diff options
Diffstat (limited to 'src/southbridge/via/vt8235/ide.c')
-rw-r--r-- | src/southbridge/via/vt8235/ide.c | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/src/southbridge/via/vt8235/ide.c b/src/southbridge/via/vt8235/ide.c new file mode 100644 index 0000000000..961f860fed --- /dev/null +++ b/src/southbridge/via/vt8235/ide.c @@ -0,0 +1,113 @@ +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <console/console.h> +#include "chip.h" + +static void ide_init(struct device *dev) +{ + struct southbridge_via_vt8235_config *conf = dev->chip_info; + unsigned char enables; + + printk(BIOS_INFO, "Enabling VIA IDE.\n"); + + /*if (!conf->enable_native_ide) { */ + /* + * Run the IDE controller in 'compatiblity mode - i.e. don't + * use PCI interrupts. Using PCI ints confuses linux for some + * reason. + */ + printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n", + __func__); + enables = pci_read_config8(dev, 0x42); + printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables); + enables &= ~0xc0; // compatability mode + pci_write_config8(dev, 0x42, enables); + enables = pci_read_config8(dev, 0x42); + printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", + enables); + /* } */ + + enables = pci_read_config8(dev, 0x40); + printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); + enables |= 3; + pci_write_config8(dev, 0x40, enables); + enables = pci_read_config8(dev, 0x40); + printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); + + // Enable prefetch buffers + enables = pci_read_config8(dev, 0x41); + enables |= 0xf0; + pci_write_config8(dev, 0x41, enables); + + // Lower thresholds (cause award does it) + enables = pci_read_config8(dev, 0x43); + enables &= ~0x0f; + enables |= 0x05; + pci_write_config8(dev, 0x43, enables); + + // PIO read prefetch counter (cause award does it) + pci_write_config8(dev, 0x44, 0x18); + + // Use memory read multiple + pci_write_config8(dev, 0x45, 0x1c); + + // address decoding. + // we want "flexible", i.e. 1f0-1f7 etc. or native PCI + // kevinh@ispiri.com - the standard linux drivers seem ass slow when + // used in native mode - I've changed back to classic + enables = pci_read_config8(dev, 0x9); + printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); + // by the book, set the low-order nibble to 0xa. + if (conf->enable_native_ide) { + enables &= ~0xf; + // cf/cg silicon needs an 'f' here. + enables |= 0xf; + } else { + enables &= ~0x5; + } + + pci_write_config8(dev, 0x9, enables); + enables = pci_read_config8(dev, 0x9); + printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); + + // standard bios sets master bit. + enables = pci_read_config8(dev, 0x4); + printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); + enables |= 7; + + // No need for stepping - kevinh@ispiri.com + enables &= ~0x80; + + pci_write_config8(dev, 0x4, enables); + enables = pci_read_config8(dev, 0x4); + printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); + + if (!conf->enable_native_ide) { + // Use compatability mode - per award bios + pci_write_config32(dev, 0x10, 0x0); + pci_write_config32(dev, 0x14, 0x0); + pci_write_config32(dev, 0x18, 0x0); + pci_write_config32(dev, 0x1c, 0x0); + + // Force interrupts to use compat mode - just like Award bios + pci_write_config8(dev, 0x3d, 0x0); + pci_write_config8(dev, 0x3c, 0xff); + } +} + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .enable = 0, + .ops_pci = 0, +}; + +static const struct pci_driver northbridge_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_82C586_1, +}; |