summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801cx/lpc.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/i82801cx/lpc.c')
-rw-r--r--src/southbridge/intel/i82801cx/lpc.c245
1 files changed, 245 insertions, 0 deletions
diff --git a/src/southbridge/intel/i82801cx/lpc.c b/src/southbridge/intel/i82801cx/lpc.c
new file mode 100644
index 0000000000..a1ffb8f540
--- /dev/null
+++ b/src/southbridge/intel/i82801cx/lpc.c
@@ -0,0 +1,245 @@
+/*
+ * (C) 2003 Linux Networx, SuSE Linux AG
+ * (C) 2004 Tyan Computer
+ * (c) 2005 Digital Design Corporation
+ */
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include "i82801cx.h"
+
+#define NMI_OFF 0
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+
+static void i82801cx_enable_ioapic( struct device *dev)
+{
+ uint32_t dword;
+ volatile uint32_t* ioapic_index = (volatile uint32_t*)IO_APIC_ADDR;
+ volatile uint32_t* ioapic_data = (volatile uint32_t*)(IO_APIC_ADDR + 0x10);
+
+ dword = pci_read_config32(dev, GEN_CNTL);
+ dword |= (3 << 7); /* enable ioapic & disable SMBus interrupts */
+ dword |= (1 <<13); /* coprocessor error enable */
+ dword |= (1 << 1); /* delay transaction enable */
+ dword |= (1 << 2); /* DMA collection buf enable */
+ pci_write_config32(dev, GEN_CNTL, dword);
+ printk(BIOS_DEBUG, "ioapic southbridge enabled %x\n",dword);
+
+ // Must program the APIC's ID before using it
+
+ *ioapic_index = 0; // Select APIC ID register
+ *ioapic_data = (2<<24);
+
+ // Hang if the ID didn't take (chip not present?)
+ *ioapic_index = 0;
+ dword = *ioapic_data;
+ printk(BIOS_DEBUG, "Southbridge apic id = %x\n", (dword>>24) & 0xF);
+ if(dword != (2<<24))
+ die("");
+
+ *ioapic_index = 3; // Select Boot Configuration register
+ *ioapic_data = 1; // Use Processor System Bus to deliver interrupts
+}
+
+// This is how interrupts are received from the Super I/O chip
+static void i82801cx_enable_serial_irqs( struct device *dev)
+{
+ // Recognize serial IRQs, continuous mode, frame size 21, 4 clock start frame pulse width
+ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0<< 0));
+}
+
+/**
+ * Route all DMA channels to either PCI or LPC.
+ *
+ * @param dev TODO
+ * @param mask Identifies whether each channel should be used for PCI DMA
+ * (bit = 0) or LPC DMA (bit = 1). The LSb controls channel 0.
+ * Channel 4 is not used (reserved).
+ */
+static void i82801cx_lpc_route_dma( struct device *dev, uint8_t mask)
+{
+ uint16_t dmaConfig;
+ int channelIndex;
+
+ dmaConfig = pci_read_config16(dev, PCI_DMA_CFG);
+ dmaConfig &= 0x300; // Preserve reserved bits
+ for(channelIndex = 0; channelIndex < 8; channelIndex++) {
+ if (channelIndex == 4)
+ continue; // Register doesn't support channel 4
+ dmaConfig |= ((mask & (1 << channelIndex))? 3:1) << (channelIndex*2);
+ }
+ pci_write_config16(dev, PCI_DMA_CFG, dmaConfig);
+}
+
+static void i82801cx_rtc_init(struct device *dev)
+{
+ uint32_t dword;
+ int rtc_failed;
+ int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ uint8_t pmcon3 = pci_read_config8(dev, GEN_PMCON_3);
+
+ rtc_failed = pmcon3 & RTC_BATTERY_DEAD;
+ if (rtc_failed) {
+ // Clear the RTC_BATTERY_DEAD bit, but preserve
+ // the RTC_POWER_FAILED, G3 state, and reserved bits
+ // NOTE: RTC_BATTERY_DEAD and RTC_POWER_FAILED are "write-1-clear" bits
+ pmcon3 &= ~RTC_POWER_FAILED;
+ }
+
+ get_option(&pwr_on, "power_on_after_fail");
+ pmcon3 &= ~SLEEP_AFTER_POWER_FAIL;
+ if (!pwr_on) {
+ pmcon3 |= SLEEP_AFTER_POWER_FAIL;
+ }
+ pci_write_config8(dev, GEN_PMCON_3, pmcon3);
+ printk(BIOS_INFO, "set power %s after power fail\n",
+ pwr_on ? "on" : "off");
+
+ // See if the Safe Mode jumper is set
+ dword = pci_read_config32(dev, GEN_STS);
+ rtc_failed |= dword & (1 << 2);
+
+ rtc_init(rtc_failed);
+}
+
+
+static void i82801cx_1f0_misc(struct device *dev)
+{
+ // Prevent LPC disabling, enable parity errors, and SERR# (System Error)
+ pci_write_config16(dev, PCI_COMMAND, 0x014f);
+
+ // Set ACPI base address to 0x1100 (I/O space)
+ pci_write_config32(dev, PMBASE, 0x00001101);
+
+ // Enable ACPI I/O and power management
+ pci_write_config8(dev, ACPI_CNTL, 0x10);
+
+ // Set GPIO base address to 0x1180 (I/O space)
+ pci_write_config32(dev, GPIO_BASE, 0x00001181);
+
+ // Enable GPIO
+ pci_write_config8(dev, GPIO_CNTL, 0x10);
+
+ // Route PIRQA to IRQ11, PIRQB to IRQ3, PIRQC to IRQ5, PIRQD to IRQ10
+ pci_write_config32(dev, PIRQA_ROUT, 0x0A05030B);
+
+ // Route PIRQE to IRQ7. Leave PIRQF - PIRQH unrouted.
+ pci_write_config8(dev, PIRQE_ROUT, 0x07);
+
+ // Enable access to the upper 128 byte bank of CMOS RAM
+ pci_write_config8(dev, RTC_CONF, 0x04);
+
+ // Decode 0x3F8-0x3FF (COM1) for COMA port,
+ // 0x2F8-0x2FF (COM2) for COMB
+ pci_write_config8(dev, COM_DEC, 0x10);
+
+ // LPT decode defaults to 0x378-0x37F and 0x778-0x77F
+ // Floppy decode defaults to 0x3F0-0x3F5, 0x3F7
+
+ // Enable COMA, COMB, LPT, floppy;
+ // disable microcontroller, Super I/O, sound, gameport
+ pci_write_config16(dev, LPC_EN, 0x000F);
+}
+
+static void lpc_init(struct device *dev)
+{
+ uint8_t byte;
+ int pwr_on=-1;
+ int nmi_option;
+
+ /* IO APIC initialization */
+ i82801cx_enable_ioapic(dev);
+
+ i82801cx_enable_serial_irqs(dev);
+
+ /* power after power fail */
+ /* FIXME this doesn't work! */
+ /* Which state do we want to goto after g3 (power restored)?
+ * 0 == S0 Full On
+ * 1 == S5 Soft Off
+ */
+ byte = pci_read_config8(dev, GEN_PMCON_3);
+ if (pwr_on)
+ byte &= ~1; // Return to S0 (boot) after power is re-applied
+ else
+ byte |= 1; // Return to S5
+ pci_write_config8(dev, GEN_PMCON_3, byte);
+ printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off");
+
+ /* Set up NMI on errors */
+ byte = inb(0x61);
+ byte &= ~(1 << 3); /* IOCHK# NMI Enable */
+ byte &= ~(1 << 2); /* PCI SERR# Enable */
+ outb(byte, 0x61);
+ byte = inb(0x70);
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ byte &= ~(1 << 7); /* set NMI */
+ outb(byte, 0x70);
+ }
+
+ /* Initialize the real time clock */
+ i82801cx_rtc_init(dev);
+
+ i82801cx_lpc_route_dma(dev, 0xff);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ i82801cx_1f0_misc(dev);
+}
+
+static void i82801cx_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = IO_APIC_ADDR;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static struct device_operations lpc_ops = {
+ .read_resources = i82801cx_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+ .enable = 0,
+};
+
+static const struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801CA_LPC,
+};