diff options
Diffstat (limited to 'src/southbridge/intel/i82801gx/i82801gx_lpc.c')
| -rw-r--r-- | src/southbridge/intel/i82801gx/i82801gx_lpc.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c index ccab5482c9..f0e48ec29e 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_lpc.c +++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c @@ -52,16 +52,16 @@ static void i82801gx_enable_apic(struct device *dev) *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); if (reg32 != (1 << 25)) die("APIC Error\n"); - printk_spew("Dumping IOAPIC registers\n"); + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; - printk_spew(" reg 0x%04x:", i); + printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; - printk_spew(" 0x%08x\n", reg32); + printk(BIOS_SPEW, " 0x%08x\n", reg32); } *ioapic_index = 3; /* Select Boot Configuration register. */ @@ -213,7 +213,7 @@ static void i82801gx_power_options(device_t dev) reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */ pci_write_config8(dev, GEN_PMCON_3, reg8); - printk_info("Set power %s after power failure.\n", state); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); @@ -227,10 +227,10 @@ static void i82801gx_power_options(device_t dev) nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { - printk_info ("NMI sources enabled.\n"); + printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { - printk_info ("NMI sources disabled.\n"); + printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); @@ -296,7 +296,7 @@ static void i82801gx_rtc_init(struct device *dev) reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, GEN_PMCON_3, reg8); } - printk_debug("rtc_failed = 0x%x\n", rtc_failed); + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); rtc_init(rtc_failed); } @@ -340,13 +340,13 @@ static void i82801gx_lock_smm(struct device *dev) #endif #if ENABLE_ACPI_MODE_IN_COREBOOT - printk_debug("Enabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); outb(0xe1, 0xb2); // Enable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #else - printk_debug("Disabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); outb(0x1e, 0xb2); // Disable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif /* Don't allow evil boot loaders, kernels, or * userspace applications to deceive us: @@ -355,29 +355,29 @@ static void i82801gx_lock_smm(struct device *dev) #if TEST_SMM_FLASH_LOCKDOWN /* Now try this: */ - printk_debug("Locking BIOS to RO... "); + printk(BIOS_DEBUG, "Locking BIOS to RO... "); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); reg8 &= ~(1 << 0); /* clear BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 |= (1 << 1); /* set BLE */ pci_write_config8(dev, 0xdc, reg8); - printk_debug("ok.\n"); + printk(BIOS_DEBUG, "ok.\n"); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Writing:\n"); + printk(BIOS_DEBUG, "Writing:\n"); *(volatile u8 *)0xfff00000 = 0x00; - printk_debug("Testing:\n"); + printk(BIOS_DEBUG, "Testing:\n"); reg8 |= (1 << 0); /* set BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Done.\n"); + printk(BIOS_DEBUG, "Done.\n"); #endif } #endif @@ -406,7 +406,7 @@ static void i82801gx_fixups(struct device *dev) static void lpc_init(struct device *dev) { - printk_debug("i82801gx: lpc_init\n"); + printk(BIOS_DEBUG, "i82801gx: lpc_init\n"); /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); |