diff options
Diffstat (limited to 'src/southbridge/via/vt8235/vt8235_ide.c')
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_ide.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c index 9c2af3c781..ec22f9053b 100644 --- a/src/southbridge/via/vt8235/vt8235_ide.c +++ b/src/southbridge/via/vt8235/vt8235_ide.c @@ -10,7 +10,7 @@ static void ide_init(struct device *dev) struct southbridge_via_vt8235_config *conf = dev->chip_info; unsigned char enables; - printk_info("Enabling VIA IDE.\n"); + printk(BIOS_INFO, "Enabling VIA IDE.\n"); /*if (!conf->enable_native_ide) { */ /* @@ -18,23 +18,23 @@ static void ide_init(struct device *dev) * use PCI interrupts. Using PCI ints confuses linux for some * reason. */ - printk_info("%s: enabling compatibility IDE addresses\n", + printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n", __func__); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables); enables &= ~0xc0; // compatability mode pci_write_config8(dev, 0x42, enables); enables = pci_read_config8(dev, 0x42); - printk_debug("enables in reg 0x42 read back as 0x%x\n", + printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", enables); /* } */ enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); enables |= 3; pci_write_config8(dev, 0x40, enables); enables = pci_read_config8(dev, 0x40); - printk_debug("enables in reg 0x40 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); // Enable prefetch buffers enables = pci_read_config8(dev, 0x41); @@ -58,7 +58,7 @@ static void ide_init(struct device *dev) // kevinh@ispiri.com - the standard linux drivers seem ass slow when // used in native mode - I've changed back to classic enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); // by the book, set the low-order nibble to 0xa. if (conf->enable_native_ide) { enables &= ~0xf; @@ -70,11 +70,11 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x9, enables); enables = pci_read_config8(dev, 0x9); - printk_debug("enables in reg 0x9 read back as 0x%x\n", enables); + printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); // standard bios sets master bit. enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); enables |= 7; // No need for stepping - kevinh@ispiri.com @@ -82,7 +82,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x4, enables); enables = pci_read_config8(dev, 0x4); - printk_debug("command in reg 0x4 reads back as 0x%x\n", enables); + printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); if (!conf->enable_native_ide) { // Use compatability mode - per award bios |