summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/fsp_rangeley
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/fsp_rangeley')
-rw-r--r--src/southbridge/intel/fsp_rangeley/Kconfig63
-rw-r--r--src/southbridge/intel/fsp_rangeley/Makefile.inc38
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi.c201
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl185
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h61
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl491
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl43
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/lpc.asl230
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/pcie.asl169
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl29
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/sata.asl81
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl30
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/smbus.asl240
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/soc.asl276
-rw-r--r--src/southbridge/intel/fsp_rangeley/acpi/usb.asl52
-rw-r--r--src/southbridge/intel/fsp_rangeley/chip.h88
-rw-r--r--src/southbridge/intel/fsp_rangeley/early_init.c79
-rw-r--r--src/southbridge/intel/fsp_rangeley/early_smbus.c61
-rw-r--r--src/southbridge/intel/fsp_rangeley/early_spi.c114
-rw-r--r--src/southbridge/intel/fsp_rangeley/early_usb.c47
-rw-r--r--src/southbridge/intel/fsp_rangeley/gpio.c108
-rw-r--r--src/southbridge/intel/fsp_rangeley/gpio.h128
-rw-r--r--src/southbridge/intel/fsp_rangeley/irq.h166
-rw-r--r--src/southbridge/intel/fsp_rangeley/lpc.c478
-rw-r--r--src/southbridge/intel/fsp_rangeley/nvs.h156
-rw-r--r--src/southbridge/intel/fsp_rangeley/pci_devs.h137
-rw-r--r--src/southbridge/intel/fsp_rangeley/reset.c34
-rw-r--r--src/southbridge/intel/fsp_rangeley/romstage.c143
-rw-r--r--src/southbridge/intel/fsp_rangeley/romstage.h39
-rw-r--r--src/southbridge/intel/fsp_rangeley/sata.c135
-rw-r--r--src/southbridge/intel/fsp_rangeley/smbus.c99
-rw-r--r--src/southbridge/intel/fsp_rangeley/smbus.h99
-rw-r--r--src/southbridge/intel/fsp_rangeley/soc.c99
-rw-r--r--src/southbridge/intel/fsp_rangeley/soc.h452
-rw-r--r--src/southbridge/intel/fsp_rangeley/spi.c753
-rw-r--r--src/southbridge/intel/fsp_rangeley/watchdog.c56
36 files changed, 0 insertions, 5660 deletions
diff --git a/src/southbridge/intel/fsp_rangeley/Kconfig b/src/southbridge/intel/fsp_rangeley/Kconfig
deleted file mode 100644
index 2c8ceacd9a..0000000000
--- a/src/southbridge/intel/fsp_rangeley/Kconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2011 Google Inc.
-## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc.
-##
-
-config SOUTHBRIDGE_INTEL_FSP_RANGELEY
- bool
-
-if SOUTHBRIDGE_INTEL_FSP_RANGELEY
-
-config SOUTH_BRIDGE_OPTIONS # dummy
- def_bool y
- select IOAPIC
- select HAVE_HARD_RESET
- select HAVE_USBDEBUG
- select USE_WATCHDOG_ON_BOOT
- select PCIEXP_ASPM
- select PCIEXP_COMMON_CLOCK
- select SPI_FLASH
- select HAVE_INTEL_FIRMWARE
-
-config EHCI_BAR
- hex
- default 0xfef00000
-
-config EHCI_DEBUG_OFFSET
- hex
- default 0xa0
-
-config SERIRQ_CONTINUOUS_MODE
- bool
- default n
- help
- If you set this option to y, the serial IRQ machine will be
- operated in continuous mode.
-
-config HPET_MIN_TICKS
- hex
- default 0x80
-
-config IFD_BIN_PATH
- string
- depends on HAVE_IFD_BIN
- default "../intel/mainboard/intel/rangeley"
- help
- The path and filename to the descriptor.bin file.
-
-endif
diff --git a/src/southbridge/intel/fsp_rangeley/Makefile.inc b/src/southbridge/intel/fsp_rangeley/Makefile.inc
deleted file mode 100644
index 2a66b90ec8..0000000000
--- a/src/southbridge/intel/fsp_rangeley/Makefile.inc
+++ /dev/null
@@ -1,38 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2010 Google Inc.
-## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc.
-##
-
-ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY),y)
-
-ramstage-y += soc.c
-ramstage-y += lpc.c
-ramstage-y += sata.c
-ramstage-y += reset.c
-ramstage-y += watchdog.c
-ramstage-y += spi.c
-ramstage-y += smbus.c
-ramstage-y += acpi.c
-
-romstage-y += early_usb.c early_smbus.c gpio.c reset.c early_spi.c early_init.c
-romstage-y += romstage.c
-
-romstage-$(CONFIG_USBDEBUG) += usb_debug.c
-ramstage-$(CONFIG_USBDEBUG) += usb_debug.c
-
-endif
diff --git a/src/southbridge/intel/fsp_rangeley/acpi.c b/src/southbridge/intel/fsp_rangeley/acpi.c
deleted file mode 100644
index 18e5a8a3b9..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <string.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <arch/acpi.h>
-#include <southbridge/intel/fsp_rangeley/soc.h>
-#include <arch/io.h>
-
-#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
-#include <cpu/x86/smm.h>
-#endif
-
-/**
- * Fill in the FADT with generic values that can be overridden later.
- */
-
-typedef struct southbridge_intel_fsp_rangeley_config config_t;
-
-void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
-{
- acpi_header_t *header = &(fadt->header);
- struct device *lpcdev = dev_find_slot(SOC_LPC_DEVFN);
- u16 pmbase = pci_read_config16(lpcdev, ABASE) & 0xfff0;
- config_t *config = lpcdev->chip_info;
-
- memset((void *) fadt, 0, sizeof(acpi_fadt_t));
-
- /*
- * Reference section 5.2.9 Fixed ACPI Description Table (FADT)
- * in the ACPI 3.0b specification.
- */
-
- /* FADT Header Structure */
- memcpy(header->signature, "FACP", 4);
- header->length = sizeof(acpi_fadt_t);
- header->revision = ACPI_FADT_REV_ACPI_3_0;
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = 1;
-
- /* ACPI Pointers */
- fadt->firmware_ctrl = (unsigned long) facs;
- fadt->dsdt = (unsigned long) dsdt;
-
- fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */
- fadt->preferred_pm_profile = config->fadt_pm_profile; /* unknown is default */
-
- /* System Management */
- fadt->sci_int = 0x09;
- fadt->smi_cmd = 0x00; /* disable SMM */
- fadt->acpi_enable = 0x00; /* unused if SMI_CMD = 0 */
- fadt->acpi_disable = 0x00; /* unused if SMI_CMD = 0 */
-
- /* Enable ACPI */
- outl(inl(pmbase + PM1_CNT) | SCI_EN, pmbase + PM1_CNT);
-
- /* Power Control */
- fadt->s4bios_req = 0x00;
- fadt->pstate_cnt = 0x00;
-
- /* Control Registers - Base Address */
- fadt->pm1a_evt_blk = pmbase + PM1_STS;
- fadt->pm1b_evt_blk = 0x00; /* Not Used */
- fadt->pm1a_cnt_blk = pmbase + PM1_CNT;
- fadt->pm1b_cnt_blk = 0x00; /* Not Used */
- fadt->pm2_cnt_blk = pmbase + PM2A_CNT_BLK;
- fadt->pm_tmr_blk = pmbase + PM1_TMR;
- fadt->gpe0_blk = pmbase + GPE0_STS;
- fadt->gpe1_blk = 0x00; /* Not Used */
-
- /* Control Registers - Length */
- fadt->pm1_evt_len = 4; /* 32 bits */
- fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */
- fadt->pm2_cnt_len = 1; /* 8 bits */
- fadt->pm_tmr_len = 4; /* 32 bits */
- fadt->gpe0_blk_len = 8; /* 64 bits */
- fadt->gpe1_blk_len = 0;
- fadt->gpe1_base = 0;
- fadt->cst_cnt = 0;
- fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED;
- fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED;
- fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */
- fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */
- fadt->duty_offset = 1;
- fadt->duty_width = 0;
-
- /* RTC Registers */
- fadt->day_alrm = 0x0D;
- fadt->mon_alrm = 0x00;
- fadt->century = 0x00;
- fadt->iapc_boot_arch = config->fadt_boot_arch; /* legacy free default */
-
- fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
- ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
- ACPI_FADT_RESET_REGISTER | ACPI_FADT_SLEEP_TYPE |
- ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
-
- /* Reset Register */
- fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->reset_reg.bit_width = 8;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- fadt->reset_reg.addrl = 0xCF9;
- fadt->reset_reg.addrh = 0x00;
- fadt->reset_value = 6;
-
- /* Reserved Bits */
- fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
- fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
- fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
-
- /* Extended ACPI Pointers */
- fadt->x_firmware_ctl_l = (unsigned long)facs;
- fadt->x_firmware_ctl_h = 0x00;
- fadt->x_dsdt_l = (unsigned long)dsdt;
- fadt->x_dsdt_h = 0x00;
-
- /* PM1 Status & PM1 Enable */
- fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk;
- fadt->x_pm1a_evt_blk.addrh = 0x00;
-
- fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1b_evt_blk.bit_width = 0;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.access_size = 0;
- fadt->x_pm1b_evt_blk.addrl = fadt->pm1b_evt_blk;
- fadt->x_pm1b_evt_blk.addrh = 0x00;
-
- /* PM1 Control Registers */
- fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
- fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk;
- fadt->x_pm1a_cnt_blk.addrh = 0x00;
-
- fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1b_cnt_blk.bit_width = 0;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.access_size = 0;
- fadt->x_pm1b_cnt_blk.addrl = fadt->pm1b_cnt_blk;
- fadt->x_pm1b_cnt_blk.addrh = 0x00;
-
- /* PM2 Control Registers */
- fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm2_cnt_blk.bit_width = 8;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk;
- fadt->x_pm2_cnt_blk.addrh = 0x00;
-
- /* PM1 Timer Register */
- fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk;
- fadt->x_pm_tmr_blk.addrh = 0x00;
-
- /* General-Purpose Event Registers */
- fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + EventEnable */
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_gpe0_blk.addrl = fadt->gpe0_blk;
- fadt->x_gpe0_blk.addrh = 0x00;
-
- fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_gpe1_blk.bit_width = 0;
- fadt->x_gpe1_blk.bit_offset = 0;
- fadt->x_gpe1_blk.access_size = 0;
- fadt->x_gpe1_blk.addrl = fadt->gpe1_blk;
- fadt->x_gpe1_blk.addrh = 0x00;
-
- header->checksum =
- acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl b/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl
deleted file mode 100644
index 1cb12cfae1..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2012 The Chromium OS Authors
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* Global Variables */
-
-Name(\PICM, 0) // IOAPIC/8259
-Name(\DSEN, 1) // Display Output Switching Enable
-
-/* Global ACPI memory region. This region is used for passing information
- * between coreboot (aka "the system bios"), ACPI, and the SMI handler.
- * Since we don't know where this will end up in memory at ACPI compile time,
- * we have to fix it up in coreboot's ACPI creation phase.
- */
-
-
-External(NVSA)
-OperationRegion (GNVS, SystemMemory, NVSA, 0xf00)
-Field (GNVS, ByteAcc, NoLock, Preserve)
-{
- /* Miscellaneous */
- Offset (0x00),
- OSYS, 16, // 0x00 - Operating System
- SMIF, 8, // 0x02 - SMI function
- PRM0, 8, // 0x03 - SMI function parameter
- PRM1, 8, // 0x04 - SMI function parameter
- SCIF, 8, // 0x05 - SCI function
- PRM2, 8, // 0x06 - SCI function parameter
- PRM3, 8, // 0x07 - SCI function parameter
- LCKF, 8, // 0x08 - Global Lock function for EC
- PRM4, 8, // 0x09 - Lock function parameter
- PRM5, 8, // 0x0a - Lock function parameter
- P80D, 32, // 0x0b - Debug port (IO 0x80) value
- LIDS, 8, // 0x0f - LID state (open = 1)
- PWRS, 8, // 0x10 - Power State (AC = 1)
- /* Processor Identification */
- Offset (0x28),
- APIC, 8, // 0x28 - APIC Enabled by coreboot
- MPEN, 8, // 0x29 - Multi Processor Enable
- PCP0, 8, // 0x2a - PDC CPU/CORE 0
- PCP1, 8, // 0x2b - PDC CPU/CORE 1
- PPCM, 8, // 0x2c - Max. PPC state
- PCNT, 8, // 0x2d - Processor count
- /* Super I/O & CMOS config */
- Offset (0x32),
- NATP, 8, // 0x32 -
- S5U0, 8, // 0x33 - Enable USB0 in S5
- S5U1, 8, // 0x34 - Enable USB1 in S5
- S3U0, 8, // 0x35 - Enable USB0 in S3
- S3U1, 8, // 0x36 - Enable USB1 in S3
- S33G, 8, // 0x37 - Enable 3G in S3
- CMEM, 32, // 0x38 - CBMEM TOC
- /* Integrated Graphics Device */
- Offset (0x3c),
- IGDS, 8, // 0x3c - IGD state (primary = 1)
- TLST, 8, // 0x3d - Display Toggle List pointer
- CADL, 8, // 0x3e - Currently Attached Devices List
- PADL, 8, // 0x3f - Previously Attached Devices List
- CSTE, 16, // 0x40 - Current display state
- NSTE, 16, // 0x42 - Next display state
- SSTE, 16, // 0x44 - Set display state
- Offset (0x46),
- NDID, 8, // 0x46 - Number of Device IDs
- DID1, 32, // 0x47 - Device ID 1
- DID2, 32, // 0x4b - Device ID 2
- DID3, 32, // 0x4f - Device ID 3
- DID4, 32, // 0x53 - Device ID 4
- DID5, 32, // 0x57 - Device ID 5
- /* Backlight Control */
- Offset (0x64),
- BLCS, 8, // 0x64 - Backlight control possible?
- BRTL, 8, // 0x65 - Brightness Level
- ODDS, 8, // 0x66
- /* Ambient Light Sensors */
- Offset (0x6e),
- ALSE, 8, // 0x6e - ALS enable
- ALAF, 8, // 0x6f - Ambient light adjustment factor
- LLOW, 8, // 0x70 - LUX Low
- LHIH, 8, // 0x71 - LUX High
- /* EMA */
- Offset (0x78),
- EMAE, 8, // 0x78 - EMA enable
- EMAP, 16, // 0x79 - EMA pointer
- EMAL, 16, // 0x7b - EMA length
- /* MEF */
- Offset (0x82),
- MEFE, 8, // 0x82 - MEF enable
- /* TPM support */
- Offset (0x8c),
- TPMP, 8, // 0x8c - TPM
- TPME, 8, // 0x8d - TPM enable
- /* SATA */
- Offset (0x96),
- GTF0, 56, // 0x96 - GTF task file buffer for port 0
- GTF1, 56, // 0x9d - GTF task file buffer for port 1
- GTF2, 56, // 0xa4 - GTF task file buffer for port 2
- IDEM, 8, // 0xab - IDE mode (compatible / enhanced)
- IDET, 8, // 0xac - IDE
- /* IGD OpRegion */
- Offset (0xb4),
- ASLB, 32, // 0xb4 - IGD OpRegion Base Address
- IBTT, 8, // 0xb8 - IGD boot panel device
- IPAT, 8, // 0xb9 - IGD panel type cmos option
- ITVF, 8, // 0xba - IGD TV format cmos option
- ITVM, 8, // 0xbb - IGD TV minor format option
- IPSC, 8, // 0xbc - IGD panel scaling
- IBLC, 8, // 0xbd - IGD BLC config
- IBIA, 8, // 0xbe - IGD BIA config
- ISSC, 8, // 0xbf - IGD SSC config
- I409, 8, // 0xc0 - IGD 0409 modified settings
- I509, 8, // 0xc1 - IGD 0509 modified settings
- I609, 8, // 0xc2 - IGD 0609 modified settings
- I709, 8, // 0xc3 - IGD 0709 modified settings
- IDMM, 8, // 0xc4 - IGD Power conservation feature
- IDMS, 8, // 0xc5 - IGD DVMT memory size
- IF1E, 8, // 0xc6 - IGD function 1 enable
- HVCO, 8, // 0xc7 - IGD HPLL VCO
- NXD1, 32, // 0xc8 - IGD _DGS next DID1
- NXD2, 32, // 0xcc - IGD _DGS next DID2
- NXD3, 32, // 0xd0 - IGD _DGS next DID3
- NXD4, 32, // 0xd4 - IGD _DGS next DID4
- NXD5, 32, // 0xd8 - IGD _DGS next DID5
- NXD6, 32, // 0xdc - IGD _DGS next DID6
- NXD7, 32, // 0xe0 - IGD _DGS next DID7
- NXD8, 32, // 0xe4 - IGD _DGS next DID8
-
- ISCI, 8, // 0xe8 - IGD SMI/SCI mode (0: SCI)
- PAVP, 8, // 0xe9 - IGD PAVP data
- Offset (0xeb),
- OSCC, 8, // 0xeb - PCIe OSC control
- NPCE, 8, // 0xec - native pcie support
- PLFL, 8, // 0xed - platform flavor
- BREV, 8, // 0xee - board revision
- DPBM, 8, // 0xef - digital port b mode
- DPCM, 8, // 0xf0 - digital port c mode
- DPDM, 8, // 0xf1 - digital port d mode
- ALFP, 8, // 0xf2 - active lfp
- IMON, 8, // 0xf3 - current graphics turbo imon value
- MMIO, 8, // 0xf4 - 64bit mmio support
-}
-
-/* Set flag to enable USB charging in S3 */
-Method (S3UE)
-{
- Store (One, \S3U0)
- Store (One, \S3U1)
-}
-
-/* Set flag to disable USB charging in S3 */
-Method (S3UD)
-{
- Store (Zero, \S3U0)
- Store (Zero, \S3U1)
-}
-
-/* Set flag to enable USB charging in S5 */
-Method (S5UE)
-{
- Store (One, \S5U0)
- Store (One, \S5U1)
-}
-
-/* Set flag to disable USB charging in S5 */
-Method (S5UD)
-{
- Store (Zero, \S5U0)
- Store (Zero, \S5U1)
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h b/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h
deleted file mode 100644
index bf1f6c0bf2..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronics Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/*
- * This file intentionally gets included multiple times, to set pic and apic
- * modes, so should not have guard statements added.
- */
-
-/*
- * This file will use irqroute.asl and mainboard/irqroute.h
- * to generate the ACPI IRQ routing for the mainboard being compiled.
- * This method uses #defines in irqroute.h along with the macros contained
- * in this file to generate an IRQ routing for each PCI device in the system.
- */
-#undef PCI_DEV_PIRQ_ROUTES
-#undef ACPI_DEV_IRQ
-#undef PCI_DEV_PIRQ_ROUTE
-#undef PIRQ_PIC_ROUTES
-#undef PIRQ_PIC
-#undef IRQROUTE_H
-
-#if defined(PIC_MODE)
-
-#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
- Package() { ## dev_ ## ffff, pin_, \_SB.PCI0.LPCB.LNK ## pin_name_, 0 }
-
-#else /* defined(PIC_MODE) */
-
-#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
- Package() { ## dev_ ## ffff, pin_, 0, PIRQ ## pin_name_ ## _APIC_IRQ }
-
-#endif
-
-#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
- ACPI_DEV_IRQ(dev_, 0, a_), \
- ACPI_DEV_IRQ(dev_, 1, b_), \
- ACPI_DEV_IRQ(dev_, 2, c_), \
- ACPI_DEV_IRQ(dev_, 3, d_)
-
-/* Empty PIRQ_PIC definition. */
-#define PIRQ_PIC(pirq_, pic_irq_)
-
-/* Include the mainboard irq route definition */
-#include "irqroute.h"
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl
deleted file mode 100644
index acc03f0ceb..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-Device (LNKA)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 1)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTA)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLA, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLA, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTA
- ShiftLeft(1, And(PRTA, 0x0f), IRQ0)
-
- Return (RTLA)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTA)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTA, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKB)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 2)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTB)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLB, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLB, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTB
- ShiftLeft(1, And(PRTB, 0x0f), IRQ0)
-
- Return (RTLB)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTB)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTB, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKC)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 3)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTC)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLC, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLC, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTC
- ShiftLeft(1, And(PRTC, 0x0f), IRQ0)
-
- Return (RTLC)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTC)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTC, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKD)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 4)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTD)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLD, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLD, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTD
- ShiftLeft(1, And(PRTD, 0x0f), IRQ0)
-
- Return (RTLD)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTD)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTD, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKE)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 5)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTE)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLE, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLE, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTE
- ShiftLeft(1, And(PRTE, 0x0f), IRQ0)
-
- Return (RTLE)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTE)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTE, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKF)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 6)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTF)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLF, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLF, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTF
- ShiftLeft(1, And(PRTF, 0x0f), IRQ0)
-
- Return (RTLF)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTF)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTF, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKG)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 7)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTG)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLG, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLG, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTG
- ShiftLeft(1, And(PRTG, 0x0f), IRQ0)
-
- Return (RTLG)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTG)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTG, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKH)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 8)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTH)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLH, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLH, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTH
- ShiftLeft(1, And(PRTH, 0x0f), IRQ0)
-
- Return (RTLH)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTH)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTH, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl
deleted file mode 100644
index 75eb76c423..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-// PCI Interrupt Routing
-Method(_PRT)
-{
- /*
- * PICM comes from _PIC, which returns the following:
- * 0 – PIC mode
- * 1 – APIC mode
- * 2 – SAPIC mode
- */
- If (PICM) {
- Return (Package() {
- #undef PIC_MODE
- #include "irq_helper.h"
- PCI_DEV_PIRQ_ROUTES
- })
- } Else {
- Return (Package() {
- #define PIC_MODE
- #include "irq_helper.h"
- PCI_DEV_PIRQ_ROUTES
- })
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl b/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl
deleted file mode 100644
index fce5449744..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-// Intel LPC Bus Device - 0:1f.0
-
-Device (LPCB)
-{
- Name(_ADR, 0x001f0000)
-
- OperationRegion(LPC0, PCI_Config, 0x00, 0x100)
- Field (LPC0, AnyAcc, NoLock, Preserve)
- {
- Offset (0x40),
- PMBS, 16, // ABASE
- Offset (0x60), // Interrupt Routing Registers
- PRTA, 8,
- PRTB, 8,
- PRTC, 8,
- PRTD, 8,
- Offset (0x68),
- PRTE, 8,
- PRTF, 8,
- PRTG, 8,
- PRTH, 8,
-
- Offset (0x80), // IO Decode Ranges
- IOD0, 8,
- IOD1, 8,
-
- Offset (0xb8), // GPIO Routing Control
- GR00, 2,
- GR01, 2,
- GR02, 2,
- GR03, 2,
- GR04, 2,
- GR05, 2,
- GR06, 2,
- GR07, 2,
- GR08, 2,
- GR09, 2,
- GR10, 2,
- GR11, 2,
- GR12, 2,
- GR13, 2,
- GR14, 2,
- GR15, 2,
-
- Offset (0xf0), // RCBA
- RCEN, 1,
- , 13,
- RCBA, 18,
- }
-
- #include "irqlinks.asl"
-
- #include "acpi/ec.asl"
-
- Device (DMAC) // DMA Controller
- {
- Name(_HID, EISAID("PNP0200"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x00, 0x00, 0x01, 0x20)
- IO (Decode16, 0x81, 0x81, 0x01, 0x11)
- IO (Decode16, 0x93, 0x93, 0x01, 0x0d)
- IO (Decode16, 0xc0, 0xc0, 0x01, 0x20)
- DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 }
- })
- }
-
- Device (FWH) // Firmware Hub
- {
- Name (_HID, EISAID("INT0800"))
- Name (_CRS, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
- })
- }
-
- Device (HPET)
- {
- Name (_HID, EISAID("PNP0103"))
- Name (_CID, 0x010CD041)
-
- Name(BUF0, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0)
- })
-
- Method (_STA, 0) // Device Status
- {
- If (HPTE) {
- // Note: Ancient versions of Windows don't want
- // to see the HPET in order to work right
- If (LGreaterEqual(OSYS, 2001)) {
- Return (0xf) // Enable and show device
- } Else {
- Return (0xb) // Enable and don't show device
- }
- }
-
- Return (0x0) // Not enabled, don't show.
- }
-
- Method (_CRS, 0, Serialized) // Current resources
- {
- If (HPTE) {
- CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0)
- If (Lequal(HPAS, 1)) {
- Store(0xfed01000, HPT0)
- }
-
- If (Lequal(HPAS, 2)) {
- Store(0xfed02000, HPT0)
- }
-
- If (Lequal(HPAS, 3)) {
- Store(0xfed03000, HPT0)
- }
- }
-
- Return (BUF0)
- }
- }
-
- Device(PIC) // 8259 Interrupt Controller
- {
- Name(_HID,EISAID("PNP0000"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x20, 0x20, 0x01, 0x02)
- IO (Decode16, 0x24, 0x24, 0x01, 0x02)
- IO (Decode16, 0x28, 0x28, 0x01, 0x02)
- IO (Decode16, 0x2c, 0x2c, 0x01, 0x02)
- IO (Decode16, 0x30, 0x30, 0x01, 0x02)
- IO (Decode16, 0x34, 0x34, 0x01, 0x02)
- IO (Decode16, 0x38, 0x38, 0x01, 0x02)
- IO (Decode16, 0x3c, 0x3c, 0x01, 0x02)
- IO (Decode16, 0xa0, 0xa0, 0x01, 0x02)
- IO (Decode16, 0xa4, 0xa4, 0x01, 0x02)
- IO (Decode16, 0xa8, 0xa8, 0x01, 0x02)
- IO (Decode16, 0xac, 0xac, 0x01, 0x02)
- IO (Decode16, 0xb0, 0xb0, 0x01, 0x02)
- IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
- IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
- IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
- IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
- IRQNoFlags () { 2 }
- })
- }
-
- Device(MATH) // FPU
- {
- Name (_HID, EISAID("PNP0C04"))
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0xf0, 0xf0, 0x01, 0x01)
- IRQNoFlags() { 13 }
- })
- }
-
- Device(LDRC) // LPC device: Resource consumption
- {
- Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 2)
-
- Name (RBUF, ResourceTemplate()
- {
- IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO
- IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO
- IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
- IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
- IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
- //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap
- IO (Decode16, DEFAULT_ABASE, DEFAULT_ABASE, 0x1, 0x80) // ICH7-M ACPI
- IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO
- })
-
- Method (_CRS, 0, NotSerialized)
- {
- Return (RBUF)
- }
- }
-
- Device (RTC) // Real Time Clock
- {
- Name (_HID, EISAID("PNP0B00"))
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x70, 0x70, 1, 8)
-// Disable as Windows doesn't like it, and systems don't seem to use it.
-// IRQNoFlags() { 8 }
- })
- }
-
- Device (TIMR) // Intel 8254 timer
- {
- Name(_HID, EISAID("PNP0100"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x40, 0x40, 0x01, 0x04)
- IO (Decode16, 0x50, 0x50, 0x10, 0x04)
- IRQNoFlags() {0}
- })
- }
-
- // Include mainboard's superio.asl file.
- #include "acpi/superio.asl"
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl
deleted file mode 100644
index 68f22b8591..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* Intel 6/7 Series PCH PCIe support */
-
-// PCI Express Ports
-
-Method (IRQM, 1, Serialized) {
-
- /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */
- Name (IQAA, Package() {
- Package() { 0x0000ffff, 0, 0, 16 },
- Package() { 0x0000ffff, 1, 0, 17 },
- Package() { 0x0000ffff, 2, 0, 18 },
- Package() { 0x0000ffff, 3, 0, 19 } })
- Name (IQAP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } })
-
- /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */
- Name (IQBA, Package() {
- Package() { 0x0000ffff, 0, 0, 17 },
- Package() { 0x0000ffff, 1, 0, 18 },
- Package() { 0x0000ffff, 2, 0, 19 },
- Package() { 0x0000ffff, 3, 0, 16 } })
- Name (IQBP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } })
-
- /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */
- Name (IQCA, Package() {
- Package() { 0x0000ffff, 0, 0, 18 },
- Package() { 0x0000ffff, 1, 0, 19 },
- Package() { 0x0000ffff, 2, 0, 16 },
- Package() { 0x0000ffff, 3, 0, 17 } })
- Name (IQCP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } })
-
- /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */
- Name (IQDA, Package() {
- Package() { 0x0000ffff, 0, 0, 19 },
- Package() { 0x0000ffff, 1, 0, 16 },
- Package() { 0x0000ffff, 2, 0, 17 },
- Package() { 0x0000ffff, 3, 0, 18 } })
- Name (IQDP, Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } })
-
- Switch (ToInteger (Arg0)) {
- /* PCIe Root Port 1 */
- Case (Package() { 1 }) {
- If (PICM) {
- Return (IQAA)
- } Else {
- Return (IQAP)
- }
- }
-
- /* PCIe Root Port 2 */
- Case (Package() { 2 }) {
- If (PICM) {
- Return (IQBA)
- } Else {
- Return (IQBP)
- }
- }
-
- /* PCIe Root Port 3 */
- Case (Package() { 3 }) {
- If (PICM) {
- Return (IQCA)
- } Else {
- Return (IQCP)
- }
- }
-
- /* PCIe Root Port 4 */
- Case (Package() { 4 }) {
- If (PICM) {
- Return (IQDA)
- } Else {
- Return (IQDP)
- }
- }
-
- Default {
- If (PICM) {
- Return (IQDA)
- } Else {
- Return (IQDP)
- }
- }
- }
-}
-
-Device (RP01)
-{
- Name (_ADR, 0x00010000)
-
- #include "pcie_port.asl"
-
- Method (_PRT)
- {
- Return (IRQM (RPPN))
- }
-}
-
-Device (RP02)
-{
- Name (_ADR, 0x00020000)
-
- #include "pcie_port.asl"
-
- Method (_PRT)
- {
- Return (IRQM (RPPN))
- }
-}
-
-Device (RP03)
-{
- Name (_ADR, 0x00030000)
-
- #include "pcie_port.asl"
-
- Method (_PRT)
- {
- Return (IRQM (RPPN))
- }
-}
-
-Device (RP04)
-{
- Name (_ADR, 0x00040000)
-
- #include "pcie_port.asl"
-
- Method (_PRT)
- {
- Return (IRQM (RPPN))
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl
deleted file mode 100644
index 276227bb50..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* Included in each PCIe Root Port device */
-
-OperationRegion (RPCS, PCI_Config, 0x00, 0xFF)
-Field (RPCS, AnyAcc, NoLock, Preserve)
-{
- Offset (0x4c), // Link Capabilities
- , 24,
- RPPN, 8, // Root Port Number
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sata.asl b/src/southbridge/intel/fsp_rangeley/acpi/sata.asl
deleted file mode 100644
index ec167159e0..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/sata.asl
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-// Intel SATA Controller 0:17.0
-
-// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily
-// pluggable
-
-Device (SATA)
-{
- Name (_ADR, 0x00170000)
-
- Device (PRID)
- {
- Name (_ADR, 0)
-
- // Get Timing Mode
- Method (_GTM)
- {
- Name(PBUF, Buffer(20) {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00 })
-
- CreateDwordField (PBUF, 0, PIO0)
- CreateDwordField (PBUF, 4, DMA0)
- CreateDwordField (PBUF, 8, PIO1)
- CreateDwordField (PBUF, 12, DMA1)
- CreateDwordField (PBUF, 16, FLAG)
-
- // TODO fill return structure
-
- Return (PBUF)
- }
-
- // Set Timing Mode
- Method (_STM, 3)
- {
- CreateDwordField (Arg0, 0, PIO0)
- CreateDwordField (Arg0, 4, DMA0)
- CreateDwordField (Arg0, 8, PIO1)
- CreateDwordField (Arg0, 12, DMA1)
- CreateDwordField (Arg0, 16, FLAG)
-
- // TODO: Do the deed
- }
-
- Device (DSK0)
- {
- Name (_ADR, 0)
- // TODO: _RMV ?
- // TODO: _GTF ?
- }
-
- Device (DSK1)
- {
- Name (_ADR, 1)
-
- // TODO: _RMV ?
- // TODO: _GTF ?
- }
-
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl b/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl
deleted file mode 100644
index aabb397144..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-Name(\_S0, Package(){0x0,0x0,0x0,0x0})
-
-/*
- * S1 and S3 sleep states are not supported
- * Name(\_S1, Package(){0x1,0x1,0x0,0x0})
- * Name(\_S3, Package(){0x5,0x5,0x0,0x0})
- */
-
-Name(\_S4, Package(){0x6,0x6,0x0,0x0})
-Name(\_S5, Package(){0x7,0x7,0x0,0x0})
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl b/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl
deleted file mode 100644
index efd323dea5..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-// Intel SMBus Controller 0:1f.3
-
-Device (SBUS)
-{
- Name (_ADR, 0x001f0003)
-
-#ifdef ENABLE_SMBUS_METHODS
- OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
- Field(SMBP, DWordAcc, NoLock, Preserve)
- {
- Offset(0x40),
- , 2,
- I2CE, 1
- }
-
- OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20)
- Field (SMBI, ByteAcc, NoLock, Preserve)
- {
- HSTS, 8, // Host Status
- , 8,
- HCNT, 8, // Host Control
- HCMD, 8, // Host Command
- TXSA, 8, // Transmit Slave Address
- DAT0, 8, // Host Data 0
- DAT1, 8, // Host Data 1
- HBDB, 8, // Host Block Data Byte
- PECK, 8, // Packet Error Check
- RXSA, 8, // Receive Slave Address
- RXDA, 16, // Receive Slave Data
- AUXS, 8, // Auxiliary Status
- AUXC, 8, // Auxiliary Control
- SLPC, 8, // SMLink Pin Control
- SBPC, 8, // SMBus Pin Control
- SSTS, 8, // Slave Status
- SCMD, 8, // Slave Command
- NADR, 8, // Notify Device Address
- NDLB, 8, // Notify Data Low Byte
- NDLH, 8, // Notify Data High Byte
- }
-
- // Kill all SMBus communication
- Method (KILL, 0, Serialized)
- {
- Or (HCNT, 0x02, HCNT) // Send Kill
- Or (HSTS, 0xff, HSTS) // Clean Status
- }
-
- // Check if last operation completed
- // return Failure = 0, Success = 1
- Method (CMPL, 0, Serialized)
- {
- Store (4000, Local0) // Timeout 200ms in 50us steps
- While (Local0) {
- If (And(HSTS, 0x02)) { // Completion Status?
- Return (1) // Operation Completed
- } Else {
- Stall (50)
- Decrement (Local0)
- If (LEqual(Local0, 0)) {
- KILL()
- }
- }
- }
-
- Return (0) // Failure
- }
-
-
- // Wait for SMBus to become ready
- Method (SRDY, 0, Serialized)
- {
- Store (200, Local0) // Timeout 200ms
- While (Local0) {
- If (And(HSTS, 0x40)) { // IN_USE?
- Sleep(1) // Wait 1ms
- Decrement(Local0) // timeout--
- If (LEqual(Local0, 0)) {
- Return (1)
- }
- } Else {
- Store (0, Local0) // We're ready
- }
- }
-
- Store (4000, Local0) // Timeout 200ms (50us * 4000)
- While (Local0) {
- If (And (HSTS, 0x01)) { // Host Busy?
- Stall(50) // Wait 50us
- Decrement(Local0) // timeout--
- If (LEqual(Local0, 0)) {
- KILL()
- }
- } Else {
- Return (0) // Success
- }
- }
-
- Return (1) // Failure
- }
-
- // SMBus Send Byte
- // Arg0: Address
- // Arg1: Data
- // Return: 1 = Success, 0=Failure
-
- Method (SSXB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0)
- }
-
- // Send Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Arg0, TXSA) // Write Address
- Store (Arg1, HCMD) // Write Data
-
- Store (0x48, HCNT) // Start + Byte Data Protocol
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (1) // Success
- }
-
- Return (0)
- }
-
-
- // SMBus Receive Byte
- // Arg0: Address
- // Return: 0xffff = Failure, Data (8bit) = Success
-
- Method (SRXB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0xffff)
- }
-
- // Receive Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Or (Arg0, 1), TXSA) // Write Address
-
- Store (0x44, HCNT) // Start
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (DAT0) // Success
- }
-
- Return (0xffff)
- }
-
-
- // SMBus Write Byte
- // Arg0: Address
- // Arg1: Command
- // Arg2: Data
- // Return: 1 = Success, 0=Failure
-
- Method (SWRB, 3, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0)
- }
-
- // Send Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Arg0, TXSA) // Write Address
- Store (Arg1, HCMD) // Write Command
- Store (Arg2, DAT0) // Write Data
-
- Store (0x48, HCNT) // Start + Byte Protocol
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (1) // Success
- }
-
- Return (0)
- }
-
-
- // SMBus Read Byte
- // Arg0: Address
- // Arg1: Command
- // Return: 0xffff = Failure, Data (8bit) = Success
-
- Method (SRDB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0xffff)
- }
-
- // Receive Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Or (Arg0, 1), TXSA) // Write Address
- Store (Arg1, HCMD) // Command
-
- Store (0x48, HCNT) // Start
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (DAT0) // Success
- }
-
- Return (0xffff)
- }
-#endif
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/soc.asl b/src/southbridge/intel/fsp_rangeley/acpi/soc.asl
deleted file mode 100644
index 77cd7ae488..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/soc.asl
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* Intel Rangeley support */
-
-#include "../soc.h"
-
-Scope(\)
-{
- // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
-
- OperationRegion(IO_T, SystemIO, 0x800, 0x10)
- Field(IO_T, ByteAcc, NoLock, Preserve)
- {
- Offset(0x8),
- TRP0, 8 // IO-Trap at 0x808
- }
-
-#if IS_ENABLED(CONFIG_ACPI_INCLUDE_PMIO)
- // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l)
- OperationRegion(PMIO, SystemIO, DEFAULT_ABASE, 0x80)
- Field(PMIO, ByteAcc, NoLock, Preserve)
- {
- Offset(0x20), // GPE0_STS
- , 16,
- GS00, 1, // GPIO00 SCI/Wake Status
- GS01, 1, // GPIO01 SCI/Wake Status
- GS02, 1, // GPIO02 SCI/Wake Status
- GS03, 1, // GPIO03 SCI/Wake Status
- GS04, 1, // GPIO04 SCI/Wake Status
- GS05, 1, // GPIO05 SCI/Wake Status
- GS06, 1, // GPIO06 SCI/Wake Status
- GS07, 1, // GPIO07 SCI/Wake Status
- GS08, 1, // GPIO08 SCI/Wake Status
- GS09, 1, // GPIO09 SCI/Wake Status
- GS10, 1, // GPIO10 SCI/Wake Status
- GS11, 1, // GPIO11 SCI/Wake Status
- GS12, 1, // GPIO12 SCI/Wake Status
- GS13, 1, // GPIO13 SCI/Wake Status
- GS14, 1, // GPIO14 SCI/Wake Status
- GS15, 1, // GPIO15 SCI/Wake Status
- Offset(0x28), // GPE0_EN
- , 16,
- GE00, 1, // GPIO00 SCI/Wake Enable
- GE01, 1, // GPIO01 SCI/Wake Enable
- GE02, 1, // GPIO02 SCI/Wake Enable
- GE03, 1, // GPIO03 SCI/Wake Enable
- GE04, 1, // GPIO04 SCI/Wake Enable
- GE05, 1, // GPIO05 SCI/Wake Enable
- GE06, 1, // GPIO06 SCI/Wake Enable
- GE07, 1, // GPIO07 SCI/Wake Enable
- GE08, 1, // GPIO08 SCI/Wake Enable
- GE09, 1, // GPIO09 SCI/Wake Enable
- GE10, 1, // GPIO10 SCI/Wake Enable
- GE11, 1, // GPIO11 SCI/Wake Enable
- GE12, 1, // GPIO12 SCI/Wake Enable
- GE13, 1, // GPIO13 SCI/Wake Enable
- GE14, 1, // GPIO14 SCI/Wake Enable
- GE15, 1, // GPIO15 SCI/Wake Enable
- Offset(0x42), // General Purpose Control
- , 1, // skip 1 bit
- GPEC, 1, // SWGPE_CTRL
- }
-#endif
-
-#if IS_ENABLED(CONFIG_ACPI_INCLUDE_GPIO)
- // GPIO IO mapped registers (0x1f.0 reg 0x48.l)
- OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c)
- Field(GPIO, ByteAcc, NoLock, Preserve)
- {
- Offset(0x00), // GPIO Use Select
- GU00, 8,
- GU01, 8,
- GU02, 8,
- GU03, 8,
- Offset(0x04), // GPIO IO Select
- GIO0, 8,
- GIO1, 8,
- GIO2, 8,
- GIO3, 8,
- Offset(0x0c), // GPIO Level
- GL00, 1,
- GP01, 1,
- GP02, 1,
- GP0e, 1,
- GP04, 1,
- GP05, 1,
- GP06, 1,
- GP07, 1,
- GP08, 1,
- GP09, 1,
- GP10, 1,
- GP11, 1,
- GP12, 1,
- GP13, 1,
- GP14, 1,
- GP15, 1,
- GP16, 1,
- GP17, 1,
- GP18, 1,
- GP19, 1,
- GP20, 1,
- GP21, 1,
- GP22, 1,
- GP23, 1,
- GP24, 1,
- GP25, 1,
- GP26, 1,
- GP27, 1,
- GP28, 1,
- GP29, 1,
- GP30, 1,
- GP31, 1,
- Offset(0x18), // GPIO Blink
- GB00, 8,
- GB01, 8,
- GB02, 8,
- GB03, 8,
- Offset(0x2c), // GPIO Invert
- GIV0, 8,
- GIV1, 8,
- GIV2, 8,
- GIV3, 8,
- Offset(0x30), // GPIO Use Select 2
- GU04, 8,
- GU05, 8,
- GU06, 8,
- GU07, 8,
- Offset(0x34), // GPIO IO Select 2
- GIO4, 8,
- GIO5, 8,
- GIO6, 8,
- GIO7, 8,
- Offset(0x38), // GPIO Level 2
- GP32, 1,
- GP33, 1,
- GP34, 1,
- GP35, 1,
- GP36, 1,
- GP37, 1,
- GP38, 1,
- GP39, 1,
- GP40, 1,
- GP41, 1,
- GP42, 1,
- GP43, 1,
- GP44, 1,
- GP45, 1,
- GP46, 1,
- GP47, 1,
- GP48, 1,
- GP49, 1,
- GP50, 1,
- GP51, 1,
- GP52, 1,
- GP53, 1,
- GP54, 1,
- GP55, 1,
- GP56, 1,
- GP57, 1,
- GP58, 1,
- GP59, 1,
- GP60, 1,
- GP61, 1,
- GP62, 1,
- GP63, 1,
- Offset(0x40), // GPIO Use Select 3
- GU08, 8,
- GU09, 4,
- Offset(0x44), // GPIO IO Select 3
- GIO8, 8,
- GIO9, 4,
- Offset(0x48), // GPIO Level 3
- GP64, 1,
- GP65, 1,
- GP66, 1,
- GP67, 1,
- GP68, 1,
- GP69, 1,
- GP70, 1,
- GP71, 1,
- GP72, 1,
- GP73, 1,
- GP74, 1,
- GP75, 1,
- }
-#endif
-
- // ICH7 Root Complex Register Block. Memory Mapped through RCBA)
- OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000)
- Field(RCRB, DWordAcc, Lock, Preserve)
- {
- Offset(0x0000), // Backbone
- Offset(0x1000), // Chipset
- Offset(0x3000), // Legacy Configuration Registers
- Offset(0x3404), // High Performance Timer Configuration
- HPAS, 2, // Address Select
- , 5,
- HPTE, 1, // Address Enable
- Offset(0x3418), // FD (Function Disable)
- , 1, // Reserved
- PCID, 1, // PCI bridge disable
- SA1D, 1, // SATA1 disable
- SMBD, 1, // SMBUS disable
- HDAD, 1, // Azalia disable
- , 8, // Reserved
- EH2D, 1, // EHCI #2 disable
- LPBD, 1, // LPC bridge disable
- EH1D, 1, // EHCI #1 disable
- RP1D, 1, // Root Port 1 disable
- RP2D, 1, // Root Port 2 disable
- RP3D, 1, // Root Port 3 disable
- RP4D, 1, // Root Port 4 disable
- TTRD, 1, // Thermal sensor registers disable
- SA2D, 1, // SATA2 disable
- Offset(0x3428), // FD2 (Function Disable 2)
- BDFD, 1, // Display BDF
- ME1D, 1, // ME Interface 1 disable
- ME2D, 1, // ME Interface 2 disable
- IDRD, 1, // IDE redirect disable
- KTCT, 1, // Keyboard Text redirect disable
- }
-}
-
-// PCI Express Ports 0:[1-4].0
-#include "pcie.asl"
-
-// USB 0:16.0
-#include "usb.asl"
-
-// LPC Bridge 0:1f.0
-#include "lpc.asl"
-
-// SATA 0:17.0
-#include "sata.asl"
-
-// SMBus 0:1f.3
-#include "smbus.asl"
-
-// IRQ routing for each PCI device
-#include "irqroute.asl"
-
-Method (_OSC, 4)
-{
- /* Check for proper GUID */
- If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
- {
- /* Let OS control everything */
- Return (Arg3)
- }
- Else
- {
- /* Unrecognized UUID */
- CreateDWordField (Arg3, 0, CDW1)
- Or (CDW1, 4, CDW1)
- Return (Arg3)
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/usb.asl b/src/southbridge/intel/fsp_rangeley/acpi/usb.asl
deleted file mode 100644
index 274a570f80..0000000000
--- a/src/southbridge/intel/fsp_rangeley/acpi/usb.asl
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* Intel Rangeley USB support */
-
-// EHCI Controller 0:16.0
-
-Device (EHC1)
-{
- Name(_ADR, 0x00160000)
-
- Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
- Device (HUB7)
- {
- Name (_ADR, 0x00000000)
-
- Device (PRT1) { Name (_ADR, 1) } // USB Port 0
- Device (PRT2) { Name (_ADR, 2) } // USB Port 1
- Device (PRT3) { Name (_ADR, 3) } // USB Port 2
- Device (PRT4) { Name (_ADR, 4) } // USB Port 3
- }
-}
diff --git a/src/southbridge/intel/fsp_rangeley/chip.h b/src/southbridge/intel/fsp_rangeley/chip.h
deleted file mode 100644
index 790270023a..0000000000
--- a/src/southbridge/intel/fsp_rangeley/chip.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H
-#define SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H
-
-#include <arch/acpi.h>
-
-struct southbridge_intel_fsp_rangeley_config {
-
- /**
- * GPI Routing configuration
- *
- * Only the lower two bits have a meaning:
- * 00: No effect
- * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- * 10: SCI (if corresponding GPIO_EN bit is also set)
- * 11: reserved
- */
- uint8_t gpi0_routing;
- uint8_t gpi1_routing;
- uint8_t gpi2_routing;
- uint8_t gpi3_routing;
- uint8_t gpi4_routing;
- uint8_t gpi5_routing;
- uint8_t gpi6_routing;
- uint8_t gpi7_routing;
- uint8_t gpi8_routing;
- uint8_t gpi9_routing;
- uint8_t gpi10_routing;
- uint8_t gpi11_routing;
- uint8_t gpi12_routing;
- uint8_t gpi13_routing;
- uint8_t gpi14_routing;
- uint8_t gpi15_routing;
-
- uint32_t gpe0_en;
- uint16_t alt_gp_smi_en;
-
- /* IDE configuration */
- uint32_t ide_legacy_combined;
- uint32_t sata_ahci;
- uint8_t sata_port_map;
- uint32_t sata_port0_gen3_tx;
- uint32_t sata_port1_gen3_tx;
-
- uint32_t gen1_dec;
- uint32_t gen2_dec;
- uint32_t gen3_dec;
- uint32_t gen4_dec;
-
- /* Enable linear PCIe Root Port function numbers starting at zero */
- uint8_t pcie_port_coalesce;
-
- /* Override PCIe ASPM */
- uint8_t pcie_aspm_f0;
- uint8_t pcie_aspm_f1;
- uint8_t pcie_aspm_f2;
- uint8_t pcie_aspm_f3;
- uint8_t pcie_aspm_f4;
- uint8_t pcie_aspm_f5;
- uint8_t pcie_aspm_f6;
- uint8_t pcie_aspm_f7;
-
- /* ACPI configuration */
- uint8_t fadt_pm_profile;
- uint16_t fadt_boot_arch;
-
-};
-
-#endif /* SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H */
diff --git a/src/southbridge/intel/fsp_rangeley/early_init.c b/src/southbridge/intel/fsp_rangeley/early_init.c
deleted file mode 100644
index 448cbeb410..0000000000
--- a/src/southbridge/intel/fsp_rangeley/early_init.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2010 coresystems GmbH
- * Copyright (C) 2011 Google Inc
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <stdint.h>
-#include <stdlib.h>
-#include <console/console.h>
-#include <arch/io.h>
-#include <device/pci_def.h>
-#include <pc80/mc146818rtc.h>
-#include <version.h>
-#include <device/pci_def.h>
-#include "pci_devs.h"
-#include "soc.h"
-
-static void rangeley_setup_bars(void)
-{
- /* Setting up Southbridge. */
- printk(BIOS_DEBUG, "Setting up static southbridge registers...");
- pci_write_config32(LPC_BDF, RCBA, (uintptr_t)DEFAULT_RCBA | RCBA_ENABLE);
- pci_write_config32(LPC_BDF, ABASE, DEFAULT_ABASE | SET_BAR_ENABLE);
- pci_write_config32(LPC_BDF, PBASE, DEFAULT_PBASE | SET_BAR_ENABLE);
- printk(BIOS_DEBUG, " done.\n");
-
- printk(BIOS_DEBUG, "Disabling Watchdog timer...");
- /* Disable the watchdog reboot and turn off the watchdog timer */
- write8((void *)(DEFAULT_PBASE + PMC_CFG),
- read8((void *)(DEFAULT_PBASE + PMC_CFG)) | NO_REBOOT); // disable reboot on timer trigger
- outw(DEFAULT_ABASE + TCO1_CNT, inw(DEFAULT_ABASE + TCO1_CNT) |
- TCO_TMR_HALT); // disable watchdog timer
-
- printk(BIOS_DEBUG, " done.\n");
-
-}
-
-static void reset_rtc(void)
-{
- uint32_t pbase = pci_read_config32(LPC_BDF, PBASE) &
- 0xfffffff0;
- uint32_t gen_pmcon1 = read32((void *)(pbase + GEN_PMCON1));
- int rtc_failed = !!(gen_pmcon1 & RPS);
-
- if (rtc_failed) {
- printk(BIOS_DEBUG,
- "RTC Failure detected. Resetting Date to %s\n",
- coreboot_dmi_date);
-
- /* Clear the power failure flag */
- write32((void *)(DEFAULT_PBASE + GEN_PMCON1),
- gen_pmcon1 & ~RPS);
- }
-
- cmos_init(rtc_failed);
-}
-
-void rangeley_sb_early_initialization(void)
-{
- /* Setup all BARs required for early PCIe and raminit */
- rangeley_setup_bars();
-
- reset_rtc();
-}
diff --git a/src/southbridge/intel/fsp_rangeley/early_smbus.c b/src/southbridge/intel/fsp_rangeley/early_smbus.c
deleted file mode 100644
index f46f5e9812..0000000000
--- a/src/southbridge/intel/fsp_rangeley/early_smbus.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include "soc.h"
-#include "smbus.h"
-
-void enable_smbus(void)
-{
- device_t dev;
-
- /* Set the SMBus device statically. */
- dev = PCI_DEV(0x0, 0x1f, 0x3);
-
- /* Check to make sure we've got the right device. */
- if (pci_read_config16(dev, 0x0) != 0x8086) {
- die("SMBus controller not found!");
- }
-
- /* Set SMBus I/O base. */
- pci_write_config32(dev, SMB_BASE,
- SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
-
- /* Set SMBus enable. */
- pci_write_config8(dev, HOSTC, HST_EN);
-
- /* Set SMBus I/O space enable. */
- pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
-
- /* Disable interrupt generation. */
- outb(0, SMBUS_IO_BASE + SMBHSTCTL);
-
- /* Clear any lingering errors, so transactions can run. */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
- printk(BIOS_DEBUG, "SMBus controller enabled.\n");
-}
-
-int smbus_read_byte(unsigned device, unsigned address)
-{
- return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
diff --git a/src/southbridge/intel/fsp_rangeley/early_spi.c b/src/southbridge/intel/fsp_rangeley/early_spi.c
deleted file mode 100644
index 26495e0152..0000000000
--- a/src/southbridge/intel/fsp_rangeley/early_spi.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Google Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include <delay.h>
-#include "soc.h"
-
-#define SPI_DELAY 10 /* 10us */
-#define SPI_RETRY 200000 /* 2s */
-
-static int early_spi_read_block(u32 offset, u8 size, u8 *buffer)
-{
- u32 *ptr32 = (u32*)buffer;
- u32 i;
-
- /* Clear status bits */
- RCBA16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR |
- SPIBAR_HSFS_FDONE;
-
- if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
- printk(BIOS_ERR, "SPI ERROR: transaction in progress\n");
- return -1;
- }
-
- /* Set flash address */
- RCBA32(SPIBAR_FADDR) = offset;
-
- /* Setup read transaction */
- RCBA16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) |
- SPIBAR_HSFC_CYCLE_READ;
-
- /* Start transaction */
- RCBA16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO;
-
- /* Wait for completion */
- for (i = 0; i < SPI_RETRY; i++) {
- if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) {
- /* Cycle in progress, wait 1ms */
- udelay(SPI_DELAY);
- continue;
- }
-
- if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) {
- printk(BIOS_ERR, "SPI ERROR: Access Error\n");
- return -1;
-
- }
-
- if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) {
- printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n");
- return -1;
- }
- break;
- }
-
- if (i >= SPI_RETRY) {
- printk(BIOS_ERR, "SPI ERROR: Timeout\n");
- return -1;
- }
-
- /* Read the data */
- for (i = 0; i < size; i+=sizeof(u32)) {
- if (size-i >= 4) {
- /* reading >= dword */
- *ptr32++ = RCBA32(SPIBAR_FDATA(i/sizeof(u32)));
- } else {
- /* reading < dword */
- u8 j, *ptr8 = (u8*)ptr32;
- u32 temp = RCBA32(SPIBAR_FDATA(i/sizeof(u32)));
- for (j = 0; j < (size-i); j++) {
- *ptr8++ = temp & 0xff;
- temp >>= 8;
- }
- }
- }
-
- return size;
-}
-
-int early_spi_read(u32 offset, u32 size, u8 *buffer)
-{
- u32 current = 0;
-
- while (size > 0) {
- u8 count = (size < 64) ? size : 64;
- if (early_spi_read_block(offset + current, count,
- buffer + current) < 0)
- return -1;
- size -= count;
- current += count;
- }
-
- return 0;
-}
diff --git a/src/southbridge/intel/fsp_rangeley/early_usb.c b/src/southbridge/intel/fsp_rangeley/early_usb.c
deleted file mode 100644
index d5071c9abe..0000000000
--- a/src/southbridge/intel/fsp_rangeley/early_usb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include "soc.h"
-
-#define SOC_EHCI1_TEMP_BAR0 0xe8000000
-
-/*
- * Setup USB controller MMIO BAR to prevent the
- * reference code from resetting the controller.
- *
- * The BAR will be re-assigned during device
- * enumeration so these are only temporary.
- */
-void enable_usb_bar(void)
-{
- device_t usb0 = SOC_EHCI1_DEV;
- u32 cmd;
-
- /* USB Controller 0 */
- pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
- SOC_EHCI1_TEMP_BAR0);
- cmd = pci_read_config32(usb0, PCI_COMMAND);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb0, PCI_COMMAND, cmd);
-}
diff --git a/src/southbridge/intel/fsp_rangeley/gpio.c b/src/southbridge/intel/fsp_rangeley/gpio.c
deleted file mode 100644
index a0f6f0f394..0000000000
--- a/src/southbridge/intel/fsp_rangeley/gpio.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <arch/io.h>
-
-#include "soc.h"
-#include "gpio.h"
-
-#define MAX_GPIO_NUMBER 31 /* zero based */
-
-void setup_soc_gpios(const struct soc_gpio_map *gpio)
-{
- u16 gpiobase = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf;
- u32 *cfiobase = (u32 *)(pci_read_config32(SOC_LPC_DEV, IOBASE) & ~0xf);
- u32 cfio_cnt = 0;
-
-
- /* GPIO */
- if (gpio->core.level)
- outl(*((u32*)gpio->core.level), gpiobase + GPIO_SC_GP_LVL);
- if (gpio->core.mode)
- outl(*((u32*)gpio->core.mode), gpiobase + GPIO_SC_USE_SEL);
- if (gpio->core.direction)
- outl(*((u32*)gpio->core.direction), gpiobase + GPIO_SC_IO_SEL);
- if (gpio->core.tpe)
- outl(*((u32*)gpio->core.tpe), gpiobase + GPIO_SC_TPE);
- if (gpio->core.tne)
- outl(*((u32*)gpio->core.tne), gpiobase + GPIO_SC_TNE);
- if (gpio->core.ts)
- outl(*((u32*)gpio->core.ts), gpiobase + GPIO_SC_TS);
-
- /* GPIO SUS Well Set 1 */
- if (gpio->sus.level)
- outl(*((u32*)gpio->sus.level), gpiobase + GPIO_SUS_GP_LVL);
- if (gpio->sus.mode)
- outl(*((u32*)gpio->sus.mode), gpiobase + GPIO_SUS_USE_SEL);
- if (gpio->sus.direction)
- outl(*((u32*)gpio->sus.direction), gpiobase + GPIO_SUS_IO_SEL);
- if (gpio->sus.tpe)
- outl(*((u32*)gpio->sus.tpe), gpiobase + GPIO_SUS_TPE);
- if (gpio->sus.tne)
- outl(*((u32*)gpio->sus.tne), gpiobase + GPIO_SUS_TNE);
- if (gpio->sus.ts)
- outl(*((u32*)gpio->sus.ts), gpiobase + GPIO_SUS_TS);
- if (gpio->sus.we)
- outl(*((u32*)gpio->sus.we), gpiobase + GPIO_SUS_WE);
-
- /* GPIO PAD Settings */
- /* CFIO Core Well Set 1 */
- if ((gpio->core.cfio_init != NULL) || (gpio->core.cfio_entrynum != 0)) {
- write32(cfiobase + (0x0700 / sizeof(u32)), (u32)0x01001002);
- for(cfio_cnt = 0; cfio_cnt < gpio->core.cfio_entrynum; cfio_cnt++) {
- if (!((u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0))
- continue;
- write32(cfiobase + ((CFIO_PAD_CONF0 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0);
- write32(cfiobase + ((CFIO_PAD_CONF1 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_1);
- write32(cfiobase + ((CFIO_PAD_VAL + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_val);
- write32(cfiobase + ((CFIO_PAD_DFT + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_dft);
- }
- write32(cfiobase + (0x0700 / sizeof(u32)), (u32)0x01041002);
- }
-
- /* CFIO SUS Well Set 1 */
- if ((gpio->sus.cfio_init != NULL) || (gpio->sus.cfio_entrynum != 0)) {
- write32(cfiobase + (0x1700 / sizeof(u32)), (u32)0x01001002);
- for(cfio_cnt = 0; cfio_cnt < gpio->sus.cfio_entrynum; cfio_cnt++) {
- if (!((u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0))
- continue;
- write32(cfiobase + ((CFIO_PAD_CONF0 + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0);
- write32(cfiobase + ((CFIO_PAD_CONF1 + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_1);
- write32(cfiobase + ((CFIO_PAD_VAL + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_val);
- write32(cfiobase + ((CFIO_PAD_DFT + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_dft);
- }
- write32(cfiobase + (0x1700 / sizeof(u32)), (u32)0x01041002);
- }
-}
-
-int get_gpio(int gpio_num)
-{
- u16 gpio_base = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf;
- int bit;
-
- if (gpio_num > MAX_GPIO_NUMBER)
- return 0; /* Ignore wrong GPIO numbers. */
-
- bit = gpio_num % 32;
-
- return (inl(gpio_base + GPIO_SC_USE_SEL) >> bit) & 1;
-}
diff --git a/src/southbridge/intel/fsp_rangeley/gpio.h b/src/southbridge/intel/fsp_rangeley/gpio.h
deleted file mode 100644
index 0ead65cb40..0000000000
--- a/src/southbridge/intel/fsp_rangeley/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef INTEL_RANGELEY_GPIO_H
-#define INTEL_RANGELEY_GPIO_H
-
-#define GPIO_MODE_NATIVE 0
-#define GPIO_MODE_GPIO 1
-#define GPIO_MODE_NONE 1
-
-#define GPIO_DIR_OUTPUT 0
-#define GPIO_DIR_INPUT 1
-
-#define GPIO_LEVEL_LOW 0
-#define GPIO_LEVEL_HIGH 1
-
-#define GPIO_TPE_DISABLE 0
-#define GPIO_TPE_ENABLE 1
-
-#define GPIO_TNE_DISABLE 0
-#define GPIO_TNE_ENABLE 1
-
-#define GPIO_TS_DISABLE 0
-#define GPIO_TS_ENABLE 1
-
-#define GPIO_WE_DISABLE 0
-#define GPIO_WE_ENABLE 1
-
-struct soc_gpio {
- u32 gpio0 : 1;
- u32 gpio1 : 1;
- u32 gpio2 : 1;
- u32 gpio3 : 1;
- u32 gpio4 : 1;
- u32 gpio5 : 1;
- u32 gpio6 : 1;
- u32 gpio7 : 1;
- u32 gpio8 : 1;
- u32 gpio9 : 1;
- u32 gpio10 : 1;
- u32 gpio11 : 1;
- u32 gpio12 : 1;
- u32 gpio13 : 1;
- u32 gpio14 : 1;
- u32 gpio15 : 1;
- u32 gpio16 : 1;
- u32 gpio17 : 1;
- u32 gpio18 : 1;
- u32 gpio19 : 1;
- u32 gpio20 : 1;
- u32 gpio21 : 1;
- u32 gpio22 : 1;
- u32 gpio23 : 1;
- u32 gpio24 : 1;
- u32 gpio25 : 1;
- u32 gpio26 : 1;
- u32 gpio27 : 1;
- u32 gpio28 : 1;
- u32 gpio29 : 1;
- u32 gpio30 : 1;
- u32 gpio31 : 1;
-} __attribute__ ((packed));
-
-struct soc_cfio {
- u32 pad_conf_0;
- u32 pad_conf_1;
- u32 pad_val;
- u32 pad_dft;
-} __attribute__ ((packed));
-
-struct soc_gpio_map {
- /* GPIO core */
- struct {
- const struct soc_gpio *mode;
- const struct soc_gpio *direction;
- const struct soc_gpio *level;
- const struct soc_gpio *tpe;
- const struct soc_gpio *tne;
- const struct soc_gpio *ts;
- const struct soc_cfio *cfio_init;
- const u32 cfio_entrynum;
- }core;
-
- /* GPIO SUS */
- struct {
- const struct soc_gpio *mode;
- const struct soc_gpio *direction;
- const struct soc_gpio *level;
- const struct soc_gpio *tpe;
- const struct soc_gpio *tne;
- const struct soc_gpio *ts;
- const struct soc_gpio *we;
- const struct soc_cfio *cfio_init;
- const u32 cfio_entrynum;
- }sus;
-
-
-};
-
-/* Configure GPIOs with mainboard provided settings */
-void setup_soc_gpios(const struct soc_gpio_map *gpio);
-
-/* Get GPIO pin value */
-int get_gpio(int gpio_num);
-/*
- * Get a number comprised of multiple GPIO values. gpio_num_array points to
- * the array of GPIO pin numbers to scan, terminated by -1.
- */
-unsigned get_gpios(const int *gpio_num_array);
-
-#endif
diff --git a/src/southbridge/intel/fsp_rangeley/irq.h b/src/southbridge/intel/fsp_rangeley/irq.h
deleted file mode 100644
index 2028aaa3a9..0000000000
--- a/src/southbridge/intel/fsp_rangeley/irq.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef _RANGELEY_IRQ_H_
-#define _RANGELEY_IRQ_H_
-
-#define PIRQA_APIC_IRQ 16
-#define PIRQB_APIC_IRQ 17
-#define PIRQC_APIC_IRQ 18
-#define PIRQD_APIC_IRQ 19
-#define PIRQE_APIC_IRQ 20
-#define PIRQF_APIC_IRQ 21
-#define PIRQG_APIC_IRQ 22
-#define PIRQH_APIC_IRQ 23
-/* The below IRQs are for when devices are in ACPI mode. Active low. */
-#define LPE_DMA0_IRQ 24
-#define LPE_DMA1_IRQ 25
-#define LPE_SSP0_IRQ 26
-#define LPE_SSP1_IRQ 27
-#define LPE_SSP2_IRQ 28
-#define LPE_IPC2HOST_IRQ 29
-#define LPSS_I2C1_IRQ 32
-#define LPSS_I2C2_IRQ 33
-#define LPSS_I2C3_IRQ 34
-#define LPSS_I2C4_IRQ 35
-#define LPSS_I2C5_IRQ 36
-#define LPSS_I2C6_IRQ 37
-#define LPSS_I2C7_IRQ 38
-#define LPSS_HSUART1_IRQ 39
-#define LPSS_HSUART2_IRQ 40
-#define LPSS_SPI_IRQ 41
-#define LPSS_DMA1_IRQ 42
-#define LPSS_DMA2_IRQ 43
-#define SCC_EMMC_IRQ 44
-#define SCC_SDIO_IRQ 46
-#define SCC_SD_IRQ 47
-#define GPIO_NC_IRQ 48
-#define GPIO_SC_IRQ 49
-#define GPIO_SUS_IRQ 50
-/* GPIO direct / dedicated IRQs. */
-#define GPIO_S0_DED_IRQ_0 51
-#define GPIO_S0_DED_IRQ_1 52
-#define GPIO_S0_DED_IRQ_2 53
-#define GPIO_S0_DED_IRQ_3 54
-#define GPIO_S0_DED_IRQ_4 55
-#define GPIO_S0_DED_IRQ_5 56
-#define GPIO_S0_DED_IRQ_6 57
-#define GPIO_S0_DED_IRQ_7 58
-#define GPIO_S0_DED_IRQ_8 59
-#define GPIO_S0_DED_IRQ_9 60
-#define GPIO_S0_DED_IRQ_10 61
-#define GPIO_S0_DED_IRQ_11 62
-#define GPIO_S0_DED_IRQ_12 63
-#define GPIO_S0_DED_IRQ_13 64
-#define GPIO_S0_DED_IRQ_14 65
-#define GPIO_S0_DED_IRQ_15 66
-#define GPIO_S5_DED_IRQ_0 67
-#define GPIO_S5_DED_IRQ_1 68
-#define GPIO_S5_DED_IRQ_2 69
-#define GPIO_S5_DED_IRQ_3 70
-#define GPIO_S5_DED_IRQ_4 71
-#define GPIO_S5_DED_IRQ_5 72
-#define GPIO_S5_DED_IRQ_6 73
-#define GPIO_S5_DED_IRQ_7 74
-#define GPIO_S5_DED_IRQ_8 75
-#define GPIO_S5_DED_IRQ_9 76
-#define GPIO_S5_DED_IRQ_10 77
-#define GPIO_S5_DED_IRQ_11 78
-#define GPIO_S5_DED_IRQ_12 79
-#define GPIO_S5_DED_IRQ_13 80
-#define GPIO_S5_DED_IRQ_14 81
-#define GPIO_S5_DED_IRQ_15 82
-/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */
-#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot
-#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot
-#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot)
-#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot)
-
-/* PIC IRQ settings. */
-#define PIRQ_PIC_IRQ3 0x3
-#define PIRQ_PIC_IRQ4 0x4
-#define PIRQ_PIC_IRQ5 0x5
-#define PIRQ_PIC_IRQ6 0x6
-#define PIRQ_PIC_IRQ7 0x7
-#define PIRQ_PIC_IRQ9 0x9
-#define PIRQ_PIC_IRQ10 0xa
-#define PIRQ_PIC_IRQ11 0xb
-#define PIRQ_PIC_IRQ12 0xc
-#define PIRQ_PIC_IRQ14 0xe
-#define PIRQ_PIC_IRQ15 0xf
-#define PIRQ_PIC_IRQDISABLE 0x80
-#define PIRQ_PIC_UNKNOWN_UNUSED 0xff
-
-
-/* Overloaded term, but these values determine the per device route. */
-#define PIRQA 0
-#define PIRQB 1
-#define PIRQC 2
-#define PIRQD 3
-#define PIRQE 4
-#define PIRQF 5
-#define PIRQG 6
-#define PIRQH 7
-
-/* These registers live behind the ILB_BASE_ADDRESS */
-#define ACTL 0x00
-# define SCIS_MASK 0x07
-# define SCIS_IRQ9 0x00
-# define SCIS_IRQ10 0x01
-# define SCIS_IRQ11 0x02
-# define SCIS_IRQ20 0x04
-# define SCIS_IRQ21 0x05
-# define SCIS_IRQ22 0x06
-# define SCIS_IRQ23 0x07
-
-/* In each mainboard directory there should exist a header file irqroute.h that
- * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which
- * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */
-
-#if !defined(__ASSEMBLER__) && !defined(__ACPI__)
-#include <stdint.h>
-
-#define NUM_OF_PCI_DEVS 32
-#define NUM_PIRQS 8
-
-struct rangeley_irq_route {
- /* Per device configuration. */
- uint16_t pcidev[NUM_OF_PCI_DEVS];
- /* Route path for each internal PIRQx in PIC mode. */
- uint8_t pic[NUM_PIRQS];
-};
-
-extern const struct rangeley_irq_route global_rangeley_irq_route;
-
-#define DEFINE_IRQ_ROUTES \
- const struct rangeley_irq_route global_rangeley_irq_route = { \
- .pcidev = { PCI_DEV_PIRQ_ROUTES, }, \
- .pic = { PIRQ_PIC_ROUTES, }, \
- }
-
-#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
- [dev_] = ((PIRQ ## d_) << 12) | ((PIRQ ## c_) << 8) | \
- ((PIRQ ## b_) << 4) | ((PIRQ ## a_) << 0)
-
-#define PIRQ_PIC(pirq_, pic_irq_) \
- [PIRQ ## pirq_] = PIRQ_PIC_IRQ ## pic_irq_
-
-#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */
-
-#endif /* _RANGELEY_IRQ_H_ */
diff --git a/src/southbridge/intel/fsp_rangeley/lpc.c b/src/southbridge/intel/fsp_rangeley/lpc.c
deleted file mode 100644
index c04708194c..0000000000
--- a/src/southbridge/intel/fsp_rangeley/lpc.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <pc80/mc146818rtc.h>
-#include <pc80/isa-dma.h>
-#include <pc80/i8259.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <arch/acpi.h>
-#include <cpu/cpu.h>
-#include <elog.h>
-#include <string.h>
-#include <cbmem.h>
-#include <arch/acpi.h>
-#include <arch/acpigen.h>
-#include "soc.h"
-#include "irq.h"
-#include "nvs.h"
-
-#define NMI_OFF 0
-
-#define ENABLE_ACPI_MODE_IN_COREBOOT 0
-#define TEST_SMM_FLASH_LOCKDOWN 0
-
-typedef struct southbridge_intel_fsp_rangeley_config config_t;
-
-static void soc_enable_apic(struct device *dev)
-{
- int i;
- u32 reg32;
- volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
- volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
- u8 *ilb_base = (u8 *)(pci_read_config32(dev, IBASE) & ~0x0f);
-
- /*
- * Enable ACPI I/O and power management.
- * Set SCI IRQ to IRQ9
- */
- write32(ilb_base + ILB_OIC, 0x100); /* AEN */
- reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */
- write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */
-
- *ioapic_index = 0;
- *ioapic_data = (1 << 25);
-
- /* Affirm full set of redirection table entries ("write once") */
- *ioapic_index = 1;
- reg32 = *ioapic_data;
- *ioapic_index = 1;
- *ioapic_data = reg32;
-
- *ioapic_index = 0;
- reg32 = *ioapic_data;
- printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
- if (reg32 != (1 << 25))
- die("APIC Error\n");
-
- printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
- for (i=0; i<3; i++) {
- *ioapic_index = i;
- printk(BIOS_SPEW, " reg 0x%04x:", i);
- reg32 = *ioapic_data;
- printk(BIOS_SPEW, " 0x%08x\n", reg32);
- }
-
- *ioapic_index = 3; /* Select Boot Configuration register. */
- *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
-}
-
-static void soc_enable_serial_irqs(struct device *dev)
-{
- u8 *ibase;
-
- ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);
-
- /* Set packet length and toggle silent mode bit for one frame. */
- write8(ibase + ILB_SERIRQ_CNTL, (1 << 7));
-
-#if !CONFIG_SERIRQ_CONTINUOUS_MODE
- write8(ibase + ILB_SERIRQ_CNTL, 0);
-#endif
-}
-
-/*
- * Write PCI config space IRQ assignments. PCI devices have the INT_LINE
- * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing
- * information to operating systems and drivers. The INT_PIN register is
- * generally read only and reports which interrupt pin A - D it uses. The
- * INT_LINE register is configurable and reports which IRQ (generally the
- * PIC IRQs 1 - 15) it will use. This needs to take interrupt pin swizzling
- * on devices that are downstream on a PCI bridge into account.
- *
- * This function will loop through all enabled PCI devices and program the
- * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it
- * uses. It then configures each interrupt in the pic to be level triggered.
- */
-static void write_pci_config_irqs(void)
-{
- device_t irq_dev;
- device_t targ_dev;
- uint8_t int_line = 0;
- uint8_t original_int_pin = 0;
- uint8_t new_int_pin = 0;
- uint16_t current_bdf = 0;
- uint16_t parent_bdf = 0;
- uint8_t pirq = 0;
- uint8_t device_num = 0;
- const struct rangeley_irq_route *ir = &global_rangeley_irq_route;
-
- if (ir == NULL) {
- printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because"
- " 'global_rangeley_irq_route' structure does not exist\n");
- return;
- }
-
- /*
- * Loop through all enabled devices and program their
- * INT_LINE, INT_PIN registers from values taken from
- * the Interrupt Route registers in the ILB
- */
- printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n");
- for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
-
- if ((irq_dev->path.type != DEVICE_PATH_PCI) ||
- (!irq_dev->enabled))
- continue;
-
- current_bdf = irq_dev->path.pci.devfn |
- irq_dev->bus->secondary << 8;
-
- /*
- * Step 1: Get the INT_PIN and device structure to look for
- * in the pirq_data table defined in the mainboard directory.
- */
- targ_dev = NULL;
- new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev);
- if (targ_dev == NULL || new_int_pin < 1)
- continue;
-
- /* Get the original INT_PIN for record keeping */
- original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
-
- parent_bdf = targ_dev->path.pci.devfn
- | targ_dev->bus->secondary << 8;
- device_num = PCI_SLOT(parent_bdf);
-
- if (ir->pcidev[device_num] == 0) {
- printk(BIOS_WARNING,
- "Warning: PCI Device %d does not have an IRQ entry, skipping it\n",
- device_num);
- continue;
- }
-
- /* Find the PIRQ that is attached to the INT_PIN this device uses */
- pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF;
-
- /* Get the INT_LINE this device/function will use */
- int_line = ir->pic[pirq];
-
- if (int_line != PIRQ_PIC_IRQDISABLE) {
- /* Set this IRQ to level triggered since it is used by a PCI device */
- i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED);
- /* Set the Interrupt Line register in PCI config space */
- pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
- } else {
- /* Set the Interrupt line register as "unknown or unused" */
- pci_write_config8(irq_dev, PCI_INTERRUPT_LINE,
- PIRQ_PIC_UNKNOWN_UNUSED);
- }
-
- printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n",
- original_int_pin, pin_to_str(original_int_pin));
- if (parent_bdf != current_bdf)
- printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n",
- new_int_pin, pin_to_str(new_int_pin));
- printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n"
- "\tINT_LINE\t: 0x%X (IRQ %d)\n",
- 'A' + pirq, int_line, int_line);
- }
- printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
-}
-
-static void soc_pirq_init(device_t dev)
-{
- int i, j;
- int pirq;
- u8 *ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);
- u8 *pr_base = ibase + 0x08;
- u16 *ir_base = (u16 *)(ibase + 0x20);
- u32 *actl = (u32 *)ibase;
- const struct rangeley_irq_route *ir = &global_rangeley_irq_route;
-
- /* Set up the PIRQ PIC routing based on static config. */
- printk(BIOS_SPEW, "Start writing IRQ assignments\n"
- "PIRQ\tA \tB \tC \tD \tE \tF \tG \tH\n"
- "IRQ ");
- for (i = 0; i < NUM_PIRQS; i++) {
- write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]);
- printk(BIOS_SPEW, "\t%d", ir->pic[i]);
- }
- printk(BIOS_SPEW, "\n\n");
-
- /* Set up the per device PIRQ routing based on static config. */
- printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n"
- "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n");
- for (i = 0; i < NUM_OF_PCI_DEVS; i++) {
- write16(ir_base + i, ir->pcidev[i]);
-
- /* If the entry is more than just 0, print it out */
- if(ir->pcidev[i]) {
- printk(BIOS_SPEW, " %d: ", i);
- for (j = 0; j < 4; j++) {
- pirq = (ir->pcidev[i] >> (j * 4)) & 0xF;
- printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]);
- }
- printk(BIOS_SPEW, "\n");
- }
- }
-
- /* Route SCI to IRQ9 */
- write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9);
- printk(BIOS_SPEW, "Finished writing IRQ assignments\n");
-
- /* Write IRQ assignments to PCI config space */
- write_pci_config_irqs();
-}
-
-static void soc_power_options(device_t dev)
-{
- u8 reg8;
- u16 pmbase;
- u32 reg32;
-
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
-
- int nmi_option;
-
- /* Set up NMI on errors. */
- reg8 = inb(0x61);
- reg8 &= 0x0f; /* Higher Nibble must be 0 */
- reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
- // reg8 &= ~(1 << 2); /* PCI SERR# Enable */
- reg8 |= (1 << 2); /* PCI SERR# Disable for now */
- outb(reg8, 0x61);
-
- reg8 = inb(0x70);
- nmi_option = NMI_OFF;
- get_option(&nmi_option, "nmi");
- if (nmi_option) {
- printk(BIOS_INFO, "NMI sources enabled.\n");
- reg8 &= ~(1 << 7); /* Set NMI. */
- } else {
- printk(BIOS_INFO, "NMI sources disabled.\n");
- reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
- }
- outb(reg8, 0x70);
-
- pmbase = pci_read_config16(dev, ABASE) & ~0xf;
-
- outl(config->gpe0_en, pmbase + GPE0_EN);
- outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);
-
- /* Set up power management block and determine sleep mode */
- reg32 = inl(pmbase + PM1_CNT); // PM1_CNT
- reg32 &= ~(7 << 10); // SLP_TYP
- reg32 |= (1 << 0); // SCI_EN
- outl(reg32, pmbase + PM1_CNT);
-}
-
-/* Disable the HPET, Clear the counter, and re-enable it. */
-static void enable_hpet(void)
-{
- write8((u8 *)HPET_GCFG, 0x00);
- write32((u32 *)HPET_MCV, 0x00000000);
- write32((u32 *)(HPET_MCV + 0x04), 0x00000000);
- write8((u8 *)HPET_GCFG, 0x01);
-}
-
-static void soc_disable_smm_only_flashing(struct device *dev)
-{
- u8 reg8;
-
- printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... ");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
- reg8 &= ~(1 << 5);
- pci_write_config8(dev, 0xdc, reg8);
-}
-
-static void lpc_init(struct device *dev)
-{
- printk(BIOS_DEBUG, "soc: lpc_init\n");
-
- /* Set the value for PCI command register. */
- pci_write_config16(dev, PCI_COMMAND, 0x000f);
-
- /* IO APIC initialization. */
- soc_enable_apic(dev);
-
- soc_enable_serial_irqs(dev);
-
- /* Setup the PIRQ. */
- soc_pirq_init(dev);
-
- /* Setup power options. */
- soc_power_options(dev);
-
- /* Initialize power management */
- switch (soc_silicon_type()) {
- case SOC_TYPE_RANGELEY:
- break;
- default:
- printk(BIOS_DEBUG, "Unknown Chipset: 0x%04x\n", dev->device);
- }
-
- /* Initialize ISA DMA. */
- isa_dma_init();
-
- /* Initialize the High Precision Event Timers, if present. */
- enable_hpet();
-
- setup_i8259();
-
- /* Interrupt 9 should be level triggered (SCI) */
- i8259_configure_irq_trigger(9, 1);
-
- soc_disable_smm_only_flashing(dev);
-}
-
-static void soc_lpc_read_resources(device_t dev)
-{
- struct resource *res;
- config_t *config = dev->chip_info;
- u8 io_index = 0;
-
- /* Get the normal PCI resources of this device. */
- pci_dev_read_resources(dev);
-
- /* Add an extra subtractive resource for both memory and I/O. */
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = 0;
- res->size = 0x1000;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = 0xff800000;
- res->size = 0x00800000; /* 8 MB for flash */
- res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- res = new_resource(dev, 3); /* IOAPIC */
- res->base = IO_APIC_ADDR;
- res->size = 0x00001000;
- res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- /* Set SOC IO decode ranges if required.*/
- if ((config->gen1_dec & 0xFFFC) > 0x1000) {
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = config->gen1_dec & 0xFFFC;
- res->size = (config->gen1_dec >> 16) & 0xFC;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
- }
-
- if ((config->gen2_dec & 0xFFFC) > 0x1000) {
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = config->gen2_dec & 0xFFFC;
- res->size = (config->gen2_dec >> 16) & 0xFC;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
- }
-
- if ((config->gen3_dec & 0xFFFC) > 0x1000) {
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = config->gen3_dec & 0xFFFC;
- res->size = (config->gen3_dec >> 16) & 0xFC;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
- }
-
- if ((config->gen4_dec & 0xFFFC) > 0x1000) {
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = config->gen4_dec & 0xFFFC;
- res->size = (config->gen4_dec >> 16) & 0xFC;
- res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
- }
-}
-
-static void soc_lpc_enable_resources(device_t dev)
-{
- return pci_dev_enable_resources(dev);
-}
-
-static void soc_lpc_enable(device_t dev)
-{
- soc_enable(dev);
-}
-
-static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static void southbridge_inject_dsdt(device_t dev)
-{
- global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof (*gnvs));
-
- if (gnvs) {
- memset(gnvs, 0, sizeof(*gnvs));
- acpi_create_gnvs(gnvs);
- acpi_save_gnvs((unsigned long)gnvs);
-#if CONFIG_HAVE_SMI_HANDLER
- /* And tell SMI about it */
- smm_setup_structures(gnvs, NULL, NULL);
-#endif
-
- /* Add it to DSDT. */
- acpigen_write_scope("\\");
- acpigen_write_name_dword("NVSA", (u32) gnvs);
- acpigen_pop_len();
- }
-}
-
-static struct pci_operations pci_ops = {
- .set_subsystem = set_subsystem,
-};
-
-static struct device_operations device_ops = {
- .read_resources = soc_lpc_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = soc_lpc_enable_resources,
- .init = lpc_init,
- .write_acpi_tables = acpi_write_hpet,
- .acpi_inject_dsdt_generator = southbridge_inject_dsdt,
- .enable = soc_lpc_enable,
- .scan_bus = scan_lpc_bus,
- .ops_pci = &pci_ops,
-};
-
-/* IDs for LPC device of Intel 89xx Series Chipset */
-static const unsigned short pci_device_ids[] = { 0x1F38, 0x1F39, 0x1F3A, 0x1F3B,
- 0 };
-
-static const struct pci_driver soc_lpc __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/southbridge/intel/fsp_rangeley/nvs.h b/src/southbridge/intel/fsp_rangeley/nvs.h
deleted file mode 100644
index cabbdea941..0000000000
--- a/src/southbridge/intel/fsp_rangeley/nvs.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2011 Google Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-typedef struct {
- /* Miscellaneous */
- u16 osys; /* 0x00 - Operating System */
- u8 smif; /* 0x02 - SMI function call ("TRAP") */
- u8 prm0; /* 0x03 - SMI function call parameter */
- u8 prm1; /* 0x04 - SMI function call parameter */
- u8 scif; /* 0x05 - SCI function call (via _L00) */
- u8 prm2; /* 0x06 - SCI function call parameter */
- u8 prm3; /* 0x07 - SCI function call parameter */
- u8 lckf; /* 0x08 - Global Lock function for EC */
- u8 prm4; /* 0x09 - Lock function parameter */
- u8 prm5; /* 0x0a - Lock function parameter */
- u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
- u8 lids; /* 0x0f - LID state (open = 1) */
- u8 pwrs; /* 0x10 - Power state (AC = 1) */
- /* Thermal policy */
- u8 tlvl; /* 0x11 - Throttle Level Limit */
- u8 flvl; /* 0x12 - Current FAN Level */
- u8 tcrt; /* 0x13 - Critical Threshold */
- u8 tpsv; /* 0x14 - Passive Threshold */
- u8 tmax; /* 0x15 - CPU Tj_max */
- u8 f0of; /* 0x16 - FAN 0 OFF Threshold */
- u8 f0on; /* 0x17 - FAN 0 ON Threshold */
- u8 f0pw; /* 0x18 - FAN 0 PWM value */
- u8 f1of; /* 0x19 - FAN 1 OFF Threshold */
- u8 f1on; /* 0x1a - FAN 1 ON Threshold */
- u8 f1pw; /* 0x1b - FAN 1 PWM value */
- u8 f2of; /* 0x1c - FAN 2 OFF Threshold */
- u8 f2on; /* 0x1d - FAN 2 ON Threshold */
- u8 f2pw; /* 0x1e - FAN 2 PWM value */
- u8 f3of; /* 0x1f - FAN 3 OFF Threshold */
- u8 f3on; /* 0x20 - FAN 3 ON Threshold */
- u8 f3pw; /* 0x21 - FAN 3 PWM value */
- u8 f4of; /* 0x22 - FAN 4 OFF Threshold */
- u8 f4on; /* 0x23 - FAN 4 ON Threshold */
- u8 f4pw; /* 0x24 - FAN 4 PWM value */
- u8 tmps; /* 0x25 - Temperature Sensor ID */
- u8 rsvd3[2];
- /* Processor Identification */
- u8 apic; /* 0x28 - APIC enabled */
- u8 mpen; /* 0x29 - MP capable/enabled */
- u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */
- u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */
- u8 ppcm; /* 0x2c - Max. PPC state */
- u8 pcnt; /* 0x2d - Processor Count */
- u8 rsvd4[4];
- /* Super I/O & CMOS config */
- u8 natp; /* 0x32 - SIO type */
- u8 s5u0; /* 0x33 - Enable USB0 in S5 */
- u8 s5u1; /* 0x34 - Enable USB1 in S5 */
- u8 s3u0; /* 0x35 - Enable USB0 in S3 */
- u8 s3u1; /* 0x36 - Enable USB1 in S3 */
- u8 s33g; /* 0x37 - Enable S3 in 3G */
- u32 obsolete_cmem; /* 0x38 - CBMEM TOC */
- /* Integrated Graphics Device */
- u8 igds; /* 0x3c - IGD state */
- u8 tlst; /* 0x3d - Display Toggle List Pointer */
- u8 cadl; /* 0x3e - currently attached devices */
- u8 padl; /* 0x3f - previously attached devices */
- u16 cste; /* 0x40 - current display state */
- u16 nste; /* 0x42 - next display state */
- u16 sste; /* 0x44 - set display state */
- u8 ndid; /* 0x46 - number of device ids */
- u32 did[5]; /* 0x47 - 5b device id 1..5 */
- u8 rsvd5[0x9];
- /* Backlight Control */
- u8 blcs; /* 0x64 - Backlight Control possible */
- u8 brtl;
- u8 odds;
- u8 rsvd6[0x7];
- /* Ambient Light Sensors*/
- u8 alse; /* 0x6e - ALS enable */
- u8 alaf;
- u8 llow;
- u8 lhih;
- u8 rsvd7[0x6];
- /* Extended Mobile Access */
- u8 emae; /* 0x78 - EMA enable */
- u16 emap; /* 0x79 - EMA pointer */
- u16 emal; /* 0x7a - EMA Length */
- u8 rsvd8[0x5];
- /* MEF */
- u8 mefe; /* 0x82 - MEF enable */
- u8 rsvd9[0x9];
- /* TPM support */
- u8 tpmp; /* 0x8c - TPM */
- u8 tpme;
- u8 rsvd10[8];
- /* SATA */
- u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */
- u8 gtf1[7];
- u8 gtf2[7];
- u8 idem;
- u8 idet;
- u8 rsvd11[7];
- /* IGD OpRegion (not implemented yet) */
- u32 aslb; /* 0xb4 - IGD OpRegion Base Address */
- u8 ibtt; /* 0xb8 - IGD boot type */
- u8 ipat; /* 0xb9 - IGD panel type */
- u8 itvf; /* 0xba - IGD TV format */
- u8 itvm; /* 0xbb - IGD TV minor format */
- u8 ipsc; /* 0xbc - IGD Panel Scaling */
- u8 iblc; /* 0xbd - IGD BLC configuration */
- u8 ibia; /* 0xbe - IGD BIA configuration */
- u8 issc; /* 0xbf - IGD SSC configuration */
- u8 i409; /* 0xc0 - IGD 0409 modified settings */
- u8 i509; /* 0xc1 - IGD 0509 modified settings */
- u8 i609; /* 0xc2 - IGD 0609 modified settings */
- u8 i709; /* 0xc3 - IGD 0709 modified settings */
- u8 idmm; /* 0xc4 - IGD Power Conservation */
- u8 idms; /* 0xc5 - IGD DVMT memory size */
- u8 if1e; /* 0xc6 - IGD Function 1 Enable */
- u8 hvco; /* 0xc7 - IGD HPLL VCO */
- u32 nxd[8]; /* 0xc8 - IGD next state DIDx for _DGS */
- u8 isci; /* 0xe8 - IGD SMI/SCI mode (0: SCI) */
- u8 pavp; /* 0xe9 - IGD PAVP data */
- u8 rsvd12; /* 0xea - rsvd */
- u8 oscc; /* 0xeb - PCIe OSC control */
- u8 npce; /* 0xec - native pcie support */
- u8 plfl; /* 0xed - platform flavor */
- u8 brev; /* 0xee - board revision */
- u8 dpbm; /* 0xef - digital port b mode */
- u8 dpcm; /* 0xf0 - digital port c mode */
- u8 dpdm; /* 0xf1 - digital port c mode */
- u8 alfp; /* 0xf2 - active lfp */
- u8 imon; /* 0xf3 - current graphics turbo imon value */
- u8 mmio; /* 0xf4 - 64bit mmio support */
- u8 rsvd13[11]; /* 0xf5 - rsvd */
-
-} __attribute__((packed)) global_nvs_t;
-
-void acpi_create_gnvs(global_nvs_t *gnvs);
-#ifdef __SMM__
-/* Used in SMM to find the ACPI GNVS address */
-global_nvs_t *smm_get_gnvs(void);
-#endif
diff --git a/src/southbridge/intel/fsp_rangeley/pci_devs.h b/src/southbridge/intel/fsp_rangeley/pci_devs.h
deleted file mode 100644
index 03b0193f5f..0000000000
--- a/src/southbridge/intel/fsp_rangeley/pci_devs.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef _RANGELEY_PCI_DEVS_H_
-#define _RANGELEY_PCI_DEVS_H_
-
-#define BUS0 0
-
-/* All these devices live on bus 0 with the associated device and function */
-#define DEV_FUNC(x,y) ((x<<3) | y)
-
-/* Host Bridge */
-#define SOC_DEV 0x0
-#define SOC_FUNC 0
-# define SOC_DEVID 0x1f08
-# define SOC_DEV_FUNC DEV_FUNC(SOC_DEV,SOC_FUNC)
-
-/* PCIE Port 1 */
-#define PCIE_PORT1_DEV 0x1
-#define PCIE_PORT1_FUNC 0
-# define PCIE_PORT1_DEVID 0x1f10
-# define PCIE_PORT1_DEV_FUNC DEV_FUNC(PCIE_PORT1_DEV,PCIE_PORT1_FUNC)
-
-/* PCIE Port 2 */
-#define PCIE_PORT2_DEV 0x2
-#define PCIE_PORT2_FUNC 0
-# define PCIE_PORT2_DEVID 0x1f11
-# define PCIE_PORT2_DEV_FUNC DEV_FUNC(PCIE_PORT2_DEV,PCIE_PORT2_FUNC)
-
-/* PCIE Port 3 */
-#define PCIE_PORT3_DEV 0x3
-#define PCIE_PORT3_FUNC 0
-# define PCIE_PORT3_DEVID 0x1f12
-# define PCIE_PORT3_DEV_FUNC DEV_FUNC(PCIE_PORT3_DEV,PCIE_PORT3_FUNC)
-
-/* PCIE Port 4 */
-#define PCIE_PORT4_DEV 0x4
-#define PCIE_PORT4_FUNC 0
-# define PCIE_PORT4_DEVID 0x1f13
-# define PCIE_PORT4_DEV_FUNC DEV_FUNC(PCIE_PORT4_DEV,PCIE_PORT4_FUNC)
-
-/* Host Bridge, Fabric, and RAS Registers */
-#define HOST_BRIDGE_DEV 0xe
-#define HOST_BRIDGE_FUNC 0
-# define HOST_BRIDGE_DEVID 0x1f14
-# define HOST_BRIDGE_DEV_FUNC DEV_FUNC(HOST_BRIDGE_DEV,HOST_BRIDGE_FUNC)
-
-/* Root Complex Event Collector (RCEC) */
-#define RCEC_DEV 0xf
-#define RCEC_FUNC 0
-# define RCEC_DEVID 0x1f16
-# define RCEC_DEV_FUNC DEV_FUNC(RCEC_DEV,RCEC_FUNC)
-
-/* SMBus 2.0 1 */
-#define SMBUS1_DEV 0x13
-#define SMBUS1_FUNC 0
-# define SMBUS1_DEVID 0x1f15
-# define SMBUS1_DEV_FUNC DEV_FUNC(SMBUS1_DEV,SMBUS1_FUNC)
-
-/* Gigabit Ethernet (GbE) */
-#define GBE_DEV 0x14
-#define GBE_DEVID 0x1f41
-#define GBE1_DEV GBE_DEV
-#define GBE1_FUNC 0
-# define GBE1_DEVID GBE_DEVID
-# define GBE1_DEV_FUNC DEV_FUNC(GBE1_DEV,GBE1_FUNC)
-#define GBE2_DEV GBE_DEV
-#define GBE2_FUNC 1
-# define GBE2_DEVID GBE_DEVID
-# define GBE2_DEV_FUNC DEV_FUNC(GBE2_DEV,GBE2_FUNC)
-#define GBE3_DEV GBE_DEV
-#define GBE3_FUNC 2
-# define GBE3_DEVID GBE_DEVID
-# define GBE3_DEV_FUNC DEV_FUNC(GBE3_DEV,GBE3_FUNC)
-#define GBE4_DEV GBE_DEV
-#define GBE4_FUNC 3
-# define GBE4_DEVID GBE_DEVID
-# define GBE4_DEV_FUNC DEV_FUNC(GBE4_DEV,GBE4_FUNC)
-
-/* USB 2.0 */
-#define USB2_DEV 0x16
-#define USB2_FUNC 0
-# define USB2_DEVID 0x1f2c
-# define USB2_DEV_FUNC DEV_FUNC(USB2_DEV,USB2_FUNC)
-
-/* SATA Gen 2 */
-#define SATA2_DEV 0x17
-#define SATA2_FUNC 0
-# define SATA2_DEVID 0x1f22
-# define SATA2_DEV_FUNC DEV_FUNC(SATA2_DEV,SATA2_FUNC)
-
-/* SATA Gen 3 */
-#define SATA3_DEV 0x18
-#define SATA3_FUNC 0
-# define SATA3_DEVID 0x1f32
-# define SATA3_DEV_FUNC DEV_FUNC(SATA3_DEV,SATA3_FUNC)
-
-/* Platform Control Unit (PCU) */
-#define PCU_DEV 0x1f
-
-/* Low Pin Count (LPC/ISA) */
-#define LPC_DEV PCU_DEV
-#define LPC_FUNC 0
-# define LPC_DEVID 0x1f38
-# define LPC_DEV_FUNC DEV_FUNC(LPC_DEV,LPC_FUNC)
-# define LPC_BDF PCI_DEV(BUS0, LPC_DEV, LPC_FUNC)
-
-/* SMBus 2.0 0 */
-#define SMBUS0_DEV PCU_DEV
-#define SMBUS0_FUNC 3
-# define SMBUS0_DEVID 0x1f3c
-# define SMBUS0_DEV_FUNC DEV_FUNC(SMBUS0_DEV,SMBUS0_FUNC)
-
-/* Intel QuickAssist Integrated Accelerator (IQIA) */
-#define IQAT_DEV 0xb
-#define IQAT_FUNC 0
-# define IQAT_DEVID 0x1f18
-# define IQAT_DEV_FUNC DEV_FUNC(IQAT_DEV,IQAT_FUNC)
-
-#endif /* _RANGELEY_PCI_DEVS_H_ */
diff --git a/src/southbridge/intel/fsp_rangeley/reset.c b/src/southbridge/intel/fsp_rangeley/reset.c
deleted file mode 100644
index 8ef890ab56..0000000000
--- a/src/southbridge/intel/fsp_rangeley/reset.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <arch/io.h>
-#include <reset.h>
-
-void soft_reset(void)
-{
- hard_reset();
-}
-
-void hard_reset(void)
-{
- outb(0x02, 0xcf9);
- outb(0x06, 0xcf9);
-}
diff --git a/src/southbridge/intel/fsp_rangeley/romstage.c b/src/southbridge/intel/fsp_rangeley/romstage.c
deleted file mode 100644
index bc58b487c0..0000000000
--- a/src/southbridge/intel/fsp_rangeley/romstage.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <lib.h>
-#include <timestamp.h>
-#include <arch/io.h>
-#include <device/pci_def.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include "northbridge/intel/fsp_rangeley/northbridge.h"
-#include "southbridge/intel/fsp_rangeley/soc.h"
-#include "southbridge/intel/fsp_rangeley/gpio.h"
-#include "southbridge/intel/fsp_rangeley/romstage.h"
-#include <arch/cpu.h>
-#include <arch/stages.h>
-#include <cpu/x86/msr.h>
-#include "gpio.h"
-
-void main(FSP_INFO_HEADER *fsp_info_header)
-{
- uint32_t fd_mask = 0;
- uint32_t *func_dis = (uint32_t *)(DEFAULT_PBASE + PBASE_FUNC_DIS);
-
- /*
- * Do not use the Serial Console before it is setup.
- * This causes the I/O to clog and a side effect is
- * that the reset button stops functioning. So
- * instead just use outb so it doesn't output to the
- * console when CONFIG_CONSOLE_POST.
- */
- outb(0x40, 0x80);
-
- timestamp_init(get_initial_timestamp());
- timestamp_add_now(TS_START_ROMSTAGE);
-
- /* Rangeley UART POR state is enabled */
- console_init();
- post_code(0x41);
-
- /* Enable GPIOs BAR */
- pci_write_config32(SOC_LPC_DEV, GBASE, DEFAULT_GPIOBASE|0x02);
-
- early_mainboard_romstage_entry();
-
- post_code(0x42);
- rangeley_sb_early_initialization();
-
- post_code(0x46);
- /* Program any required function disables */
- get_func_disables(&fd_mask);
-
- if (fd_mask != 0) {
- write32(func_dis, read32(func_dis) | fd_mask);
- /* Ensure posted write hits. */
- read32(func_dis);
- }
-
- timestamp_add_now(TS_BEFORE_INITRAM);
-
- /*
- * Call early init to initialize memory and chipset. This function returns
- * to the romstage_main_continue function with a pointer to the HOB
- * structure.
- */
- post_code(0x47);
- printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n");
- fsp_early_init(fsp_info_header);
- die("Uh Oh! fsp_early_init should not return here.\n");
-}
-
-/*******************************************************************************
- * The FSP early_init function returns to this function.
- * Memory is setup and the stack is set by the FSP.
- */
-void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr) {
- int cbmem_was_initted;
- void *cbmem_hob_ptr;
-
- timestamp_add_now(TS_AFTER_INITRAM);
-
- post_code(0x48);
- printk(BIOS_DEBUG, "%s status: %x hob_list_ptr: %x\n",
- __func__, (u32) status, (u32) hob_list_ptr);
-
-#if IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE)
- /* FSP reconfigures USB, so reinit it to have debug */
- usbdebug_init();
-#endif /* IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) */
-
- printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status);
-
- post_code(0x4b);
- late_mainboard_romstage_entry();
-
- post_code(0x4c);
-
- /* Decode E0000 and F0000 segment to DRAM */
- sideband_write(B_UNIT, BMISC, sideband_read(B_UNIT, BMISC) | (1 << 1) | (1 << 0));
-
- quick_ram_check();
- post_code(0x4d);
-
- cbmem_was_initted = !cbmem_recovery(0);
-
- /* Save the HOB pointer in CBMEM to be used in ramstage*/
- cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*hob_list_ptr));
- *(u32*)cbmem_hob_ptr = (u32)hob_list_ptr;
- post_code(0x4e);
-
- post_code(0x4f);
-
- /* Load the ramstage. */
- copy_and_run();
- while (1);
-}
-
-uint64_t get_initial_timestamp(void)
-{
- return 0;
-}
diff --git a/src/southbridge/intel/fsp_rangeley/romstage.h b/src/southbridge/intel/fsp_rangeley/romstage.h
deleted file mode 100644
index f3b7242d06..0000000000
--- a/src/southbridge/intel/fsp_rangeley/romstage.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef _RANGELEY_ROMSTAGE_H_
-#define _RANGELEY_ROMSTAGE_H_
-
-#if !defined(__PRE_RAM__)
-#error "Don't include romstage.h from a ramstage compilation unit!"
-#endif
-
-#include <stdint.h>
-#include <arch/cpu.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-
-void main(FSP_INFO_HEADER *fsp_info_header);
-void early_mainboard_romstage_entry(void);
-void late_mainboard_romstage_entry(void);
-void get_func_disables(uint32_t *mask);
-
-void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr);
-
-#endif /* _RANGELEY_ROMSTAGE_H_ */
diff --git a/src/southbridge/intel/fsp_rangeley/sata.c b/src/southbridge/intel/fsp_rangeley/sata.c
deleted file mode 100644
index f1398c95c0..0000000000
--- a/src/southbridge/intel/fsp_rangeley/sata.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include "soc.h"
-
-typedef struct southbridge_intel_fsp_rangeley_config config_t;
-
-static void sata_init(struct device *dev)
-{
- u32 reg32;
- u16 reg16;
- u32 *abar;
-
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
-
- printk(BIOS_DEBUG, "SATA: Initializing...\n");
-
- if (config == NULL) {
- printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n");
- return;
- }
-
- /* SATA configuration is handled by the FSP */
-
- /* Enable BARs */
- pci_write_config16(dev, PCI_COMMAND, 0x0007);
-
- if (config->ide_legacy_combined) {
- printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n");
-
- /* Set the controller mode */
- reg16 = pci_read_config16(dev, SATA_MAP);
- reg16 &= ~(3 << 6);
- pci_write_config16(dev, SATA_MAP, reg16);
-
- /* No AHCI: clear AHCI base */
- pci_write_config32(dev, 0x24, 0x00000000);
-
- /* And without AHCI BAR no memory decoding */
- reg16 = pci_read_config16(dev, PCI_COMMAND);
- reg16 &= ~PCI_COMMAND_MEMORY;
- pci_write_config16(dev, PCI_COMMAND, reg16);
- } else if(config->sata_ahci) {
- printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n");
-
- /* Set the controller mode */
- reg16 = pci_read_config16(dev, SATA_MAP);
- reg16 &= ~(3 << 6);
- reg16 |= (1 << 6);
- pci_write_config16(dev, SATA_MAP, reg16);
-
- /* Initialize AHCI memory-mapped space */
- abar = (u32 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5);
- printk(BIOS_DEBUG, "ABAR: %p\n", abar);
-
- /* Enable AHCI Mode */
- reg32 = read32(abar + 0x01);
- reg32 |= (1 << 31);
- write32(abar + 0x01, reg32);
- } else {
- printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n");
- }
-
- /* Spin up the drives as early as possible via the Port Enable */
- reg16 = pci_read_config16(dev, SATA_PSC);
- reg16 &= ~0x3f;
- pci_write_config16(dev, SATA_PSC, reg16);
- reg16 = pci_read_config16(dev, SATA_PSC);
- reg16 |= 0x3f;
- pci_write_config16(dev, SATA_PSC, reg16);
-
-}
-
-static void sata_enable(device_t dev)
-{
-}
-
-static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations sata_pci_ops = {
- .set_subsystem = sata_set_subsystem,
-};
-
-static struct device_operations sata_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = sata_init,
- .enable = sata_enable,
- .scan_bus = 0,
- .ops_pci = &sata_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = { 0x1f20, 0x1f21, 0x1f22, 0x1f23,
- 0x1f30, 0x1f31, 0x1f32, 0x1f33,
- 0 };
-
-static const struct pci_driver soc_sata __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/southbridge/intel/fsp_rangeley/smbus.c b/src/southbridge/intel/fsp_rangeley/smbus.c
deleted file mode 100644
index 7864b1e157..0000000000
--- a/src/southbridge/intel/fsp_rangeley/smbus.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/path.h>
-#include <device/smbus.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include "soc.h"
-#include "smbus.h"
-
-static int lsmbus_read_byte(device_t dev, u8 address)
-{
- u16 device;
- struct resource *res;
- struct bus *pbus;
-
- device = dev->path.i2c.device;
- pbus = get_pbus_smbus(dev);
- res = find_resource(pbus->dev, 0x20);
-
- return do_smbus_read_byte(res->base, device, address);
-}
-
-static struct smbus_bus_operations lops_smbus_bus = {
- .read_byte = lsmbus_read_byte,
-};
-
-static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations smbus_pci_ops = {
- .set_subsystem = smbus_set_subsystem,
-};
-
-static void rangeley_smbus_read_resources(device_t dev)
-{
- struct resource *res;
-
- /*
- * The SMBus has two BARS.
- * BAR0 - MMIO, not used at boot time
- * BAR4 - IO, Used to talk to the SMBUS during boot, so we maintain
- * the default setting in the resource allocator.
- */
-
- res = pci_get_resource(dev, PCI_BASE_ADDRESS_0);
-
- res = new_resource(dev, PCI_BASE_ADDRESS_4);
- res->base = SMBUS_IO_BASE;
- res->size = 32;
- res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE |
- IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-
-}
-
-static struct device_operations smbus_ops = {
- .read_resources = rangeley_smbus_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = 0,
- .scan_bus = scan_smbus,
- .ops_smbus_bus = &lops_smbus_bus,
- .ops_pci = &smbus_pci_ops,
-};
-
-static const struct pci_driver rangeley_smbus __pci_driver = {
- .ops = &smbus_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x1F3C,
-};
diff --git a/src/southbridge/intel/fsp_rangeley/smbus.h b/src/southbridge/intel/fsp_rangeley/smbus.h
deleted file mode 100644
index 6789e051e1..0000000000
--- a/src/southbridge/intel/fsp_rangeley/smbus.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
- * Copyright (C) 2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <device/smbus_def.h>
-#include "soc.h"
-
-static void smbus_delay(void)
-{
- inb(0x80);
-}
-
-static int smbus_wait_until_ready(u16 smbus_base)
-{
- unsigned loops = SMBUS_TIMEOUT;
- unsigned char byte;
- do {
- smbus_delay();
- if (--loops == 0)
- break;
- byte = inb(smbus_base + SMBHSTSTAT);
- } while (byte & 1);
- return loops ? 0 : -1;
-}
-
-static int smbus_wait_until_done(u16 smbus_base)
-{
- unsigned loops = SMBUS_TIMEOUT;
- unsigned char byte;
- do {
- smbus_delay();
- if (--loops == 0)
- break;
- byte = inb(smbus_base + SMBHSTSTAT);
- } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
- return loops ? 0 : -1;
-}
-
-static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
-{
- unsigned char global_status_register;
- unsigned char byte;
-
- if (smbus_wait_until_ready(smbus_base) < 0) {
- return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
- }
- /* Setup transaction */
- /* Disable interrupts */
- outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
- /* Set the device I'm talking too */
- outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
- /* Set the command/address... */
- outb(address & 0xff, smbus_base + SMBHSTCMD);
- /* Set up for a byte data read */
- outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
- (smbus_base + SMBHSTCTL));
- /* Clear any lingering errors, so the transaction will run */
- outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
- /* Clear the data byte... */
- outb(0, smbus_base + SMBHSTDAT0);
-
- /* Start the command */
- outb((inb(smbus_base + SMBHSTCTL) | 0x40),
- smbus_base + SMBHSTCTL);
-
- /* Poll for transaction completion */
- if (smbus_wait_until_done(smbus_base) < 0) {
- return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
- }
-
- global_status_register = inb(smbus_base + SMBHSTSTAT);
-
- /* Ignore the "In Use" status... */
- global_status_register &= ~(3 << 5);
-
- /* Read results of transaction */
- byte = inb(smbus_base + SMBHSTDAT0);
- if (global_status_register != (1 << 1)) {
- return SMBUS_ERROR;
- }
- return byte;
-}
diff --git a/src/southbridge/intel/fsp_rangeley/soc.c b/src/southbridge/intel/fsp_rangeley/soc.c
deleted file mode 100644
index bc6a4525aa..0000000000
--- a/src/southbridge/intel/fsp_rangeley/soc.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <console/console.h>
-#include <delay.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include "soc.h"
-
-static int soc_revision_id = -1;
-static int soc_type = -1;
-
-int soc_silicon_revision(void)
-{
- if (soc_revision_id < 0)
- soc_revision_id = pci_read_config8(
- dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
- PCI_REVISION_ID);
- return soc_revision_id;
-}
-
-int soc_silicon_type(void)
-{
- if (soc_type < 0)
- soc_type = pci_read_config8(
- dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
- PCI_DEVICE_ID + 1);
- return soc_type;
-}
-
-int soc_silicon_supported(int type, int rev)
-{
- int cur_type = soc_silicon_type();
- int cur_rev = soc_silicon_revision();
-
- switch (type) {
- case SOC_TYPE_RANGELEY:
- if (cur_type == SOC_TYPE_RANGELEY && cur_rev >= rev)
- return 1;
- }
-
- return 0;
-}
-
-/* Set bit in Function Disable register to hide this device */
-static void soc_hide_devfn(unsigned devfn)
-{
-/* TODO Function Disable. */
-}
-
-
-
-
-void soc_enable(device_t dev)
-{
- u32 reg32;
-
- if (!dev->enabled) {
- printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev));
-
- /* Ensure memory, IO, and bus master are all disabled */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Hide this device if possible */
- soc_hide_devfn(dev->path.pci.devfn);
- } else {
- /* Enable SERR */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_SERR;
- pci_write_config32(dev, PCI_COMMAND, reg32);
- }
-}
-
-struct chip_operations southbridge_intel_fsp_rangeley_ops = {
- CHIP_NAME("Intel Rangeley Southbridge")
- .enable_dev = soc_enable,
-};
diff --git a/src/southbridge/intel/fsp_rangeley/soc.h b/src/southbridge/intel/fsp_rangeley/soc.h
deleted file mode 100644
index 61ec266c42..0000000000
--- a/src/southbridge/intel/fsp_rangeley/soc.h
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#ifndef SOUTHBRIDGE_INTEL_RANGELEY_SOC_H
-#define SOUTHBRIDGE_INTEL_RANGELEY_SOC_H
-
-/* SOC types */
-#define SOC_TYPE_RANGELEY 0x1F
-
-/*
- * It does not matter where we put the SMBus I/O base, as long as we
- * keep it consistent and don't interfere with other devices. Stage2
- * will relocate this anyways.
- * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE
- * again. But handling static BARs is a generic problem that should be
- * solved in the device allocator.
- */
-
-/* Southbridge internal device IO BARs (Set to match FSP settings) */
-#define SMBUS_IO_BASE 0xefa0
-#define SMBUS_SLAVE_ADDR 0x24
-#define DEFAULT_GPIOBASE 0x0500
-#define DEFAULT_ABASE 0x0400
-
-/* Southbridge internal device MEM BARs (Set to match FSP settings) */
-#define DEFAULT_IBASE 0xfed08000
-#define DEFAULT_PBASE 0xfed03000
-#ifndef __ACPI__
-#define DEFAULT_RCBA ((u8 *)0xfed1c000)
-#else
-#define DEFAULT_RCBA 0xfed1c000
-#endif
-
-#ifndef __ACPI__
-#define DEBUG_PERIODIC_SMIS 0
-
-#if defined (__SMM__) && !defined(__ASSEMBLER__)
-void intel_soc_finalize_smm(void);
-#endif
-
-#if !defined(__ASSEMBLER__) && !defined(__ROMCC__)
-#if !defined(__PRE_RAM__) && !defined(__SMM__)
-#include "chip.h"
-int soc_silicon_revision(void);
-int soc_silicon_type(void);
-int soc_silicon_supported(int type, int rev);
-void soc_enable(device_t dev);
-
-#include <arch/acpi.h>
-void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt);
-
-#if CONFIG_ELOG
-void soc_log_state(void);
-#endif
-#else
-void enable_smbus(void);
-void enable_usb_bar(void);
-int smbus_read_byte(unsigned device, unsigned address);
-int early_spi_read(u32 offset, u32 size, u8 *buffer);
-void rangeley_sb_early_initialization(void);
-#endif
-#endif
-
-#define MAINBOARD_POWER_OFF 0
-#define MAINBOARD_POWER_ON 1
-#define MAINBOARD_POWER_KEEP 2
-
-#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
-#endif
-
-#define SOC_EHCI1_DEV PCI_DEV(0, 0x1d, 0)
-#define PCIE_DEV_SLOT0 1
-#define PCIE_DEV_SLOT1 2
-#define PCIE_DEV_SLOT2 3
-#define PCIE_DEV_SLOT3 4
-
-/* PCI Configuration Space (D31:F0): LPC */
-#define SOC_LPC_DEV PCI_DEV(0, 0x1f, 0)
-#define SOC_LPC_DEVFN 0, PCI_DEVFN(0x1f,0)
-
-
-/* Southbridge IO BARs */
-#define ABASE 0x40 /* IO BAR */
-#define PBASE 0x44 /* MEM BAR */
-#define GBASE 0x48 /* IO BAR */
-#define IOBASE 0x4C /* MEM BAR */
-#define IBASE 0x50 /* MEM BAR */
-#define SBASE 0x54 /* MEM BAR */
-#define MPBASE 0x58 /* MEM BAR */
-#define SET_BAR_ENABLE 0x02
-
-/* Rangeley ILB defines */
-#define ILB_ACTL 0
-#define ILB_PIRQA_ROUT 0x8
-#define ILB_PIRQB_ROUT 0x9
-#define ILB_PIRQC_ROUT 0xA
-#define ILB_PIRQD_ROUT 0xB
-#define ILB_PIRQE_ROUT 0xC
-#define ILB_PIRQF_ROUT 0xD
-#define ILB_PIRQG_ROUT 0xE
-#define ILB_PIRQH_ROUT 0xF
-#define ILB_SERIRQ_CNTL 0x10
-#define ILB_IR00 0x20
-#define ILB_IR01 0x22
-#define ILB_IR02 0x24
-#define ILB_IR03 0x26
-#define ILB_IR04 0x28
-#define ILB_IR05 0x2A
-#define ILB_IR06 0x2C
-#define ILB_IR07 0x2E
-#define ILB_IR08 0x30
-#define ILB_IR09 0x32
-#define ILB_IR10 0x34
-#define ILB_IR11 0x36
-#define ILB_IR12 0x38
-#define ILB_IR13 0x3A
-#define ILB_IR14 0x3C
-#define ILB_IR15 0x3E
-#define ILB_IR16 0x40
-#define ILB_IR17 0x42
-#define ILB_IR18 0x44
-#define ILB_IR19 0x46
-#define ILB_IR20 0x48
-#define ILB_IR21 0x4A
-#define ILB_IR22 0x4C
-#define ILB_IR23 0x4E
-#define ILB_IR24 0x50
-#define ILB_IR25 0x52
-#define ILB_IR26 0x54
-#define ILB_IR27 0x56
-#define ILB_IR28 0x58
-#define ILB_IR29 0x5A
-#define ILB_IR30 0x5C
-#define ILB_IR31 0x5E
-#define ILB_OIC 0x60
-
-/* PCI Configuration Space (D31:F2/5) */
-#define SOC_SATA_DEV PCI_DEV(0, 0x17, 0)
-#define SOC_SATA2_DEV PCI_DEV(0, 0x18, 0)
-
-#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */
-#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */
-#define SATA_SP 0xd0 /* Scratchpad */
-#define SATA_MAP 0x90
-#define SATA_PSC 0x92
-
-/* SATA IOBP Registers */
-#define SATA_IOBP_SP0G3IR 0xea000151
-#define SATA_IOBP_SP1G3IR 0xea000051
-
-/* PCI Configuration Space (D31:F3): SMBus */
-#define SOC_SMBUS_DEV PCI_DEV(0, 0x1f, 3)
-#define SMB_BASE 0x20
-#define HOSTC 0x40
-#define SMB_RCV_SLVA 0x09
-
-/* HOSTC bits */
-#define I2C_EN (1 << 2)
-#define SMB_SMI_EN (1 << 1)
-#define HST_EN (1 << 0)
-
-/* SMBus I/O bits. */
-#define SMBHSTSTAT 0x0
-#define SMBHSTCTL 0x2
-#define SMBHSTCMD 0x3
-#define SMBXMITADD 0x4
-#define SMBHSTDAT0 0x5
-#define SMBHSTDAT1 0x6
-#define SMBBLKDAT 0x7
-#define SMBTRNSADD 0x9
-#define SMBSLVDATA 0xa
-#define SMLINK_PIN_CTL 0xe
-#define SMBUS_PIN_CTL 0xf
-
-#define SMBUS_TIMEOUT (10 * 1000 * 100)
-
-/* Root Complex Register Block */
-#define RCBA 0xf0
-#define RCBA_ENABLE 0x01
-
-#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x))
-#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x))
-#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x))
-
-#define RCBA_AND_OR(bits, x, and, or) \
- RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or))
-#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or)
-#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or)
-#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or)
-#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or)
-
-/* Root Port configuration space hide */
-#define RPFN_HIDE(port) (1 << (((port) * 4) + 3))
-/* Get the function number assigned to a Root Port */
-#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7)
-/* Set the function number for a Root Port */
-#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4))
-/* Root Port function number mask */
-#define RPFN_FNMASK(port) (7 << ((port) * 4))
-
-
-#define NOINT 0
-#define INTA 1
-#define INTB 2
-#define INTC 3
-#define INTD 4
-
-#define DIR_IDR 12 /* Interrupt D Pin Offset */
-#define DIR_ICR 8 /* Interrupt C Pin Offset */
-#define DIR_IBR 4 /* Interrupt B Pin Offset */
-#define DIR_IAR 0 /* Interrupt A Pin Offset */
-
-#define PIRQA 0
-#define PIRQB 1
-#define PIRQC 2
-#define PIRQD 3
-#define PIRQE 4
-#define PIRQF 5
-#define PIRQG 6
-#define PIRQH 7
-
-/* IO Buffer Programming */
-#define IOBPIRI 0x2330
-#define IOBPD 0x2334
-#define IOBPS 0x2338
-#define IOBPS_RW_BX ((1 << 9)|(1 << 10))
-#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10))
-#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10))
-
-
-
-#define DIR_ROUTE(x,a,b,c,d) \
- RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \
- ((b) << DIR_IBR) | ((a) << DIR_IAR))
-
-/* PBASE Registers */
-#define PMC_CFG 0x08
-#define SPS (1 << 5)
-#define NO_REBOOT (1 << 4)
-#define SX_ENT_TO_EN (1 << 3)
-#define TIMING_T581 (1 << 0)
-
-#define GEN_PMCON1 0x20
-# define DISB (1 << 23)
-# define MEM_SR (1 << 21)
-# define SRS (1 << 20)
-# define CTS (1 << 19)
-# define MS4V (1 << 18)
-# define PWR_FLR (1 << 16)
-# define PME_B0_S5_DIS (1 << 15)
-# define SUS_PWR_FLR (1 << 14)
-# define WOL_EN_OVRD (1 << 13)
-# define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
-# define GEN_RST_STS (1 << 9)
-# define RPS (1 << 2)
-# define AFTERG3_EN (1 << 0)
-
-/* Function Disable PBASE + 0x34 */
-#define PBASE_FUNC_DIS 0x34
-#define PBASE_DISABLE_QUICKASSIST (1 << 0)
-#define PBASE_DISABLE_GBE(x) (1 << (12 + x))
-#define PBASE_DISABLE_SATA2 (1 << 22)
-#define PBASE_DISABLE_EHCI (1 << 23)
-#define PBASE_DISABLE_SATA3 (1 << 23)
-
-/* GPIOBASE */
-#define GPIO_SC_USE_SEL 0x00
-#define GPIO_SC_IO_SEL 0x04
-#define GPIO_SC_GP_LVL 0x08
-#define GPIO_SC_TPE 0x0c
-#define GPIO_SC_TNE 0x10
-#define GPIO_SC_TS 0x14
-#define GPIO_SUS_USE_SEL 0x80
-#define GPIO_SUS_IO_SEL 0x84
-#define GPIO_SUS_GP_LVL 0x88
-#define GPIO_SUS_TPE 0x8c
-#define GPIO_SUS_TNE 0x90
-#define GPIO_SUS_TS 0x94
-#define GPIO_SUS_WE 0x98
-
-/* IOBASE */
-#define CFIO_PAD_CONF0 0x00
-#define CFIO_PAD_CONF1 0x04
-#define CFIO_PAD_VAL 0x08
-#define CFIO_PAD_DFT 0x0C
-
-/* ACPI BASE */
-#define PM1_STS 0x00
-#define WAK_STS (1 << 15)
-#define PCIEXPWAK_STS (1 << 14)
-#define PRBTNOR_STS (1 << 11)
-#define RTC_STS (1 << 10)
-#define PWRBTN_STS (1 << 8)
-#define GBL_STS (1 << 5)
-#define BM_STS (1 << 4)
-#define TMROF_STS (1 << 0)
-#define PM1_EN 0x02
-#define PCIEXPWAK_DIS (1 << 14)
-#define RTC_EN (1 << 10)
-#define PWRBTN_EN (1 << 8)
-#define GBL_EN (1 << 5)
-#define TMROF_EN (1 << 0)
-#define PM1_CNT 0x04
-#define SLP_EN (1 << 13)
-#define SLP_TYP (7 << 10)
-#define SLP_TYP_S0 0
-#define SLP_TYP_S1 1
-#define SLP_TYP_S3 5
-#define SLP_TYP_S4 6
-#define SLP_TYP_S5 7
-#define GBL_RLS (1 << 2)
-#define BM_RLD (1 << 1)
-#define SCI_EN (1 << 0)
-#define PM1_TMR 0x08
-#define PROC_CNT 0x10
-#define LV2 0x14
-#define LV3 0x15
-#define LV4 0x16
-#define PM2_CNT 0x50 // mobile only
-#define GPE0_STS 0x20
-#define PME_B0_STS (1 << 13)
-#define PME_STS (1 << 11)
-#define BATLOW_STS (1 << 10)
-#define PCI_EXP_STS (1 << 9)
-#define RI_STS (1 << 8)
-#define SMB_WAK_STS (1 << 7)
-#define TCOSCI_STS (1 << 6)
-#define SWGPE_STS (1 << 2)
-#define HOT_PLUG_STS (1 << 1)
-#define GPE0_EN 0x28
-#define PME_B0_EN (1 << 13)
-#define PME_EN (1 << 11)
-#define TCOSCI_EN (1 << 6)
-#define SMI_EN 0x30
-#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
-#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
-#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
-#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
-#define MCSMI_EN (1 << 11) // Trap microcontroller range access
-#define BIOS_RLS (1 << 7) // asserts SCI on bit set
-#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
-#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
-#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
-#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
-#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
-#define EOS (1 << 1) // End of SMI (deassert SMI#)
-#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
-#define SMI_STS 0x34
-#define ALT_GP_SMI_EN 0x38
-#define ALT_GP_SMI_STS 0x3a
-#define GPE_CNTL 0x42
-#define DEVACT_STS 0x44
-#define PM2A_CNT_BLK 0x50
-#define SS_CNT 0x50
-#define C3_RES 0x54
-#define TCO1_STS 0x64
-#define DMISCI_STS (1 << 9)
-#define TCO2_STS 0x66
-#define TCO1_CNT 0x68
-#define TCO_TMR_HALT (1 << 11)
-#define TCO_LOCK (1 << 12)
-
-/*
- * SPI Opcode Menu setup for SPIBAR lockdown
- * should support most common flash chips.
- */
-
-#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
-#define SPI_OPTYPE_0 0x01 /* Write, no address */
-
-#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
-#define SPI_OPTYPE_1 0x03 /* Write, address required */
-
-#define SPI_OPMENU_2 0x03 /* READ: Read Data */
-#define SPI_OPTYPE_2 0x02 /* Read, address required */
-
-#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
-#define SPI_OPTYPE_3 0x00 /* Read, no address */
-
-#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
-#define SPI_OPTYPE_4 0x03 /* Write, address required */
-
-#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
-#define SPI_OPTYPE_5 0x00 /* Read, no address */
-
-#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
-#define SPI_OPTYPE_6 0x03 /* Write, address required */
-
-#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
-#define SPI_OPTYPE_7 0x02 /* Read, address required */
-
-#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \
- (SPI_OPMENU_5 << 8) | SPI_OPMENU_4)
-#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \
- (SPI_OPMENU_1 << 8) | SPI_OPMENU_0)
-
-#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \
- (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
- (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
- (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0))
-
-#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
-
-#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
-#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */
-#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */
-#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */
-#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */
-#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */
-#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8)
-#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */
-#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */
-#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */
-#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */
-#define SPIBAR_FADDR 0x08 /* SPI flash address */
-#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */
-
-/* HPET Registers - Base is set in hardware to 0xFED00000 */
-#define HPET_GCID 0xFED00000 /* General Capabilities and ID */
-#define HPET_GCFG 0xFED00010 /* General Configuration */
-#define HPET_GIS 0xFED00020 /* General Interrupt Status */
-#define HPET_MCV 0xFED000F0 /* Main Counter Value */
-#define HPET_T0C 0xFED00100 /* Timer 0 Configuration and Capabilities */
-#define HPET_T0CV_L 0xFED00108 /* Lower Timer 0 Comparator Value */
-#define HPET_T0CV_U 0xFED0010C /* Upper Timer 0 Comparator Value */
-#define HPET_T1C 0xFED00120 /* Timer 1 Configuration and Capabilities */
-#define HPET_T1CV 0xFED00128 /* Timer 1 Comparator Value */
-#define HPET_T2C 0xFED00140 /* Timer 2 Configuration and Capabilities */
-#define HPET_T2CV 0xFED00148 /* Timer 2 Comparator Value */
-
-
-#endif /* __ACPI__ */
-#endif /* SOUTHBRIDGE_INTEL_RANGELEY_PCH_H */
diff --git a/src/southbridge/intel/fsp_rangeley/spi.c b/src/southbridge/intel/fsp_rangeley/spi.c
deleted file mode 100644
index 8a4eabce3c..0000000000
--- a/src/southbridge/intel/fsp_rangeley/spi.c
+++ /dev/null
@@ -1,753 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (C) 2013, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-/* This file is derived from the flashrom project. */
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <delay.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-
-#include <spi-generic.h>
-
-static int ich_status_poll(u16 bitmask, int wait_til_set);
-
-#ifdef __SMM__
-#include <arch/pci_mmio_cfg.h>
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#else /* !__SMM__ */
-#include <device/device.h>
-#include <device/pci.h>
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#endif /* !__SMM__ */
-
-typedef struct spi_slave ich_spi_slave;
-
-static int ichspi_lock = 0;
-
-typedef struct ich7_spi_regs {
- uint16_t spis;
- uint16_t spic;
- uint32_t spia;
- uint64_t spid[8];
- uint64_t _pad;
- uint32_t bbar;
- uint16_t preop;
- uint16_t optype;
- uint8_t opmenu[8];
-} __attribute__((packed)) ich7_spi_regs;
-
-typedef struct ich9_spi_regs {
- uint32_t bfpr; // 0
- uint16_t hsfs; // 4
- uint16_t hsfc; // 6
- uint32_t faddr; // 8
- uint32_t _reserved0; // 0xC
- uint32_t fdata[16]; // 0x10
- uint32_t frap; // 0x50
- uint32_t freg[5]; // 0x54
- uint32_t _reserved1[3]; // 0x67
- uint32_t pr[5]; // 0x74
- uint32_t _reserved2[2]; // 0x88
- uint8_t ssfs; // 0x90
- uint8_t ssfc[3]; // 0x91
- uint16_t preop; // 0x94
- uint16_t optype; // 0x96
- uint8_t opmenu[8]; // 0x98
- uint32_t bbar; // 0xB0
- uint8_t _reserved3[12];
- uint32_t fdoc;
- uint32_t fdod;
- uint8_t _reserved4[8];
- uint32_t afc;
- uint32_t lvscc;
- uint32_t uvscc;
- uint8_t _reserved5[4];
- uint32_t fpb;
- uint8_t _reserved6[28];
- uint32_t srdl;
- uint32_t srdc;
- uint32_t srd;
-} __attribute__((packed)) ich9_spi_regs;
-
-typedef struct ich10_spi_regs {
- uint32_t bfpr;
- uint16_t hsfs;
- uint16_t hsfc;
- uint32_t faddr;
- uint32_t _reserved0;
- uint32_t fdata[16];
- uint32_t fracc;
- uint32_t freg[5];
- uint32_t _reserved1[3];
- uint32_t pr[5];
- uint32_t _reserved2[2];
- uint8_t ssfs;
- uint8_t ssfc[3];
- uint16_t preop;
- uint16_t optype;
- uint8_t opmenu[8];
- uint8_t _reserved3[16];
- uint32_t fdoc;
- uint32_t fdod;
- uint8_t _reserved4[8];
- uint32_t afc;
- uint32_t lvscc;
- uint32_t uvscc;
- uint8_t _reserved5[4];
- uint32_t fpb;
- uint8_t _reserved6[36];
- uint32_t scs;
- uint32_t bcr;
- uint32_t tcgc;
-} __attribute__((packed)) ich10_spi_regs;
-
-typedef struct ich_spi_controller {
- int locked;
-
- uint8_t *opmenu;
- int menubytes;
- uint16_t *preop;
- uint16_t *optype;
- uint32_t *addr;
- uint8_t *data;
- unsigned databytes;
- uint8_t *status;
- uint16_t *control;
- uint32_t *bbar;
- uint8_t *bcr;
-} ich_spi_controller;
-
-static ich_spi_controller cntlr;
-
-enum {
- SPIS_SCIP = 0x0001,
- SPIS_GRANT = 0x0002,
- SPIS_CDS = 0x0004,
- SPIS_FCERR = 0x0008,
- SSFS_AEL = 0x0010,
- SPIS_LOCK = 0x8000,
- SPIS_RESERVED_MASK = 0x7ff0,
- SSFS_RESERVED_MASK = 0x7fe2
-};
-
-enum {
- SPIC_SCGO = 0x000002,
- SPIC_ACS = 0x000004,
- SPIC_SPOP = 0x000008,
- SPIC_DBC = 0x003f00,
- SPIC_DS = 0x004000,
- SPIC_SME = 0x008000,
- SSFC_SCF_MASK = 0x070000,
- SSFC_RESERVED = 0xf80000
-};
-
-enum {
- HSFS_FDONE = 0x0001,
- HSFS_FCERR = 0x0002,
- HSFS_AEL = 0x0004,
- HSFS_BERASE_MASK = 0x0018,
- HSFS_BERASE_SHIFT = 3,
- HSFS_SCIP = 0x0020,
- HSFS_FDOPSS = 0x2000,
- HSFS_FDV = 0x4000,
- HSFS_FLOCKDN = 0x8000
-};
-
-enum {
- HSFC_FGO = 0x0001,
- HSFC_FCYCLE_MASK = 0x0006,
- HSFC_FCYCLE_SHIFT = 1,
- HSFC_FDBC_MASK = 0x3f00,
- HSFC_FDBC_SHIFT = 8,
- HSFC_FSMIE = 0x8000
-};
-
-enum {
- BCR_BIOSWE = 0x0001,
- BCR_BLE = 0x0002,
- BCR_SRC_MASK = 0x000c,
- BCR_SRC_SHIFT = 0x0002,
- BCR_SRC_NO_PREF = 0x0000,
- BCR_SRC_NO_PREF_CACHE = 0x0004,
- BCR_SRC_EN_PREF_CACHE = 0x0008,
- BCR_TSS = 0x0010,
- BCR_SMMBWP = 0x0020,
- BCR_RESERVED_MASK = 0xffc0
-};
-
-enum {
- SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
- SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
- SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
- SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3,
-};
-
-#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
-
-static u8 readb_(const void *addr)
-{
- u8 v = read8(addr);
- printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static u16 readw_(const void *addr)
-{
- u16 v = read16(addr);
- printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static u32 readl_(const void *addr)
-{
- u32 v = read32(addr);
- printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
- v, ((unsigned) addr & 0xffff) - 0xf020);
- return v;
-}
-
-static void writeb_(u8 b, const void *addr)
-{
- write8(addr, b);
- printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writew_(u16 b, const void *addr)
-{
- write16(addr, b);
- printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-static void writel_(u32 b, const void *addr)
-{
- write32((unsigned long)addr, b);
- printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
- b, ((unsigned) addr & 0xffff) - 0xf020);
-}
-
-#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
-
-#define readb_(a) read8(a)
-#define readw_(a) read16(a)
-#define readl_(a) read32(a)
-#define writeb_(val, addr) write8(addr, val)
-#define writew_(val, addr) write16(addr, val)
-#define writel_(val, addr) write32(addr, val)
-
-#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
- const uint8_t *bvalue = value;
- uint8_t *bdest = dest;
-
- while (size >= 4) {
- writel_(*(const uint32_t *)bvalue, bdest);
- bdest += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- writeb_(*bvalue, bdest);
- bdest++; bvalue++; size--;
- }
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
- const uint8_t *bsrc = src;
- uint8_t *bvalue = value;
-
- while (size >= 4) {
- *(uint32_t *)bvalue = readl_(bsrc);
- bsrc += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- *bvalue = readb_(bsrc);
- bsrc++; bvalue++; size--;
- }
-}
-
-static void ich_set_bbar(uint32_t minaddr)
-{
- const uint32_t bbar_mask = 0x00ffff00;
- uint32_t ichspi_bbar;
-
- if (cntlr.bbar == NULL)
- return;
-
- minaddr &= bbar_mask;
- ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
- ichspi_bbar |= minaddr;
- writel_(ichspi_bbar, cntlr.bbar);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
-{
- ich_spi_slave *slave = malloc(sizeof(*slave));
-
- if (!slave) {
- printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n");
- return NULL;
- }
-
- memset(slave, 0, sizeof(*slave));
-
- slave->bus = bus;
- slave->cs = cs;
- return slave;
-}
-
-/*
- * Check if this device ID matches one of supported Intel SOC devices.
- *
- * Return the ICH version if there is a match, or zero otherwise.
- */
-static inline int get_ich_version(uint16_t device_id)
-{
-
- if ((device_id >= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MIN &&
- device_id <= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MAX))
- return 10;
-
- return 0;
-}
-
-void spi_init(void)
-{
- int ich_version = 0;
- uint8_t bios_cntl;
- device_t dev;
- uint32_t ids;
- uint16_t vendor_id, device_id;
-
-#ifdef __SMM__
- dev = PCI_DEV(0, 31, 0);
-#else
- dev = dev_find_slot(0, PCI_DEVFN(31, 0));
-#endif
- pci_read_config_dword(dev, 0, &ids);
- vendor_id = ids;
- device_id = (ids >> 16);
-
- if (vendor_id != PCI_VENDOR_ID_INTEL) {
- printk(BIOS_DEBUG, "SPI: No SOC found.\n");
- return;
- }
-
- ich_version = get_ich_version(device_id);
-
- if (!ich_version) {
- printk(BIOS_DEBUG, "SPI: No known SOC found.\n");
- return;
- }
-
- switch (ich_version) {
- case 10:
- {
- uint8_t *spibase; /* SPI Base Address */
- uint32_t sbase; /* SPI Base Address Register */
- pci_read_config_dword(dev, 0x54, &sbase);
- /* Bits 31-9 are the base address, 8-4 are reserved, 3-0 are used. */
- spibase = (uint8_t *)(sbase & 0xffffff00);
- ich10_spi_regs *ich10_spi =
- (ich10_spi_regs *)(spibase);
- ichspi_lock = readw_(&ich10_spi->hsfs) & HSFS_FLOCKDN;
- cntlr.opmenu = ich10_spi->opmenu;
- cntlr.menubytes = sizeof(ich10_spi->opmenu);
- cntlr.optype = &ich10_spi->optype;
- cntlr.addr = &ich10_spi->faddr;
- cntlr.data = (uint8_t *)ich10_spi->fdata;
- cntlr.databytes = sizeof(ich10_spi->fdata);
- cntlr.status = &ich10_spi->ssfs;
- cntlr.control = (uint16_t *)ich10_spi->ssfc;
- cntlr.bbar = NULL;
- cntlr.preop = &ich10_spi->preop;
- cntlr.bcr = (uint8_t *)&ich10_spi->bcr;
- break;
- }
- default:
- printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version);
- }
-
- ich_set_bbar(0);
-
- /* Disable the BIOS write protect so write commands are allowed. */
- switch (ich_version) {
- case 10:
- {
- /* Deassert SMM BIOS write protect(SMM BWP) and assert enable flash write(BIOSWE) */
- bios_cntl = readb_(cntlr.bcr);
- bios_cntl &= ~BCR_SMMBWP;
- bios_cntl |= BCR_BIOSWE;
- writeb_(bios_cntl, cntlr.bcr);
- break;
- }
-
- default:
- break;
- }
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- /* Handled by ICH automatically. */
-}
-
-typedef struct spi_transaction {
- const uint8_t *out;
- uint32_t bytesout;
- uint8_t *in;
- uint32_t bytesin;
- uint8_t type;
- uint8_t opcode;
- uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned bytes)
-{
- trans->out += bytes;
- trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned bytes)
-{
- trans->in += bytes;
- trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
- trans->type = 0xFF;
-
- /* Try to guess spi type from read/write sizes. */
- if (trans->bytesin == 0) {
- if (trans->bytesout > 4)
- /*
- * If bytesin = 0 and bytesout > 4, we presume this is
- * a write data operation, which is accompanied by an
- * address.
- */
- trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
- else
- trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 1) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 4) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- }
-
- /* Fast read command is called with 5 bytes instead of 4 */
- if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- --trans->bytesout;
- }
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
- uint16_t optypes;
- uint8_t opmenu[cntlr.menubytes];
-
- trans->opcode = trans->out[0];
- spi_use_out(trans, 1);
- if (!ichspi_lock) {
- /* The lock is off, so just use index 0. */
- writeb_(trans->opcode, cntlr.opmenu);
- optypes = readw_(cntlr.optype);
- optypes = (optypes & 0xfffc) | (trans->type & 0x3);
- writew_(optypes, cntlr.optype);
- return 0;
- } else {
- /* The lock is on. See if what we need is on the menu. */
- uint8_t optype;
- uint16_t opcode_index;
-
- /* Write Enable is handled as atomic prefix */
- if (trans->opcode == SPI_OPCODE_WREN)
- return 0;
-
- read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < cntlr.menubytes;
- opcode_index++) {
- if (opmenu[opcode_index] == trans->opcode)
- break;
- }
-
- if (opcode_index == cntlr.menubytes) {
- printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
- trans->opcode);
- return -1;
- }
-
- optypes = readw_(cntlr.optype);
- optype = (optypes >> (opcode_index * 2)) & 0x3;
- if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
- optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
- trans->bytesout >= 3) {
- /* We guessed wrong earlier. Fix it up. */
- trans->type = optype;
- }
- if (optype != trans->type) {
- printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
- optype);
- return -1;
- }
- return opcode_index;
- }
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
- /* Separate the SPI address and data. */
- switch (trans->type) {
- case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
- return 0;
- case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
- trans->offset = ((uint32_t)trans->out[0] << 16) |
- ((uint32_t)trans->out[1] << 8) |
- ((uint32_t)trans->out[2] << 0);
- spi_use_out(trans, 3);
- return 1;
- default:
- printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
- return -1;
- }
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(u16 bitmask, int wait_til_set)
-{
- int timeout = 60000; /* This will result in 600 ms */
- u16 status = 0;
-
- while (timeout--) {
- status = readw_(cntlr.status);
- if (wait_til_set ^ ((status & bitmask) == 0)) {
- if (wait_til_set)
- writew_((status & bitmask), cntlr.status);
- return status;
- }
- udelay(10);
- }
-
- printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
- status, bitmask);
- return -1;
-}
-
-unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len)
-{
- return min(cntlr.databytes, buf_len);
-}
-
-int spi_xfer(struct spi_slave *slave, const void *dout,
- unsigned int bytesout, void *din, unsigned int bytesin)
-{
- uint16_t control;
- int16_t opcode_index;
- int with_address;
- int status;
-
- spi_transaction trans = {
- dout, bytesout,
- din, bytesin,
- 0xff, 0xff, 0
- };
-
- /* There has to always at least be an opcode. */
- if (!bytesout || !dout) {
- printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
- return -1;
- }
- /* Make sure if we read something we have a place to put it. */
- if (bytesin != 0 && !din) {
- printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
- return -1;
- }
-
- if (ich_status_poll(SPIS_SCIP, 0) == -1)
- return -1;
-
- writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
-
- spi_setup_type(&trans);
- if ((opcode_index = spi_setup_opcode(&trans)) < 0)
- return -1;
- if ((with_address = spi_setup_offset(&trans)) < 0)
- return -1;
-
- if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) {
- /*
- * Treat Write Enable as Atomic Pre-Op if possible
- * in order to prevent the Management Engine from
- * issuing a transaction between WREN and DATA.
- */
- writew_(trans.opcode, cntlr.preop);
- return 0;
- }
-
- /* Preset control fields */
- control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
- /* Issue atomic preop cycle if needed */
- if (readw_(cntlr.preop))
- control |= SPIC_ACS;
-
- if (!trans.bytesout && !trans.bytesin) {
- /* SPI addresses are 24 bit only */
- if (with_address)
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- /*
- * This is a 'no data' command (like Write Enable), its
- * bitesout size was 1, decremented to zero while executing
- * spi_setup_opcode() above. Tell the chip to send the
- * command.
- */
- writew_(control, cntlr.control);
-
- /* wait for the result */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
- return -1;
- }
-
- goto spi_xfer_exit;
- }
-
- /*
- * Check if this is a write command attempting to transfer more bytes
- * than the controller can handle. Iterations for writes are not
- * supported here because each SPI write command needs to be preceded
- * and followed by other SPI commands, and this sequence is controlled
- * by the SPI chip driver.
- */
- if (trans.bytesout > cntlr.databytes) {
- printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
- " spi_crop_chunk()?\n");
- return -1;
- }
-
- /*
- * Read or write up to databytes bytes at a time until everything has
- * been sent.
- */
- while (trans.bytesout || trans.bytesin) {
- uint32_t data_length;
-
- /* SPI addresses are 24 bit only */
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- if (trans.bytesout)
- data_length = min(trans.bytesout, cntlr.databytes);
- else
- data_length = min(trans.bytesin, cntlr.databytes);
-
- /* Program data into FDATA0 to N */
- if (trans.bytesout) {
- write_reg(trans.out, cntlr.data, data_length);
- spi_use_out(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
-
- /* Add proper control fields' values */
- control &= ~((cntlr.databytes - 1) << 8);
- control |= SPIC_DS;
- control |= (data_length - 1) << 8;
-
- /* write it */
- writew_(control, cntlr.control);
-
- /* Wait for Cycle Done Status or Flash Cycle Error. */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
- return -1;
- }
-
- if (trans.bytesin) {
- read_reg(cntlr.data, trans.in, data_length);
- spi_use_in(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
- }
-
-spi_xfer_exit:
- /* Clear atomic preop now that xfer is done */
- writew_(0, cntlr.preop);
-
- return 0;
-}
diff --git a/src/southbridge/intel/fsp_rangeley/watchdog.c b/src/southbridge/intel/fsp_rangeley/watchdog.c
deleted file mode 100644
index 1ea4985769..0000000000
--- a/src/southbridge/intel/fsp_rangeley/watchdog.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2011 Google Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <watchdog.h>
-#include "soc.h"
-
-void watchdog_off(void)
-{
- device_t dev;
- u32 value, abase;
-
- /* Turn off the watchdog. */
- dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0));
-
- /* Enable I/O space. */
- value = pci_read_config16(dev, 0x04);
- value |= 1;
- pci_write_config16(dev, 0x04, value);
-
- /* Get TCO base. */
- abase = (pci_read_config32(dev, ABASE) & ~0xf);
-
- /* Disable the watchdog timer. */
- value = inw(abase + 0x68);
- value |= 1 << 11;
- outw(value, abase + 0x68);
-
- /* Clear TCO timeout status. */
- outw(0x0008, abase + 0x64);
- outw(0x0002, abase + 0x66);
-
- printk(BIOS_DEBUG, "TCO Watchdog disabled\n");
-}