diff options
Diffstat (limited to 'src/southbridge/intel')
38 files changed, 5707 insertions, 0 deletions
diff --git a/src/southbridge/intel/Kconfig b/src/southbridge/intel/Kconfig index 6b46f8a1f4..45e3a4ee5e 100644 --- a/src/southbridge/intel/Kconfig +++ b/src/southbridge/intel/Kconfig @@ -16,3 +16,4 @@ source src/southbridge/intel/bd82x6x/Kconfig source src/southbridge/intel/ibexpeak/Kconfig source src/southbridge/intel/lynxpoint/Kconfig source src/southbridge/intel/fsp_bd82x6x/Kconfig +source src/southbridge/intel/fsp_rangeley/Kconfig diff --git a/src/southbridge/intel/Makefile.inc b/src/southbridge/intel/Makefile.inc index d9733f58cd..ef1ee9e9b9 100644 --- a/src/southbridge/intel/Makefile.inc +++ b/src/southbridge/intel/Makefile.inc @@ -17,3 +17,4 @@ subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_C216) += bd82x6x subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_IBEXPEAK) += ibexpeak subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT) += lynxpoint subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X) += fsp_bd82x6x +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY) += fsp_rangeley diff --git a/src/southbridge/intel/fsp_rangeley/Kconfig b/src/southbridge/intel/fsp_rangeley/Kconfig new file mode 100644 index 0000000000..d912284978 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/Kconfig @@ -0,0 +1,72 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Google Inc. +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_INTEL_FSP_RANGELEY + bool + +if SOUTHBRIDGE_INTEL_FSP_RANGELEY + +config SOUTH_BRIDGE_OPTIONS # dummy + def_bool y + select IOAPIC + select HAVE_HARD_RESET + select HAVE_USBDEBUG + select USE_WATCHDOG_ON_BOOT + select PCIEXP_ASPM + select PCIEXP_COMMON_CLOCK + select SPI_FLASH + +config EHCI_BAR + hex + default 0xfef00000 + +config EHCI_DEBUG_OFFSET + hex + default 0xa0 + +config SERIRQ_CONTINUOUS_MODE + bool + default n + help + If you set this option to y, the serial IRQ machine will be + operated in continuous mode. + +config HPET_MIN_TICKS + hex + default 0x80 + +if HAVE_FSP_BIN + +config INCLUDE_ME + bool "Add Intel descriptor.bin file" + default n + help + Include the descriptor.bin for rangeley. + +config ME_PATH + string "Path to descriptor.bin file" + depends on INCLUDE_ME + default "../intel/mainboard/intel/rangeley" + help + The path of the descriptor.bin file. + +endif # HAVE_FSP_BIN + +endif diff --git a/src/southbridge/intel/fsp_rangeley/Makefile.inc b/src/southbridge/intel/fsp_rangeley/Makefile.inc new file mode 100644 index 0000000000..830975a553 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/Makefile.inc @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Google Inc. +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# Run an intermediate step when producing coreboot.rom +# that adds additional components to the final firmware +# image outside of CBFS + +ramstage-y += soc.c +ramstage-y += lpc.c +ramstage-y += sata.c +ramstage-y += reset.c +ramstage-y += watchdog.c +ramstage-y += spi.c +ramstage-y += smbus.c +ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c + +romstage-y += early_usb.c early_smbus.c gpio.c reset.c early_spi.c early_init.c +romstage-y += romstage.c + +romstage-$(CONFIG_USBDEBUG) += usb_debug.c +ramstage-$(CONFIG_USBDEBUG) += usb_debug.c + +$(obj)/southbridge/intel/fsp_rangeley/early_init.romstage.o : $(obj)/build.h + +ifeq ($(CONFIG_INCLUDE_ME),y) +INTERMEDIATE+=rangeley_add_descriptor + +rangeley_add_descriptor: $(obj)/coreboot.pre $(IFDTOOL) + printf " DD Adding Intel Firmware Descriptor\n" + dd if=$(call strip_quotes,$(CONFIG_ME_PATH))/descriptor.bin \ + of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 +endif + +PHONY += rangeley_add_descriptor diff --git a/src/southbridge/intel/fsp_rangeley/acpi.c b/src/southbridge/intel/fsp_rangeley/acpi.c new file mode 100644 index 0000000000..19d6154320 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <southbridge/intel/fsp_rangeley/soc.h> +#include <arch/io.h> + +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) +#include <cpu/x86/smm.h> +#endif + +/** + * Fill in the fadt with generic values that can be overridden later. + */ + +typedef struct southbridge_intel_fsp_rangeley_config config_t; + +void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + struct device *lpcdev = dev_find_slot(SOC_LPC_DEVFN); + u16 pmbase = pci_read_config16(lpcdev, ABASE) & 0xfff0; + config_t *config = lpcdev->chip_info; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + + /* + * Reference section 5.2.9 Fixed ACPI Description Table (FADT) + * in the ACPI 3.0b specification. + */ + + /* FADT Header Structure */ + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = ACPI_FADT_REV_ACPI_3_0; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + /* ACPI Pointers */ + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + + fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ + fadt->preferred_pm_profile = config->fadt_pm_profile; /* unknown is default */ + + /* System Management */ + fadt->sci_int = 0x09; + fadt->smi_cmd = 0x00; /* disable SMM */ + fadt->acpi_enable = 0x00; /* unused if SMI_CMD = 0 */ + fadt->acpi_disable = 0x00; /* unused if SMI_CMD = 0 */ + + /* Enable ACPI */ + outl(inl(pmbase + PM1_CNT) | SCI_EN, pmbase + PM1_CNT); + + /* Power Control */ + fadt->s4bios_req = 0x00; + fadt->pstate_cnt = 0x00; + + /* Control Registers - Base Address */ + fadt->pm1a_evt_blk = pmbase + PM1_STS; + fadt->pm1b_evt_blk = 0x00; /* Not Used */ + fadt->pm1a_cnt_blk = pmbase + PM1_CNT; + fadt->pm1b_cnt_blk = 0x00; /* Not Used */ + fadt->pm2_cnt_blk = pmbase + PM2A_CNT_BLK; + fadt->pm_tmr_blk = pmbase + PM1_TMR; + fadt->gpe0_blk = pmbase + GPE0_STS; + fadt->gpe1_blk = 0x00; /* Not Used */ + + /* Control Registers - Length */ + fadt->pm1_evt_len = 4; /* 32 bits */ + fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */ + fadt->pm2_cnt_len = 1; /* 8 bits */ + fadt->pm_tmr_len = 4; /* 32 bits */ + fadt->gpe0_blk_len = 8; /* 64 bits */ + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED; + fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED; + fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->duty_offset = 1; + fadt->duty_width = 0; + + /* RTC Registers */ + fadt->day_alrm = 0x0D; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = config->fadt_boot_arch; /* legacy free default */ + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SLEEP_TYPE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + /* Reset Register */ + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->reset_reg.addrl = 0xCF9; + fadt->reset_reg.addrh = 0x00; + fadt->reset_value = 6; + + /* Reserved Bits */ + fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + + /* Extended ACPI Pointers */ + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0x00; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0x00; + + /* PM1 Status & PM1 Enable */ + fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk; + fadt->x_pm1a_evt_blk.addrh = 0x00; + + fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.access_size = 0; + fadt->x_pm1b_evt_blk.addrl = fadt->pm1b_evt_blk; + fadt->x_pm1b_evt_blk.addrh = 0x00; + + /* PM1 Control Registers */ + fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; + fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk; + fadt->x_pm1a_cnt_blk.addrh = 0x00; + + fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.access_size = 0; + fadt->x_pm1b_cnt_blk.addrl = fadt->pm1b_cnt_blk; + fadt->x_pm1b_cnt_blk.addrh = 0x00; + + /* PM2 Control Registers */ + fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk; + fadt->x_pm2_cnt_blk.addrh = 0x00; + + /* PM1 Timer Register */ + fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk; + fadt->x_pm_tmr_blk.addrh = 0x00; + + /* General-Purpose Event Registers */ + fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + EventEnable */ + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_gpe0_blk.addrl = fadt->gpe0_blk; + fadt->x_gpe0_blk.addrh = 0x00; + + fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.access_size = 0; + fadt->x_gpe1_blk.addrl = fadt->gpe1_blk; + fadt->x_gpe1_blk.addrh = 0x00; + + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl b/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl new file mode 100644 index 0000000000..21209db6ba --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl @@ -0,0 +1,185 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Global Variables */ + +Name(\PICM, 0) // IOAPIC/8259 +Name(\DSEN, 1) // Display Output Switching Enable + +/* Global ACPI memory region. This region is used for passing information + * between coreboot (aka "the system bios"), ACPI, and the SMI handler. + * Since we don't know where this will end up in memory at ACPI compile time, + * we have to fix it up in coreboot's ACPI creation phase. + */ + + +OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0xf00) +Field (GNVS, ByteAcc, NoLock, Preserve) +{ + /* Miscellaneous */ + Offset (0x00), + OSYS, 16, // 0x00 - Operating System + SMIF, 8, // 0x02 - SMI function + PRM0, 8, // 0x03 - SMI function parameter + PRM1, 8, // 0x04 - SMI function parameter + SCIF, 8, // 0x05 - SCI function + PRM2, 8, // 0x06 - SCI function parameter + PRM3, 8, // 0x07 - SCI function parameter + LCKF, 8, // 0x08 - Global Lock function for EC + PRM4, 8, // 0x09 - Lock function parameter + PRM5, 8, // 0x0a - Lock function parameter + P80D, 32, // 0x0b - Debug port (IO 0x80) value + LIDS, 8, // 0x0f - LID state (open = 1) + PWRS, 8, // 0x10 - Power State (AC = 1) + /* Processor Identification */ + Offset (0x28), + APIC, 8, // 0x28 - APIC Enabled by coreboot + MPEN, 8, // 0x29 - Multi Processor Enable + PCP0, 8, // 0x2a - PDC CPU/CORE 0 + PCP1, 8, // 0x2b - PDC CPU/CORE 1 + PPCM, 8, // 0x2c - Max. PPC state + PCNT, 8, // 0x2d - Processor count + /* Super I/O & CMOS config */ + Offset (0x32), + NATP, 8, // 0x32 - + S5U0, 8, // 0x33 - Enable USB0 in S5 + S5U1, 8, // 0x34 - Enable USB1 in S5 + S3U0, 8, // 0x35 - Enable USB0 in S3 + S3U1, 8, // 0x36 - Enable USB1 in S3 + S33G, 8, // 0x37 - Enable 3G in S3 + CMEM, 32, // 0x38 - CBMEM TOC + /* Integrated Graphics Device */ + Offset (0x3c), + IGDS, 8, // 0x3c - IGD state (primary = 1) + TLST, 8, // 0x3d - Display Toggle List pointer + CADL, 8, // 0x3e - Currently Attached Devices List + PADL, 8, // 0x3f - Previously Attached Devices List + CSTE, 16, // 0x40 - Current display state + NSTE, 16, // 0x42 - Next display state + SSTE, 16, // 0x44 - Set display state + Offset (0x46), + NDID, 8, // 0x46 - Number of Device IDs + DID1, 32, // 0x47 - Device ID 1 + DID2, 32, // 0x4b - Device ID 2 + DID3, 32, // 0x4f - Device ID 3 + DID4, 32, // 0x53 - Device ID 4 + DID5, 32, // 0x57 - Device ID 5 + /* Backlight Control */ + Offset (0x64), + BLCS, 8, // 0x64 - Backlight control possible? + BRTL, 8, // 0x65 - Brightness Level + ODDS, 8, // 0x66 + /* Ambient Light Sensors */ + Offset (0x6e), + ALSE, 8, // 0x6e - ALS enable + ALAF, 8, // 0x6f - Ambient light adjustment factor + LLOW, 8, // 0x70 - LUX Low + LHIH, 8, // 0x71 - LUX High + /* EMA */ + Offset (0x78), + EMAE, 8, // 0x78 - EMA enable + EMAP, 16, // 0x79 - EMA pointer + EMAL, 16, // 0x7b - EMA length + /* MEF */ + Offset (0x82), + MEFE, 8, // 0x82 - MEF enable + /* TPM support */ + Offset (0x8c), + TPMP, 8, // 0x8c - TPM + TPME, 8, // 0x8d - TPM enable + /* SATA */ + Offset (0x96), + GTF0, 56, // 0x96 - GTF task file buffer for port 0 + GTF1, 56, // 0x9d - GTF task file buffer for port 1 + GTF2, 56, // 0xa4 - GTF task file buffer for port 2 + IDEM, 8, // 0xab - IDE mode (compatible / enhanced) + IDET, 8, // 0xac - IDE + /* IGD OpRegion */ + Offset (0xb4), + ASLB, 32, // 0xb4 - IGD OpRegion Base Address + IBTT, 8, // 0xb8 - IGD boot panel device + IPAT, 8, // 0xb9 - IGD panel type cmos option + ITVF, 8, // 0xba - IGD TV format cmos option + ITVM, 8, // 0xbb - IGD TV minor format option + IPSC, 8, // 0xbc - IGD panel scaling + IBLC, 8, // 0xbd - IGD BLC config + IBIA, 8, // 0xbe - IGD BIA config + ISSC, 8, // 0xbf - IGD SSC config + I409, 8, // 0xc0 - IGD 0409 modified settings + I509, 8, // 0xc1 - IGD 0509 modified settings + I609, 8, // 0xc2 - IGD 0609 modified settings + I709, 8, // 0xc3 - IGD 0709 modified settings + IDMM, 8, // 0xc4 - IGD Power conservation feature + IDMS, 8, // 0xc5 - IGD DVMT memory size + IF1E, 8, // 0xc6 - IGD function 1 enable + HVCO, 8, // 0xc7 - IGD HPLL VCO + NXD1, 32, // 0xc8 - IGD _DGS next DID1 + NXD2, 32, // 0xcc - IGD _DGS next DID2 + NXD3, 32, // 0xd0 - IGD _DGS next DID3 + NXD4, 32, // 0xd4 - IGD _DGS next DID4 + NXD5, 32, // 0xd8 - IGD _DGS next DID5 + NXD6, 32, // 0xdc - IGD _DGS next DID6 + NXD7, 32, // 0xe0 - IGD _DGS next DID7 + NXD8, 32, // 0xe4 - IGD _DGS next DID8 + + ISCI, 8, // 0xe8 - IGD SMI/SCI mode (0: SCI) + PAVP, 8, // 0xe9 - IGD PAVP data + Offset (0xeb), + OSCC, 8, // 0xeb - PCIe OSC control + NPCE, 8, // 0xec - native pcie support + PLFL, 8, // 0xed - platform flavor + BREV, 8, // 0xee - board revision + DPBM, 8, // 0xef - digital port b mode + DPCM, 8, // 0xf0 - digital port c mode + DPDM, 8, // 0xf1 - digital port d mode + ALFP, 8, // 0xf2 - active lfp + IMON, 8, // 0xf3 - current graphics turbo imon value + MMIO, 8, // 0xf4 - 64bit mmio support +} + +/* Set flag to enable USB charging in S3 */ +Method (S3UE) +{ + Store (One, \S3U0) + Store (One, \S3U1) +} + +/* Set flag to disable USB charging in S3 */ +Method (S3UD) +{ + Store (Zero, \S3U0) + Store (Zero, \S3U1) +} + +/* Set flag to enable USB charging in S5 */ +Method (S5UE) +{ + Store (One, \S5U0) + Store (One, \S5U1) +} + +/* Set flag to disable USB charging in S5 */ +Method (S5UD) +{ + Store (Zero, \S5U0) + Store (Zero, \S5U1) +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h b/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h new file mode 100644 index 0000000000..4a298d3bfe --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronics Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * This file will use irqroute.asl and mainboard/irqroute.h + * to generate the ACPI IRQ routing for the mainboard being compiled. + * This method uses #defines in irqroute.h along with the macros contained + * in this file to generate an IRQ routing for each PCI device in the system. + */ +#undef PCI_DEV_PIRQ_ROUTES +#undef ACPI_DEV_IRQ +#undef PCI_DEV_PIRQ_ROUTE +#undef PIRQ_PIC_ROUTES +#undef PIRQ_PIC + +#if defined(PIC_MODE) + +#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \ + Package() { ## dev_ ## ffff, pin_, \_SB.PCI0.LPCB.LNK ## pin_name_, 0 } + +#else /* defined(PIC_MODE) */ + +#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \ + Package() { ## dev_ ## ffff, pin_, 0, PIRQ ## pin_name_ ## _APIC_IRQ } + +#endif + +#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \ + ACPI_DEV_IRQ(dev_, 0, a_), \ + ACPI_DEV_IRQ(dev_, 1, b_), \ + ACPI_DEV_IRQ(dev_, 2, c_), \ + ACPI_DEV_IRQ(dev_, 3, d_) + +/* Empty PIRQ_PIC definition. */ +#define PIRQ_PIC(pirq_, pic_irq_) + +/* Include the mainboard irq route definition */ +#include "irqroute.h" diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl new file mode 100644 index 0000000000..b2f1679813 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl @@ -0,0 +1,492 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (LNKA) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 1) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTA) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLA, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLA, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTA + ShiftLeft(1, And(PRTA, 0x0f), IRQ0) + + Return (RTLA) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTA) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTA, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKB) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 2) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTB) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLB, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLB, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTB + ShiftLeft(1, And(PRTB, 0x0f), IRQ0) + + Return (RTLB) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTB) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTB, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKC) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 3) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTC) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLC, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLC, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTC + ShiftLeft(1, And(PRTC, 0x0f), IRQ0) + + Return (RTLC) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTC) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTC, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKD) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 4) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTD) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLD, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLD, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTD + ShiftLeft(1, And(PRTD, 0x0f), IRQ0) + + Return (RTLD) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTD) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTD, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKE) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 5) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTE) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLE, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLE, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTE + ShiftLeft(1, And(PRTE, 0x0f), IRQ0) + + Return (RTLE) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTE) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTE, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKF) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 6) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTF) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLF, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLF, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTF + ShiftLeft(1, And(PRTF, 0x0f), IRQ0) + + Return (RTLF) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTF) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTF, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKG) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 7) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTG) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLG, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLG, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTG + ShiftLeft(1, And(PRTG, 0x0f), IRQ0) + + Return (RTLG) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTG) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTG, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKH) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 8) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTH) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLH, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLH, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTH + ShiftLeft(1, And(PRTH, 0x0f), IRQ0) + + Return (RTLH) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTH) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTH, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl new file mode 100644 index 0000000000..940f853e5a --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// PCI Interrupt Routing +Method(_PRT) +{ + /* + * PICM comes from _PIC, which returns the following: + * 0 – PIC mode + * 1 – APIC mode + * 2 – SAPIC mode + */ + If (PICM) { + Return (Package() { + #undef PIC_MODE + #include "irq_helper.h" + PCI_DEV_PIRQ_ROUTES + }) + } Else { + Return (Package() { + #define PIC_MODE + #include "irq_helper.h" + PCI_DEV_PIRQ_ROUTES + }) + } +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl b/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl new file mode 100644 index 0000000000..93c3bc1f30 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl @@ -0,0 +1,255 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel LPC Bus Device - 0:1f.0 + +Device (LPCB) +{ + Name(_ADR, 0x001f0000) + + OperationRegion(LPC0, PCI_Config, 0x00, 0x100) + Field (LPC0, AnyAcc, NoLock, Preserve) + { + Offset (0x40), + PMBS, 16, // ABASE + Offset (0x60), // Interrupt Routing Registers + PRTA, 8, + PRTB, 8, + PRTC, 8, + PRTD, 8, + Offset (0x68), + PRTE, 8, + PRTF, 8, + PRTG, 8, + PRTH, 8, + + Offset (0x80), // IO Decode Ranges + IOD0, 8, + IOD1, 8, + + Offset (0xb8), // GPIO Routing Control + GR00, 2, + GR01, 2, + GR02, 2, + GR03, 2, + GR04, 2, + GR05, 2, + GR06, 2, + GR07, 2, + GR08, 2, + GR09, 2, + GR10, 2, + GR11, 2, + GR12, 2, + GR13, 2, + GR14, 2, + GR15, 2, + + Offset (0xf0), // RCBA + RCEN, 1, + , 13, + RCBA, 18, + } + + #include "irqlinks.asl" + + #include "acpi/ec.asl" + + Device (DMAC) // DMA Controller + { + Name(_HID, EISAID("PNP0200")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x00, 0x00, 0x01, 0x20) + IO (Decode16, 0x81, 0x81, 0x01, 0x11) + IO (Decode16, 0x93, 0x93, 0x01, 0x0d) + IO (Decode16, 0xc0, 0xc0, 0x01, 0x20) + DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 } + }) + } + + Device (FWH) // Firmware Hub + { + Name (_HID, EISAID("INT0800")) + Name (_CRS, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xff000000, 0x01000000) + }) + } + + Device (HPET) + { + Name (_HID, EISAID("PNP0103")) + Name (_CID, 0x010CD041) + + Name(BUF0, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) + }) + + Method (_STA, 0) // Device Status + { + If (HPTE) { + // Note: Ancient versions of Windows don't want + // to see the HPET in order to work right + If (LGreaterEqual(OSYS, 2001)) { + Return (0xf) // Enable and show device + } Else { + Return (0xb) // Enable and don't show device + } + } + + Return (0x0) // Not enabled, don't show. + } + + Method (_CRS, 0, Serialized) // Current resources + { + If (HPTE) { + CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) + If (Lequal(HPAS, 1)) { + Store(0xfed01000, HPT0) + } + + If (Lequal(HPAS, 2)) { + Store(0xfed02000, HPT0) + } + + If (Lequal(HPAS, 3)) { + Store(0xfed03000, HPT0) + } + } + + Return (BUF0) + } + } + + Device(PIC) // 8259 Interrupt Controller + { + Name(_HID,EISAID("PNP0000")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x20, 0x20, 0x01, 0x02) + IO (Decode16, 0x24, 0x24, 0x01, 0x02) + IO (Decode16, 0x28, 0x28, 0x01, 0x02) + IO (Decode16, 0x2c, 0x2c, 0x01, 0x02) + IO (Decode16, 0x30, 0x30, 0x01, 0x02) + IO (Decode16, 0x34, 0x34, 0x01, 0x02) + IO (Decode16, 0x38, 0x38, 0x01, 0x02) + IO (Decode16, 0x3c, 0x3c, 0x01, 0x02) + IO (Decode16, 0xa0, 0xa0, 0x01, 0x02) + IO (Decode16, 0xa4, 0xa4, 0x01, 0x02) + IO (Decode16, 0xa8, 0xa8, 0x01, 0x02) + IO (Decode16, 0xac, 0xac, 0x01, 0x02) + IO (Decode16, 0xb0, 0xb0, 0x01, 0x02) + IO (Decode16, 0xb4, 0xb4, 0x01, 0x02) + IO (Decode16, 0xb8, 0xb8, 0x01, 0x02) + IO (Decode16, 0xbc, 0xbc, 0x01, 0x02) + IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02) + IRQNoFlags () { 2 } + }) + } + + Device(MATH) // FPU + { + Name (_HID, EISAID("PNP0C04")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0xf0, 0xf0, 0x01, 0x01) + IRQNoFlags() { 13 } + }) + } + + Device(LDRC) // LPC device: Resource consumption + { + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 2) + + Name (RBUF, ResourceTemplate() + { + IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO + IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO + IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status + IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post + IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI + //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap + IO (Decode16, DEFAULT_ABASE, DEFAULT_ABASE, 0x1, 0x80) // ICH7-M ACPI + IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO + }) + + Method (_CRS, 0, NotSerialized) + { + Return (RBUF) + } + } + + Device (RTC) // Real Time Clock + { + Name (_HID, EISAID("PNP0B00")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x70, 0x70, 1, 8) +// Disable as Windows doesn't like it, and systems don't seem to use it. +// IRQNoFlags() { 8 } + }) + } + + Device (TIMR) // Intel 8254 timer + { + Name(_HID, EISAID("PNP0100")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x40, 0x40, 0x01, 0x04) + IO (Decode16, 0x50, 0x50, 0x10, 0x04) + IRQNoFlags() {0} + }) + } + + // Include mainboard's superio.asl file. + #include "acpi/superio.asl" + +#ifdef ENABLE_TPM + Device (TPM) // Trusted Platform Module + { + Name(_HID, EISAID("IFX0102")) + Name(_CID, 0x310cd041) + Name(_UID, 1) + + Method(_STA, 0) + { + If (TPMP) { + Return (0xf) + } + Return (0x0) + } + + Name(_CRS, ResourceTemplate() { + IO (Decode16, 0x2e, 0x2e, 0x01, 0x02) + IO (Decode16, 0x6f0, 0x6f0, 0x01, 0x10) + Memory32Fixed (ReadWrite, 0xfed40000, 0x5000) + IRQ (Edge, Activehigh, Exclusive) { 6 } + }) + } +#endif +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl new file mode 100644 index 0000000000..09e9e3f966 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl @@ -0,0 +1,170 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel 6/7 Series PCH PCIe support */ + +// PCI Express Ports + +Method (IRQM, 1, Serialized) { + + /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ + Name (IQAA, Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + Package() { 0x0000ffff, 2, 0, 18 }, + Package() { 0x0000ffff, 3, 0, 19 } }) + Name (IQAP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) + + /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ + Name (IQBA, Package() { + Package() { 0x0000ffff, 0, 0, 17 }, + Package() { 0x0000ffff, 1, 0, 18 }, + Package() { 0x0000ffff, 2, 0, 19 }, + Package() { 0x0000ffff, 3, 0, 16 } }) + Name (IQBP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) + + /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ + Name (IQCA, Package() { + Package() { 0x0000ffff, 0, 0, 18 }, + Package() { 0x0000ffff, 1, 0, 19 }, + Package() { 0x0000ffff, 2, 0, 16 }, + Package() { 0x0000ffff, 3, 0, 17 } }) + Name (IQCP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) + + /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ + Name (IQDA, Package() { + Package() { 0x0000ffff, 0, 0, 19 }, + Package() { 0x0000ffff, 1, 0, 16 }, + Package() { 0x0000ffff, 2, 0, 17 }, + Package() { 0x0000ffff, 3, 0, 18 } }) + Name (IQDP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) + + Switch (ToInteger (Arg0)) { + /* PCIe Root Port 1 */ + Case (Package() { 1 }) { + If (PICM) { + Return (IQAA) + } Else { + Return (IQAP) + } + } + + /* PCIe Root Port 2 */ + Case (Package() { 2 }) { + If (PICM) { + Return (IQBA) + } Else { + Return (IQBP) + } + } + + /* PCIe Root Port 3 */ + Case (Package() { 3 }) { + If (PICM) { + Return (IQCA) + } Else { + Return (IQCP) + } + } + + /* PCIe Root Port 4 */ + Case (Package() { 4 }) { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + + Default { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + } +} + +Device (RP01) +{ + Name (_ADR, 0x00010000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP02) +{ + Name (_ADR, 0x00020000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP03) +{ + Name (_ADR, 0x00030000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP04) +{ + Name (_ADR, 0x00040000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl new file mode 100644 index 0000000000..fedd9c97c6 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Included in each PCIe Root Port device */ + +OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) +Field (RPCS, AnyAcc, NoLock, Preserve) +{ + Offset (0x4c), // Link Capabilities + , 24, + RPPN, 8, // Root Port Number +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sata.asl b/src/southbridge/intel/fsp_rangeley/acpi/sata.asl new file mode 100644 index 0000000000..c331257f1f --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/sata.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel SATA Controller 0:17.0 + +// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily +// pluggable + +Device (SATA) +{ + Name (_ADR, 0x00170000) + + Device (PRID) + { + Name (_ADR, 0) + + // Get Timing Mode + Method (_GTM) + { + Name(PBUF, Buffer(20) { + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00 }) + + CreateDwordField (PBUF, 0, PIO0) + CreateDwordField (PBUF, 4, DMA0) + CreateDwordField (PBUF, 8, PIO1) + CreateDwordField (PBUF, 12, DMA1) + CreateDwordField (PBUF, 16, FLAG) + + // TODO fill return structure + + Return (PBUF) + } + + // Set Timing Mode + Method (_STM, 3) + { + CreateDwordField (Arg0, 0, PIO0) + CreateDwordField (Arg0, 4, DMA0) + CreateDwordField (Arg0, 8, PIO1) + CreateDwordField (Arg0, 12, DMA1) + CreateDwordField (Arg0, 16, FLAG) + + // TODO: Do the deed + } + + Device (DSK0) + { + Name (_ADR, 0) + // TODO: _RMV ? + // TODO: _GTF ? + } + + Device (DSK1) + { + Name (_ADR, 1) + + // TODO: _RMV ? + // TODO: _GTF ? + } + + } +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl b/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl new file mode 100644 index 0000000000..b1b976c89c --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Name(\_S0, Package(){0x0,0x0,0x0,0x0}) + +/* + * S1 and S3 sleep states are not supported + * Name(\_S1, Package(){0x1,0x1,0x0,0x0}) + * Name(\_S3, Package(){0x5,0x5,0x0,0x0}) + */ + +Name(\_S4, Package(){0x6,0x6,0x0,0x0}) +Name(\_S5, Package(){0x7,0x7,0x0,0x0}) diff --git a/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl b/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl new file mode 100644 index 0000000000..49093e11de --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl @@ -0,0 +1,241 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel SMBus Controller 0:1f.3 + +Device (SBUS) +{ + Name (_ADR, 0x001f0003) + +#ifdef ENABLE_SMBUS_METHODS + OperationRegion (SMBP, PCI_Config, 0x00, 0x100) + Field(SMBP, DWordAcc, NoLock, Preserve) + { + Offset(0x40), + , 2, + I2CE, 1 + } + + OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) + Field (SMBI, ByteAcc, NoLock, Preserve) + { + HSTS, 8, // Host Status + , 8, + HCNT, 8, // Host Control + HCMD, 8, // Host Command + TXSA, 8, // Transmit Slave Address + DAT0, 8, // Host Data 0 + DAT1, 8, // Host Data 1 + HBDB, 8, // Host Block Data Byte + PECK, 8, // Packet Error Check + RXSA, 8, // Receive Slave Address + RXDA, 16, // Receive Slave Data + AUXS, 8, // Auxiliary Status + AUXC, 8, // Auxiliary Control + SLPC, 8, // SMLink Pin Control + SBPC, 8, // SMBus Pin Control + SSTS, 8, // Slave Status + SCMD, 8, // Slave Command + NADR, 8, // Notify Device Address + NDLB, 8, // Notify Data Low Byte + NDLH, 8, // Notify Data High Byte + } + + // Kill all SMBus communication + Method (KILL, 0, Serialized) + { + Or (HCNT, 0x02, HCNT) // Send Kill + Or (HSTS, 0xff, HSTS) // Clean Status + } + + // Check if last operation completed + // return Failure = 0, Success = 1 + Method (CMPL, 0, Serialized) + { + Store (4000, Local0) // Timeout 200ms in 50us steps + While (Local0) { + If (And(HSTS, 0x02)) { // Completion Status? + Return (1) // Operation Completed + } Else { + Stall (50) + Decrement (Local0) + If (LEqual(Local0, 0)) { + KILL() + } + } + } + + Return (0) // Failure + } + + + // Wait for SMBus to become ready + Method (SRDY, 0, Serialized) + { + Store (200, Local0) // Timeout 200ms + While (Local0) { + If (And(HSTS, 0x40)) { // IN_USE? + Sleep(1) // Wait 1ms + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + Return (1) + } + } Else { + Store (0, Local0) // We're ready + } + } + + Store (4000, Local0) // Timeout 200ms (50us * 4000) + While (Local0) { + If (And (HSTS, 0x01)) { // Host Busy? + Stall(50) // Wait 50us + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + KILL() + } + } Else { + Return (0) // Success + } + } + + Return (1) // Failure + } + + // SMBus Send Byte + // Arg0: Address + // Arg1: Data + // Return: 1 = Success, 0=Failure + + Method (SSXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Data + + Store (0x48, HCNT) // Start + Byte Data Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Receive Byte + // Arg0: Address + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + + Store (0x44, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } + + + // SMBus Write Byte + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 1 = Success, 0=Failure + + Method (SWRB, 3, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Command + Store (Arg2, DAT0) // Write Data + + Store (0x48, HCNT) // Start + Byte Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Read Byte + // Arg0: Address + // Arg1: Command + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRDB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + Store (Arg1, HCMD) // Command + + Store (0x48, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } +#endif +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/soc.asl b/src/southbridge/intel/fsp_rangeley/acpi/soc.asl new file mode 100644 index 0000000000..d3c67325d7 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/soc.asl @@ -0,0 +1,277 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel Rangeley support */ + +#include "../soc.h" + +Scope(\) +{ + // IO-Trap at 0x800. This is the ACPI->SMI communication interface. + + OperationRegion(IO_T, SystemIO, 0x800, 0x10) + Field(IO_T, ByteAcc, NoLock, Preserve) + { + Offset(0x8), + TRP0, 8 // IO-Trap at 0x808 + } + +#if IS_ENABLED(CONFIG_ACPI_INCLUDE_PMIO) + // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) + OperationRegion(PMIO, SystemIO, DEFAULT_ABASE, 0x80) + Field(PMIO, ByteAcc, NoLock, Preserve) + { + Offset(0x20), // GPE0_STS + , 16, + GS00, 1, // GPIO00 SCI/Wake Status + GS01, 1, // GPIO01 SCI/Wake Status + GS02, 1, // GPIO02 SCI/Wake Status + GS03, 1, // GPIO03 SCI/Wake Status + GS04, 1, // GPIO04 SCI/Wake Status + GS05, 1, // GPIO05 SCI/Wake Status + GS06, 1, // GPIO06 SCI/Wake Status + GS07, 1, // GPIO07 SCI/Wake Status + GS08, 1, // GPIO08 SCI/Wake Status + GS09, 1, // GPIO09 SCI/Wake Status + GS10, 1, // GPIO10 SCI/Wake Status + GS11, 1, // GPIO11 SCI/Wake Status + GS12, 1, // GPIO12 SCI/Wake Status + GS13, 1, // GPIO13 SCI/Wake Status + GS14, 1, // GPIO14 SCI/Wake Status + GS15, 1, // GPIO15 SCI/Wake Status + Offset(0x28), // GPE0_EN + , 16, + GE00, 1, // GPIO00 SCI/Wake Enable + GE01, 1, // GPIO01 SCI/Wake Enable + GE02, 1, // GPIO02 SCI/Wake Enable + GE03, 1, // GPIO03 SCI/Wake Enable + GE04, 1, // GPIO04 SCI/Wake Enable + GE05, 1, // GPIO05 SCI/Wake Enable + GE06, 1, // GPIO06 SCI/Wake Enable + GE07, 1, // GPIO07 SCI/Wake Enable + GE08, 1, // GPIO08 SCI/Wake Enable + GE09, 1, // GPIO09 SCI/Wake Enable + GE10, 1, // GPIO10 SCI/Wake Enable + GE11, 1, // GPIO11 SCI/Wake Enable + GE12, 1, // GPIO12 SCI/Wake Enable + GE13, 1, // GPIO13 SCI/Wake Enable + GE14, 1, // GPIO14 SCI/Wake Enable + GE15, 1, // GPIO15 SCI/Wake Enable + Offset(0x42), // General Purpose Control + , 1, // skip 1 bit + GPEC, 1, // SWGPE_CTRL + } +#endif + +#if IS_ENABLED(CONFIG_ACPI_INCLUDE_GPIO) + // GPIO IO mapped registers (0x1f.0 reg 0x48.l) + OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c) + Field(GPIO, ByteAcc, NoLock, Preserve) + { + Offset(0x00), // GPIO Use Select + GU00, 8, + GU01, 8, + GU02, 8, + GU03, 8, + Offset(0x04), // GPIO IO Select + GIO0, 8, + GIO1, 8, + GIO2, 8, + GIO3, 8, + Offset(0x0c), // GPIO Level + GL00, 1, + GP01, 1, + GP02, 1, + GP0e, 1, + GP04, 1, + GP05, 1, + GP06, 1, + GP07, 1, + GP08, 1, + GP09, 1, + GP10, 1, + GP11, 1, + GP12, 1, + GP13, 1, + GP14, 1, + GP15, 1, + GP16, 1, + GP17, 1, + GP18, 1, + GP19, 1, + GP20, 1, + GP21, 1, + GP22, 1, + GP23, 1, + GP24, 1, + GP25, 1, + GP26, 1, + GP27, 1, + GP28, 1, + GP29, 1, + GP30, 1, + GP31, 1, + Offset(0x18), // GPIO Blink + GB00, 8, + GB01, 8, + GB02, 8, + GB03, 8, + Offset(0x2c), // GPIO Invert + GIV0, 8, + GIV1, 8, + GIV2, 8, + GIV3, 8, + Offset(0x30), // GPIO Use Select 2 + GU04, 8, + GU05, 8, + GU06, 8, + GU07, 8, + Offset(0x34), // GPIO IO Select 2 + GIO4, 8, + GIO5, 8, + GIO6, 8, + GIO7, 8, + Offset(0x38), // GPIO Level 2 + GP32, 1, + GP33, 1, + GP34, 1, + GP35, 1, + GP36, 1, + GP37, 1, + GP38, 1, + GP39, 1, + GP40, 1, + GP41, 1, + GP42, 1, + GP43, 1, + GP44, 1, + GP45, 1, + GP46, 1, + GP47, 1, + GP48, 1, + GP49, 1, + GP50, 1, + GP51, 1, + GP52, 1, + GP53, 1, + GP54, 1, + GP55, 1, + GP56, 1, + GP57, 1, + GP58, 1, + GP59, 1, + GP60, 1, + GP61, 1, + GP62, 1, + GP63, 1, + Offset(0x40), // GPIO Use Select 3 + GU08, 8, + GU09, 4, + Offset(0x44), // GPIO IO Select 3 + GIO8, 8, + GIO9, 4, + Offset(0x48), // GPIO Level 3 + GP64, 1, + GP65, 1, + GP66, 1, + GP67, 1, + GP68, 1, + GP69, 1, + GP70, 1, + GP71, 1, + GP72, 1, + GP73, 1, + GP74, 1, + GP75, 1, + } +#endif + + // ICH7 Root Complex Register Block. Memory Mapped through RCBA) + OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) + Field(RCRB, DWordAcc, Lock, Preserve) + { + Offset(0x0000), // Backbone + Offset(0x1000), // Chipset + Offset(0x3000), // Legacy Configuration Registers + Offset(0x3404), // High Performance Timer Configuration + HPAS, 2, // Address Select + , 5, + HPTE, 1, // Address Enable + Offset(0x3418), // FD (Function Disable) + , 1, // Reserved + PCID, 1, // PCI bridge disable + SA1D, 1, // SATA1 disable + SMBD, 1, // SMBUS disable + HDAD, 1, // Azalia disable + , 8, // Reserved + EH2D, 1, // EHCI #2 disable + LPBD, 1, // LPC bridge disable + EH1D, 1, // EHCI #1 disable + RP1D, 1, // Root Port 1 disable + RP2D, 1, // Root Port 2 disable + RP3D, 1, // Root Port 3 disable + RP4D, 1, // Root Port 4 disable + TTRD, 1, // Thermal sensor registers disable + SA2D, 1, // SATA2 disable + Offset(0x3428), // FD2 (Function Disable 2) + BDFD, 1, // Display BDF + ME1D, 1, // ME Interface 1 disable + ME2D, 1, // ME Interface 2 disable + IDRD, 1, // IDE redirect disable + KTCT, 1, // Keyboard Text redirect disable + } +} + +// PCI Express Ports 0:[1-4].0 +#include "pcie.asl" + +// USB 0:16.0 +#include "usb.asl" + +// LPC Bridge 0:1f.0 +#include "lpc.asl" + +// SATA 0:17.0 +#include "sata.asl" + +// SMBus 0:1f.3 +#include "smbus.asl" + +// IRQ routing for each PCI device +#include "irqroute.asl" + +Method (_OSC, 4) +{ + /* Check for proper GUID */ + If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } + Else + { + /* Unrecognized UUID */ + CreateDWordField (Arg3, 0, CDW1) + Or (CDW1, 4, CDW1) + Return (Arg3) + } +} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/usb.asl b/src/southbridge/intel/fsp_rangeley/acpi/usb.asl new file mode 100644 index 0000000000..ccf5907c25 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/acpi/usb.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel Rangeley USB support */ + +// EHCI Controller 0:16.0 + +Device (EHC1) +{ + Name(_ADR, 0x00160000) + + Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake + + // Leave USB ports on for to allow Wake from USB + + Method(_S3D,0) // Highest D State in S3 State + { + Return (2) + } + + Method(_S4D,0) // Highest D State in S4 State + { + Return (2) + } + + Device (HUB7) + { + Name (_ADR, 0x00000000) + + Device (PRT1) { Name (_ADR, 1) } // USB Port 0 + Device (PRT2) { Name (_ADR, 2) } // USB Port 1 + Device (PRT3) { Name (_ADR, 3) } // USB Port 2 + Device (PRT4) { Name (_ADR, 4) } // USB Port 3 + } +} diff --git a/src/southbridge/intel/fsp_rangeley/chip.h b/src/southbridge/intel/fsp_rangeley/chip.h new file mode 100644 index 0000000000..215454c2fe --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/chip.h @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H +#define SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H + +#include <arch/acpi.h> + +struct southbridge_intel_fsp_rangeley_config { + + /** + * GPI Routing configuration + * + * Only the lower two bits have a meaning: + * 00: No effect + * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + * 10: SCI (if corresponding GPIO_EN bit is also set) + * 11: reserved + */ + uint8_t gpi0_routing; + uint8_t gpi1_routing; + uint8_t gpi2_routing; + uint8_t gpi3_routing; + uint8_t gpi4_routing; + uint8_t gpi5_routing; + uint8_t gpi6_routing; + uint8_t gpi7_routing; + uint8_t gpi8_routing; + uint8_t gpi9_routing; + uint8_t gpi10_routing; + uint8_t gpi11_routing; + uint8_t gpi12_routing; + uint8_t gpi13_routing; + uint8_t gpi14_routing; + uint8_t gpi15_routing; + + uint32_t gpe0_en; + uint16_t alt_gp_smi_en; + + /* IDE configuration */ + uint32_t ide_legacy_combined; + uint32_t sata_ahci; + uint8_t sata_port_map; + uint32_t sata_port0_gen3_tx; + uint32_t sata_port1_gen3_tx; + + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable linear PCIe Root Port function numbers starting at zero */ + uint8_t pcie_port_coalesce; + + /* Override PCIe ASPM */ + uint8_t pcie_aspm_f0; + uint8_t pcie_aspm_f1; + uint8_t pcie_aspm_f2; + uint8_t pcie_aspm_f3; + uint8_t pcie_aspm_f4; + uint8_t pcie_aspm_f5; + uint8_t pcie_aspm_f6; + uint8_t pcie_aspm_f7; + + /* ACPI configuration */ + uint8_t fadt_pm_profile; + uint16_t fadt_boot_arch; + +}; + +#endif /* SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H */ diff --git a/src/southbridge/intel/fsp_rangeley/early_init.c b/src/southbridge/intel/fsp_rangeley/early_init.c new file mode 100644 index 0000000000..0697785b21 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/early_init.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <pc80/mc146818rtc.h> +#include <build.h> +#include <device/pci_def.h> +#include "pci_devs.h" +#include "soc.h" + +static void rangeley_setup_bars(void) +{ + /* Setting up Southbridge. */ + printk(BIOS_DEBUG, "Setting up static southbridge registers..."); + pci_write_config32(LPC_BDF, RCBA, DEFAULT_RCBA | RCBA_ENABLE); + pci_write_config32(LPC_BDF, ABASE, DEFAULT_ABASE | SET_BAR_ENABLE); + pci_write_config32(LPC_BDF, PBASE, DEFAULT_PBASE | SET_BAR_ENABLE); + printk(BIOS_DEBUG, " done.\n"); + + printk(BIOS_DEBUG, "Disabling Watchdog timer..."); + /* Disable the watchdog reboot and turn off the watchdog timer */ + write8(DEFAULT_PBASE + PMC_CFG, read8(DEFAULT_PBASE + PMC_CFG) | + NO_REBOOT); // disable reboot on timer trigger + outw(DEFAULT_ABASE + TCO1_CNT, inw(DEFAULT_ABASE + TCO1_CNT) | + TCO_TMR_HALT); // disable watchdog timer + + printk(BIOS_DEBUG, " done.\n"); + +} + +static void reset_rtc(void) +{ + uint32_t pbase = pci_read_config32(LPC_BDF, PBASE) & + 0xfffffff0; + uint32_t gen_pmcon1 = read32(pbase + GEN_PMCON1); + int rtc_failed = !!(gen_pmcon1 & RPS); + + if (rtc_failed) { + printk(BIOS_DEBUG, + "RTC Failure detected. Resetting Date to %x/%x/%x%x\n", + COREBOOT_BUILD_MONTH_BCD, + COREBOOT_BUILD_DAY_BCD, + 0x20, + COREBOOT_BUILD_YEAR_BCD); + + /* Clear the power failure flag */ + write32(DEFAULT_PBASE + GEN_PMCON1, gen_pmcon1 & ~RPS); + } + + rtc_init(rtc_failed); +} + +void rangeley_sb_early_initialization(void) +{ + /* Setup all BARs required for early PCIe and raminit */ + rangeley_setup_bars(); + + reset_rtc(); +} diff --git a/src/southbridge/intel/fsp_rangeley/early_smbus.c b/src/southbridge/intel/fsp_rangeley/early_smbus.c new file mode 100644 index 0000000000..c89d17663e --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/early_smbus.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include "soc.h" +#include "smbus.h" + +void enable_smbus(void) +{ + device_t dev; + + /* Set the SMBus device statically. */ + dev = PCI_DEV(0x0, 0x1f, 0x3); + + /* Check to make sure we've got the right device. */ + if (pci_read_config16(dev, 0x0) != 0x8086) { + die("SMBus controller not found!"); + } + + /* Set SMBus I/O base. */ + pci_write_config32(dev, SMB_BASE, + SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + + /* Set SMBus enable. */ + pci_write_config8(dev, HOSTC, HST_EN); + + /* Set SMBus I/O space enable. */ + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + + /* Disable interrupt generation. */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* Clear any lingering errors, so transactions can run. */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + print_debug("SMBus controller enabled.\n"); +} + +int smbus_read_byte(unsigned device, unsigned address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} diff --git a/src/southbridge/intel/fsp_rangeley/early_spi.c b/src/southbridge/intel/fsp_rangeley/early_spi.c new file mode 100644 index 0000000000..ef8cc98fc6 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/early_spi.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <delay.h> +#include "soc.h" + +#define SPI_DELAY 10 /* 10us */ +#define SPI_RETRY 200000 /* 2s */ + +static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) +{ + u32 *ptr32 = (u32*)buffer; + u32 i; + + /* Clear status bits */ + RCBA16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | + SPIBAR_HSFS_FDONE; + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); + return -1; + } + + /* Set flash address */ + RCBA32(SPIBAR_FADDR) = offset; + + /* Setup read transaction */ + RCBA16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | + SPIBAR_HSFC_CYCLE_READ; + + /* Start transactinon */ + RCBA16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; + + /* Wait for completion */ + for (i = 0; i < SPI_RETRY; i++) { + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + /* Cycle in progress, wait 1ms */ + udelay(SPI_DELAY); + continue; + } + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { + printk(BIOS_ERR, "SPI ERROR: Access Error\n"); + return -1; + + } + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { + printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); + return -1; + } + break; + } + + if (i >= SPI_RETRY) { + printk(BIOS_ERR, "SPI ERROR: Timeout\n"); + return -1; + } + + /* Read the data */ + for (i = 0; i < size; i+=sizeof(u32)) { + if (size-i >= 4) { + /* reading >= dword */ + *ptr32++ = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); + } else { + /* reading < dword */ + u8 j, *ptr8 = (u8*)ptr32; + u32 temp = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); + for (j = 0; j < (size-i); j++) { + *ptr8++ = temp & 0xff; + temp >>= 8; + } + } + } + + return size; +} + +int early_spi_read(u32 offset, u32 size, u8 *buffer) +{ + u32 current = 0; + + while (size > 0) { + u8 count = (size < 64) ? size : 64; + if (early_spi_read_block(offset + current, count, + buffer + current) < 0) + return -1; + size -= count; + current += count; + } + + return 0; +} diff --git a/src/southbridge/intel/fsp_rangeley/early_usb.c b/src/southbridge/intel/fsp_rangeley/early_usb.c new file mode 100644 index 0000000000..40759b3387 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/early_usb.c @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include "soc.h" + +#define SOC_EHCI1_TEMP_BAR0 0xe8000000 + +/* + * Setup USB controller MMIO BAR to prevent the + * reference code from resetting the controller. + * + * The BAR will be re-assigned during device + * enumeration so these are only temporary. + */ +void enable_usb_bar(void) +{ + device_t usb0 = SOC_EHCI1_DEV; + u32 cmd; + + /* USB Controller 0 */ + pci_write_config32(usb0, PCI_BASE_ADDRESS_0, + SOC_EHCI1_TEMP_BAR0); + cmd = pci_read_config32(usb0, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb0, PCI_COMMAND, cmd); +} diff --git a/src/southbridge/intel/fsp_rangeley/gpio.c b/src/southbridge/intel/fsp_rangeley/gpio.c new file mode 100644 index 0000000000..8569b967d4 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/gpio.c @@ -0,0 +1,108 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> + +#include "soc.h" +#include "gpio.h" + +#define MAX_GPIO_NUMBER 31 /* zero based */ + +void setup_soc_gpios(const struct soc_gpio_map *gpio) +{ + u16 gpiobase = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf; + u32 cfiobase = pci_read_config32(SOC_LPC_DEV, IOBASE) & ~0xf; + u32 cfio_cnt = 0; + + + /* GPIO */ + if (gpio->core.level) + outl(*((u32*)gpio->core.level), gpiobase + GPIO_SC_GP_LVL); + if (gpio->core.mode) + outl(*((u32*)gpio->core.mode), gpiobase + GPIO_SC_USE_SEL); + if (gpio->core.direction) + outl(*((u32*)gpio->core.direction), gpiobase + GPIO_SC_IO_SEL); + if (gpio->core.tpe) + outl(*((u32*)gpio->core.tpe), gpiobase + GPIO_SC_TPE); + if (gpio->core.tne) + outl(*((u32*)gpio->core.tne), gpiobase + GPIO_SC_TNE); + if (gpio->core.ts) + outl(*((u32*)gpio->core.ts), gpiobase + GPIO_SC_TS); + + /* GPIO SUS Well Set 1 */ + if (gpio->sus.level) + outl(*((u32*)gpio->sus.level), gpiobase + GPIO_SUS_GP_LVL); + if (gpio->sus.mode) + outl(*((u32*)gpio->sus.mode), gpiobase + GPIO_SUS_USE_SEL); + if (gpio->sus.direction) + outl(*((u32*)gpio->sus.direction), gpiobase + GPIO_SUS_IO_SEL); + if (gpio->sus.tpe) + outl(*((u32*)gpio->sus.tpe), gpiobase + GPIO_SUS_TPE); + if (gpio->sus.tne) + outl(*((u32*)gpio->sus.tne), gpiobase + GPIO_SUS_TNE); + if (gpio->sus.ts) + outl(*((u32*)gpio->sus.ts), gpiobase + GPIO_SUS_TS); + if (gpio->sus.we) + outl(*((u32*)gpio->sus.we), gpiobase + GPIO_SUS_WE); + + /* GPIO PAD settings */ + /* CFIO Core Well Set 1 */ + if ((gpio->core.cfio_init != NULL) || (gpio->core.cfio_entrynum != 0)) { + write32(cfiobase + 0x0700, (u32)0x01001002); + for(cfio_cnt = 0; cfio_cnt < gpio->core.cfio_entrynum; cfio_cnt++) { + if (!((u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0)) + continue; + write32(cfiobase + CFIO_PAD_CONF0 + (16*cfio_cnt), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0); + write32(cfiobase + CFIO_PAD_CONF1 + (16*cfio_cnt), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_1); + write32(cfiobase + CFIO_PAD_VAL + (16*cfio_cnt), (u32)gpio->core.cfio_init[cfio_cnt].pad_val); + write32(cfiobase + CFIO_PAD_DFT + (16*cfio_cnt), (u32)gpio->core.cfio_init[cfio_cnt].pad_dft); + } + write32(cfiobase + 0x0700, (u32)0x01041002); + } + + /* CFIO SUS Well Set 1 */ + if ((gpio->sus.cfio_init != NULL) || (gpio->sus.cfio_entrynum != 0)) { + write32(cfiobase + 0x1700, (u32)0x01001002); + for(cfio_cnt = 0; cfio_cnt < gpio->sus.cfio_entrynum; cfio_cnt++) { + if (!((u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0)) + continue; + write32(cfiobase + CFIO_PAD_CONF0 + 0x1000 + (16*cfio_cnt), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0); + write32(cfiobase + CFIO_PAD_CONF1 + 0x1000 + (16*cfio_cnt), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_1); + write32(cfiobase + CFIO_PAD_VAL + 0x1000 + (16*cfio_cnt), (u32)gpio->sus.cfio_init[cfio_cnt].pad_val); + write32(cfiobase + CFIO_PAD_DFT + 0x1000 + (16*cfio_cnt), (u32)gpio->sus.cfio_init[cfio_cnt].pad_dft); + } + write32(cfiobase + 0x1700, (u32)0x01041002); + } +} + +int get_gpio(int gpio_num) +{ + u16 gpio_base = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf; + int bit; + + if (gpio_num > MAX_GPIO_NUMBER) + return 0; /* Ignore wrong gpio numbers. */ + + bit = gpio_num % 32; + + return (inl(gpio_base + GPIO_SC_USE_SEL) >> bit) & 1; +} diff --git a/src/southbridge/intel/fsp_rangeley/gpio.h b/src/southbridge/intel/fsp_rangeley/gpio.h new file mode 100644 index 0000000000..4f4a6cdf86 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/gpio.h @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef INTEL_RANGELEY_GPIO_H +#define INTEL_RANGELEY_GPIO_H + +#define GPIO_MODE_NATIVE 0 +#define GPIO_MODE_GPIO 1 +#define GPIO_MODE_NONE 1 + +#define GPIO_DIR_OUTPUT 0 +#define GPIO_DIR_INPUT 1 + +#define GPIO_LEVEL_LOW 0 +#define GPIO_LEVEL_HIGH 1 + +#define GPIO_TPE_DISABLE 0 +#define GPIO_TPE_ENABLE 1 + +#define GPIO_TNE_DISABLE 0 +#define GPIO_TNE_ENABLE 1 + +#define GPIO_TS_DISABLE 0 +#define GPIO_TS_ENABLE 1 + +#define GPIO_WE_DISABLE 0 +#define GPIO_WE_ENABLE 1 + +struct soc_gpio { + u32 gpio0 : 1; + u32 gpio1 : 1; + u32 gpio2 : 1; + u32 gpio3 : 1; + u32 gpio4 : 1; + u32 gpio5 : 1; + u32 gpio6 : 1; + u32 gpio7 : 1; + u32 gpio8 : 1; + u32 gpio9 : 1; + u32 gpio10 : 1; + u32 gpio11 : 1; + u32 gpio12 : 1; + u32 gpio13 : 1; + u32 gpio14 : 1; + u32 gpio15 : 1; + u32 gpio16 : 1; + u32 gpio17 : 1; + u32 gpio18 : 1; + u32 gpio19 : 1; + u32 gpio20 : 1; + u32 gpio21 : 1; + u32 gpio22 : 1; + u32 gpio23 : 1; + u32 gpio24 : 1; + u32 gpio25 : 1; + u32 gpio26 : 1; + u32 gpio27 : 1; + u32 gpio28 : 1; + u32 gpio29 : 1; + u32 gpio30 : 1; + u32 gpio31 : 1; +} __attribute__ ((packed)); + +struct soc_cfio { + u32 pad_conf_0; + u32 pad_conf_1; + u32 pad_val; + u32 pad_dft; +} __attribute__ ((packed)); + +struct soc_gpio_map { + /* GPIO core */ + struct { + const struct soc_gpio *mode; + const struct soc_gpio *direction; + const struct soc_gpio *level; + const struct soc_gpio *tpe; + const struct soc_gpio *tne; + const struct soc_gpio *ts; + const struct soc_cfio *cfio_init; + const u32 cfio_entrynum; + }core; + + /* GPIO SUS */ + struct { + const struct soc_gpio *mode; + const struct soc_gpio *direction; + const struct soc_gpio *level; + const struct soc_gpio *tpe; + const struct soc_gpio *tne; + const struct soc_gpio *ts; + const struct soc_gpio *we; + const struct soc_cfio *cfio_init; + const u32 cfio_entrynum; + }sus; + + +}; + +/* Configure GPIOs with mainboard provided settings */ +void setup_soc_gpios(const struct soc_gpio_map *gpio); + +/* get GPIO pin value */ +int get_gpio(int gpio_num); +/* + * get a number comprised of multiple GPIO values. gpio_num_array points to + * the array of gpio pin numbers to scan, terminated by -1. + */ +unsigned get_gpios(const int *gpio_num_array); + +#endif diff --git a/src/southbridge/intel/fsp_rangeley/irq.h b/src/southbridge/intel/fsp_rangeley/irq.h new file mode 100644 index 0000000000..cdfd095ff6 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/irq.h @@ -0,0 +1,166 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _RANGELEY_IRQ_H_ +#define _RANGELEY_IRQ_H_ + +#define PIRQA_APIC_IRQ 16 +#define PIRQB_APIC_IRQ 17 +#define PIRQC_APIC_IRQ 18 +#define PIRQD_APIC_IRQ 19 +#define PIRQE_APIC_IRQ 20 +#define PIRQF_APIC_IRQ 21 +#define PIRQG_APIC_IRQ 22 +#define PIRQH_APIC_IRQ 23 +/* The below IRQs are for when devices are in ACPI mode. Active low. */ +#define LPE_DMA0_IRQ 24 +#define LPE_DMA1_IRQ 25 +#define LPE_SSP0_IRQ 26 +#define LPE_SSP1_IRQ 27 +#define LPE_SSP2_IRQ 28 +#define LPE_IPC2HOST_IRQ 29 +#define LPSS_I2C1_IRQ 32 +#define LPSS_I2C2_IRQ 33 +#define LPSS_I2C3_IRQ 34 +#define LPSS_I2C4_IRQ 35 +#define LPSS_I2C5_IRQ 36 +#define LPSS_I2C6_IRQ 37 +#define LPSS_I2C7_IRQ 38 +#define LPSS_HSUART1_IRQ 39 +#define LPSS_HSUART2_IRQ 40 +#define LPSS_SPI_IRQ 41 +#define LPSS_DMA1_IRQ 42 +#define LPSS_DMA2_IRQ 43 +#define SCC_EMMC_IRQ 44 +#define SCC_SDIO_IRQ 46 +#define SCC_SD_IRQ 47 +#define GPIO_NC_IRQ 48 +#define GPIO_SC_IRQ 49 +#define GPIO_SUS_IRQ 50 +/* GPIO direct / dedicated IRQs. */ +#define GPIO_S0_DED_IRQ_0 51 +#define GPIO_S0_DED_IRQ_1 52 +#define GPIO_S0_DED_IRQ_2 53 +#define GPIO_S0_DED_IRQ_3 54 +#define GPIO_S0_DED_IRQ_4 55 +#define GPIO_S0_DED_IRQ_5 56 +#define GPIO_S0_DED_IRQ_6 57 +#define GPIO_S0_DED_IRQ_7 58 +#define GPIO_S0_DED_IRQ_8 59 +#define GPIO_S0_DED_IRQ_9 60 +#define GPIO_S0_DED_IRQ_10 61 +#define GPIO_S0_DED_IRQ_11 62 +#define GPIO_S0_DED_IRQ_12 63 +#define GPIO_S0_DED_IRQ_13 64 +#define GPIO_S0_DED_IRQ_14 65 +#define GPIO_S0_DED_IRQ_15 66 +#define GPIO_S5_DED_IRQ_0 67 +#define GPIO_S5_DED_IRQ_1 68 +#define GPIO_S5_DED_IRQ_2 69 +#define GPIO_S5_DED_IRQ_3 70 +#define GPIO_S5_DED_IRQ_4 71 +#define GPIO_S5_DED_IRQ_5 72 +#define GPIO_S5_DED_IRQ_6 73 +#define GPIO_S5_DED_IRQ_7 74 +#define GPIO_S5_DED_IRQ_8 75 +#define GPIO_S5_DED_IRQ_9 76 +#define GPIO_S5_DED_IRQ_10 77 +#define GPIO_S5_DED_IRQ_11 78 +#define GPIO_S5_DED_IRQ_12 79 +#define GPIO_S5_DED_IRQ_13 80 +#define GPIO_S5_DED_IRQ_14 81 +#define GPIO_S5_DED_IRQ_15 82 +/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */ +#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot +#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot +#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot) +#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot) + +/* PIC IRQ settings. */ +#define PIRQ_PIC_IRQ3 0x3 +#define PIRQ_PIC_IRQ4 0x4 +#define PIRQ_PIC_IRQ5 0x5 +#define PIRQ_PIC_IRQ6 0x6 +#define PIRQ_PIC_IRQ7 0x7 +#define PIRQ_PIC_IRQ9 0x9 +#define PIRQ_PIC_IRQ10 0xa +#define PIRQ_PIC_IRQ11 0xb +#define PIRQ_PIC_IRQ12 0xc +#define PIRQ_PIC_IRQ14 0xe +#define PIRQ_PIC_IRQ15 0xf +#define PIRQ_PIC_IRQDISABLE 0x80 +#define PIRQ_PIC_UNKNOWN_UNUSED 0xff + + +/* Overloaded term, but these values determine the per device route. */ +#define PIRQA 0 +#define PIRQB 1 +#define PIRQC 2 +#define PIRQD 3 +#define PIRQE 4 +#define PIRQF 5 +#define PIRQG 6 +#define PIRQH 7 + +/* These registers live behind the ILB_BASE_ADDRESS */ +#define ACTL 0x00 +# define SCIS_MASK 0x07 +# define SCIS_IRQ9 0x00 +# define SCIS_IRQ10 0x01 +# define SCIS_IRQ11 0x02 +# define SCIS_IRQ20 0x04 +# define SCIS_IRQ21 0x05 +# define SCIS_IRQ22 0x06 +# define SCIS_IRQ23 0x07 + +/* In each mainboard directory there should exist a header file irqroute.h that + * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which + * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */ + +#if !defined(__ASSEMBLER__) && !defined(__ACPI__) +#include <stdint.h> + +#define NUM_OF_PCI_DEVS 32 +#define NUM_PIRQS 8 + +struct rangeley_irq_route { + /* Per device configuration. */ + uint16_t pcidev[NUM_OF_PCI_DEVS]; + /* Route path for each internal PIRQx in PIC mode. */ + uint8_t pic[NUM_PIRQS]; +}; + +extern const struct rangeley_irq_route global_rangeley_irq_route; + +#define DEFINE_IRQ_ROUTES \ + const struct rangeley_irq_route global_rangeley_irq_route = { \ + .pcidev = { PCI_DEV_PIRQ_ROUTES, }, \ + .pic = { PIRQ_PIC_ROUTES, }, \ + } + +#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \ + [dev_] = ((PIRQ ## d_) << 12) | ((PIRQ ## c_) << 8) | \ + ((PIRQ ## b_) << 4) | ((PIRQ ## a_) << 0) + +#define PIRQ_PIC(pirq_, pic_irq_) \ + [PIRQ ## pirq_] = PIRQ_PIC_IRQ ## pic_irq_ + +#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */ + +#endif /* _RANGELEY_IRQ_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/lpc.c b/src/southbridge/intel/fsp_rangeley/lpc.c new file mode 100644 index 0000000000..8576b613cd --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/lpc.c @@ -0,0 +1,451 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <elog.h> +#include "soc.h" +#include "irq.h" + +#define NMI_OFF 0 + +#define ENABLE_ACPI_MODE_IN_COREBOOT 0 +#define TEST_SMM_FLASH_LOCKDOWN 0 + +typedef struct southbridge_intel_fsp_rangeley_config config_t; + +static void soc_enable_apic(struct device *dev) +{ + int i; + u32 reg32; + volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); + volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); + u32 ilb_base = pci_read_config32(dev, IBASE) & ~0x0f; + + /* + * Enable ACPI I/O and power management. + * Set SCI IRQ to IRQ9 + */ + write32(ilb_base + ILB_OIC, 0x100); /* AEN */ + reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */ + write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */ + + *ioapic_index = 0; + *ioapic_data = (1 << 25); + + /* affirm full set of redirection table entries ("write once") */ + *ioapic_index = 1; + reg32 = *ioapic_data; + *ioapic_index = 1; + *ioapic_data = reg32; + + *ioapic_index = 0; + reg32 = *ioapic_data; + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + if (reg32 != (1 << 25)) + die("APIC Error\n"); + + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); + for (i=0; i<3; i++) { + *ioapic_index = i; + printk(BIOS_SPEW, " reg 0x%04x:", i); + reg32 = *ioapic_data; + printk(BIOS_SPEW, " 0x%08x\n", reg32); + } + + *ioapic_index = 3; /* Select Boot Configuration register. */ + *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ +} + +static void soc_enable_serial_irqs(struct device *dev) +{ + u32 ibase; + + ibase = pci_read_config32(dev, IBASE) & ~0xF; + + /* Set packet length and toggle silent mode bit for one frame. */ + write8(ibase + ILB_SERIRQ_CNTL, (1 << 7)); + +#if !CONFIG_SERIRQ_CONTINUOUS_MODE + write8(ibase + ILB_SERIRQ_CNTL, 0); +#endif +} + +/* + * Write PCI config space IRQ assignments. PCI devices have the INT_LINE + * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing + * information to operating systems and drivers. The INT_PIN register is + * generally read only and reports which interrupt pin A - D it uses. The + * INT_LINE register is configurable and reports which IRQ (generally the + * PIC IRQs 1 - 15) it will use. This needs to take interrupt pin swizzling + * on devices that are downstream on a PCI bridge into account. + * + * This function will loop through all enabled PCI devices and program the + * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it + * uses. It then configures each interrupt in the pic to be level triggered. + */ +static void write_pci_config_irqs(void) +{ + device_t irq_dev; + device_t targ_dev; + uint8_t int_line = 0; + uint8_t original_int_pin = 0; + uint8_t new_int_pin = 0; + uint16_t current_bdf = 0; + uint16_t parent_bdf = 0; + uint8_t pirq = 0; + uint8_t device_num = 0; + const struct rangeley_irq_route *ir = &global_rangeley_irq_route; + + if (ir == NULL) { + printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because" + " 'global_rangeley_irq_route' structure does not exist\n"); + return; + } + + /* + * Loop through all enabled devices and program their + * INT_LINE, INT_PIN registers from values taken from + * the Interrupt Route registers in the ILB + */ + printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n"); + for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + + if ((irq_dev->path.type != DEVICE_PATH_PCI) || + (!irq_dev->enabled)) + continue; + + current_bdf = irq_dev->path.pci.devfn | + irq_dev->bus->secondary << 8; + + /* + * Step 1: Get the INT_PIN and device structure to look for + * in the pirq_data table defined in the mainboard directory. + */ + targ_dev = NULL; + new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev); + if (targ_dev == NULL || new_int_pin < 1) + continue; + + /* Get the original INT_PIN for record keeping */ + original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + parent_bdf = targ_dev->path.pci.devfn + | targ_dev->bus->secondary << 8; + device_num = PCI_SLOT(parent_bdf); + + if (ir->pcidev[device_num] == 0) { + printk(BIOS_WARNING, + "Warning: PCI Device %d does not have an IRQ entry, skipping it\n", + device_num); + continue; + } + + /* Find the PIRQ that is attached to the INT_PIN this device uses */ + pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF; + + /* Get the INT_LINE this device/function will use */ + int_line = ir->pic[pirq]; + + if (int_line != PIRQ_PIC_IRQDISABLE) { + /* Set this IRQ to level triggered since it is used by a PCI device */ + i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); + /* Set the Interrupt Line register in PCI config space */ + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } else { + /* Set the Interrupt line register as "unknown or unused" */ + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, + PIRQ_PIC_UNKNOWN_UNUSED); + } + + printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n", + original_int_pin, pin_to_str(original_int_pin)); + if (parent_bdf != current_bdf) + printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n", + new_int_pin, pin_to_str(new_int_pin)); + printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n" + "\tINT_LINE\t: 0x%X (IRQ %d)\n", + 'A' + pirq, int_line, int_line); + } + printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n"); +} + +static void soc_pirq_init(device_t dev) +{ + int i, j; + int pirq; + const u32 ibase = pci_read_config32(dev, IBASE) & ~0xF; + const unsigned long pr_base = ibase + 0x08; + const unsigned long ir_base = ibase + 0x20; + const unsigned long actl = ibase; + const struct rangeley_irq_route *ir = &global_rangeley_irq_route; + + /* Set up the PIRQ PIC routing based on static config. */ + printk(BIOS_SPEW, "Start writing IRQ assignments\n" + "PIRQ\tA \tB \tC \tD \tE \tF \tG \tH\n" + "IRQ "); + for (i = 0; i < NUM_PIRQS; i++) { + write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]); + printk(BIOS_SPEW, "\t%d", ir->pic[i]); + } + printk(BIOS_SPEW, "\n\n"); + + /* Set up the per device PIRQ routing based on static config. */ + printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n" + "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n"); + for (i = 0; i < NUM_OF_PCI_DEVS; i++) { + write16(ir_base + i*sizeof(ir->pcidev[i]), ir->pcidev[i]); + + /* If the entry is more than just 0, print it out */ + if(ir->pcidev[i]) { + printk(BIOS_SPEW, " %d: ", i); + for (j = 0; j < 4; j++) { + pirq = (ir->pcidev[i] >> (j * 4)) & 0xF; + printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]); + } + printk(BIOS_SPEW, "\n"); + } + } + + /* Route SCI to IRQ9 */ + write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9); + printk(BIOS_SPEW, "Finished writing IRQ assignments\n"); + + /* Write IRQ assignments to PCI config space */ + write_pci_config_irqs(); +} + +static void soc_power_options(device_t dev) +{ + u8 reg8; + u16 pmbase; + u32 reg32; + + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + int nmi_option; + + /* Set up NMI on errors. */ + reg8 = inb(0x61); + reg8 &= 0x0f; /* Higher Nibble must be 0 */ + reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ + // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ + reg8 |= (1 << 2); /* PCI SERR# Disable for now */ + outb(reg8, 0x61); + + reg8 = inb(0x70); + nmi_option = NMI_OFF; + get_option(&nmi_option, "nmi"); + if (nmi_option) { + printk(BIOS_INFO, "NMI sources enabled.\n"); + reg8 &= ~(1 << 7); /* Set NMI. */ + } else { + printk(BIOS_INFO, "NMI sources disabled.\n"); + reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ + } + outb(reg8, 0x70); + + pmbase = pci_read_config16(dev, ABASE) & ~0xf; + + outl(config->gpe0_en, pmbase + GPE0_EN); + outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); + + /* Set up power management block and determine sleep mode */ + reg32 = inl(pmbase + PM1_CNT); // PM1_CNT + reg32 &= ~(7 << 10); // SLP_TYP + reg32 |= (1 << 0); // SCI_EN + outl(reg32, pmbase + PM1_CNT); +} + +/* Disable the HPET, Clear the counter, and re-enable it. */ +static void enable_hpet(void) +{ + write8(HPET_GCFG, 0x00); + write32(HPET_MCV, 0x00000000); + write32(HPET_MCV + 0x04, 0x00000000); + write8(HPET_GCFG, 0x01); +} + +static void soc_disable_smm_only_flashing(struct device *dev) +{ + u8 reg8; + + printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 &= ~(1 << 5); + pci_write_config8(dev, 0xdc, reg8); +} + +static void lpc_init(struct device *dev) +{ + printk(BIOS_DEBUG, "soc: lpc_init\n"); + + /* Set the value for PCI command register. */ + pci_write_config16(dev, PCI_COMMAND, 0x000f); + + /* IO APIC initialization. */ + soc_enable_apic(dev); + + soc_enable_serial_irqs(dev); + + /* Setup the PIRQ. */ + soc_pirq_init(dev); + + /* Setup power options. */ + soc_power_options(dev); + + /* Initialize power management */ + switch (soc_silicon_type()) { + case SOC_TYPE_RANGELEY: + break; + default: + printk(BIOS_DEBUG, "Unknown Chipset: 0x%04x\n", dev->device); + } + + /* Initialize ISA DMA. */ + isa_dma_init(); + + /* Initialize the High Precision Event Timers, if present. */ + enable_hpet(); + + setup_i8259(); + + /* Interrupt 9 should be level triggered (SCI) */ + i8259_configure_irq_trigger(9, 1); + + soc_disable_smm_only_flashing(dev); +} + +static void soc_lpc_read_resources(device_t dev) +{ + struct resource *res; + config_t *config = dev->chip_info; + u8 io_index = 0; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* Set SOC IO decode ranges if required.*/ + if ((config->gen1_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen1_dec & 0xFFFC; + res->size = (config->gen1_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen2_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen2_dec & 0xFFFC; + res->size = (config->gen2_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen3_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen3_dec & 0xFFFC; + res->size = (config->gen3_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen4_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen4_dec & 0xFFFC; + res->size = (config->gen4_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } +} + +static void soc_lpc_enable_resources(device_t dev) +{ + return pci_dev_enable_resources(dev); +} + +static void soc_lpc_enable(device_t dev) +{ + soc_enable(dev); +} + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations device_ops = { + .read_resources = soc_lpc_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = soc_lpc_enable_resources, + .init = lpc_init, + .enable = soc_lpc_enable, + .scan_bus = scan_static_bus, + .ops_pci = &pci_ops, +}; + +/* IDs for LPC device of Intel 89xx Series Chipset */ +static const unsigned short pci_device_ids[] = { 0x1F38, 0x1F39, 0x1F3A, 0x1F3B, + 0 }; + +static const struct pci_driver soc_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/southbridge/intel/fsp_rangeley/nvs.h b/src/southbridge/intel/fsp_rangeley/nvs.h new file mode 100644 index 0000000000..dce23e0d41 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/nvs.h @@ -0,0 +1,155 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +typedef struct { + /* Miscellaneous */ + u16 osys; /* 0x00 - Operating System */ + u8 smif; /* 0x02 - SMI function call ("TRAP") */ + u8 prm0; /* 0x03 - SMI function call parameter */ + u8 prm1; /* 0x04 - SMI function call parameter */ + u8 scif; /* 0x05 - SCI function call (via _L00) */ + u8 prm2; /* 0x06 - SCI function call parameter */ + u8 prm3; /* 0x07 - SCI function call parameter */ + u8 lckf; /* 0x08 - Global Lock function for EC */ + u8 prm4; /* 0x09 - Lock function parameter */ + u8 prm5; /* 0x0a - Lock function parameter */ + u32 p80d; /* 0x0b - Debug port (IO 0x80) value */ + u8 lids; /* 0x0f - LID state (open = 1) */ + u8 pwrs; /* 0x10 - Power state (AC = 1) */ + /* Thermal policy */ + u8 tlvl; /* 0x11 - Throttle Level Limit */ + u8 flvl; /* 0x12 - Current FAN Level */ + u8 tcrt; /* 0x13 - Critical Threshold */ + u8 tpsv; /* 0x14 - Passive Threshold */ + u8 tmax; /* 0x15 - CPU Tj_max */ + u8 f0of; /* 0x16 - FAN 0 OFF Threshold */ + u8 f0on; /* 0x17 - FAN 0 ON Threshold */ + u8 f0pw; /* 0x18 - FAN 0 PWM value */ + u8 f1of; /* 0x19 - FAN 1 OFF Threshold */ + u8 f1on; /* 0x1a - FAN 1 ON Threshold */ + u8 f1pw; /* 0x1b - FAN 1 PWM value */ + u8 f2of; /* 0x1c - FAN 2 OFF Threshold */ + u8 f2on; /* 0x1d - FAN 2 ON Threshold */ + u8 f2pw; /* 0x1e - FAN 2 PWM value */ + u8 f3of; /* 0x1f - FAN 3 OFF Threshold */ + u8 f3on; /* 0x20 - FAN 3 ON Threshold */ + u8 f3pw; /* 0x21 - FAN 3 PWM value */ + u8 f4of; /* 0x22 - FAN 4 OFF Threshold */ + u8 f4on; /* 0x23 - FAN 4 ON Threshold */ + u8 f4pw; /* 0x24 - FAN 4 PWM value */ + u8 tmps; /* 0x25 - Temperature Sensor ID */ + u8 rsvd3[2]; + /* Processor Identification */ + u8 apic; /* 0x28 - APIC enabled */ + u8 mpen; /* 0x29 - MP capable/enabled */ + u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */ + u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */ + u8 ppcm; /* 0x2c - Max. PPC state */ + u8 pcnt; /* 0x2d - Processor Count */ + u8 rsvd4[4]; + /* Super I/O & CMOS config */ + u8 natp; /* 0x32 - SIO type */ + u8 s5u0; /* 0x33 - Enable USB0 in S5 */ + u8 s5u1; /* 0x34 - Enable USB1 in S5 */ + u8 s3u0; /* 0x35 - Enable USB0 in S3 */ + u8 s3u1; /* 0x36 - Enable USB1 in S3 */ + u8 s33g; /* 0x37 - Enable S3 in 3G */ + u32 cmem; /* 0x38 - CBMEM TOC */ + /* Integrated Graphics Device */ + u8 igds; /* 0x3c - IGD state */ + u8 tlst; /* 0x3d - Display Toggle List Pointer */ + u8 cadl; /* 0x3e - currently attached devices */ + u8 padl; /* 0x3f - previously attached devices */ + u16 cste; /* 0x40 - current display state */ + u16 nste; /* 0x42 - next display state */ + u16 sste; /* 0x44 - set display state */ + u8 ndid; /* 0x46 - number of device ids */ + u32 did[5]; /* 0x47 - 5b device id 1..5 */ + u8 rsvd5[0x9]; + /* Backlight Control */ + u8 blcs; /* 0x64 - Backlight Control possible */ + u8 brtl; + u8 odds; + u8 rsvd6[0x7]; + /* Ambient Light Sensors*/ + u8 alse; /* 0x6e - ALS enable */ + u8 alaf; + u8 llow; + u8 lhih; + u8 rsvd7[0x6]; + /* Extended Mobile Access */ + u8 emae; /* 0x78 - EMA enable */ + u16 emap; /* 0x79 - EMA pointer */ + u16 emal; /* 0x7a - EMA Length */ + u8 rsvd8[0x5]; + /* MEF */ + u8 mefe; /* 0x82 - MEF enable */ + u8 rsvd9[0x9]; + /* TPM support */ + u8 tpmp; /* 0x8c - TPM */ + u8 tpme; + u8 rsvd10[8]; + /* SATA */ + u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */ + u8 gtf1[7]; + u8 gtf2[7]; + u8 idem; + u8 idet; + u8 rsvd11[7]; + /* IGD OpRegion (not implemented yet) */ + u32 aslb; /* 0xb4 - IGD OpRegion Base Address */ + u8 ibtt; /* 0xb8 - IGD boot type */ + u8 ipat; /* 0xb9 - IGD panel type */ + u8 itvf; /* 0xba - IGD TV format */ + u8 itvm; /* 0xbb - IGD TV minor format */ + u8 ipsc; /* 0xbc - IGD Panel Scaling */ + u8 iblc; /* 0xbd - IGD BLC configuration */ + u8 ibia; /* 0xbe - IGD BIA configuration */ + u8 issc; /* 0xbf - IGD SSC configuration */ + u8 i409; /* 0xc0 - IGD 0409 modified settings */ + u8 i509; /* 0xc1 - IGD 0509 modified settings */ + u8 i609; /* 0xc2 - IGD 0609 modified settings */ + u8 i709; /* 0xc3 - IGD 0709 modified settings */ + u8 idmm; /* 0xc4 - IGD Power Conservation */ + u8 idms; /* 0xc5 - IGD DVMT memory size */ + u8 if1e; /* 0xc6 - IGD Function 1 Enable */ + u8 hvco; /* 0xc7 - IGD HPLL VCO */ + u32 nxd[8]; /* 0xc8 - IGD next state DIDx for _DGS */ + u8 isci; /* 0xe8 - IGD SMI/SCI mode (0: SCI) */ + u8 pavp; /* 0xe9 - IGD PAVP data */ + u8 rsvd12; /* 0xea - rsvd */ + u8 oscc; /* 0xeb - PCIe OSC control */ + u8 npce; /* 0xec - native pcie support */ + u8 plfl; /* 0xed - platform flavor */ + u8 brev; /* 0xee - board revision */ + u8 dpbm; /* 0xef - digital port b mode */ + u8 dpcm; /* 0xf0 - digital port c mode */ + u8 dpdm; /* 0xf1 - digital port c mode */ + u8 alfp; /* 0xf2 - active lfp */ + u8 imon; /* 0xf3 - current graphics turbo imon value */ + u8 mmio; /* 0xf4 - 64bit mmio support */ + u8 rsvd13[11]; /* 0xf5 - rsvd */ + +} __attribute__((packed)) global_nvs_t; + +#ifdef __SMM__ +/* Used in SMM to find the ACPI GNVS address */ +global_nvs_t *smm_get_gnvs(void); +#endif diff --git a/src/southbridge/intel/fsp_rangeley/pci_devs.h b/src/southbridge/intel/fsp_rangeley/pci_devs.h new file mode 100644 index 0000000000..e10425bc8a --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/pci_devs.h @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _RANGELEY_PCI_DEVS_H_ +#define _RANGELEY_PCI_DEVS_H_ + +#define BUS0 0 + +/* All these devices live on bus 0 with the associated device and function */ +#define DEV_FUNC(x,y) ((x<<3) | y) + +/* Host Bridge */ +#define SOC_DEV 0x0 +#define SOC_FUNC 0 +# define SOC_DEVID 0x1f08 +# define SOC_DEV_FUNC DEV_FUNC(SOC_DEV,SOC_FUNC) + +/* PCIE Port 1 */ +#define PCIE_PORT1_DEV 0x1 +#define PCIE_PORT1_FUNC 0 +# define PCIE_PORT1_DEVID 0x1f10 +# define PCIE_PORT1_DEV_FUNC DEV_FUNC(PCIE_PORT1_DEV,PCIE_PORT1_FUNC) + +/* PCIE Port 2 */ +#define PCIE_PORT2_DEV 0x2 +#define PCIE_PORT2_FUNC 0 +# define PCIE_PORT2_DEVID 0x1f11 +# define PCIE_PORT2_DEV_FUNC DEV_FUNC(PCIE_PORT2_DEV,PCIE_PORT2_FUNC) + +/* PCIE Port 3 */ +#define PCIE_PORT3_DEV 0x3 +#define PCIE_PORT3_FUNC 0 +# define PCIE_PORT3_DEVID 0x1f12 +# define PCIE_PORT3_DEV_FUNC DEV_FUNC(PCIE_PORT3_DEV,PCIE_PORT3_FUNC) + +/* PCIE Port 4 */ +#define PCIE_PORT4_DEV 0x4 +#define PCIE_PORT4_FUNC 0 +# define PCIE_PORT4_DEVID 0x1f13 +# define PCIE_PORT4_DEV_FUNC DEV_FUNC(PCIE_PORT4_DEV,PCIE_PORT4_FUNC) + +/* Host Bridge, Fabric, and RAS Registers */ +#define HOST_BRIDGE_DEV 0xe +#define HOST_BRIDGE_FUNC 0 +# define HOST_BRIDGE_DEVID 0x1f14 +# define HOST_BRIDGE_DEV_FUNC DEV_FUNC(HOST_BRIDGE_DEV,HOST_BRIDGE_FUNC) + +/* Root Complex Event Collector (RCEC) */ +#define RCEC_DEV 0xf +#define RCEC_FUNC 0 +# define RCEC_DEVID 0x1f16 +# define RCEC_DEV_FUNC DEV_FUNC(RCEC_DEV,RCEC_FUNC) + +/* SMBus 2.0 1 */ +#define SMBUS1_DEV 0x13 +#define SMBUS1_FUNC 0 +# define SMBUS1_DEVID 0x1f15 +# define SMBUS1_DEV_FUNC DEV_FUNC(SMBUS1_DEV,SMBUS1_FUNC) + +/* Gigabit Ethernet (GbE) */ +#define GBE_DEV 0x14 +#define GBE_DEVID 0x1f41 +#define GBE1_DEV GBE_DEV +#define GBE1_FUNC 0 +# define GBE1_DEVID GBE_DEVID +# define GBE1_DEV_FUNC DEV_FUNC(GBE1_DEV,GBE1_FUNC) +#define GBE2_DEV GBE_DEV +#define GBE2_FUNC 1 +# define GBE2_DEVID GBE_DEVID +# define GBE2_DEV_FUNC DEV_FUNC(GBE2_DEV,GBE2_FUNC) +#define GBE3_DEV GBE_DEV +#define GBE3_FUNC 2 +# define GBE3_DEVID GBE_DEVID +# define GBE3_DEV_FUNC DEV_FUNC(GBE3_DEV,GBE3_FUNC) +#define GBE4_DEV GBE_DEV +#define GBE4_FUNC 3 +# define GBE4_DEVID GBE_DEVID +# define GBE4_DEV_FUNC DEV_FUNC(GBE4_DEV,GBE4_FUNC) + +/* USB 2.0 */ +#define USB2_DEV 0x16 +#define USB2_FUNC 0 +# define USB2_DEVID 0x1f2c +# define USB2_DEV_FUNC DEV_FUNC(USB2_DEV,USB2_FUNC) + +/* SATA Gen 2 */ +#define SATA2_DEV 0x17 +#define SATA2_FUNC 0 +# define SATA2_DEVID 0x1f22 +# define SATA2_DEV_FUNC DEV_FUNC(SATA2_DEV,SATA2_FUNC) + +/* SATA Gen 3 */ +#define SATA3_DEV 0x18 +#define SATA3_FUNC 0 +# define SATA3_DEVID 0x1f32 +# define SATA3_DEV_FUNC DEV_FUNC(SATA3_DEV,SATA3_FUNC) + +/* Platform Control Unit (PCU) */ +#define PCU_DEV 0x1f + +/* Low Pin Count (LPC/ISA) */ +#define LPC_DEV PCU_DEV +#define LPC_FUNC 0 +# define LPC_DEVID 0x1f38 +# define LPC_DEV_FUNC DEV_FUNC(LPC_DEV,LPC_FUNC) +# define LPC_BDF PCI_DEV(BUS0, LPC_DEV, LPC_FUNC) + +/* SMBus 2.0 0 */ +#define SMBUS0_DEV PCU_DEV +#define SMBUS0_FUNC 3 +# define SMBUS0_DEVID 0x1f3c +# define SMBUS0_DEV_FUNC DEV_FUNC(SMBUS0_DEV,SMBUS0_FUNC) + +/* Intel QuickAssist Integrated Accelerator (IQIA) */ +#define IQAT_DEV 0xb +#define IQAT_FUNC 0 +# define IQAT_DEVID 0x1f18 +# define IQAT_DEV_FUNC DEV_FUNC(IQAT_DEV,IQAT_FUNC) + +#endif /* _RANGELEY_PCI_DEVS_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/reset.c b/src/southbridge/intel/fsp_rangeley/reset.c new file mode 100644 index 0000000000..b6a0f3d9bf --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/reset.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/hlt.h> +#include <reset.h> + +void soft_reset(void) +{ + hard_reset(); +} + +void hard_reset(void) +{ + outb(0x02, 0xcf9); + outb(0x06, 0xcf9); +} diff --git a/src/southbridge/intel/fsp_rangeley/romstage.c b/src/southbridge/intel/fsp_rangeley/romstage.c new file mode 100644 index 0000000000..fd8b3b20b0 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/romstage.c @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <cbmem.h> +#include <console/console.h> +#include <drivers/intel/fsp/fsp_util.h> +#include "northbridge/intel/fsp_rangeley/northbridge.h" +#include "southbridge/intel/fsp_rangeley/soc.h" +#include "southbridge/intel/fsp_rangeley/gpio.h" +#include "southbridge/intel/fsp_rangeley/romstage.h" +#include <arch/cpu.h> +#include <arch/stages.h> +#include <cpu/x86/msr.h> +#include "gpio.h" + +void main(FSP_INFO_HEADER *fsp_info_header) +{ + uint32_t fd_mask = 0; + uint32_t func_dis = DEFAULT_PBASE + PBASE_FUNC_DIS; + + /* + * Do not use the Serial Console before it is setup. + * This causes the I/O to clog and a side effect is + * that the reset button stops functioning. So + * instead just use outb so it doesn't output to the + * console when CONFIG_CONSOLE_POST. + */ + outb(0x40, 0x80); + + /* Rangeley UART POR state is enabled */ + console_init(); + post_code(0x41); + + /* Enable GPIOs BAR */ + pci_write_config32(SOC_LPC_DEV, GBASE, DEFAULT_GPIOBASE|0x02); + + early_mainboard_romstage_entry(); + + post_code(0x42); + rangeley_sb_early_initialization(); + + post_code(0x46); + /* Program any required function disables */ + get_func_disables(&fd_mask); + + if (fd_mask != 0) { + write32(func_dis, read32(func_dis) | fd_mask); + /* Ensure posted write hits. */ + read32(func_dis); + } + + /* + * Call early init to initialize memory and chipset. This function returns + * to the romstage_main_continue function with a pointer to the HOB + * structure. + */ + post_code(0x47); + printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); + fsp_early_init(fsp_info_header); + die("Uh Oh! fsp_early_init should not return here.\n"); +} + +/******************************************************************************* + * The FSP early_init function returns to this function. + * Memory is setup and the stack is set by the FSP. + */ +void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr) { + int cbmem_was_initted; + void *cbmem_hob_ptr; + +#if IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS) + tsc_t after_initram_time = rdtsc(); + tsc_t base_time; + base_time.hi = 0; + base_time.lo = 0; +#endif + post_code(0x48); + printk(BIOS_DEBUG, "%s status: %x hob_list_ptr: %x\n", + __func__, (u32) status, (u32) hob_list_ptr); + +#if IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) + /* FSP reconfigures USB, so reinit it to have debug */ + usbdebug_init(); +#endif /* IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) */ + + printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); + + post_code(0x4b); + late_mainboard_romstage_entry(); + + post_code(0x4c); + + /* Decode E0000 and F0000 segment to DRAM */ + sideband_write(B_UNIT, BMISC, sideband_read(B_UNIT, BMISC) | (1 << 1) | (1 << 0)); + + quick_ram_check(); + post_code(0x4d); + + cbmem_was_initted = !cbmem_recovery(0); + + /* Save the HOB pointer in CBMEM to be used in ramstage*/ + cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*hob_list_ptr)); + *(u32*)cbmem_hob_ptr = (u32)hob_list_ptr; + post_code(0x4e); + +#if IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS) + timestamp_init(base_time); + timestamp_reinit(); + timestamp_add(TS_AFTER_INITRAM, after_initram_time); + timestamp_add_now(TS_END_ROMSTAGE); +#endif + +#if IS_ENABLED(CONFIG_CONSOLE_CBMEM) + printk(BIOS_DEBUG, "cbmemc_reinit\n"); + cbmemc_reinit(); +#endif + post_code(0x4f); + + /* Load the ramstage. */ + copy_and_run(); + while (1); +} diff --git a/src/southbridge/intel/fsp_rangeley/romstage.h b/src/southbridge/intel/fsp_rangeley/romstage.h new file mode 100644 index 0000000000..e09486221a --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/romstage.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _RANGELEY_ROMSTAGE_H_ +#define _RANGELEY_ROMSTAGE_H_ + +#if !defined(__PRE_RAM__) +#error "Don't include romstage.h from a ramstage compilation unit!" +#endif + +#include <stdint.h> +#include <arch/cpu.h> + +#include <fsptypes.h> + +void early_mainboard_romstage_entry(void); +void late_mainboard_romstage_entry(void); +void get_func_disables(uint32_t *mask); + +void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr); + +#endif /* _RANGELEY_ROMSTAGE_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/sata.c b/src/southbridge/intel/fsp_rangeley/sata.c new file mode 100644 index 0000000000..f672e4c428 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/sata.c @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "soc.h" + +typedef struct southbridge_intel_fsp_rangeley_config config_t; + +static void sata_init(struct device *dev) +{ + u32 reg32; + u16 reg16; + u32 abar; + + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + printk(BIOS_DEBUG, "SATA: Initializing...\n"); + + if (config == NULL) { + printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); + return; + } + + /* SATA configuration is handled by the FSP */ + + /* Enable BARs */ + pci_write_config16(dev, PCI_COMMAND, 0x0007); + + if (config->ide_legacy_combined) { + printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n"); + + /* Set the controller mode */ + reg16 = pci_read_config16(dev, SATA_MAP); + reg16 &= ~(3 << 6); + pci_write_config16(dev, SATA_MAP, reg16); + + /* No AHCI: clear AHCI base */ + pci_write_config32(dev, 0x24, 0x00000000); + + /* And without AHCI BAR no memory decoding */ + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 &= ~PCI_COMMAND_MEMORY; + pci_write_config16(dev, PCI_COMMAND, reg16); + } else if(config->sata_ahci) { + printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); + + /* Set the controller mode */ + reg16 = pci_read_config16(dev, SATA_MAP); + reg16 &= ~(3 << 6); + reg16 |= (1 << 6); + pci_write_config16(dev, SATA_MAP, reg16); + + /* Initialize AHCI memory-mapped space */ + abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); + printk(BIOS_DEBUG, "ABAR: %08X\n", abar); + + /* Enable AHCI Mode */ + reg32 = read32(abar + 0x04); + reg32 |= (1 << 31); + write32(abar + 0x04, reg32); + } else { + printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); + } + + /* Spin up the drives as early as possible via the Port Enable */ + reg16 = pci_read_config16(dev, SATA_PSC); + reg16 &= ~0x3f; + pci_write_config16(dev, SATA_PSC, reg16); + reg16 = pci_read_config16(dev, SATA_PSC); + reg16 |= 0x3f; + pci_write_config16(dev, SATA_PSC, reg16); + +} + +static void sata_enable(device_t dev) +{ +} + +static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations sata_pci_ops = { + .set_subsystem = sata_set_subsystem, +}; + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .enable = sata_enable, + .scan_bus = 0, + .ops_pci = &sata_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x1f20, 0x1f21, 0x1f22, 0x1f23, + 0x1f30, 0x1f31, 0x1f32, 0x1f33, + 0 }; + +static const struct pci_driver soc_sata __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/southbridge/intel/fsp_rangeley/smbus.c b/src/southbridge/intel/fsp_rangeley/smbus.c new file mode 100644 index 0000000000..83158cc434 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/smbus.c @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/path.h> +#include <device/smbus.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include "soc.h" +#include "smbus.h" + +static int lsmbus_read_byte(device_t dev, u8 address) +{ + u16 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, 0x20); + + return do_smbus_read_byte(res->base, device, address); +} + +static struct smbus_bus_operations lops_smbus_bus = { + .read_byte = lsmbus_read_byte, +}; + +static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations smbus_pci_ops = { + .set_subsystem = smbus_set_subsystem, +}; + +static void rangeley_smbus_read_resources(device_t dev) +{ + struct resource *res; + + /* + * The SMBus has two BARS. + * BAR0 - MMIO, not used at boot time + * BAR4 - IO, Used to talk to the SMBUS during boot, so we maintain + * the default setting in the resource allocator. + */ + + res = pci_get_resource(dev, PCI_BASE_ADDRESS_0); + + res = new_resource(dev, PCI_BASE_ADDRESS_4); + res->base = SMBUS_IO_BASE; + res->size = 32; + res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; + +} + +static struct device_operations smbus_ops = { + .read_resources = rangeley_smbus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = 0, + .scan_bus = scan_static_bus, + .ops_smbus_bus = &lops_smbus_bus, + .ops_pci = &smbus_pci_ops, +}; + +static const struct pci_driver rangeley_smbus __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1F3C, +}; diff --git a/src/southbridge/intel/fsp_rangeley/smbus.h b/src/southbridge/intel/fsp_rangeley/smbus.h new file mode 100644 index 0000000000..34d2a8c6be --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/smbus.h @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com> + * Copyright (C) 2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/smbus_def.h> +#include "soc.h" + +static void smbus_delay(void) +{ + inb(0x80); +} + +static int smbus_wait_until_ready(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while (byte & 1); + return loops ? 0 : -1; +} + +static int smbus_wait_until_done(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0); + return loops ? 0 : -1; +} + +static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) +{ + unsigned char global_status_register; + unsigned char byte; + + if (smbus_wait_until_ready(smbus_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(0, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + byte = inb(smbus_base + SMBHSTDAT0); + if (global_status_register != (1 << 1)) { + return SMBUS_ERROR; + } + return byte; +} diff --git a/src/southbridge/intel/fsp_rangeley/soc.c b/src/southbridge/intel/fsp_rangeley/soc.c new file mode 100644 index 0000000000..fa03ccdf2a --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/soc.c @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include "soc.h" + +static int soc_revision_id = -1; +static int soc_type = -1; + +int soc_silicon_revision(void) +{ + if (soc_revision_id < 0) + soc_revision_id = pci_read_config8( + dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PCI_REVISION_ID); + return soc_revision_id; +} + +int soc_silicon_type(void) +{ + if (soc_type < 0) + soc_type = pci_read_config8( + dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PCI_DEVICE_ID + 1); + return soc_type; +} + +int soc_silicon_supported(int type, int rev) +{ + int cur_type = soc_silicon_type(); + int cur_rev = soc_silicon_revision(); + + switch (type) { + case SOC_TYPE_RANGELEY: + if (cur_type == SOC_TYPE_RANGELEY && cur_rev >= rev) + return 1; + } + + return 0; +} + +/* Set bit in Function Disble register to hide this device */ +static void soc_hide_devfn(unsigned devfn) +{ +/* TODO Function Disable. */ +} + + + + +void soc_enable(device_t dev) +{ + u32 reg32; + + if (!dev->enabled) { + printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); + + /* Ensure memory, io, and bus master are all disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Hide this device if possible */ + soc_hide_devfn(dev->path.pci.devfn); + } else { + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); + } +} + +struct chip_operations southbridge_intel_fsp_rangeley_ops = { + CHIP_NAME("Intel Rangeley Southbridge") + .enable_dev = soc_enable, +}; diff --git a/src/southbridge/intel/fsp_rangeley/soc.h b/src/southbridge/intel/fsp_rangeley/soc.h new file mode 100644 index 0000000000..6db4b11da3 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/soc.h @@ -0,0 +1,448 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SOUTHBRIDGE_INTEL_RANGELEY_SOC_H +#define SOUTHBRIDGE_INTEL_RANGELEY_SOC_H + +/* SOC types */ +#define SOC_TYPE_RANGELEY 0x1F + +/* + * It does not matter where we put the SMBus I/O base, as long as we + * keep it consistent and don't interfere with other devices. Stage2 + * will relocate this anyways. + * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE + * again. But handling static BARs is a generic problem that should be + * solved in the device allocator. + */ + +/* Southbridge internal device IO BARs (Set to match FSP settings) */ +#define SMBUS_IO_BASE 0xefa0 +#define SMBUS_SLAVE_ADDR 0x24 +#define DEFAULT_GPIOBASE 0x0500 +#define DEFAULT_ABASE 0x0400 + +/* Southbridge internal device MEM BARs (Set to match FSP settings) */ +#define DEFAULT_IBASE 0xfed08000 +#define DEFAULT_PBASE 0xfed03000 +#define DEFAULT_RCBA 0xfed1c000 + +#ifndef __ACPI__ +#define DEBUG_PERIODIC_SMIS 0 + +#if defined (__SMM__) && !defined(__ASSEMBLER__) +void intel_soc_finalize_smm(void); +#endif + +#if !defined(__ASSEMBLER__) && !defined(__ROMCC__) +#if !defined(__PRE_RAM__) && !defined(__SMM__) +#include "chip.h" +int soc_silicon_revision(void); +int soc_silicon_type(void); +int soc_silicon_supported(int type, int rev); +void soc_enable(device_t dev); + +#include <arch/acpi.h> +void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt); + +#if CONFIG_ELOG +void soc_log_state(void); +#endif +#else +void enable_smbus(void); +void enable_usb_bar(void); +int smbus_read_byte(unsigned device, unsigned address); +int early_spi_read(u32 offset, u32 size, u8 *buffer); +void rangeley_sb_early_initialization(void); +#endif +#endif + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 +#define MAINBOARD_POWER_KEEP 2 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +#define SOC_EHCI1_DEV PCI_DEV(0, 0x1d, 0) +#define PCIE_DEV_SLOT0 1 +#define PCIE_DEV_SLOT1 2 +#define PCIE_DEV_SLOT2 3 +#define PCIE_DEV_SLOT3 4 + +/* PCI Configuration Space (D31:F0): LPC */ +#define SOC_LPC_DEV PCI_DEV(0, 0x1f, 0) +#define SOC_LPC_DEVFN 0, PCI_DEVFN(0x1f,0) + + +/* Southbridge IO BARs */ +#define ABASE 0x40 /* IO BAR */ +#define PBASE 0x44 /* MEM BAR */ +#define GBASE 0x48 /* IO BAR */ +#define IOBASE 0x4C /* MEM BAR */ +#define IBASE 0x50 /* MEM BAR */ +#define SBASE 0x54 /* MEM BAR */ +#define MPBASE 0x58 /* MEM BAR */ +#define SET_BAR_ENABLE 0x02 + +/* Rangeley ILB defines */ +#define ILB_ACTL 0 +#define ILB_PIRQA_ROUT 0x8 +#define ILB_PIRQB_ROUT 0x9 +#define ILB_PIRQC_ROUT 0xA +#define ILB_PIRQD_ROUT 0xB +#define ILB_PIRQE_ROUT 0xC +#define ILB_PIRQF_ROUT 0xD +#define ILB_PIRQG_ROUT 0xE +#define ILB_PIRQH_ROUT 0xF +#define ILB_SERIRQ_CNTL 0x10 +#define ILB_IR00 0x20 +#define ILB_IR01 0x22 +#define ILB_IR02 0x24 +#define ILB_IR03 0x26 +#define ILB_IR04 0x28 +#define ILB_IR05 0x2A +#define ILB_IR06 0x2C +#define ILB_IR07 0x2E +#define ILB_IR08 0x30 +#define ILB_IR09 0x32 +#define ILB_IR10 0x34 +#define ILB_IR11 0x36 +#define ILB_IR12 0x38 +#define ILB_IR13 0x3A +#define ILB_IR14 0x3C +#define ILB_IR15 0x3E +#define ILB_IR16 0x40 +#define ILB_IR17 0x42 +#define ILB_IR18 0x44 +#define ILB_IR19 0x46 +#define ILB_IR20 0x48 +#define ILB_IR21 0x4A +#define ILB_IR22 0x4C +#define ILB_IR23 0x4E +#define ILB_IR24 0x50 +#define ILB_IR25 0x52 +#define ILB_IR26 0x54 +#define ILB_IR27 0x56 +#define ILB_IR28 0x58 +#define ILB_IR29 0x5A +#define ILB_IR30 0x5C +#define ILB_IR31 0x5E +#define ILB_OIC 0x60 + +/* PCI Configuration Space (D31:F2/5) */ +#define SOC_SATA_DEV PCI_DEV(0, 0x17, 0) +#define SOC_SATA2_DEV PCI_DEV(0, 0x18, 0) + +#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ +#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ +#define SATA_SP 0xd0 /* Scratchpad */ +#define SATA_MAP 0x90 +#define SATA_PSC 0x92 + +/* SATA IOBP Registers */ +#define SATA_IOBP_SP0G3IR 0xea000151 +#define SATA_IOBP_SP1G3IR 0xea000051 + +/* PCI Configuration Space (D31:F3): SMBus */ +#define SOC_SMBUS_DEV PCI_DEV(0, 0x1f, 3) +#define SMB_BASE 0x20 +#define HOSTC 0x40 +#define SMB_RCV_SLVA 0x09 + +/* HOSTC bits */ +#define I2C_EN (1 << 2) +#define SMB_SMI_EN (1 << 1) +#define HST_EN (1 << 0) + +/* SMBus I/O bits. */ +#define SMBHSTSTAT 0x0 +#define SMBHSTCTL 0x2 +#define SMBHSTCMD 0x3 +#define SMBXMITADD 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBBLKDAT 0x7 +#define SMBTRNSADD 0x9 +#define SMBSLVDATA 0xa +#define SMLINK_PIN_CTL 0xe +#define SMBUS_PIN_CTL 0xf + +#define SMBUS_TIMEOUT (10 * 1000 * 100) + +/* Root Complex Register Block */ +#define RCBA 0xf0 +#define RCBA_ENABLE 0x01 + +#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x)) +#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x)) +#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x)) + +#define RCBA_AND_OR(bits, x, and, or) \ + RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) +#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) +#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) +#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) +#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) + +/* Root Port configuration space hide */ +#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) +/* Get the function number assigned to a Root Port */ +#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) +/* Set the function number for a Root Port */ +#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) +/* Root Port function number mask */ +#define RPFN_FNMASK(port) (7 << ((port) * 4)) + + +#define NOINT 0 +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + +#define DIR_IDR 12 /* Interrupt D Pin Offset */ +#define DIR_ICR 8 /* Interrupt C Pin Offset */ +#define DIR_IBR 4 /* Interrupt B Pin Offset */ +#define DIR_IAR 0 /* Interrupt A Pin Offset */ + +#define PIRQA 0 +#define PIRQB 1 +#define PIRQC 2 +#define PIRQD 3 +#define PIRQE 4 +#define PIRQF 5 +#define PIRQG 6 +#define PIRQH 7 + +/* IO Buffer Programming */ +#define IOBPIRI 0x2330 +#define IOBPD 0x2334 +#define IOBPS 0x2338 +#define IOBPS_RW_BX ((1 << 9)|(1 << 10)) +#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10)) +#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10)) + + + +#define DIR_ROUTE(x,a,b,c,d) \ + RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ + ((b) << DIR_IBR) | ((a) << DIR_IAR)) + +/* PBASE Registers */ +#define PMC_CFG 0x08 +#define SPS (1 << 5) +#define NO_REBOOT (1 << 4) +#define SX_ENT_TO_EN (1 << 3) +#define TIMING_T581 (1 << 0) + +#define GEN_PMCON1 0x20 +# define DISB (1 << 23) +# define MEM_SR (1 << 21) +# define SRS (1 << 20) +# define CTS (1 << 19) +# define MS4V (1 << 18) +# define PWR_FLR (1 << 16) +# define PME_B0_S5_DIS (1 << 15) +# define SUS_PWR_FLR (1 << 14) +# define WOL_EN_OVRD (1 << 13) +# define DIS_SLP_X_STRCH_SUS_UP (1 << 12) +# define GEN_RST_STS (1 << 9) +# define RPS (1 << 2) +# define AFTERG3_EN (1 << 0) + +/* Function Disable PBASE + 0x34 */ +#define PBASE_FUNC_DIS 0x34 +#define PBASE_DISABLE_QUICKASSIST (1 << 0) +#define PBASE_DISABLE_GBE(x) (1 << (12 + x)) +#define PBASE_DISABLE_SATA2 (1 << 22) +#define PBASE_DISABLE_EHCI (1 << 23) +#define PBASE_DISABLE_SATA3 (1 << 23) + +/* GPIOBASE */ +#define GPIO_SC_USE_SEL 0x00 +#define GPIO_SC_IO_SEL 0x04 +#define GPIO_SC_GP_LVL 0x08 +#define GPIO_SC_TPE 0x0c +#define GPIO_SC_TNE 0x10 +#define GPIO_SC_TS 0x14 +#define GPIO_SUS_USE_SEL 0x80 +#define GPIO_SUS_IO_SEL 0x84 +#define GPIO_SUS_GP_LVL 0x88 +#define GPIO_SUS_TPE 0x8c +#define GPIO_SUS_TNE 0x90 +#define GPIO_SUS_TS 0x94 +#define GPIO_SUS_WE 0x98 + +/* IOBASE */ +#define CFIO_PAD_CONF0 0x00 +#define CFIO_PAD_CONF1 0x04 +#define CFIO_PAD_VAL 0x08 +#define CFIO_PAD_DFT 0x0C + +/* ACPI BASE */ +#define PM1_STS 0x00 +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) +#define PM1_EN 0x02 +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) +#define PM1_CNT 0x04 +#define SLP_EN (1 << 13) +#define SLP_TYP (7 << 10) +#define SLP_TYP_S0 0 +#define SLP_TYP_S1 1 +#define SLP_TYP_S3 5 +#define SLP_TYP_S4 6 +#define SLP_TYP_S5 7 +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) +#define PM1_TMR 0x08 +#define PROC_CNT 0x10 +#define LV2 0x14 +#define LV3 0x15 +#define LV4 0x16 +#define PM2_CNT 0x50 // mobile only +#define GPE0_STS 0x20 +#define PME_B0_STS (1 << 13) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define PCI_EXP_STS (1 << 9) +#define RI_STS (1 << 8) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) +#define GPE0_EN 0x28 +#define PME_B0_EN (1 << 13) +#define PME_EN (1 << 11) +#define TCOSCI_EN (1 << 6) +#define SMI_EN 0x30 +#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic +#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic +#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS +#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) +#define MCSMI_EN (1 << 11) // Trap microcontroller range access +#define BIOS_RLS (1 << 7) // asserts SCI on bit set +#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set +#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# +#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# +#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic +#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit +#define EOS (1 << 1) // End of SMI (deassert SMI#) +#define GBL_SMI_EN (1 << 0) // SMI# generation at all? +#define SMI_STS 0x34 +#define ALT_GP_SMI_EN 0x38 +#define ALT_GP_SMI_STS 0x3a +#define GPE_CNTL 0x42 +#define DEVACT_STS 0x44 +#define PM2A_CNT_BLK 0x50 +#define SS_CNT 0x50 +#define C3_RES 0x54 +#define TCO1_STS 0x64 +#define DMISCI_STS (1 << 9) +#define TCO2_STS 0x66 +#define TCO1_CNT 0x68 +#define TCO_TMR_HALT (1 << 11) +#define TCO_LOCK (1 << 12) + +/* + * SPI Opcode Menu setup for SPIBAR lockdown + * should support most common flash chips. + */ + +#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ +#define SPI_OPTYPE_0 0x01 /* Write, no address */ + +#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ +#define SPI_OPTYPE_1 0x03 /* Write, address required */ + +#define SPI_OPMENU_2 0x03 /* READ: Read Data */ +#define SPI_OPTYPE_2 0x02 /* Read, address required */ + +#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ +#define SPI_OPTYPE_3 0x00 /* Read, no address */ + +#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ +#define SPI_OPTYPE_4 0x03 /* Write, address required */ + +#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ +#define SPI_OPTYPE_5 0x00 /* Read, no address */ + +#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ +#define SPI_OPTYPE_6 0x03 /* Write, address required */ + +#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ +#define SPI_OPTYPE_7 0x02 /* Read, address required */ + +#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ + (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) +#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ + (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) + +#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ + (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ + (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ + (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) + +#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ + +#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ +#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ +#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ +#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ +#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ +#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ +#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ +#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ +#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ +#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ +#define SPIBAR_FADDR 0x08 /* SPI flash address */ +#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ + +/* HPET Registers - Base is set in hardware to 0xFED00000 */ +#define HPET_GCID 0xFED00000 /* General Capabilities and ID */ +#define HPET_GCFG 0xFED00010 /* General Configuration */ +#define HPET_GIS 0xFED00020 /* General Interrupt Status */ +#define HPET_MCV 0xFED000F0 /* Main Counter Value */ +#define HPET_T0C 0xFED00100 /* Timer 0 Configuration and Capabilities */ +#define HPET_T0CV_L 0xFED00108 /* Lower Timer 0 Comparator Value */ +#define HPET_T0CV_U 0xFED0010C /* Upper Timer 0 Comparator Value */ +#define HPET_T1C 0xFED00120 /* Timer 1 Configuration and Capabilities */ +#define HPET_T1CV 0xFED00128 /* Timer 1 Comparator Value */ +#define HPET_T2C 0xFED00140 /* Timer 2 Configuration and Capabilities */ +#define HPET_T2CV 0xFED00148 /* Timer 2 Comparator Value */ + + +#endif /* __ACPI__ */ +#endif /* SOUTHBRIDGE_INTEL_RANGELEY_PCH_H */ diff --git a/src/southbridge/intel/fsp_rangeley/spi.c b/src/southbridge/intel/fsp_rangeley/spi.c new file mode 100644 index 0000000000..6df99fdc80 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/spi.c @@ -0,0 +1,773 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * Copyright (C) 2013, Intel Corporation. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This file is derived from the flashrom project. */ +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <delay.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> + +#include <spi-generic.h> + +static int ich_status_poll(u16 bitmask, int wait_til_set); + +#ifdef __SMM__ +#include <arch/pci_mmio_cfg.h> +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#else /* !__SMM__ */ +#include <device/device.h> +#include <device/pci.h> +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#endif /* !__SMM__ */ + +typedef struct spi_slave ich_spi_slave; + +static int ichspi_lock = 0; + +typedef struct ich7_spi_regs { + uint16_t spis; + uint16_t spic; + uint32_t spia; + uint64_t spid[8]; + uint64_t _pad; + uint32_t bbar; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; +} __attribute__((packed)) ich7_spi_regs; + +typedef struct ich9_spi_regs { + uint32_t bfpr; // 0 + uint16_t hsfs; // 4 + uint16_t hsfc; // 6 + uint32_t faddr; // 8 + uint32_t _reserved0; // 0xC + uint32_t fdata[16]; // 0x10 + uint32_t frap; // 0x50 + uint32_t freg[5]; // 0x54 + uint32_t _reserved1[3]; // 0x67 + uint32_t pr[5]; // 0x74 + uint32_t _reserved2[2]; // 0x88 + uint8_t ssfs; // 0x90 + uint8_t ssfc[3]; // 0x91 + uint16_t preop; // 0x94 + uint16_t optype; // 0x96 + uint8_t opmenu[8]; // 0x98 + uint32_t bbar; // 0xB0 + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __attribute__((packed)) ich9_spi_regs; + +typedef struct ich10_spi_regs { + uint32_t bfpr; + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; + uint32_t fracc; + uint32_t freg[5]; + uint32_t _reserved1[3]; + uint32_t pr[5]; + uint32_t _reserved2[2]; + uint8_t ssfs; + uint8_t ssfc[3]; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; + uint8_t _reserved3[16]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[36]; + uint32_t scs; + uint32_t bcr; + uint32_t tcgc; +} __attribute__((packed)) ich10_spi_regs; + +typedef struct ich_spi_controller { + int locked; + + uint8_t *opmenu; + int menubytes; + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; + uint8_t *bcr; +} ich_spi_controller; + +static ich_spi_controller cntlr; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000 +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + BCR_BIOSWE = 0x0001, + BCR_BLE = 0x0002, + BCR_SRC_MASK = 0x000c, + BCR_SRC_SHIFT = 0x0002, + BCR_SRC_NO_PREF = 0x0000, + BCR_SRC_NO_PREF_CACHE = 0x0004, + BCR_SRC_EN_PREF_CACHE = 0x0008, + BCR_TSS = 0x0010, + BCR_SMMBWP = 0x0020, + BCR_RESERVED_MASK = 0xffc0 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3, +}; + +#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH) + +static u8 readb_(const void *addr) +{ + u8 v = read8((unsigned long)addr); + printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u16 readw_(const void *addr) +{ + u16 v = read16((unsigned long)addr); + printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u32 readl_(const void *addr) +{ + u32 v = read32((unsigned long)addr); + printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static void writeb_(u8 b, const void *addr) +{ + write8((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writew_(u16 b, const void *addr) +{ + write16((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writel_(u32 b, const void *addr) +{ + write32((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ + +#define readb_(a) read8((uint32_t)a) +#define readw_(a) read16((uint32_t)a) +#define readl_(a) read32((uint32_t)a) +#define writeb_(val, addr) write8((uint32_t)addr, val) +#define writew_(val, addr) write16((uint32_t)addr, val) +#define writel_(val, addr) write32((uint32_t)addr, val) + +#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + const uint8_t *bvalue = value; + uint8_t *bdest = dest; + + while (size >= 4) { + writel_(*(const uint32_t *)bvalue, bdest); + bdest += 4; bvalue += 4; size -= 4; + } + while (size) { + writeb_(*bvalue, bdest); + bdest++; bvalue++; size--; + } +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + const uint8_t *bsrc = src; + uint8_t *bvalue = value; + + while (size >= 4) { + *(uint32_t *)bvalue = readl_(bsrc); + bsrc += 4; bvalue += 4; size -= 4; + } + while (size) { + *bvalue = readb_(bsrc); + bsrc++; bvalue++; size--; + } +} + +static void ich_set_bbar(uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + if (cntlr.bbar == NULL) + return; + + minaddr &= bbar_mask; + ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + writel_(ichspi_bbar, cntlr.bbar); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + printk(BIOS_DEBUG, "spi_cs_is_valid used but not implemented\n"); + return 0; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) +{ + ich_spi_slave *slave = malloc(sizeof(*slave)); + + if (!slave) { + printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); + return NULL; + } + + memset(slave, 0, sizeof(*slave)); + + slave->bus = bus; + slave->cs = cs; + return slave; +} + +/* + * Check if this device ID matches one of supported Intel SOC devices. + * + * Return the ICH version if there is a match, or zero otherwise. + */ +static inline int get_ich_version(uint16_t device_id) +{ + + if ((device_id >= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MAX)) + return 10; + + return 0; +} + +void spi_init(void) +{ + int ich_version = 0; + uint8_t bios_cntl; + device_t dev; + uint32_t ids; + uint16_t vendor_id, device_id; + +#ifdef __SMM__ + dev = PCI_DEV(0, 31, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(31, 0)); +#endif + pci_read_config_dword(dev, 0, &ids); + vendor_id = ids; + device_id = (ids >> 16); + + if (vendor_id != PCI_VENDOR_ID_INTEL) { + printk(BIOS_DEBUG, "SPI: No SOC found.\n"); + return; + } + + ich_version = get_ich_version(device_id); + + if (!ich_version) { + printk(BIOS_DEBUG, "SPI: No known SOC found.\n"); + return; + } + + switch (ich_version) { + case 10: + { + uint8_t *spibase; /* SPI Base Address */ + uint32_t sbase; /* SPI Base Address Register */ + pci_read_config_dword(dev, 0x54, &sbase); + /* Bits 31-9 are the base address, 8-4 are reserved, 3-0 are used. */ + spibase = (uint8_t *)(sbase & 0xffffff00); + ich10_spi_regs *ich10_spi = + (ich10_spi_regs *)(spibase); + ichspi_lock = readw_(&ich10_spi->hsfs) & HSFS_FLOCKDN; + cntlr.opmenu = ich10_spi->opmenu; + cntlr.menubytes = sizeof(ich10_spi->opmenu); + cntlr.optype = &ich10_spi->optype; + cntlr.addr = &ich10_spi->faddr; + cntlr.data = (uint8_t *)ich10_spi->fdata; + cntlr.databytes = sizeof(ich10_spi->fdata); + cntlr.status = &ich10_spi->ssfs; + cntlr.control = (uint16_t *)ich10_spi->ssfc; + cntlr.bbar = NULL; + cntlr.preop = &ich10_spi->preop; + cntlr.bcr = (uint8_t *)&ich10_spi->bcr; + break; + } + default: + printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version); + } + + ich_set_bbar(0); + + /* Disable the BIOS write protect so write commands are allowed. */ + switch (ich_version) { + case 10: + { + /* Deassert SMM BIOS write protect(SMM BWP) and assert enable flash write(BIOSWE) */ + bios_cntl = readb_(cntlr.bcr); + bios_cntl &= ~BCR_SMMBWP; + bios_cntl |= BCR_BIOSWE; + writeb_(bios_cntl, cntlr.bcr); + break; + } + + default: + break; + } +} + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +typedef struct spi_transaction { + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +} spi_transaction; + +static inline void spi_use_out(spi_transaction *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(spi_transaction *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(spi_transaction *trans) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout > 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + } + + /* Fast read command is called with 5 bytes instead of 4 */ + if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + --trans->bytesout; + } +} + +static int spi_setup_opcode(spi_transaction *trans) +{ + uint16_t optypes; + uint8_t opmenu[cntlr.menubytes]; + + trans->opcode = trans->out[0]; + spi_use_out(trans, 1); + if (!ichspi_lock) { + /* The lock is off, so just use index 0. */ + writeb_(trans->opcode, cntlr.opmenu); + optypes = readw_(cntlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + writew_(optypes, cntlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + /* Write Enable is handled as atomic prefix */ + if (trans->opcode == SPI_OPCODE_WREN) + return 0; + + read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < cntlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == cntlr.menubytes) { + printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = readw_(cntlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(spi_transaction *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 60000; /* This will result in 600 ms */ + u16 status = 0; + + while (timeout--) { + status = readw_(cntlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + writew_((status & bitmask), cntlr.status); + return status; + } + udelay(10); + } + + printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) +{ + return min(cntlr.databytes, buf_len); +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bytesout, void *din, unsigned int bytesin) +{ + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + + spi_transaction trans = { + dout, bytesout, + din, bytesin, + 0xff, 0xff, 0 + }; + + /* There has to always at least be an opcode. */ + if (!bytesout || !dout) { + printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); + return -1; + } + /* Make sure if we read something we have a place to put it. */ + if (bytesin != 0 && !din) { + printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); + + spi_setup_type(&trans); + if ((opcode_index = spi_setup_opcode(&trans)) < 0) + return -1; + if ((with_address = spi_setup_offset(&trans)) < 0) + return -1; + + if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + writew_(trans.opcode, cntlr.preop); + return 0; + } + + /* Preset control fields */ + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (readw_(cntlr.preop)) + control |= SPIC_ACS; + + if (!trans.bytesout && !trans.bytesin) { + /* SPI addresses are 24 bit only */ + if (with_address) + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + /* + * This is a 'no data' command (like Write Enable), its + * bitesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + writew_(control, cntlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); + return -1; + } + + goto spi_xfer_exit; + } + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans.bytesout > cntlr.databytes) { + printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" + " spi_crop_chunk()?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans.bytesout || trans.bytesin) { + uint32_t data_length; + + /* SPI addresses are 24 bit only */ + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + if (trans.bytesout) + data_length = min(trans.bytesout, cntlr.databytes); + else + data_length = min(trans.bytesin, cntlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans.bytesout) { + write_reg(trans.out, cntlr.data, data_length); + spi_use_out(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((cntlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + writew_(control, cntlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans.bytesin) { + read_reg(cntlr.data, trans.in, data_length); + spi_use_in(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + } + +spi_xfer_exit: + /* Clear atomic preop now that xfer is done */ + writew_(0, cntlr.preop); + + return 0; +} diff --git a/src/southbridge/intel/fsp_rangeley/watchdog.c b/src/southbridge/intel/fsp_rangeley/watchdog.c new file mode 100644 index 0000000000..06ab0894f9 --- /dev/null +++ b/src/southbridge/intel/fsp_rangeley/watchdog.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <watchdog.h> +#include "soc.h" + +void watchdog_off(void) +{ + device_t dev; + u32 value, abase; + + /* Turn off the watchdog. */ + dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); + + /* Enable I/O space. */ + value = pci_read_config16(dev, 0x04); + value |= 1; + pci_write_config16(dev, 0x04, value); + + /* Get TCO base. */ + abase = (pci_read_config32(dev, ABASE) & ~0xf); + + /* Disable the watchdog timer. */ + value = inw(abase + 0x68); + value |= 1 << 11; + outw(value, abase + 0x68); + + /* Clear TCO timeout status. */ + outw(0x0008, abase + 0x64); + outw(0x0002, abase + 0x66); + + printk(BIOS_DEBUG, "TCO Watchdog disabled\n"); +} |