summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/lynxpoint/smihandler.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/lynxpoint/smihandler.c')
-rw-r--r--src/southbridge/intel/lynxpoint/smihandler.c801
1 files changed, 801 insertions, 0 deletions
diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c
new file mode 100644
index 0000000000..c5c2c3ec15
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/smihandler.c
@@ -0,0 +1,801 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <device/pci_def.h>
+#include <cpu/x86/smm.h>
+#include <elog.h>
+#include <pc80/mc146818rtc.h>
+#include "pch.h"
+
+#include "nvs.h"
+
+/* We are using PCIe accesses for now
+ * 1. the chipset can do it
+ * 2. we don't need to worry about how we leave 0xcf8/0xcfc behind
+ */
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/pcie_config.c>
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+static u16 pmbase = DEFAULT_PMBASE;
+u16 smm_get_pmbase(void)
+{
+ return pmbase;
+}
+
+static u8 smm_initialized = 0;
+
+/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
+ * by coreboot.
+ */
+static global_nvs_t *gnvs = (global_nvs_t *)0x0;
+global_nvs_t *smm_get_gnvs(void)
+{
+ return gnvs;
+}
+
+#if CONFIG_SMM_TSEG
+static u32 tseg_base = 0;
+u32 smi_get_tseg_base(void)
+{
+ if (!tseg_base)
+ tseg_base = pcie_read_config32(PCI_DEV(0, 0, 0), TSEG) & ~1;
+ return tseg_base;
+}
+void tseg_relocate(void **ptr)
+{
+ /* Adjust pointer with TSEG base */
+ if (*ptr && *ptr < (void*)smi_get_tseg_base())
+ *ptr = (void *)(((u8*)*ptr) + smi_get_tseg_base());
+}
+#endif
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+ u16 reg16;
+
+ reg16 = inw(pmbase + PM1_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outw(reg16, pmbase + PM1_STS);
+
+ return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+ printk(BIOS_SPEW, "PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
+ if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
+ if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL ");
+ if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM ");
+ if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF ");
+ printk(BIOS_SPEW, "\n");
+ int reg16 = inw(pmbase + PM1_EN);
+ printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + SMI_STS);
+
+ return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+ if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+ if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+ if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+ if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+ if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+ if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+ if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
+ if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
+ if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
+ if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + GPE0_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + GPE0_STS);
+
+ return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+ int i;
+ printk(BIOS_DEBUG, "GPE0_STS: ");
+ for (i=31; i<= 16; i--) {
+ if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+ }
+ if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+ if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+ if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+ if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
+ if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
+ if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
+ if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
+ if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");
+ if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG ");
+ if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = pmbase + 0x60;
+ u32 reg32;
+
+ reg32 = inl(tcobase + 0x04);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
+ if (reg32 & (1 << 18))
+ outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+ return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+ if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+ if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+ if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
+ if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
+ if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
+ if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
+ if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
+ printk(BIOS_DEBUG, "\n");
+}
+
+int southbridge_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x32:
+ printk(BIOS_DEBUG, "OS Init\n");
+ /* gnvs->smif:
+ * On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ */
+ gnvs->smif = 0;
+ return 1; /* IO trap handled */
+ }
+
+ /* Not handled */
+ return 0;
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+void southbridge_smi_set_eos(void)
+{
+ u8 reg8;
+
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 |= EOS;
+ outb(reg8, pmbase + SMI_EN);
+}
+
+static void busmaster_disable_on_bus(int bus)
+{
+ int slot, func;
+ unsigned int val;
+ unsigned char hdr;
+
+ for (slot = 0; slot < 0x20; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 reg32;
+ device_t dev = PCI_DEV(bus, slot, func);
+
+ val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+ if (val == 0xffffffff || val == 0x00000000 ||
+ val == 0x0000ffff || val == 0xffff0000)
+ continue;
+
+ /* Disable Bus Mastering for this one device */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* If this is a bridge, then follow it. */
+ hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+ hdr &= 0x7f;
+ if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+ hdr == PCI_HEADER_TYPE_CARDBUS) {
+ unsigned int buses;
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+ busmaster_disable_on_bus((buses >> 8) & 0xff);
+ }
+ }
+ }
+}
+
+/*
+ * Drive GPIO 60 low to gate memory reset in S3.
+ *
+ * Intel reference designs all use GPIO 60 but it is
+ * not a requirement and boards could use a different pin.
+ */
+static void southbridge_gate_memory_reset(void)
+{
+ u32 reg32;
+ u16 gpiobase;
+
+ gpiobase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), GPIOBASE) & 0xfffc;
+ if (!gpiobase)
+ return;
+
+ /* Make sure it is set as GPIO */
+ reg32 = inl(gpiobase + GPIO_USE_SEL2);
+ if (!(reg32 & (1 << 28))) {
+ reg32 |= (1 << 28);
+ outl(reg32, gpiobase + GPIO_USE_SEL2);
+ }
+
+ /* Make sure it is set as output */
+ reg32 = inl(gpiobase + GP_IO_SEL2);
+ if (reg32 & (1 << 28)) {
+ reg32 &= ~(1 << 28);
+ outl(reg32, gpiobase + GP_IO_SEL2);
+ }
+
+ /* Drive the output low */
+ reg32 = inl(gpiobase + GP_LVL2);
+ reg32 &= ~(1 << 28);
+ outl(reg32, gpiobase + GP_LVL2);
+}
+
+static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u8 reg8;
+ u32 reg32;
+ u8 slp_typ;
+ u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+
+ // save and recover RTC port values
+ u8 tmp70, tmp72;
+ tmp70 = inb(0x70);
+ tmp72 = inb(0x72);
+ get_option(&s5pwr, "power_on_after_fail");
+ outb(tmp70, 0x70);
+ outb(tmp72, 0x72);
+
+ void (*mainboard_sleep)(u8 slp_typ) = mainboard_smi_sleep;
+
+ /* First, disable further SMIs */
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 &= ~SLP_SMI_EN;
+ outb(reg8, pmbase + SMI_EN);
+
+ /* Figure out SLP_TYP */
+ reg32 = inl(pmbase + PM1_CNT);
+ printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
+ slp_typ = (reg32 >> 10) & 7;
+
+ /* Do any mainboard sleep handling */
+ tseg_relocate((void **)&mainboard_sleep);
+ if (mainboard_sleep)
+ mainboard_sleep(slp_typ-2);
+
+#if CONFIG_ELOG_GSMI
+ /* Log S3, S4, and S5 entry */
+ if (slp_typ >= 5)
+ elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2);
+#endif
+
+ /* Next, do the deed.
+ */
+
+ switch (slp_typ) {
+ case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
+ case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
+ case 5:
+ printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
+
+ /* Gate memory reset */
+ southbridge_gate_memory_reset();
+
+ /* Invalidate the cache before going to S3 */
+ wbinvd();
+ break;
+ case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
+ case 7:
+ printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
+
+ outl(0, pmbase + GPE0_EN);
+
+ /* Always set the flag in case CMOS was changed on runtime. For
+ * "KEEP", switch to "OFF" - KEEP is software emulated
+ */
+ reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
+ if (s5pwr == MAINBOARD_POWER_ON) {
+ reg8 &= ~1;
+ } else {
+ reg8 |= 1;
+ }
+ pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
+
+ /* also iterates over all bridges on bus 0 */
+ busmaster_disable_on_bus(0);
+ break;
+ default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
+ }
+
+ /* Write back to the SLP register to cause the originally intended
+ * event again. We need to set BIT13 (SLP_EN) though to make the
+ * sleep happen.
+ */
+ outl(reg32 | SLP_EN, pmbase + PM1_CNT);
+
+ /* Make sure to stop executing code here for S3/S4/S5 */
+ if (slp_typ > 1)
+ hlt();
+
+ /* In most sleep states, the code flow of this function ends at
+ * the line above. However, if we entered sleep state S1 and wake
+ * up again, we will continue to execute code in this function.
+ */
+ reg32 = inl(pmbase + PM1_CNT);
+ if (reg32 & SCI_EN) {
+ /* The OS is not an ACPI OS, so we set the state to S0 */
+ reg32 &= ~(SLP_EN | SLP_TYP);
+ outl(reg32, pmbase + PM1_CNT);
+ }
+}
+
+/*
+ * Look for Synchronous IO SMI and use save state from that
+ * core in case we are not running on the same core that
+ * initiated the IO transaction.
+ */
+/* FIXME: Confirm Haswell's SMM save state area structure. */
+static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd)
+{
+ em64t101_smm_state_save_area_t *state;
+ u32 base = smi_get_tseg_base() + 0x8000 + 0x7d00;
+ int node;
+
+ /* Check all nodes looking for the one that issued the IO */
+ for (node = 0; node < CONFIG_MAX_CPUS; node++) {
+ state = (em64t101_smm_state_save_area_t *)
+ (base - (node * 0x400));
+
+ /* Check for Synchronous IO (bit0==1) */
+ if (!(state->io_misc_info & (1 << 0)))
+ continue;
+
+ /* Make sure it was a write (bit4==0) */
+ if (state->io_misc_info & (1 << 4))
+ continue;
+
+ /* Check for APMC IO port */
+ if (((state->io_misc_info >> 16) & 0xff) != APM_CNT)
+ continue;
+
+ /* Check AX against the requested command */
+ if ((state->rax & 0xff) != cmd)
+ continue;
+
+ return state;
+ }
+
+ return NULL;
+}
+
+#if CONFIG_ELOG_GSMI
+static void southbridge_smi_gsmi(void)
+{
+ u32 *ret, *param;
+ u8 sub_command;
+ em64t101_smm_state_save_area_t *io_smi =
+ smi_apmc_find_state_save(ELOG_GSMI_APM_CNT);
+
+ if (!io_smi)
+ return;
+
+ /* Command and return value in EAX */
+ ret = (u32*)&io_smi->rax;
+ sub_command = (u8)(*ret >> 8);
+
+ /* Parameter buffer in EBX */
+ param = (u32*)&io_smi->rbx;
+
+ /* drivers/elog/gsmi.c */
+ *ret = gsmi_exec(sub_command, param);
+}
+#endif
+
+static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 pmctrl;
+ u8 reg8;
+ int (*mainboard_apmc)(u8 apmc) = mainboard_smi_apmc;
+ em64t101_smm_state_save_area_t *state;
+
+ /* Emulate B2 register as the FADT / Linux expects it */
+
+ reg8 = inb(APM_CNT);
+ switch (reg8) {
+ case APM_CNT_CST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "C-state control\n");
+ break;
+ case APM_CNT_PST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "P-state control\n");
+ break;
+ case APM_CNT_ACPI_DISABLE:
+ pmctrl = inl(pmbase + PM1_CNT);
+ pmctrl &= ~SCI_EN;
+ outl(pmctrl, pmbase + PM1_CNT);
+ printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
+ break;
+ case APM_CNT_ACPI_ENABLE:
+ pmctrl = inl(pmbase + PM1_CNT);
+ pmctrl |= SCI_EN;
+ outl(pmctrl, pmbase + PM1_CNT);
+ printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
+ break;
+ case APM_CNT_GNVS_UPDATE:
+ if (smm_initialized) {
+ printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
+ return;
+ }
+ state = smi_apmc_find_state_save(reg8);
+ if (state) {
+ /* EBX in the state save contains the GNVS pointer */
+ gnvs = (global_nvs_t *)((u32)state->rbx);
+ smm_initialized = 1;
+ printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
+ }
+ break;
+#if CONFIG_ELOG_GSMI
+ case ELOG_GSMI_APM_CNT:
+ southbridge_smi_gsmi();
+ break;
+#endif
+ }
+
+ tseg_relocate((void **)&mainboard_apmc);
+ if (mainboard_apmc)
+ mainboard_apmc(reg8);
+}
+
+static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u16 pm1_sts;
+
+ pm1_sts = reset_pm1_status();
+ dump_pm1_status(pm1_sts);
+
+ /* While OSPM is not active, poweroff immediately
+ * on a power button event.
+ */
+ if (pm1_sts & PWRBTN_STS) {
+ // power button pressed
+ u32 reg32;
+ reg32 = (7 << 10) | (1 << 13);
+#if CONFIG_ELOG_GSMI
+ elog_add_event(ELOG_TYPE_POWER_BUTTON);
+#endif
+ outl(reg32, pmbase + PM1_CNT);
+ }
+}
+
+static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 gpe0_sts;
+
+ gpe0_sts = reset_gpe0_status();
+ dump_gpe0_status(gpe0_sts);
+}
+
+static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save)
+{
+ void (*mainboard_gpi)(u16 gpi_sts) = mainboard_smi_gpi;
+ u16 reg16;
+ reg16 = inw(pmbase + ALT_GP_SMI_STS);
+ outw(reg16, pmbase + ALT_GP_SMI_STS);
+
+ reg16 &= inw(pmbase + ALT_GP_SMI_EN);
+
+ tseg_relocate((void **)&mainboard_gpi);
+ if (mainboard_gpi) {
+ mainboard_gpi(reg16);
+ } else {
+ if (reg16)
+ printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
+ }
+
+ outw(reg16, pmbase + ALT_GP_SMI_STS);
+}
+
+static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_EN);
+
+ /* Are periodic SMIs enabled? */
+ if ((reg32 & MCSMI_EN) == 0)
+ return;
+
+ printk(BIOS_DEBUG, "Microcontroller SMI.\n");
+}
+
+
+
+static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 tco_sts;
+
+ tco_sts = reset_tco_status();
+
+ /* Any TCO event? */
+ if (!tco_sts)
+ return;
+
+ if (tco_sts & (1 << 8)) { // BIOSWR
+ u8 bios_cntl;
+
+ bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
+
+ if (bios_cntl & 1) {
+ /* BWE is RW, so the SMI was caused by a
+ * write to BWE, not by a write to the BIOS
+ */
+
+ /* This is the place where we notice someone
+ * is trying to tinker with the BIOS. We are
+ * trying to be nice and just ignore it. A more
+ * resolute answer would be to power down the
+ * box.
+ */
+ printk(BIOS_DEBUG, "Switching back to RO\n");
+ pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+ } /* No else for now? */
+ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */
+ /* Handle TCO timeout */
+ printk(BIOS_DEBUG, "TCO Timeout.\n");
+ } else if (!tco_sts) {
+ dump_tco_status(tco_sts);
+ }
+}
+
+static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_EN);
+
+ /* Are periodic SMIs enabled? */
+ if ((reg32 & PERIODIC_EN) == 0)
+ return;
+
+ printk(BIOS_DEBUG, "Periodic SMI.\n");
+}
+
+static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
+{
+#define IOTRAP(x) (trap_sts & (1 << x))
+ u32 trap_sts, trap_cycle;
+ u32 data, mask = 0;
+ int i;
+
+ trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register
+ RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR
+
+ trap_cycle = RCBA32(0x1e10);
+ for (i=16; i<20; i++) {
+ if (trap_cycle & (1 << i))
+ mask |= (0xff << ((i - 16) << 2));
+ }
+
+
+ /* IOTRAP(3) SMI function call */
+ if (IOTRAP(3)) {
+ if (gnvs && gnvs->smif)
+ io_trap_handler(gnvs->smif); // call function smif
+ return;
+ }
+
+ /* IOTRAP(2) currently unused
+ * IOTRAP(1) currently unused */
+
+ /* IOTRAP(0) SMIC */
+ if (IOTRAP(0)) {
+ if (!(trap_cycle & (1 << 24))) { // It's a write
+ printk(BIOS_DEBUG, "SMI1 command\n");
+ data = RCBA32(0x1e18);
+ data &= mask;
+ // if (smi1)
+ // southbridge_smi_command(data);
+ // return;
+ }
+ // Fall through to debug
+ }
+
+ printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc);
+ for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i);
+ printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
+ printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
+ printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
+
+ if (!(trap_cycle & (1 << 24))) {
+ /* Write Cycle */
+ data = RCBA32(0x1e18);
+ printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data);
+ }
+#undef IOTRAP
+}
+
+typedef void (*smi_handler_t)(unsigned int node,
+ smm_state_save_area_t *state_save);
+
+static smi_handler_t southbridge_smi[32] = {
+ NULL, // [0] reserved
+ NULL, // [1] reserved
+ NULL, // [2] BIOS_STS
+ NULL, // [3] LEGACY_USB_STS
+ southbridge_smi_sleep, // [4] SLP_SMI_STS
+ southbridge_smi_apmc, // [5] APM_STS
+ NULL, // [6] SWSMI_TMR_STS
+ NULL, // [7] reserved
+ southbridge_smi_pm1, // [8] PM1_STS
+ southbridge_smi_gpe0, // [9] GPE0_STS
+ southbridge_smi_gpi, // [10] GPI_STS
+ southbridge_smi_mc, // [11] MCSMI_STS
+ NULL, // [12] DEVMON_STS
+ southbridge_smi_tco, // [13] TCO_STS
+ southbridge_smi_periodic, // [14] PERIODIC_STS
+ NULL, // [15] SERIRQ_SMI_STS
+ NULL, // [16] SMBUS_SMI_STS
+ NULL, // [17] LEGACY_USB2_STS
+ NULL, // [18] INTEL_USB2_STS
+ NULL, // [19] reserved
+ NULL, // [20] PCI_EXP_SMI_STS
+ southbridge_smi_monitor, // [21] MONITOR_STS
+ NULL, // [22] reserved
+ NULL, // [23] reserved
+ NULL, // [24] reserved
+ NULL, // [25] EL_SMI_STS
+ NULL, // [26] SPI_STS
+ NULL, // [27] reserved
+ NULL, // [28] reserved
+ NULL, // [29] reserved
+ NULL, // [30] reserved
+ NULL // [31] reserved
+};
+
+/**
+ * @brief Interrupt handler for SMI#
+ *
+ * @param smm_revision revision of the smm state save map
+ */
+
+void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+{
+ int i, dump = 0;
+ u32 smi_sts;
+
+ /* Update global variable pmbase */
+ pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
+
+ /* We need to clear the SMI status registers, or we won't see what's
+ * happening in the following calls.
+ */
+ smi_sts = reset_smi_status();
+
+ /* Call SMI sub handler for each of the status bits */
+ for (i = 0; i < 31; i++) {
+ if (smi_sts & (1 << i)) {
+ if (southbridge_smi[i]) {
+#if CONFIG_SMM_TSEG
+ smi_handler_t handler = (smi_handler_t)
+ ((u8*)southbridge_smi[i] +
+ smi_get_tseg_base());
+ if (handler)
+ handler(node, state_save);
+#else
+ southbridge_smi[i](node, state_save);
+#endif
+ } else {
+ printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+ "handler available.\n", i);
+ dump = 1;
+ }
+ }
+ }
+
+ if(dump) {
+ dump_smi_status(smi_sts);
+ }
+
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 21:23:29 +0000