diff options
Diffstat (limited to 'src/southbridge/intel/i82801ex/i82801ex_early_smbus.c')
-rw-r--r-- | src/southbridge/intel/i82801ex/i82801ex_early_smbus.c | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c new file mode 100644 index 0000000000..c86bf23bb7 --- /dev/null +++ b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c @@ -0,0 +1,131 @@ +#include "i82801ex_smbus.h" + +#define SMBUS_IO_BASE 0x0f00 + +static void enable_smbus(void) +{ + device_t dev = PCI_DEV(0x0, 0x1f, 0x3); + + print_spew("SMBus controller enabled\r\n"); + + pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1); + print_debug_hex32(pci_read_config32(dev, 0x20)); + /* Set smbus enable */ + pci_write_config8(dev, 0x40, 1); + /* Set smbus iospace enable */ + pci_write_config8(dev, 0x4, 1); + /* SMBALERT_DIS */ + pci_write_config8(dev, 0x11, 4); + + /* Disable interrupt generation */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); +} + +static int smbus_read_byte(unsigned device, unsigned address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +static void smbus_write_byte(unsigned device, unsigned address, unsigned char val) +{ + if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) { + return; + } + + print_debug("Unimplemented smbus_write_byte() called.\r\n"); + +#if 0 + /* setup transaction */ + /* disable interrupts */ + outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), + SMBUS_IO_BASE + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR); + outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); + /* set up for a byte data write */ /* FIXME */ + outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x1), SMBUS_IO_BASE + SMBGCTL); + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS); + + /* clear the data word...*/ + outw(val, SMBUS_IO_BASE + SMBHSTDAT); + + /* start the command */ + outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL); + + /* poll for transaction completion */ + smbus_wait_until_done(SMBUS_IO_BASE); +#endif + return; +} + +static int smbus_write_block(unsigned device, unsigned length, unsigned cmd, + unsigned data1, unsigned data2) +{ + unsigned char global_control_register; + unsigned char global_status_register; + unsigned char byte; + unsigned char stat; + int i; + + /* chear the PM timeout flags, SECOND_TO_STS */ + outw(inw(0x0400 + 0x66), 0x0400 + 0x66); + + if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) { + return -2; + } + + /* setup transaction */ + /* Obtain ownership */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + for(stat=0;(stat&0x40)==0;) { + stat = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } + /* clear the done bit */ + outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT); + /* disable interrupts */ + outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD); + + /* set the command address */ + outb(cmd & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); + + /* set the block length */ + outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0); + + /* try sending out the first byte of data here */ + byte=(data1>>(0))&0x0ff; + outb(byte,SMBUS_IO_BASE + SMBBLKDAT); + /* issue a block write command */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40, + SMBUS_IO_BASE + SMBHSTCTL); + + for(i=0;i<length;i++) { + + /* poll for transaction completion */ + if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) { + return -3; + } + + /* load the next byte */ + if(i>3) + byte=(data2>>(i%4))&0x0ff; + else + byte=(data1>>(i))&0x0ff; + outb(byte,SMBUS_IO_BASE + SMBBLKDAT); + + /* clear the done bit */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), + SMBUS_IO_BASE + SMBHSTSTAT); + } + + print_debug("SMBUS Block complete\r\n"); + return 0; +} + |