diff options
Diffstat (limited to 'src/southbridge/via/vt8235')
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235.c | 12 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_early_serial.c | 12 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_early_smbus.c | 74 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_ide.c | 38 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_lpc.c | 36 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235_nic.c | 2 |
6 files changed, 87 insertions, 87 deletions
diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c index 747c2157f1..4fa2784661 100644 --- a/src/southbridge/via/vt8235/vt8235.c +++ b/src/southbridge/via/vt8235/vt8235.c @@ -12,7 +12,7 @@ static void keyboard_on(struct device *dev) u8 regval; regval = pci_read_config8(dev, 0x51); - regval |= 0x05; + regval |= 0x05; regval &= 0xfd; pci_write_config8(dev, 0x51, regval); @@ -23,7 +23,7 @@ static void keyboard_on(struct device *dev) void dump_south(device_t dev0) { int i,j; - + for(i = 0; i < 256; i += 16) { printk(BIOS_DEBUG, "0x%x: ", i); for(j = 0; j < 16; j++) { @@ -51,10 +51,10 @@ static void vt8235_enable(struct device *dev) model = pci_read_config16(dev,0x2); printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model); - + /* If this is not the southbridge itself just return. * This is necessary because USB devices are slot 10, whereas this - * device is slot 11 therefore usb devices get called first during + * device is slot 11 therefore usb devices get called first during * the bus scan. We don't want to wait until we could do dev->init * because that's too late. */ @@ -69,13 +69,13 @@ static void vt8235_enable(struct device *dev) /* enable RTC and ethernet */ regval = pci_read_config8(dev, 0x51); - regval |= 0x18; + regval |= 0x18; pci_write_config8(dev, 0x51, regval); /* turn on keyboard */ keyboard_on(dev); - /* enable USB 1.1 & USB 2.0 - redundant really since we've + /* enable USB 1.1 & USB 2.0 - redundant really since we've * already been there - see note above */ regval = pci_read_config8(dev, 0x50); diff --git a/src/southbridge/via/vt8235/vt8235_early_serial.c b/src/southbridge/via/vt8235/vt8235_early_serial.c index 7823172485..11f98fae39 100644 --- a/src/southbridge/via/vt8235/vt8235_early_serial.c +++ b/src/southbridge/via/vt8235/vt8235_early_serial.c @@ -8,25 +8,25 @@ #define SIO_BASE 0x3f0 #define SIO_DATA SIO_BASE+1 -static void vt8235_writepnpaddr(uint8_t val) +static void vt8235_writepnpaddr(uint8_t val) { outb(val, 0x2e); outb(val, 0xeb); } -static void vt8235_writepnpdata(uint8_t val) +static void vt8235_writepnpdata(uint8_t val) { outb(val, 0x2f); outb(val, 0xeb); } -static void vt8235_writesiobyte(uint16_t reg, uint8_t val) +static void vt8235_writesiobyte(uint16_t reg, uint8_t val) { outb(val, reg); } -static void vt8235_writesioword(uint16_t reg, uint16_t val) +static void vt8235_writesioword(uint16_t reg, uint16_t val) { outw(val, reg); } @@ -36,12 +36,12 @@ static void vt8235_writesioword(uint16_t reg, uint16_t val) mainboard */ -static void enable_vt8235_serial(void) +static void enable_vt8235_serial(void) { // turn on pnp vt8235_writepnpaddr(0x87); vt8235_writepnpaddr(0x87); - // now go ahead and set up com1. + // now go ahead and set up com1. // set address vt8235_writepnpaddr(0x7); vt8235_writepnpdata(0x2); diff --git a/src/southbridge/via/vt8235/vt8235_early_smbus.c b/src/southbridge/via/vt8235/vt8235_early_smbus.c index db403eb5fb..1876461a3d 100644 --- a/src/southbridge/via/vt8235/vt8235_early_smbus.c +++ b/src/southbridge/via/vt8235/vt8235_early_smbus.c @@ -12,7 +12,7 @@ #define SMBTRNSADD 0x9 #define SMBSLVDATA 0xa #define SMLINK_PIN_CTL 0xe -#define SMBUS_PIN_CTL 0xf +#define SMBUS_PIN_CTL 0xf /* Define register settings */ #define HOST_RESET 0xff @@ -34,17 +34,17 @@ static void enable_smbus(void) /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0); - + if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\n"); - } + } // set IO base address to SMBUS_IO_BASE pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1); - - // Enable SMBus + + // Enable SMBus pci_write_config8(dev, 0xd2, (0x4 << 1) | 1); - + /* make it work for I/O ... */ pci_write_config16(dev, 4, 1); @@ -55,13 +55,13 @@ static void enable_smbus(void) for(i = 0 ; i < 5000 ; i++) outb(0x80,0x80); - /* + /* * The VT1211 serial port needs 48 mhz clock, on power up it is getting * only 24 mhz, there is some mysterious device on the smbus that can * fix this...this code below does it. * */ - outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT); - outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0); + outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT); + outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0); outb(0x83, SMBUS_IO_BASE+SMBHSTCMD); outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD); outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL); @@ -92,7 +92,7 @@ static int smbus_wait_until_ready(void) print_debug_hex8(c); print_debug("\n"); c = inb(SMBUS_IO_BASE + SMBHSTSTAT); - /* nop */ + /* nop */ } } while(--loops); @@ -105,13 +105,13 @@ void smbus_reset(void) outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); - + smbus_wait_until_ready(); print_debug("After reset status "); print_debug_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT)); print_debug("\n"); } - + static int smbus_wait_until_done(void) @@ -121,11 +121,11 @@ static int smbus_wait_until_done(void) loops = SMBUS_TIMEOUT; do { smbus_delay(); - + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); if (byte & 1) break; - + } while(--loops); return loops?0:-1; } @@ -156,46 +156,46 @@ static void smbus_print_error(unsigned char host_status_register) /* SMBus routines borrowed from VIA's Trident Driver */ /* this works, so I am not going to touch it for now -- rgm */ -static unsigned char smbus_read_byte(unsigned char devAdr, - unsigned char bIndex) +static unsigned char smbus_read_byte(unsigned char devAdr, + unsigned char bIndex) { unsigned short i; unsigned char bData; unsigned char sts = 0; - + /* clear host status */ outb(0xff, SMBUS_IO_BASE); - + /* check SMBUS ready */ for ( i = 0; i < 0xFFFF; i++ ) if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 ) break; - + /* set host command */ outb(bIndex, SMBUS_IO_BASE+3); - + /* set slave address */ outb(devAdr | 0x01, SMBUS_IO_BASE+4); - + /* start */ outb(0x48, SMBUS_IO_BASE+2); - + /* SMBUS Wait Ready */ for ( i = 0; i < 0xFFFF; i++ ) if ( ((sts = (inb(SMBUS_IO_BASE) & 0x1f)) & 0x01) == 0 ) break; - + if ((sts & ~3) != 0) { smbus_print_error(sts); return 0; } bData=inb(SMBUS_IO_BASE+5); - + return bData; - + } -/* for reference, here is the fancier version which we will use at some +/* for reference, here is the fancier version which we will use at some * point */ # if 0 @@ -203,11 +203,11 @@ int smbus_read_byte(unsigned device, unsigned address, unsigned char *result) { unsigned char host_status_register; unsigned char byte; - + reset(); - + smbus_wait_until_ready(); - + /* setup transaction */ /* disable interrupts */ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); @@ -218,29 +218,29 @@ int smbus_read_byte(unsigned device, unsigned address, unsigned char *result) /* set up for a byte data read */ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL); - + /* clear any lingering errors, so the transaction will run */ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - + /* clear the data byte...*/ outb(0, SMBUS_IO_BASE + SMBHSTDAT0); - + /* start the command */ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL); - + /* poll for transaction completion */ smbus_wait_until_done(); - + host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); - + /* Ignore the In Use Status... */ host_status_register &= ~(1 << 6); - + /* read results of transaction */ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); smbus_print_error(byte); - + *result = byte; return host_status_register != 0x02; } diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c index ec22f9053b..961f860fed 100644 --- a/src/southbridge/via/vt8235/vt8235_ide.c +++ b/src/southbridge/via/vt8235/vt8235_ide.c @@ -28,69 +28,69 @@ static void ide_init(struct device *dev) printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", enables); /* } */ - + enables = pci_read_config8(dev, 0x40); printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); enables |= 3; pci_write_config8(dev, 0x40, enables); enables = pci_read_config8(dev, 0x40); printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); - + // Enable prefetch buffers enables = pci_read_config8(dev, 0x41); enables |= 0xf0; pci_write_config8(dev, 0x41, enables); - + // Lower thresholds (cause award does it) enables = pci_read_config8(dev, 0x43); enables &= ~0x0f; enables |= 0x05; pci_write_config8(dev, 0x43, enables); - + // PIO read prefetch counter (cause award does it) pci_write_config8(dev, 0x44, 0x18); - + // Use memory read multiple pci_write_config8(dev, 0x45, 0x1c); - - // address decoding. + + // address decoding. // we want "flexible", i.e. 1f0-1f7 etc. or native PCI - // kevinh@ispiri.com - the standard linux drivers seem ass slow when + // kevinh@ispiri.com - the standard linux drivers seem ass slow when // used in native mode - I've changed back to classic enables = pci_read_config8(dev, 0x9); printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); - // by the book, set the low-order nibble to 0xa. + // by the book, set the low-order nibble to 0xa. if (conf->enable_native_ide) { enables &= ~0xf; - // cf/cg silicon needs an 'f' here. + // cf/cg silicon needs an 'f' here. enables |= 0xf; } else { enables &= ~0x5; } - + pci_write_config8(dev, 0x9, enables); enables = pci_read_config8(dev, 0x9); printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); - - // standard bios sets master bit. + + // standard bios sets master bit. enables = pci_read_config8(dev, 0x4); printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); enables |= 7; - + // No need for stepping - kevinh@ispiri.com enables &= ~0x80; - + pci_write_config8(dev, 0x4, enables); enables = pci_read_config8(dev, 0x4); printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); - + if (!conf->enable_native_ide) { // Use compatability mode - per award bios pci_write_config32(dev, 0x10, 0x0); pci_write_config32(dev, 0x14, 0x0); pci_write_config32(dev, 0x18, 0x0); pci_write_config32(dev, 0x1c, 0x0); - + // Force interrupts to use compat mode - just like Award bios pci_write_config8(dev, 0x3d, 0x0); pci_write_config8(dev, 0x3c, 0xff); @@ -103,10 +103,10 @@ static struct device_operations ide_ops = { .enable_resources = pci_dev_enable_resources, .init = ide_init, .enable = 0, - .ops_pci = 0, + .ops_pci = 0, }; -static const struct pci_driver northbridge_driver __pci_driver = { +static const struct pci_driver northbridge_driver __pci_driver = { .ops = &ide_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_82C586_1, diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c index 0746bc9a13..e2bfc3681e 100644 --- a/src/southbridge/via/vt8235/vt8235_lpc.c +++ b/src/southbridge/via/vt8235/vt8235_lpc.c @@ -88,7 +88,7 @@ static void pci_routing_fixup(struct device *dev) printk(BIOS_INFO, "setting pci slot\n"); pci_assign_irqs(0, 0x14, pin_to_irq(slotPins)); - // Cardbus slot + // Cardbus slot printk(BIOS_INFO, "setting cardbus slot\n"); pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins)); @@ -99,11 +99,11 @@ static void pci_routing_fixup(struct device *dev) printk(BIOS_SPEW, "%s: DONE\n", __func__); } -/* +/* * Set up the power management capabilities directly into ACPI mode. This * avoids having to handle any System Management Interrupts (SMI's) which I * can't figure out how to do !!!! - */ + */ static void setup_pm(device_t dev) { @@ -112,7 +112,7 @@ static void setup_pm(device_t dev) // Set ACPI base address to IO 0x4000 pci_write_config16(dev, 0x88, 0x0401); - + // set ACPI irq to 5 pci_write_config8(dev, 0x82, 0x45); @@ -138,7 +138,7 @@ static void setup_pm(device_t dev) outw(0xffff, 0x420); outw(0xffff, 0x428); outl(0xffffffff, 0x430); - + outw(0x0, 0x424); outw(0x0, 0x42a); outw(0x1, 0x42c); @@ -152,29 +152,29 @@ static void setup_pm(device_t dev) static void vt8235_init(struct device *dev) { unsigned char enables; - + printk(BIOS_DEBUG, "vt8235 init\n"); // enable the internal I/O decode enables = pci_read_config8(dev, 0x6C); enables |= 0x80; pci_write_config8(dev, 0x6C, enables); - + // Map 4MB of FLASH into the address space pci_write_config8(dev, 0x41, 0x7f); - + // Set bit 6 of 0x40, because Award does it (IO recovery time) - // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI + // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI // interrupts can be properly marked as level triggered. enables = pci_read_config8(dev, 0x40); enables |= 0x45; pci_write_config8(dev, 0x40, enables); - + // Set 0x42 to 0xf0 to match Award bios enables = pci_read_config8(dev, 0x42); enables |= 0xf0; pci_write_config8(dev, 0x42, enables); - + /* Set 0x58 to 0x03 to match Award */ pci_write_config8(dev, 0x58, 0x03); @@ -187,16 +187,16 @@ static void vt8235_init(struct device *dev) enables = pci_read_config8(dev, 0x4a); enables |= 0x08; pci_write_config8(dev, 0x4a, enables); - + // Set bit 3 of 0x4f to match award (use INIT# as cpu reset) enables = pci_read_config8(dev, 0x4f); enables |= 0x08; pci_write_config8(dev, 0x4f, enables); - + // Set 0x58 to 0x03 to match Award pci_write_config8(dev, 0x58, 0x03); - - + + /* enable serial irq */ pci_write_config8(dev, 0x52, 0x9); @@ -205,10 +205,10 @@ static void vt8235_init(struct device *dev) // Power management setup setup_pm(dev); - + /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ pci_write_config8(dev, 0x40, 0x54); - + // Start the rtc rtc_init(0); } @@ -248,7 +248,7 @@ static void vt8235_enable_resources(device_t dev) pci_dev_enable_resources(dev); enable_childrens_resources(dev); } - + static void southbridge_init(struct device *dev) { vt8235_init(dev); diff --git a/src/southbridge/via/vt8235/vt8235_nic.c b/src/southbridge/via/vt8235/vt8235_nic.c index 86fef895de..71f169c055 100644 --- a/src/southbridge/via/vt8235/vt8235_nic.c +++ b/src/southbridge/via/vt8235/vt8235_nic.c @@ -5,7 +5,7 @@ #include <device/pci_ids.h> /* - * Enable the ethernet device and turn off stepping (because it is integrated + * Enable the ethernet device and turn off stepping (because it is integrated * inside the southbridge) */ static void nic_init(struct device *dev) |