summaryrefslogtreecommitdiff
path: root/src/southbridge/via/vt8231/vt8231.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/via/vt8231/vt8231.c')
-rw-r--r--src/southbridge/via/vt8231/vt8231.c450
1 files changed, 41 insertions, 409 deletions
diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c
index d78bb2cf86..514d0c0626 100644
--- a/src/southbridge/via/vt8231/vt8231.c
+++ b/src/southbridge/via/vt8231/vt8231.c
@@ -1,441 +1,73 @@
-
-#include <arch/io.h>
+#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
-#include <console/console.h>
+
+#include <pc80/mc146818rtc.h>
+#include <pc80/keyboard.h>
+
#include "vt8231.h"
#include "chip.h"
-void pc_keyboard_init(void);
+/* Base 8231 controller */
+static device_t lpc_dev;
-void hard_reset(void)
+void hard_reset(void)
{
- printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
-}
-
-static void usb_on(int enable)
-{
- unsigned char regval;
-
- /* Base 8231 controller */
- device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
- /* USB controller 1 */
- device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
- /* USB controller 2 */
- device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev2);
-
- /* enable USB1 */
- if(dev2) {
- if (enable) {
- pci_write_config8(dev2, 0x3c, 0x05);
- pci_write_config8(dev2, 0x04, 0x07);
- } else {
- pci_write_config8(dev2, 0x3c, 0x00);
- pci_write_config8(dev2, 0x04, 0x00);
- }
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x10);
- else
- regval |= 0x10;
- pci_write_config8(dev0, 0x50, regval);
- }
-
- /* enable USB2 */
- if(dev3) {
- if (enable) {
- pci_write_config8(dev3, 0x3c, 0x05);
- pci_write_config8(dev3, 0x04, 0x07);
- } else {
- pci_write_config8(dev3, 0x3c, 0x00);
- pci_write_config8(dev3, 0x04, 0x00);
- }
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x20);
- else
- regval |= 0x20;
- pci_write_config8(dev0, 0x50, regval);
- }
+ printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
}
static void keyboard_on(void)
{
unsigned char regval;
-
- /* Base 8231 controller */
- device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
-
- /* kevinh/Ispiri - update entire function to use
- new pci_write_config8 */
- if (dev0) {
- regval = pci_read_config8(dev0, 0x51);
+ if (lpc_dev) {
+ regval = pci_read_config8(lpc_dev, 0x51);
regval |= 0x0f;
- pci_write_config8(dev0, 0x51, regval);
+ pci_write_config8(lpc_dev, 0x51, regval);
}
init_pc_keyboard(0x60, 0x64, 0);
}
-static void nvram_on(void)
+static void com_port_on(void)
{
- /*
- * the VIA 8231 South has a very different nvram setup than the
- * piix4e ...
- * turn on ProMedia nvram.
- * TO DO: use the PciWriteByte function here.
- */
-
- /*
- * kevinh/Ispiri - I don't think this is the correct address/value
- * intel_conf_writeb(0x80008841, 0xFF);
+#if 0
+ // enable com1 and com2.
+ enables = pci_read_config8(dev, 0x6e);
+
+ /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
+ * is enable com port a as com1 kevinh/Ispiri - Old code
+ * thought 0x01 would make it com1, that was wrong enables =
+ * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev, 0x6e,
+ * enables); // note: this is also a redo of some port of
+ * assembly, but we want everything up.
*/
-}
-
-/*
- * Enable the ethernet device and turn off stepping (because it is integrated
- * inside the southbridge)
- */
-static void ethernet_fixup()
-{
- device_t edev;
- uint8_t byte;
-
- printk_info("Ethernet fixup\n");
-
- edev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_7, 0);
- if (edev) {
- printk_debug("Configuring VIA LAN\n");
-
- /* We don't need stepping - though the device supports it */
- byte = pci_read_config8(edev, PCI_COMMAND);
- byte &= ~PCI_COMMAND_WAIT;
- pci_write_config8(edev, PCI_COMMAND, byte);
- } else {
- printk_debug("VIA LAN not found\n");
- }
-}
-
-
-/* we need to do things in this function so that PCI scan will find
- * them. One problem here is that we can't use ANY of the new device
- * stuff. This work here precedes all that.
- * Fundamental problem with linuxbios V2 architecture.
- * You can't do pci control in the C code without having done a PCI scan.
- * But in some cases you need to to pci control in the c code before doing
- * a PCI scan. But you can't use arch/romcc_io.h (the code you need) because
- * that has functions with the same name but different type signatures
- * (e.g. device_t). This needs to get fixed. We need low-level pci scans
- * in the C code.
- */
-static void vt8231_pci_enable(struct southbridge_via_vt8231_config *conf)
-{
- /*
- unsigned long busdevfn = 0x8000;
- if (conf->enable_ide) {
- printk_debug("%s: enabling IDE function\n", __FUNCTION__);
- }
- */
-}
-
-/* PIRQ init
- */
-void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
-
-
-static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
-static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
-static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
-
-/*
- Our IDSEL mappings are as follows
- PCI slot is AD31 (device 15) (00:14.0)
- Southbridge is AD28 (device 12) (00:11.0)
-*/
-static void pci_routing_fixup(struct device *dev)
-{
-
- printk_info("%s: dev is %p\n", __FUNCTION__, dev);
- if (dev) {
- /* initialize PCI interupts - these assignments depend
- on the PCB routing of PINTA-D
-
- PINTA = IRQ11
- PINTB = IRQ5
- PINTC = IRQ10
- PINTD = IRQ12
- */
- pci_write_config8(dev, 0x55, 0xb0);
- pci_write_config8(dev, 0x56, 0xa5);
- pci_write_config8(dev, 0x57, 0xc0);
- }
-
- // Standard southbridge components
- printk_info("setting southbridge\n");
- pci_assign_irqs(0, 0x11, southbridgeIrqs);
-
- // Ethernet built into southbridge
- printk_info("setting ethernet\n");
- pci_assign_irqs(0, 0x12, enetIrqs);
-
- // PCI slot
- printk_info("setting pci slot\n");
- pci_assign_irqs(0, 0x14, slotIrqs);
- printk_info("%s: DONE\n", __FUNCTION__);
-}
-
-
-void
-dump_south(void)
-{
- device_t dev0;
- dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
- int i,j;
-
- for(i = 0; i < 256; i += 16) {
- printk_debug("0x%x: ", i);
- for(j = 0; j < 16; j++) {
- printk_debug("%02x ", pci_read_config8(dev0, i+j));
- }
- printk_debug("\n");
- }
+ /* set com1 to 115 kbaud not clear how to do this yet.
+ * forget it; done in assembly.
+ */
+#endif
}
-static void vt8231_init(struct southbridge_via_vt8231_config *conf)
+/* FixME: to be removed ? */
+static void vt8231_enable(struct device *dev)
{
- unsigned char enables;
- device_t dev0;
- device_t dev1;
- device_t devpwr;
-
- // to do: use the pcibios_find function here, instead of
- // hard coding the devfn.
- // done - kevinh/Ispiri
- printk_debug("vt8231 init\n");
- /* Base 8231 controller */
- dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
- /* IDE controller */
- dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 0);
- /* Power management controller */
- devpwr = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4, 0);
-
- // enable the internal I/O decode
- enables = pci_read_config8(dev0, 0x6C);
- enables |= 0x80;
- pci_write_config8(dev0, 0x6C, enables);
-
- // Map 4MB of FLASH into the address space
- pci_write_config8(dev0, 0x41, 0x7f);
-
- // Set bit 6 of 0x40, because Award does it (IO recovery time)
- // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
- // interrupts can be properly marked as level triggered.
- enables = pci_read_config8(dev0, 0x40);
- pci_write_config8(dev0, 0x40, enables);
-
- // Set 0x42 to 0xf0 to match Award bios
- enables = pci_read_config8(dev0, 0x42);
- enables |= 0xf0;
- pci_write_config8(dev0, 0x42, enables);
-
- // Set bit 3 of 0x4a, to match award (dummy pci request)
- enables = pci_read_config8(dev0, 0x4a);
- enables |= 0x08;
- pci_write_config8(dev0, 0x4a, enables);
-
- // Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
- enables = pci_read_config8(dev0, 0x4f);
- enables |= 0x08;
- pci_write_config8(dev0, 0x4f, enables);
-
- // Set 0x58 to 0x03 to match Award
- pci_write_config8(dev0, 0x58, 0x03);
-
- // enable the ethernet/RTC
- if(dev0) {
- enables = pci_read_config8(dev0, 0x51);
- enables |= 0x18;
- pci_write_config8(dev0, 0x51, enables);
+ struct southbridge_via_vt8231_config *conf = dev->chip_info;
+
+ if (!lpc_dev) {
+ /* the first time called, enable devices not on PCI bus
+ * FIXME: is that device struct there yet? */
+ lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8231, 0);
+ if (conf->enable_keyboard)
+ keyboard_on();
+ if (conf->enable_com_ports)
+ com_port_on();
}
-
-
- // enable com1 and com2.
- if (conf->enable_com_ports) {
- enables = pci_read_config8(dev0, 0x6e);
-
- /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
- * is enable com port a as com1 kevinh/Ispiri - Old code
- * thought 0x01 would make it com1, that was wrong enables =
- * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
- * enables); // note: this is also a redo of some port of
- * assembly, but we want everything up.
- */
-
- /* set com1 to 115 kbaud not clear how to do this yet.
- * forget it; done in assembly.
- */
-
- }
- // enable IDE, since Linux won't do it.
- // First do some more things to devfn (17,0)
- // note: this should already be cleared, according to the book.
- enables = pci_read_config8(dev0, 0x50);
- printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
- enables &= ~8; // need manifest constant here!
- printk_debug("set IDE reg. 50 to 0x%x\n", enables);
- pci_write_config8(dev0, 0x50, enables);
-
- // set default interrupt values (IDE)
- enables = pci_read_config8(dev0, 0x4c);
- printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
- // clear out whatever was there.
- enables &= ~0xf;
- enables |= 4;
- printk_debug("setting reg. 4c to 0x%x\n", enables);
- pci_write_config8(dev0, 0x4c, enables);
-
- // set up the serial port interrupts.
- // com2 to 3, com1 to 4
- pci_write_config8(dev0, 0x46, 0x04);
- pci_write_config8(dev0, 0x47, 0x03);
- pci_write_config8(dev0, 0x6e, 0x98);
- //
- // Power management setup
- //
- // Set ACPI base address to IO 0x4000
- pci_write_config32(devpwr, 0x48, 0x4001);
-
- // Enable ACPI access (and setup like award)
- pci_write_config8(devpwr, 0x41, 0x84);
-
- // Set hardware monitor base address to IO 0x6000
- pci_write_config32(devpwr, 0x70, 0x6001);
-
- // Enable hardware monitor (and setup like award)
- pci_write_config8(devpwr, 0x74, 0x01);
-
- // set IO base address to 0x5000
- pci_write_config32(devpwr, 0x90, 0x5001);
-
- // Enable SMBus
- pci_write_config8(devpwr, 0xd2, 0x01);
-
- //
- // IDE setup
- //
- if (! conf->enable_native_ide) {
- // Run the IDE controller in 'compatiblity mode - i.e. don't use PCI
- // interrupts. Using PCI ints confuses linux for some reason.
-
- printk_info("%s: enabling compatibility IDE addresses\n", __FUNCTION__);
- enables = pci_read_config8(dev1, 0x42);
- printk_debug("enables in reg 0x42 0x%x\n", enables);
- enables &= ~0xc0; // compatability mode
- pci_write_config8(dev1, 0x42, enables);
- enables = pci_read_config8(dev1, 0x42);
- printk_debug("enables in reg 0x42 read back as 0x%x\n", enables);
- }
-
- enables = pci_read_config8(dev1, 0x40);
- printk_debug("enables in reg 0x40 0x%x\n", enables);
- enables |= 3;
- pci_write_config8(dev1, 0x40, enables);
- enables = pci_read_config8(dev1, 0x40);
- printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
-
- // Enable prefetch buffers
- enables = pci_read_config8(dev1, 0x41);
- enables |= 0xf0;
- pci_write_config8(dev1, 0x41, enables);
-
- // Lower thresholds (cause award does it)
- enables = pci_read_config8(dev1, 0x43);
- enables &= ~0x0f;
- enables |= 0x05;
- pci_write_config8(dev1, 0x43, enables);
-
- // PIO read prefetch counter (cause award does it)
- pci_write_config8(dev1, 0x44, 0x18);
-
- // Use memory read multiple
- pci_write_config8(dev1, 0x45, 0x1c);
-
- // address decoding.
- // we want "flexible", i.e. 1f0-1f7 etc. or native PCI
- // kevinh@ispiri.com - the standard linux drivers seem ass slow when
- // used in native mode - I've changed back to classic
- enables = pci_read_config8(dev1, 0x9);
- printk_debug("enables in reg 0x9 0x%x\n", enables);
- // by the book, set the low-order nibble to 0xa.
- if (conf->enable_native_ide) {
- enables &= ~0xf;
- // cf/cg silicon needs an 'f' here.
- enables |= 0xf;
- } else {
- enables &= ~0x5;
- }
-
- pci_write_config8(dev1, 0x9, enables);
- enables = pci_read_config8(dev1, 0x9);
- printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
-
- // standard bios sets master bit.
- enables = pci_read_config8(dev1, 0x4);
- printk_debug("command in reg 0x4 0x%x\n", enables);
- enables |= 7;
-
- // No need for stepping - kevinh@ispiri.com
- enables &= ~0x80;
-
- pci_write_config8(dev1, 0x4, enables);
- enables = pci_read_config8(dev1, 0x4);
- printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
-
- if (! conf->enable_native_ide) {
- // Use compatability mode - per award bios
- pci_write_config32(dev1, 0x10, 0x0);
- pci_write_config32(dev1, 0x14, 0x0);
- pci_write_config32(dev1, 0x18, 0x0);
- pci_write_config32(dev1, 0x1c, 0x0);
-
- // Force interrupts to use compat mode - just like Award bios
- pci_write_config8(dev1, 0x3d, 00);
- pci_write_config8(dev1, 0x3c, 0xff);
- }
-
-
- /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
- pci_write_config8(dev0, 0x40, 0x54);
- ethernet_fixup();
-
- // Start the rtc
- rtc_init(0);
-}
-
-static void southbridge_init(struct device *dev) {
- vt8231_init(dev->chip_info);
- pci_routing_fixup(dev);
-}
-
-struct device_operations vt8231_dev_ops = {
- .init = &southbridge_init,
-};
-
-static void southbridge_enable(struct device *dev)
-{
- dev->ops = &vt8231_dev_ops;
}
struct chip_operations southbridge_via_vt8231_ops = {
CHIP_NAME("VIA vt8231")
- .enable_dev = southbridge_enable,
+ .enable_dev = vt8231_enable,
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 05:40:33 +0000