summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/bd82x6x/me.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/bd82x6x/me.c')
-rw-r--r--src/southbridge/intel/bd82x6x/me.c388
1 files changed, 5 insertions, 383 deletions
diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c
index 1c56e5ebd0..3a1ba55cec 100644
--- a/src/southbridge/intel/bd82x6x/me.c
+++ b/src/southbridge/intel/bd82x6x/me.c
@@ -27,304 +27,8 @@
#include <vendorcode/google/chromeos/gnvs.h>
#endif
-/* Path that the BIOS should take based on ME state */
-static const char *me_bios_path_values[] __unused = {
- [ME_NORMAL_BIOS_PATH] = "Normal",
- [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
- [ME_ERROR_BIOS_PATH] = "Error",
- [ME_RECOVERY_BIOS_PATH] = "Recovery",
- [ME_DISABLE_BIOS_PATH] = "Disable",
- [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
-};
-
-/* MMIO base address for MEI interface */
-static u32 *mei_base_address;
-
-static void mei_dump(void *ptr, int dword, int offset, const char *type)
-{
- struct mei_csr *csr;
-
- if (!CONFIG(DEBUG_INTEL_ME))
- return;
-
- printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
-
- switch (offset) {
- case MEI_H_CSR:
- case MEI_ME_CSR_HA:
- csr = ptr;
- if (!csr) {
- printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
- break;
- }
- printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
- "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
- csr->buffer_read_ptr, csr->buffer_write_ptr,
- csr->ready, csr->reset, csr->interrupt_generate,
- csr->interrupt_status, csr->interrupt_enable);
- break;
- case MEI_ME_CB_RW:
- case MEI_H_CB_WW:
- printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
- break;
- default:
- printk(BIOS_SPEW, "0x%08x\n", offset);
- break;
- }
-}
-
-/*
- * ME/MEI access helpers using memcpy to avoid aliasing.
- */
-
-static inline void mei_read_dword_ptr(void *ptr, int offset)
-{
- u32 dword = read32(mei_base_address + (offset/sizeof(u32)));
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "READ");
-}
-
-static inline void mei_write_dword_ptr(void *ptr, int offset)
-{
- u32 dword = 0;
- memcpy(&dword, ptr, sizeof(dword));
- write32(mei_base_address + (offset/sizeof(u32)), dword);
- mei_dump(ptr, dword, offset, "WRITE");
-}
-
-#ifndef __SIMPLE_DEVICE__
-static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset)
-{
- u32 dword = pci_read_config32(dev, offset);
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "PCI READ");
-}
-#endif
-
-static inline void read_host_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void write_host_csr(struct mei_csr *csr)
-{
- mei_write_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void read_me_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
-}
-
-static inline void write_cb(u32 dword)
-{
- write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword);
- mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
-}
-
-static inline u32 read_cb(void)
-{
- u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32)));
- mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
- return dword;
-}
-
-/* Wait for ME ready bit to be asserted */
-static int mei_wait_for_me_ready(void)
-{
- struct mei_csr me;
- unsigned int try = ME_RETRY;
-
- while (try--) {
- read_me_csr(&me);
- if (me.ready)
- return 0;
- udelay(ME_DELAY);
- }
-
- printk(BIOS_ERR, "ME: failed to become ready\n");
- return -1;
-}
-
-static void mei_reset(void)
-{
- struct mei_csr host;
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Reset host and ME circular buffers for next message */
- read_host_csr(&host);
- host.reset = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Re-init and indicate host is ready */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-}
-
-static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data)
-{
- struct mei_csr host;
- unsigned int ndata, n;
- u32 *data;
-
- /* Number of dwords to write, ignoring MKHI */
- ndata = mei->length >> 2;
-
- /* Pad non-dword aligned request message length */
- if (mei->length & 3)
- ndata++;
- if (!ndata) {
- printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
- return -1;
- }
- ndata++; /* Add MEI header */
-
- /*
- * Make sure there is still room left in the circular buffer.
- * Reset the buffer pointers if the requested message will not fit.
- */
- read_host_csr(&host);
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
- mei_reset();
- read_host_csr(&host);
- }
-
- /*
- * This implementation does not handle splitting large messages
- * across multiple transactions. Ensure the requested length
- * will fit in the available circular buffer depth.
- */
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
- ndata + 2, host.buffer_depth);
- return -1;
- }
-
- /* Write MEI header */
- mei_write_dword_ptr(mei, MEI_H_CB_WW);
- ndata--;
-
- /* Write MKHI header */
- mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
- ndata--;
-
- /* Write message data */
- data = req_data;
- for (n = 0; n < ndata; ++n)
- write_cb(*data++);
-
- /* Generate interrupt to the ME */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- /* Make sure ME is ready after sending request data */
- return mei_wait_for_me_ready();
-}
-
-static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes)
-{
- struct mei_header mei_rsp;
- struct mkhi_header mkhi_rsp;
- struct mei_csr me, host;
- unsigned int ndata, n;
- unsigned int expected;
- u32 *data;
-
- /* Total number of dwords to read from circular buffer */
- expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
- if (rsp_bytes & 3)
- expected++;
-
- /*
- * The interrupt status bit does not appear to indicate that the
- * message has actually been received. Instead we wait until the
- * expected number of dwords are present in the circular buffer.
- */
- for (n = ME_RETRY; n; --n) {
- read_me_csr(&me);
- if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
- break;
- udelay(ME_DELAY);
- }
- if (!n) {
- printk(BIOS_ERR, "ME: timeout waiting for data: expected "
- "%u, available %u\n", expected,
- me.buffer_write_ptr - me.buffer_read_ptr);
- return -1;
- }
-
- /* Read and verify MEI response header from the ME */
- mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
- if (!mei_rsp.is_complete) {
- printk(BIOS_ERR, "ME: response is not complete\n");
- return -1;
- }
-
- /* Handle non-dword responses and expect at least MKHI header */
- ndata = mei_rsp.length >> 2;
- if (mei_rsp.length & 3)
- ndata++;
- if (ndata != (expected - 1)) {
- printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
- ndata, (expected - 1));
- return -1;
- }
-
- /* Read and verify MKHI response header from the ME */
- mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
- if (!mkhi_rsp.is_response ||
- mkhi->group_id != mkhi_rsp.group_id ||
- mkhi->command != mkhi_rsp.command) {
- printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, "
- "command %u ?= %u, is_response %u\n", mkhi->group_id,
- mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
- mkhi_rsp.is_response);
- return -1;
- }
- ndata--; /* MKHI header has been read */
-
- /* Make sure caller passed a buffer with enough space */
- if (ndata != (rsp_bytes >> 2)) {
- printk(BIOS_ERR, "ME: not enough room in response buffer: "
- "%u != %u\n", ndata, rsp_bytes >> 2);
- return -1;
- }
-
- /* Read response data from the circular buffer */
- data = rsp_data;
- for (n = 0; n < ndata; ++n)
- *data++ = read_cb();
-
- /* Tell the ME that we have consumed the response */
- read_host_csr(&host);
- host.interrupt_status = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- return mei_wait_for_me_ready();
-}
-
-static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data, void *rsp_data, int rsp_bytes)
-{
- if (mei_send_msg(mei, mkhi, req_data) < 0)
- return -1;
- if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0)
- return -1;
- return 0;
-}
+/* FIXME: For verification purposes only */
+#include "me_common.c"
/* Send END OF POST message to the ME */
static int __unused mkhi_end_of_post(void)
@@ -438,11 +142,10 @@ static void intel_me7_finalize_smm(void)
struct me_hfs hfs;
u32 reg32;
- mei_base_address = (u32 *)
- (pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf);
+ update_mei_base_address();
/* S3 path will have hidden this device already */
- if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0)
+ if (!is_mei_base_address_valid())
return;
/* Make sure ME is in a mode that expects EOP */
@@ -548,94 +251,13 @@ static me_bios_path intel_me_path(struct device *dev)
return path;
}
-/* Prepare ME for MEI messages */
-static int intel_mei_setup(struct device *dev)
-{
- struct resource *res;
- struct mei_csr host;
-
- /* Find the MMIO base for the ME interface */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res || res->base == 0 || res->size == 0) {
- printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
- return -1;
- }
- mei_base_address = (u32 *)(uintptr_t)res->base;
-
- /* Ensure Memory and Bus Master bits are set */
- pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
- /* Clean up status for next message */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-
- return 0;
-}
-
-/* Read the Extend register hash of ME firmware */
-static int intel_me_extend_valid(struct device *dev)
-{
- struct me_heres status;
- u32 extend[8] = {0};
- int i, count = 0;
-
- pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
- if (!status.extend_feature_present) {
- printk(BIOS_ERR, "ME: Extend Feature not present\n");
- return -1;
- }
-
- if (!status.extend_reg_valid) {
- printk(BIOS_ERR, "ME: Extend Register not valid\n");
- return -1;
- }
-
- switch (status.extend_reg_algorithm) {
- case PCI_ME_EXT_SHA1:
- count = 5;
- printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
- break;
- case PCI_ME_EXT_SHA256:
- count = 8;
- printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
- break;
- default:
- printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
- status.extend_reg_algorithm);
- return -1;
- }
-
- for (i = 0; i < count; ++i) {
- extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
- printk(BIOS_DEBUG, "%08x", extend[i]);
- }
- printk(BIOS_DEBUG, "\n");
-
-#if CONFIG(CHROMEOS)
- /* Save hash in NVS for the OS to verify */
- chromeos_set_me_hash(extend, count);
-#endif
-
- return 0;
-}
-
-/* Hide the ME virtual PCI devices */
-static void intel_me_hide(struct device *dev)
-{
- dev->enabled = 0;
- pch_enable(dev);
-}
-
/* Check whether ME is present and do basic init */
static void intel_me_init(struct device *dev)
{
me_bios_path path = intel_me_path(dev);
/* Do initial setup and determine the BIOS path */
- printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
+ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_get_bios_path_string(path));
switch (path) {
case ME_S3WAKE_BIOS_PATH: