#include <stdlib.h>
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
+
+/* warning: Porting.h includes an open #pragma pack(1) */
+#include "Porting.h"
+#include "AGESA.h"
+#include "chip.h"
+#include "smbus_spd.h"
+
+#include <northbridge/amd/agesa/dimmSpd.h>
+
+/* uncomment for source level debug - GDB gets really confused otherwise. */
+//#pragma optimize ("", off)
+
+/**
+ * Read a single SPD byte. If the first byte is being read, set up the
+ * address and offset. Following bytes auto increment.
+ */
+static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
+ int offset, int initial_offset)
+{
+ unsigned int status = -1;
+ UINT64 time_limit;
+
+ /* clear status register */
+ __outbyte(iobase + SMBUS_STATUS_REG, 0x1E);
+
+ if (offset == initial_offset) {
+ /* Clear slave status, set offset, set slave address and start reading */
+ __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x3E);
+ __outbyte(iobase + SMBUS_CONTROL_REG, offset);
+ __outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
+ } else {
+ /* Issue read command - auto increments to next byte */
+ __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
+ }
+ /* time limit to avoid hanging for unexpected error status */
+ time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
+ while (__rdtsc() <= time_limit) {
+ status = __inbyte(iobase + SMBUS_STATUS_REG);
+ if ((status & SMBUS_INTERRUPT_MASK) == 0)
+ continue; /* SMBusInterrupt not set, keep waiting */
+ if ((status & HOSTBUSY_MASK) != 0)
+ continue; /* HostBusy set, keep waiting */
+ break;
+ }
+
+ if (status != STATUS__COMPLETED_SUCCESSFULLY)
+ return AGESA_ERROR;
+
+ buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
+ return AGESA_SUCCESS;
+}
+
+static void writePmReg(UINT8 reg, UINT8 data)
+{
+ __outbyte(PMIO_INDEX_REG, reg);
+ __outbyte(PMIO_DATA_REG, data);
+}
+
+static void setupFch(UINT16 ioBase)
+{
+ /* set up SMBUS - Set to SMBUS 0 & set base address */
+ /* For SB800 & Hudson1 to SB900 & Hudson 2/3 */
+ writePmReg(SMBUS_BAR_HIGH_BYTE, ioBase >> 8);
+ writePmReg(SMBUS_BAR_LOW_BYTE, (ioBase & 0xe0) | 1);
+
+ /* set SMBus clock to 400 KHz */
+ __outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
+}
+
+/**
+ * Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
+ UINT16 count)
+{
+ UINT16 index;
+ UINT8 status;
+ UINT8 initial_offset = 0;
+
+ setupFch(iobase);
+
+ for (index = initial_offset; index < count; index++) {
+ status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index,
+ initial_offset);
+ if (status != AGESA_SUCCESS)
+ return status;
+ }
+
+ return status;
+}
+
+int smbus_readSpd(int spdAddress, char *buf, size_t len)
+{
+ int ioBase = SMBUS0_BASE_ADDRESS;
+ setupFch (ioBase);
+ return readspd (ioBase, spdAddress, buf, len);
+}
diff --git a/src/southbridge/amd/cimx/sb800/smbus_spd.h b/src/southbridge/amd/cimx/sb800/smbus_spd.h
new file mode 100644
index 0000000000..30bf83f442
--- /dev/null
+++ b/src/southbridge/amd/cimx/sb800/smbus_spd.h
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA02110-1301 USA
+ */
+
+#ifndef _SMBUS_SPD_H_
+#define _SMBUS_SPD_H_
+
+#define READ_BIT 0x01
+
+#define SMBUS_INTERRUPT_MASK 0x02
+#define HOSTBUSY_MASK 0x01
+
+#define SMBUS_READ_BYTE_COMMAND 0x48
+#define SMBUS_READ_COMMAND 0x44
+
+#define MAX_READ_TSC_COUNT (2000000000 / 10)
+
+#define PMIO_INDEX_REG 0xCD6
+#define PMIO_DATA_REG 0xCD7
+
+#define SMBUS_BAR_LOW_BYTE 0x2C
+#define SMBUS_BAR_HIGH_BYTE 0x2D
+
+#define SMBUS_STATUS_REG 0x00
+#define SMBUS_SLAVE_STATUS_REG 0x01
+#define SMBUS_COMMAND_REG 0x02
+#define SMBUS_CONTROL_REG 0x03
+#define SMBUS_HOST_CMD_REG 0x04
+#define SMBUS_DATA0_REG 0x05
+#define SMBUS_CLOCK_REG 0x0E
+
+#define STATUS__COMPLETED_SUCCESSFULLY 0x02
+
+#define SMBUS_FREQUENCY_CONST 66000000 / 4
+
+#endif
diff --git a/src/southbridge/amd/cimx/sb900/Makefile.inc b/src/southbridge/amd/cimx/sb900/Makefile.inc
index 6cd392f363..c332948875 100644
--- a/src/southbridge/amd/cimx/sb900/Makefile.inc
+++ b/src/southbridge/amd/cimx/sb900/Makefile.inc
@@ -22,7 +22,7 @@
romstage-y += cfg.c
romstage-y += early.c
-romstage-y += smbus.c
+romstage-y += smbus.c smbus_spd.c
romstage-y += reset.c
ramstage-y += cfg.c
diff --git a/src/southbridge/amd/cimx/sb900/smbus_spd.c b/src/southbridge/amd/cimx/sb900/smbus_spd.c
new file mode 100644
index 0000000000..3fd4439985
--- /dev/null
+++ b/src/southbridge/amd/cimx/sb900/smbus_spd.c
@@ -0,0 +1,177 @@
+/*****************************************************************************
+ *
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+
+#include <northbridge/amd/agesa/dimmSpd.h>
+
+#define SMBUS_BASE_ADDR 0xB00
+
+STATIC
+VOID
+WritePmReg (
+ IN UINT8 Reg,
+ IN UINT8 Data
+ )
+{
+ __outbyte (0xCD6, Reg);
+ __outbyte (0xCD7, Data);
+}
+STATIC
+VOID
+SetupFch (
+ IN UINT16
+ IN IoBase
+ )
+{
+ WritePmReg (0x2D, IoBase >> 8);
+ WritePmReg (0x2C, IoBase | 1);
+ WritePmReg (0x29, 0x80);
+ WritePmReg (0x28, 0x61);
+ /* set SMBus clock to 400 KHz */
+ __outbyte (IoBase + 0x0E, 66000000 / 400000 / 4);
+}
+
+/*
+ *
+ * ReadSmbusByteData - read a single SPD byte from any offset
+ *
+ */
+
+STATIC
+AGESA_STATUS
+ReadSmbusByteData (
+ IN UINT16 Iobase,
+ IN UINT8 Address,
+ OUT UINT8 *Buffer,
+ IN UINTN Offset
+ )
+{
+ UINTN Status;
+ UINT64 Limit;
+
+ Address |= 1; // set read bit
+
+ __outbyte (Iobase + 0, 0xFF); // clear error status
+ __outbyte (Iobase + 1, 0x1F); // clear error status
+ __outbyte (Iobase + 3, Offset); // offset in eeprom
+ __outbyte (Iobase + 4, Address); // slave address and read bit
+ __outbyte (Iobase + 2, 0x48); // read byte command
+
+ /* time limit to avoid hanging for unexpected error status (should never happen) */
+ Limit = __rdtsc () + 2000000000 / 10;
+ for (;;) {
+ Status = __inbyte (Iobase);
+ if (__rdtsc () > Limit) break;
+ if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ Buffer [0] = __inbyte (Iobase + 5);
+ if (Status == 2) Status = 0; // check for done with no errors
+ return Status;
+ }
+
+/*
+ *
+ * ReadSmbusByte - read a single SPD byte from the default offset
+ * this function is faster function readSmbusByteData
+ *
+ */
+
+STATIC
+AGESA_STATUS
+ReadSmbusByte (
+ IN UINT16 Iobase,
+ IN UINT8 Address,
+ OUT UINT8 *Buffer
+ )
+{
+ UINTN Status;
+ UINT64 Limit;
+
+ __outbyte (Iobase + 0, 0xFF); // clear error status
+ __outbyte (Iobase + 2, 0x44); // read command
+
+ // time limit to avoid hanging for unexpected error status
+ Limit = __rdtsc () + 2000000000 / 10;
+ for (;;) {
+ Status = __inbyte (Iobase);
+ if (__rdtsc () > Limit) break;
+ if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ Buffer [0] = __inbyte (Iobase + 5);
+ if (Status == 2) Status = 0; // check for done with no errors
+ return Status;
+}
+
+/*
+ *
+ * ReadSpd - Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Optimization relies on autoincrement to avoid
+ * sending offset for every byte.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ *
+ */
+
+STATIC
+AGESA_STATUS
+ReadSpd (
+ IN UINT16 IoBase,
+ IN UINT8 SmbusSlaveAddress,
+ OUT UINT8 *Buffer,
+ IN UINTN Count
+ )
+{
+ UINTN Index, Status;
+
+ /* read the first byte using offset zero */
+ Status = ReadSmbusByteData (IoBase, SmbusSlaveAddress, Buffer, 0);
+ if (Status) return Status;
+
+ /* read the remaining bytes using auto-increment for speed */
+ for (Index = 1; Index < Count; Index++){
+ Status = ReadSmbusByte (IoBase, SmbusSlaveAddress, &Buffer [Index]);
+ if (Status) return Status;
+ }
+ return 0;
+}
+
+int smbus_readSpd(int spdAddress, char *buf, size_t len)
+{
+ SetupFch (SMBUS_BASE_ADDR);
+ return ReadSpd (SMBUS_BASE_ADDR, spdAddress, (UINT8 *) buf, len);
+}