summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd')
-rw-r--r--src/southbridge/amd/amd8111/amd8111_nic.c6
-rw-r--r--src/southbridge/amd/cs5530/cs5530_vga.c54
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c22
-rw-r--r--src/southbridge/amd/sb600/sb600_hda.c18
-rw-r--r--src/southbridge/amd/sb600/sb600_sata.c24
-rw-r--r--src/southbridge/amd/sb600/sb600_usb.c8
6 files changed, 66 insertions, 66 deletions
diff --git a/src/southbridge/amd/amd8111/amd8111_nic.c b/src/southbridge/amd/amd8111/amd8111_nic.c
index d326d83dda..98ac62b5d7 100644
--- a/src/southbridge/amd/amd8111/amd8111_nic.c
+++ b/src/southbridge/amd/amd8111/amd8111_nic.c
@@ -54,12 +54,12 @@ static void nic_init(struct device *dev)
/* Hard Reset PHY */
printk_debug("Reseting PHY... ");
if (conf->phy_lowreset) {
- writel(VAL0 | PHY_RST_POL | RESET_PHY , (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), VAL0 | PHY_RST_POL | RESET_PHY);
} else {
- writel(VAL0 | RESET_PHY, (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), VAL0 | RESET_PHY);
}
mdelay(15);
- writel(RESET_PHY, (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), RESET_PHY);
printk_debug("Done\n");
}
diff --git a/src/southbridge/amd/cs5530/cs5530_vga.c b/src/southbridge/amd/cs5530/cs5530_vga.c
index 2dc8cf0b3b..b5182590d5 100644
--- a/src/southbridge/amd/cs5530/cs5530_vga.c
+++ b/src/southbridge/amd/cs5530/cs5530_vga.c
@@ -242,27 +242,27 @@ static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val)
unsigned long reg;
/* disable the PLL first, reset and power it down */
- reg = readl(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20;
+ reg = read32(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20;
reg |= 0x80000100;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* write the new PLL setting */
reg |= (pll_val & ~0x80000920);
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
mdelay(1); /* wait for control voltage to be 0V */
/* enable the PLL */
reg |= 0x00000800;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* clear reset */
reg &= ~0x80000000;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* clear bypass */
reg &= ~0x00000100;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
}
/**
@@ -286,15 +286,15 @@ static void dc_setup_layout(void *gx_base, const struct video_mode *mode)
{
u32 base = 0x00000000;
- writel(base, gx_base + DC_FB_ST_OFFSET);
+ write32(gx_base + DC_FB_ST_OFFSET, base);
base += (COLOUR_DEPTH>>3) * mode->visible_pixel * mode->visible_lines;
- writel(base, gx_base + DC_CB_ST_OFFSET);
- writel(base, gx_base + DC_CURS_ST_OFFSET);
- writel(base, gx_base + DC_VID_ST_OFFSET);
- writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2, gx_base + DC_LINE_DELTA);
- writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3, gx_base + DC_BUF_SIZE);
+ write32(gx_base + DC_CB_ST_OFFSET, base);
+ write32(gx_base + DC_CURS_ST_OFFSET, base);
+ write32(gx_base + DC_VID_ST_OFFSET, base);
+ write32(gx_base + DC_LINE_DELTA, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2);
+ write32(gx_base + DC_BUF_SIZE, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3);
}
/**
@@ -343,20 +343,20 @@ static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
vtotal = vblankend;
/* row description */
- writel((hactive - 1) | ((htotal - 1) << 16), gx_base + DC_H_TIMING_1);
+ write32(gx_base + DC_H_TIMING_1, (hactive - 1) | ((htotal - 1) << 16));
/* horizontal blank description */
- writel((hblankstart - 1) | ((hblankend - 1) << 16), gx_base + DC_H_TIMING_2);
+ write32(gx_base + DC_H_TIMING_2, (hblankstart - 1) | ((hblankend - 1) << 16));
/* horizontal sync description */
- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_H_TIMING_3);
- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_FP_H_TIMING);
+ write32(gx_base + DC_H_TIMING_3, (hsyncstart - 1) | ((hsyncend - 1) << 16));
+ write32(gx_base + DC_FP_H_TIMING, (hsyncstart - 1) | ((hsyncend - 1) << 16));
/* line description */
- writel((vactive - 1) | ((vtotal - 1) << 16), gx_base + DC_V_TIMING_1);
+ write32(gx_base + DC_V_TIMING_1, (vactive - 1) | ((vtotal - 1) << 16));
/* vertical blank description */
- writel((vblankstart - 1) | ((vblankend - 1) << 16), gx_base + DC_V_TIMING_2);
+ write32(gx_base + DC_V_TIMING_2, (vblankstart - 1) | ((vblankend - 1) << 16));
/* vertical sync description */
- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), gx_base + DC_V_TIMING_3);
- writel((vsyncstart - 2) | ((vsyncend - 2) << 16), gx_base + DC_FP_V_TIMING);
+ write32(gx_base + DC_V_TIMING_3, (vsyncstart - 1) | ((vsyncend - 1) << 16));
+ write32(gx_base + DC_FP_V_TIMING, (vsyncstart - 2) | ((vsyncend - 2) << 16));
}
/**
@@ -369,14 +369,14 @@ static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
*/
static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
{
- writel(0x00000080, gx_base + DC_GENERAL_CFG);
+ write32(gx_base + DC_GENERAL_CFG, 0x00000080);
mdelay(1);
dc_setup_layout(gx_base,mode);
dc_setup_timing(gx_base,mode);
- writel(0x2000C581, gx_base + DC_GENERAL_CFG);
- writel(0x0000002F, gx_base + DC_TIMING_CFG);
- writel(0x00003004, gx_base + DC_OUTPUT_CFG);
+ write32(gx_base + DC_GENERAL_CFG, 0x2000C581);
+ write32(gx_base + DC_TIMING_CFG, 0x0000002F);
+ write32(gx_base + DC_OUTPUT_CFG, 0x00003004);
}
/**
@@ -392,7 +392,7 @@ static void cs5530_activate_video(void *io_base, const struct video_mode *mode)
u32 val;
val = (u32)mode->sync_pol << 8;
- writel(val | 0x0020002F, io_base + CS5530_DISPLAY_CONFIG);
+ write32(io_base + CS5530_DISPLAY_CONFIG, val | 0x0020002F);
}
#if CONFIG_SPLASH_GRAPHIC == 1
@@ -465,7 +465,7 @@ static void cs5530_vga_init(device_t dev)
cs5530_set_clock_frequency(io_base, mode->pll_value);
- writel(DC_UNLOCK_MAGIC, gx_base + DC_UNLOCK);
+ write32(gx_base + DC_UNLOCK, DC_UNLOCK_MAGIC);
show_boot_splash_16(mode->visible_pixel, mode->visible_lines,
mode->visible_pixel * (COLOUR_DEPTH>>3), (void*)(GX_BASE + 0x800000));
@@ -473,7 +473,7 @@ static void cs5530_vga_init(device_t dev)
cs5530_activate_mode(gx_base, mode);
cs5530_activate_video(io_base, mode);
- writel(0x00000000, gx_base + DC_UNLOCK);
+ write32(gx_base + DC_UNLOCK, 0x00000000);
}
static struct device_operations vga_ops = {
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index 002335d6b2..89e0cf5951 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -428,10 +428,10 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
/* Make HCCPARAMS writeable */
- writel(readl(bar + IPREG04) | USB_HCCPW_SET, bar + IPREG04);
+ write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET);
/* ; EECP=50h, IST=01h, ASPC=1 */
- writel(0x00005012, bar + HCCPARAMS);
+ write32(bar + HCCPARAMS, 0x00005012);
}
dev = dev_find_device(PCI_VENDOR_ID_AMD,
@@ -439,19 +439,19 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
if (dev) {
bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- writel(readl(bar + UOCMUX) & PUEN_SET, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) & PUEN_SET);
/* Host or Device? */
if (sb->enable_USBP4_device) {
- writel(readl(bar + UOCMUX) | PMUX_DEVICE, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_DEVICE);
} else {
- writel(readl(bar + UOCMUX) | PMUX_HOST, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_HOST);
}
/* Overcurrent configuration */
if (sb->enable_USBP4_overcurrent) {
- writel(readl(bar + UOCCAP)
- | sb->enable_USBP4_overcurrent, bar + UOCCAP);
+ write32(bar + UOCCAP, read32(bar + UOCCAP)
+ | sb->enable_USBP4_overcurrent);
}
}
@@ -467,8 +467,8 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
if (dev) {
bar = (uint8_t *) pci_read_config32(dev,
PCI_BASE_ADDRESS_0);
- writel(readl(bar + UDCDEVCTL) | UDC_SD_SET,
- bar + UDCDEVCTL);
+ write32(bar + UDCDEVCTL,
+ read32(bar + UDCDEVCTL) | UDC_SD_SET);
}
@@ -477,8 +477,8 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
if (dev) {
bar = (uint8_t *) pci_read_config32(dev,
PCI_BASE_ADDRESS_0);
- writel(readl(bar + UOCCTL) | PADEN_SET, bar + UOCCTL);
- writel(readl(bar + UOCCAP) | APU_SET, bar + UOCCAP);
+ write32(bar + UOCCTL, read32(bar + UOCCTL) | PADEN_SET);
+ write32(bar + UOCCAP, read32(bar + UOCCAP) | APU_SET);
}
}
diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c
index 4c17c04bbb..3d24825c63 100644
--- a/src/southbridge/amd/sb600/sb600_hda.c
+++ b/src/southbridge/amd/sb600/sb600_hda.c
@@ -37,10 +37,10 @@ static int set_bits(u8 * port, u32 mask, u32 val)
/* Write (val & ~mask) to port */
val &= mask;
- dword = readl(port);
+ dword = read32(port);
dword &= ~mask;
dword |= val;
- writel(dword, port);
+ write32(port, dword);
/* Wait for readback of register to
* match what was just written to it
@@ -49,7 +49,7 @@ static int set_bits(u8 * port, u32 mask, u32 val)
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
- dword = readl(port);
+ dword = read32(port);
dword &= mask;
} while ((dword != val) && --count);
@@ -75,7 +75,7 @@ static u32 codec_detect(u8 * base)
mdelay(1);
/* Read in Codec location (BAR + 0xe)[3..0]*/
- dword = readl(base + 0xe);
+ dword = read32(base + 0xe);
dword &= 0x0F;
if (!dword)
goto no_codec;
@@ -180,7 +180,7 @@ static int wait_for_ready(u8 *base)
int timeout = 50;
while(timeout--) {
- u32 dword=readl(base + HDA_ICII_REG);
+ u32 dword=read32(base + HDA_ICII_REG);
if (!(dword & HDA_ICII_BUSY))
return 0;
udelay(1);
@@ -202,7 +202,7 @@ static int wait_for_valid(u8 *base)
int timeout = 50;
while(timeout--) {
- u32 dword = readl(base + HDA_ICII_REG);
+ u32 dword = read32(base + HDA_ICII_REG);
if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
@@ -224,12 +224,12 @@ static void codec_init(u8 * base, int addr)
return;
dword = (addr << 28) | 0x000f0000;
- writel(dword, base + 0x60);
+ write32(base + 0x60, dword);
if (wait_for_valid(base) == -1)
return;
- dword = readl(base + 0x64);
+ dword = read32(base + 0x64);
/* 2 */
printk_debug("codec viddid: %08x\n", dword);
@@ -246,7 +246,7 @@ static void codec_init(u8 * base, int addr)
if (wait_for_ready(base) == -1)
return;
- writel(verb[i], base + 0x60);
+ write32(base + 0x60, verb[i]);
if (wait_for_valid(base) == -1)
return;
diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c
index 3d7f2c416c..b0074b70e3 100644
--- a/src/southbridge/amd/sb600/sb600_sata.c
+++ b/src/southbridge/amd/sb600/sb600_sata.c
@@ -172,7 +172,7 @@ static void sata_init(struct device *dev)
/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
for (i = 0; i < 4; i++) {
- byte = readb(sata_bar5 + 0x128 + 0x80 * i);
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
printk_spew("SATA port %i status = %x\n", i, byte);
byte &= 0xF;
@@ -182,24 +182,24 @@ static void sata_init(struct device *dev)
printk_spew("SATA device detected but not talking. Trying lower speed.\n");
/* Read in Port-N Serial ATA Control Register */
- byte = readb(sata_bar5 + 0x12C + 0x80 * i);
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
/* Set Reset Bit and 1.5g bit */
byte |= 0x11;
- writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
/* Wait 1ms */
mdelay(1);
/* Clear Reset Bit */
byte &= ~0x01;
- writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
/* Wait 1ms */
mdelay(1);
/* Reread status */
- byte = readb(sata_bar5 + 0x128 + 0x80 * i);
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
printk_spew("SATA port %i status = %x\n", i, byte);
byte &= 0xF;
}
@@ -223,15 +223,15 @@ static void sata_init(struct device *dev)
/* Below is CIM InitSataLateFar */
/* Enable interrupts from the HBA */
- byte = readb(sata_bar5 + 0x4);
+ byte = read8(sata_bar5 + 0x4);
byte |= 1 << 1;
- writeb(byte, (sata_bar5 + 0x4));
+ write8((sata_bar5 + 0x4), byte);
/* Clear error status */
- writel(0xFFFFFFFF, (sata_bar5 + 0x130));
- writel(0xFFFFFFFF, (sata_bar5 + 0x1b0));
- writel(0xFFFFFFFF, (sata_bar5 + 0x230));
- writel(0xFFFFFFFF, (sata_bar5 + 0x2b0));
+ write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
@@ -241,7 +241,7 @@ static void sata_init(struct device *dev)
/* byte = pm_ioread(0x29); */
/* word |= byte<<8; */
/* printk_debug("AcpiGpe0Blk addr = %x\n", word); */
- /* writel(0x80000000 , word); */
+ /* write32(word, 0x80000000); */
}
static struct pci_operations lops_pci = {
diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c
index 2002114f81..4be2d73272 100644
--- a/src/southbridge/amd/sb600/sb600_usb.c
+++ b/src/southbridge/amd/sb600/sb600_usb.c
@@ -98,16 +98,16 @@ static void usb_init2(struct device *dev)
/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
dword = 0x00020F00;
- writel(dword, usb2_bar0 + 0xC0);
+ write32(usb2_bar0 + 0xC0, dword);
/* RPR5.5 Sets In/OUT FIFO threshold for best performance */
dword = 0x00200040;
- writel(dword, usb2_bar0 + 0xA4);
+ write32(usb2_bar0 + 0xA4, dword);
/* RPR5.9 Disable the EHCI Dynamic Power Saving feature */
- word = readl(usb2_bar0 + 0xBC);
+ word = read16(usb2_bar0 + 0xBC);
word &= ~(1 << 12);
- writew(word, usb2_bar0 + 0xBC);
+ write16(usb2_bar0 + 0xBC, word);
/* RPR5.10 Disable EHCI MSI support */
byte = pci_read_config8(dev, 0x50);