diff options
Diffstat (limited to 'src/southbridge/intel/sch/smi.c')
| -rw-r--r-- | src/southbridge/intel/sch/smi.c | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/src/southbridge/intel/sch/smi.c b/src/southbridge/intel/sch/smi.c new file mode 100644 index 0000000000..07a7df47a5 --- /dev/null +++ b/src/southbridge/intel/sch/smi.c @@ -0,0 +1,348 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/io.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/smm.h> +#include <cpu/cpu.h> +#include <string.h> +#include "chip.h" +#include "sch.h" + +extern unsigned char _binary_smm_start; +extern unsigned char _binary_smm_size; + +/* I945 */ +#define SMRAM 0x9d +#define D_OPEN (1 << 6) +#define D_CLS (1 << 5) +#define D_LCK (1 << 4) +#define G_SMRAME (1 << 3) +#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) + +/* ICH7 */ +#define PM1_STS 0x00 +#define PM1_EN 0x02 +#define PM1_CNT 0x04 +#define PM1_TMR 0x08 +#define PROC_CNT 0x10 +#define LV2 0x14 +#define LV3 0x15 +#define LV4 0x16 +#define PM2_CNT 0x20 // mobile only +#define GPE0_STS 0x28 +#define GPE0_EN 0x2c +#define SMI_EN 0x30 +#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology +#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic +#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic +#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS +#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) +#define MCSMI_EN (1 << 11) // Trap microcontroller range access +#define BIOS_RLS (1 << 7) // asserts SCI on bit set +#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set +#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# +#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# +#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic +#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit +#define EOS (1 << 1) // End of SMI (deassert SMI#) +#define GBL_SMI_EN (1 << 0) // SMI# generation at all? +#define SMI_STS 0x34 +#define ALT_GP_SMI_EN 0x38 +#define ALT_GP_SMI_STS 0x3a +#define GPE_CNTL 0x42 +#define DEVACT_STS 0x44 +#define SS_CNT 0x50 +#define C3_RES 0x54 + +/* While we read PMBASE dynamically in case it changed, let's + * initialize it with a sane value + */ + +static u16 pmbase = DEFAULT_PMBASE; +/** + * @brief read and clear PM1_STS + * @return PM1_STS register + */ +static u16 reset_pm1_status(void) +{ + u16 reg16; + + reg16 = inw(pmbase + PM1_STS); + /* set status bits are cleared by writing 1 to them */ + outw(reg16, pmbase + PM1_STS); + + return reg16; +} + +static void dump_pm1_status(u16 pm1_sts) +{ + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); +} + +/** + * @brief read and clear SMI_STS + * @return SMI_STS register + */ +static u32 reset_smi_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + SMI_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + SMI_STS); + + return reg32; +} + +static void dump_smi_status(u32 smi_sts) +{ + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); +} + + +/** + * @brief read and clear GPE0_STS + * @return GPE0_STS register + */ +static u32 reset_gpe0_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + GPE0_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + GPE0_STS); + + return reg32; +} + +static void dump_gpe0_status(u32 gpe0_sts) +{ + int i; + printk(BIOS_DEBUG, "GPE0_STS: "); + for (i=31; i<= 16; i--) { + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); + } + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); +} + +/** + * @brief read and clear TCOx_STS + * @return TCOx_STS registers + */ +static u32 reset_tco_status(void) +{ + u32 tcobase = pmbase + 0x60; + u32 reg32; + + reg32 = inl(tcobase + 0x04); + /* set status bits are cleared by writing 1 to them */ + outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS + if (reg32 & (1 << 18)) + outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS + + return reg32; +} + + +static void dump_tco_status(u32 tco_sts) +{ + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); +} + + + +/** + * @brief Set the EOS bit + */ +static void smi_set_eos(void) +{ +// FIXME: disabled until SMM actually works +#if 0 + u8 reg8; + + reg8 = inb(pmbase + SMI_EN); + reg8 |= EOS; + outb(reg8, pmbase + SMI_EN); +#endif +} + +extern uint8_t smm_relocation_start, smm_relocation_end; + +static void smm_relocate(void) +{ + u32 smi_en; + + printk(BIOS_DEBUG, "Initializing SMM handler..."); + + pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + + smi_en = inl(pmbase + SMI_EN); + if (smi_en & APMC_EN) { + printk(BIOS_INFO, "SMI# handler already enabled?\n"); + return; + } + + /* copy the SMM relocation code */ + memcpy((void *)0x38000, &smm_relocation_start, + &smm_relocation_end - &smm_relocation_start); + + printk(BIOS_DEBUG, "\n"); + dump_smi_status(reset_smi_status()); + dump_pm1_status(reset_pm1_status()); + dump_gpe0_status(reset_gpe0_status()); + dump_tco_status(reset_tco_status()); + + /* Enable SMI generation: + * - on TCO events + * - on APMC writes (io 0xb2) + * - on writes to SLP_EN (sleep states) + * - on writes to GBL_RLS (bios commands) + * No SMIs: + * - on microcontroller writes (io 0x62/0x66) + */ + outl(smi_en | (TCO_EN | APMC_EN | SLP_SMI_EN | BIOS_EN | + EOS | GBL_SMI_EN), pmbase + SMI_EN); + + /** + * There are several methods of raising a controlled SMI# via + * software, among them: + * - Writes to io 0xb2 (APMC) + * - Writes to the Local Apic ICR with Delivery mode SMI. + * + * Using the local apic is a bit more tricky. According to + * AMD Family 11 Processor BKDG no destination shorthand must be + * used. + * The whole SMM initialization is quite a bit hardware specific, so + * I'm not too worried about the better of the methods at the moment + */ + + /* raise an SMI interrupt */ + printk(BIOS_SPEW, " ... raise SMI#\n"); + outb(0x00, 0xb2); +} + +static void smm_install(void) +{ + /* enable the SMM memory window */ + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, + D_OPEN | G_SMRAME | C_BASE_SEG); + + /* copy the real SMM handler */ + memcpy((void *)0xa0000, &_binary_smm_start, (size_t)&_binary_smm_size); + wbinvd(); + + /* close the SMM memory window and enable normal SMM */ + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, + G_SMRAME | C_BASE_SEG); +} + +void smm_init(void) +{ + smm_relocate(); + smm_install(); + smi_set_eos(); +} + +void smm_lock(void) +{ + /* LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, + D_LCK | G_SMRAME | C_BASE_SEG); +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1) +{ + /* The GDT or coreboot table is going to live here. But a long time + * after we relocated the GNVS, so this is not troublesome. + */ + *(u32 *)0x500 = (u32)gnvs; + *(u32 *)0x504 = (u32)tcg; + *(u32 *)0x508 = (u32)smi1; + outb(0xea, 0xb2); +} |