summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i3100/smbus.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/i3100/smbus.h')
-rw-r--r--src/southbridge/intel/i3100/smbus.h112
1 files changed, 112 insertions, 0 deletions
diff --git a/src/southbridge/intel/i3100/smbus.h b/src/southbridge/intel/i3100/smbus.h
new file mode 100644
index 0000000000..7023a5b751
--- /dev/null
+++ b/src/southbridge/intel/i3100/smbus.h
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This code is based on src/southbridge/intel/esb6300/esb6300_smbus.h */
+
+#include <device/smbus_def.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+#define SMBSLVCMD 0x11
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+static void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+ u32 loops = SMBUS_TIMEOUT;
+ u8 byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_io_base + SMBHSTSTAT);
+ } while (byte & 1);
+ return loops ? 0 : -1;
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+ u32 loops = SMBUS_TIMEOUT;
+ u8 byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_io_base + SMBHSTSTAT);
+ } while ((byte & 1) || (byte & ~((1 << 6)|(1 << 0))) == 0);
+ return loops ? 0 : -1;
+}
+
+static int do_smbus_read_byte(u32 smbus_io_base, u16 device, u8 address)
+{
+ u8 global_status_register;
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(smbus_io_base + SMBHSTCTL) & (~1), smbus_io_base + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBXMITADD);
+ /* set the command/address... */
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(smbus_io_base + SMBHSTCTL) & 0xE3) | (0x2 << 2), smbus_io_base + SMBHSTCTL);
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_io_base + SMBHSTSTAT), smbus_io_base + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, smbus_io_base + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(smbus_io_base + SMBHSTCTL) | 0x40), smbus_io_base + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inb(smbus_io_base + SMBHSTSTAT);
+
+ /* Ignore the In Use Status... */
+ global_status_register &= ~(3 << 5);
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT0);
+ if (global_status_register != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}