summaryrefslogtreecommitdiff
path: root/src/southbridge/via/vt8235/vt8235_lpc.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/via/vt8235/vt8235_lpc.c')
-rw-r--r--src/southbridge/via/vt8235/vt8235_lpc.c36
1 files changed, 18 insertions, 18 deletions
diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c
index 0746bc9a13..e2bfc3681e 100644
--- a/src/southbridge/via/vt8235/vt8235_lpc.c
+++ b/src/southbridge/via/vt8235/vt8235_lpc.c
@@ -88,7 +88,7 @@ static void pci_routing_fixup(struct device *dev)
printk(BIOS_INFO, "setting pci slot\n");
pci_assign_irqs(0, 0x14, pin_to_irq(slotPins));
- // Cardbus slot
+ // Cardbus slot
printk(BIOS_INFO, "setting cardbus slot\n");
pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins));
@@ -99,11 +99,11 @@ static void pci_routing_fixup(struct device *dev)
printk(BIOS_SPEW, "%s: DONE\n", __func__);
}
-/*
+/*
* Set up the power management capabilities directly into ACPI mode. This
* avoids having to handle any System Management Interrupts (SMI's) which I
* can't figure out how to do !!!!
- */
+ */
static void setup_pm(device_t dev)
{
@@ -112,7 +112,7 @@ static void setup_pm(device_t dev)
// Set ACPI base address to IO 0x4000
pci_write_config16(dev, 0x88, 0x0401);
-
+
// set ACPI irq to 5
pci_write_config8(dev, 0x82, 0x45);
@@ -138,7 +138,7 @@ static void setup_pm(device_t dev)
outw(0xffff, 0x420);
outw(0xffff, 0x428);
outl(0xffffffff, 0x430);
-
+
outw(0x0, 0x424);
outw(0x0, 0x42a);
outw(0x1, 0x42c);
@@ -152,29 +152,29 @@ static void setup_pm(device_t dev)
static void vt8235_init(struct device *dev)
{
unsigned char enables;
-
+
printk(BIOS_DEBUG, "vt8235 init\n");
// enable the internal I/O decode
enables = pci_read_config8(dev, 0x6C);
enables |= 0x80;
pci_write_config8(dev, 0x6C, enables);
-
+
// Map 4MB of FLASH into the address space
pci_write_config8(dev, 0x41, 0x7f);
-
+
// Set bit 6 of 0x40, because Award does it (IO recovery time)
- // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
+ // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
// interrupts can be properly marked as level triggered.
enables = pci_read_config8(dev, 0x40);
enables |= 0x45;
pci_write_config8(dev, 0x40, enables);
-
+
// Set 0x42 to 0xf0 to match Award bios
enables = pci_read_config8(dev, 0x42);
enables |= 0xf0;
pci_write_config8(dev, 0x42, enables);
-
+
/* Set 0x58 to 0x03 to match Award */
pci_write_config8(dev, 0x58, 0x03);
@@ -187,16 +187,16 @@ static void vt8235_init(struct device *dev)
enables = pci_read_config8(dev, 0x4a);
enables |= 0x08;
pci_write_config8(dev, 0x4a, enables);
-
+
// Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
enables = pci_read_config8(dev, 0x4f);
enables |= 0x08;
pci_write_config8(dev, 0x4f, enables);
-
+
// Set 0x58 to 0x03 to match Award
pci_write_config8(dev, 0x58, 0x03);
-
-
+
+
/* enable serial irq */
pci_write_config8(dev, 0x52, 0x9);
@@ -205,10 +205,10 @@ static void vt8235_init(struct device *dev)
// Power management setup
setup_pm(dev);
-
+
/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
pci_write_config8(dev, 0x40, 0x54);
-
+
// Start the rtc
rtc_init(0);
}
@@ -248,7 +248,7 @@ static void vt8235_enable_resources(device_t dev)
pci_dev_enable_resources(dev);
enable_childrens_resources(dev);
}
-
+
static void southbridge_init(struct device *dev)
{
vt8235_init(dev);