diff options
Diffstat (limited to 'src/southbridge/via/vt8231/lpc.c')
-rw-r--r-- | src/southbridge/via/vt8231/lpc.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/src/southbridge/via/vt8231/lpc.c b/src/southbridge/via/vt8231/lpc.c new file mode 100644 index 0000000000..40854dbcf7 --- /dev/null +++ b/src/southbridge/via/vt8231/lpc.c @@ -0,0 +1,165 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <arch/ioapic.h> +#include "chip.h" + +/* PIRQ init + */ +static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 }; +static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 }; +static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 }; + +/* + Our IDSEL mappings are as follows + PCI slot is AD31 (device 15) (00:14.0) + Southbridge is AD28 (device 12) (00:11.0) +*/ +static void pci_routing_fixup(struct device *dev) +{ + + printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev); + if (dev) { + /* initialize PCI interupts - these assignments depend + on the PCB routing of PINTA-D + + PINTA = IRQ11 + PINTB = IRQ5 + PINTC = IRQ10 + PINTD = IRQ12 + */ + pci_write_config8(dev, 0x55, 0xb0); + pci_write_config8(dev, 0x56, 0xa5); + pci_write_config8(dev, 0x57, 0xc0); + } + + // Standard southbridge components + printk(BIOS_INFO, "setting southbridge\n"); + pci_assign_irqs(0, 0x11, southbridgeIrqs); + + // Ethernet built into southbridge + printk(BIOS_INFO, "setting ethernet\n"); + pci_assign_irqs(0, 0x12, enetIrqs); + + // PCI slot + printk(BIOS_INFO, "setting pci slot\n"); + pci_assign_irqs(0, 0x14, slotIrqs); + printk(BIOS_INFO, "%s: DONE\n", __func__); +} + +static void vt8231_init(struct device *dev) +{ + unsigned char enables; + + printk(BIOS_DEBUG, "vt8231 init\n"); + + // enable the internal I/O decode + enables = pci_read_config8(dev, 0x6C); + enables |= 0x80; + pci_write_config8(dev, 0x6C, enables); + + // Set bit 6 of 0x40, because Award does it (IO recovery time) + // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI + // interrupts can be properly marked as level triggered. + enables = pci_read_config8(dev, 0x40); + pci_write_config8(dev, 0x40, enables); + + // Set 0x42 to 0xf0 to match Award bios + enables = pci_read_config8(dev, 0x42); + enables |= 0xf0; + pci_write_config8(dev, 0x42, enables); + + // Set bit 3 of 0x4a, to match award (dummy pci request) + enables = pci_read_config8(dev, 0x4a); + enables |= 0x08; + pci_write_config8(dev, 0x4a, enables); + + // Set bit 3 of 0x4f to match award (use INIT# as cpu reset) + enables = pci_read_config8(dev, 0x4f); + enables |= 0x08; + pci_write_config8(dev, 0x4f, enables); + + // Set 0x58 to 0x03 to match Award + pci_write_config8(dev, 0x58, 0x03); + + // enable the ethernet/RTC + if (dev) { + enables = pci_read_config8(dev, 0x51); + enables |= 0x18; + pci_write_config8(dev, 0x51, enables); + } + + // enable IDE, since Linux won't do it. + // First do some more things to devfn (17,0) + // note: this should already be cleared, according to the book. + enables = pci_read_config8(dev, 0x50); + printk(BIOS_DEBUG, "IDE enable in reg. 50 is 0x%x\n", enables); + enables &= ~8; // need manifest constant here! + printk(BIOS_DEBUG, "set IDE reg. 50 to 0x%x\n", enables); + pci_write_config8(dev, 0x50, enables); + + // set default interrupt values (IDE) + enables = pci_read_config8(dev, 0x4c); + printk(BIOS_DEBUG, "IRQs in reg. 4c are 0x%x\n", enables & 0xf); + // clear out whatever was there. + enables &= ~0xf; + enables |= 4; + printk(BIOS_DEBUG, "setting reg. 4c to 0x%x\n", enables); + pci_write_config8(dev, 0x4c, enables); + + // set up the serial port interrupts. + // com2 to 3, com1 to 4 + pci_write_config8(dev, 0x46, 0x04); + pci_write_config8(dev, 0x47, 0x03); + pci_write_config8(dev, 0x6e, 0x98); + + /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ + pci_write_config8(dev, 0x40, 0x54); + //ethernet_fixup(); + + // Start the rtc + rtc_init(0); +} + +static void vt8231_read_resources(device_t dev) +{ + struct resource *res; + + pci_dev_read_resources(dev); + + res = new_resource(dev, 1); + res->base = 0x0UL; + res->size = 0x1000UL; + res->limit = 0xffffUL; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void southbridge_init(struct device *dev) +{ + vt8231_init(dev); + pci_routing_fixup(dev); +} + +static struct device_operations vt8231_lpc_ops = { + .read_resources = vt8231_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = &southbridge_init, + .scan_bus = scan_static_bus, + .enable = 0, + .ops_pci = 0, +}; + +static const struct pci_driver lpc_driver __pci_driver = { + .ops = &vt8231_lpc_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_8231, +}; |