1 files changed, 0 insertions, 101 deletions
diff --git a/src/southbridge/intel/i82801dx/smbus.c b/src/southbridge/intel/i82801dx/smbus.c
deleted file mode 100644
index 441b45a98d..0000000000
--- a/src/southbridge/intel/i82801dx/smbus.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2004 Ronald G. Minnich
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "i82801dx.h"
-#include <smbus.h>
-#include <pci.h>
-#include <arch/io.h>
-
-#define PM_BUS 0
-#define PM_DEVFN PCI_DEVFN(0x1f,3)
-
-void smbus_enable(void)
-{
-	unsigned char byte;
-	/* iobase addr */
-	pcibios_write_config_dword(PM_BUS, PM_DEVFN, 0x20, SMBUS_IO_BASE | 1);
-	/* smbus enable */
-	pcibios_write_config_byte(PM_BUS, PM_DEVFN, 0x40, 1);
-	/* iospace enable */
-	pcibios_write_config_word(PM_BUS, PM_DEVFN, 0x4, 1);
-
-	/* Disable interrupt generation */
-	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
-
-}
-
-void smbus_setup(void)
-{
-	outb(0, SMBUS_IO_BASE + SMBHSTSTAT);
-}
-
-static void smbus_wait_until_ready(void)
-{
-	while ((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
-		/* nop */
-	}
-}
-
-static void smbus_wait_until_done(void)
-{
-	unsigned char byte;
-	do {
-		byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-	while ((byte & 1) == 1);
-	while ((byte & ~1) == 0) {
-		byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-}
-
-int smbus_read_byte(unsigned device, unsigned address, unsigned char *result)
-{
-	unsigned char host_status_register;
-	unsigned char byte;
-
-	smbus_wait_until_ready();
-
-	/* setup transaction */
-	/* disable interrupts */
-	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
-	/* set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
-	/* set the command/address... */
-	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
-	/* set up for a byte data read */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2),
-	     SMBUS_IO_BASE + SMBHSTCTL);
-
-	/* clear any lingering errors, so the transaction will run */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-
-	/* clear the data byte... */
-	outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
-
-	/* start the command */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
-	     SMBUS_IO_BASE + SMBHSTCTL);
-
-	/* poll for transaction completion */
-	smbus_wait_until_done();
-
-	host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-
-	/* read results of transaction */
-	byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
-
-	*result = byte;
-	return host_status_register != 0x02;
-}