summaryrefslogtreecommitdiff
path: root/src/southbridge/via/vt8235
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/via/vt8235')
-rw-r--r--src/southbridge/via/vt8235/vt8235.c464
-rw-r--r--src/southbridge/via/vt8235/vt8235.h195
-rw-r--r--src/southbridge/via/vt8235/vt8235_early_serial.c75
-rw-r--r--src/southbridge/via/vt8235/vt8235_early_smbus.c231
4 files changed, 965 insertions, 0 deletions
diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c
new file mode 100644
index 0000000000..89445d6a2a
--- /dev/null
+++ b/src/southbridge/via/vt8235/vt8235.c
@@ -0,0 +1,464 @@
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <device/chip.h>
+#include <console/console.h>
+#include "vt8231.h"
+#include "chip.h"
+
+void pc_keyboard_init(void);
+
+void hard_reset(void)
+{
+ printk_err("NO HARD RESET ON VT8231! FIX ME!\n");
+}
+
+static void usb_on(int enable)
+{
+ unsigned char regval;
+
+ /* Base 8231 controller */
+ device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ /* USB controller 1 */
+ device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
+ /* USB controller 2 */
+ device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev2);
+
+ /* enable USB1 */
+ if(dev2) {
+ if (enable) {
+ pci_write_config8(dev2, 0x3c, 0x05);
+ pci_write_config8(dev2, 0x04, 0x07);
+ } else {
+ pci_write_config8(dev2, 0x3c, 0x00);
+ pci_write_config8(dev2, 0x04, 0x00);
+ }
+ }
+
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ if (enable)
+ regval &= ~(0x10);
+ else
+ regval |= 0x10;
+ pci_write_config8(dev0, 0x50, regval);
+ }
+
+ /* enable USB2 */
+ if(dev3) {
+ if (enable) {
+ pci_write_config8(dev3, 0x3c, 0x05);
+ pci_write_config8(dev3, 0x04, 0x07);
+ } else {
+ pci_write_config8(dev3, 0x3c, 0x00);
+ pci_write_config8(dev3, 0x04, 0x00);
+ }
+ }
+
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ if (enable)
+ regval &= ~(0x20);
+ else
+ regval |= 0x20;
+ pci_write_config8(dev0, 0x50, regval);
+ }
+}
+
+static void keyboard_on(void)
+{
+ unsigned char regval;
+
+ /* Base 8231 controller */
+ device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+
+ /* kevinh/Ispiri - update entire function to use
+ new pci_write_config8 */
+
+ if (dev0) {
+ regval = pci_read_config8(dev0, 0x51);
+ regval |= 0x0f;
+ pci_write_config8(dev0, 0x51, regval);
+ }
+ init_pc_keyboard(0x60, 0x64, 0);
+}
+
+static void nvram_on(void)
+{
+ /*
+ * the VIA 8231 South has a very different nvram setup than the
+ * piix4e ...
+ * turn on ProMedia nvram.
+ * TO DO: use the PciWriteByte function here.
+ */
+
+ /*
+ * kevinh/Ispiri - I don't think this is the correct address/value
+ * intel_conf_writeb(0x80008841, 0xFF);
+ */
+}
+
+
+/*
+ * Enable the ethernet device and turn off stepping (because it is integrated
+ * inside the southbridge)
+ */
+static void ethernet_fixup()
+{
+ device_t edev;
+ uint8_t byte;
+
+ printk_info("Ethernet fixup\n");
+
+ edev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_7, 0);
+ if (edev) {
+ printk_debug("Configuring VIA LAN\n");
+
+ /* We don't need stepping - though the device supports it */
+ byte = pci_read_config8(edev, PCI_COMMAND);
+ byte &= ~PCI_COMMAND_WAIT;
+ pci_write_config8(edev, PCI_COMMAND, byte);
+ } else {
+ printk_debug("VIA LAN not found\n");
+ }
+}
+
+
+/* we need to do things in this function so that PCI scan will find
+ * them. One problem here is that we can't use ANY of the new device
+ * stuff. This work here precedes all that.
+ * Fundamental problem with linuxbios V2 architecture.
+ * You can't do pci control in the C code without having done a PCI scan.
+ * But in some cases you need to to pci control in the c code before doing
+ * a PCI scan. But you can't use arch/romcc_io.h (the code you need) because
+ * that has functions with the same name but different type signatures
+ * (e.g. device_t). This needs to get fixed. We need low-level pci scans
+ * in the C code.
+ */
+static void vt8231_pci_enable(struct southbridge_via_vt8231_config *conf)
+{
+ /*
+ unsigned long busdevfn = 0x8000;
+ if (conf->enable_ide) {
+ printk_debug("%s: enabling IDE function\n", __FUNCTION__);
+ }
+ */
+}
+
+/* PIRQ init
+ */
+void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
+
+
+static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
+static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
+static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
+
+/*
+ Our IDSEL mappings are as follows
+ PCI slot is AD31 (device 15) (00:14.0)
+ Southbridge is AD28 (device 12) (00:11.0)
+*/
+static void pci_routing_fixup(void)
+{
+ device_t dev;
+
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ printk_info("%s: dev is %p\n", __FUNCTION__, dev);
+ if (dev) {
+ /* initialize PCI interupts - these assignments depend
+ on the PCB routing of PINTA-D
+
+ PINTA = IRQ11
+ PINTB = IRQ5
+ PINTC = IRQ10
+ PINTD = IRQ12
+ */
+ pci_write_config8(dev, 0x55, 0xb0);
+ pci_write_config8(dev, 0x56, 0xa5);
+ pci_write_config8(dev, 0x57, 0xc0);
+ }
+
+ // Standard southbridge components
+ printk_info("setting southbridge\n");
+ pci_assign_irqs(0, 0x11, southbridgeIrqs);
+
+ // Ethernet built into southbridge
+ printk_info("setting ethernet\n");
+ pci_assign_irqs(0, 0x12, enetIrqs);
+
+ // PCI slot
+ printk_info("setting pci slot\n");
+ pci_assign_irqs(0, 0x14, slotIrqs);
+ printk_info("%s: DONE\n", __FUNCTION__);
+}
+
+
+void
+dump_south(void)
+{
+ device_t dev0;
+ dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ int i,j;
+
+ for(i = 0; i < 256; i += 16) {
+ printk_debug("0x%x: ", i);
+ for(j = 0; j < 16; j++) {
+ printk_debug("%02x ", pci_read_config8(dev0, i+j));
+ }
+ printk_debug("\n");
+ }
+}
+
+static void vt8231_init(struct southbridge_via_vt8231_config *conf)
+{
+ unsigned char enables;
+ device_t dev0;
+ device_t dev1;
+ device_t devpwr;
+
+ // to do: use the pcibios_find function here, instead of
+ // hard coding the devfn.
+ // done - kevinh/Ispiri
+ printk_debug("vt8231 init\n");
+ /* Base 8231 controller */
+ dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, 0);
+ /* IDE controller */
+ dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 0);
+ /* Power management controller */
+ devpwr = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4, 0);
+
+ // enable the internal I/O decode
+ enables = pci_read_config8(dev0, 0x6C);
+ enables |= 0x80;
+ pci_write_config8(dev0, 0x6C, enables);
+
+ // Map 4MB of FLASH into the address space
+ pci_write_config8(dev0, 0x41, 0x7f);
+
+ // Set bit 6 of 0x40, because Award does it (IO recovery time)
+ // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
+ // interrupts can be properly marked as level triggered.
+ enables = pci_read_config8(dev0, 0x40);
+ pci_write_config8(dev0, 0x40, enables);
+
+ // Set 0x42 to 0xf0 to match Award bios
+ enables = pci_read_config8(dev0, 0x42);
+ enables |= 0xf0;
+ pci_write_config8(dev0, 0x42, enables);
+
+ // Set bit 3 of 0x4a, to match award (dummy pci request)
+ enables = pci_read_config8(dev0, 0x4a);
+ enables |= 0x08;
+ pci_write_config8(dev0, 0x4a, enables);
+
+ // Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
+ enables = pci_read_config8(dev0, 0x4f);
+ enables |= 0x08;
+ pci_write_config8(dev0, 0x4f, enables);
+
+ // Set 0x58 to 0x03 to match Award
+ pci_write_config8(dev0, 0x58, 0x03);
+
+ // enable the ethernet/RTC
+ if(dev0) {
+ enables = pci_read_config8(dev0, 0x51);
+ enables |= 0x18;
+ pci_write_config8(dev0, 0x51, enables);
+ }
+
+
+ // enable com1 and com2.
+ if (conf->enable_com_ports) {
+ enables = pci_read_config8(dev0, 0x6e);
+
+ /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
+ * is enable com port a as com1 kevinh/Ispiri - Old code
+ * thought 0x01 would make it com1, that was wrong enables =
+ * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
+ * enables); // note: this is also a redo of some port of
+ * assembly, but we want everything up.
+ */
+
+ /* set com1 to 115 kbaud not clear how to do this yet.
+ * forget it; done in assembly.
+ */
+
+ }
+ // enable IDE, since Linux won't do it.
+ // First do some more things to devfn (17,0)
+ // note: this should already be cleared, according to the book.
+ enables = pci_read_config8(dev0, 0x50);
+ printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
+ enables &= ~8; // need manifest constant here!
+ printk_debug("set IDE reg. 50 to 0x%x\n", enables);
+ pci_write_config8(dev0, 0x50, enables);
+
+ // set default interrupt values (IDE)
+ enables = pci_read_config8(dev0, 0x4c);
+ printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
+ // clear out whatever was there.
+ enables &= ~0xf;
+ enables |= 4;
+ printk_debug("setting reg. 4c to 0x%x\n", enables);
+ pci_write_config8(dev0, 0x4c, enables);
+
+ // set up the serial port interrupts.
+ // com2 to 3, com1 to 4
+ pci_write_config8(dev0, 0x46, 0x04);
+ pci_write_config8(dev0, 0x47, 0x03);
+ pci_write_config8(dev0, 0x6e, 0x98);
+ //
+ // Power management setup
+ //
+ // Set ACPI base address to IO 0x4000
+ pci_write_config32(devpwr, 0x48, 0x4001);
+
+ // Enable ACPI access (and setup like award)
+ pci_write_config8(devpwr, 0x41, 0x84);
+
+ // Set hardware monitor base address to IO 0x6000
+ pci_write_config32(devpwr, 0x70, 0x6001);
+
+ // Enable hardware monitor (and setup like award)
+ pci_write_config8(devpwr, 0x74, 0x01);
+
+ // set IO base address to 0x5000
+ pci_write_config32(devpwr, 0x90, 0x5001);
+
+ // Enable SMBus
+ pci_write_config8(devpwr, 0xd2, 0x01);
+
+ //
+ // IDE setup
+ //
+ if (! conf->enable_native_ide) {
+ // Run the IDE controller in 'compatiblity mode - i.e. don't use PCI
+ // interrupts. Using PCI ints confuses linux for some reason.
+
+ printk_info("%s: enabling compatibility IDE addresses\n", __FUNCTION__);
+ enables = pci_read_config8(dev1, 0x42);
+ printk_debug("enables in reg 0x42 0x%x\n", enables);
+ enables &= ~0xc0; // compatability mode
+ pci_write_config8(dev1, 0x42, enables);
+ enables = pci_read_config8(dev1, 0x42);
+ printk_debug("enables in reg 0x42 read back as 0x%x\n", enables);
+ }
+
+ enables = pci_read_config8(dev1, 0x40);
+ printk_debug("enables in reg 0x40 0x%x\n", enables);
+ enables |= 3;
+ pci_write_config8(dev1, 0x40, enables);
+ enables = pci_read_config8(dev1, 0x40);
+ printk_debug("enables in reg 0x40 read back as 0x%x\n", enables);
+
+ // Enable prefetch buffers
+ enables = pci_read_config8(dev1, 0x41);
+ enables |= 0xf0;
+ pci_write_config8(dev1, 0x41, enables);
+
+ // Lower thresholds (cause award does it)
+ enables = pci_read_config8(dev1, 0x43);
+ enables &= ~0x0f;
+ enables |= 0x05;
+ pci_write_config8(dev1, 0x43, enables);
+
+ // PIO read prefetch counter (cause award does it)
+ pci_write_config8(dev1, 0x44, 0x18);
+
+ // Use memory read multiple
+ pci_write_config8(dev1, 0x45, 0x1c);
+
+ // address decoding.
+ // we want "flexible", i.e. 1f0-1f7 etc. or native PCI
+ // kevinh@ispiri.com - the standard linux drivers seem ass slow when
+ // used in native mode - I've changed back to classic
+ enables = pci_read_config8(dev1, 0x9);
+ printk_debug("enables in reg 0x9 0x%x\n", enables);
+ // by the book, set the low-order nibble to 0xa.
+ if (conf->enable_native_ide) {
+ enables &= ~0xf;
+ // cf/cg silicon needs an 'f' here.
+ enables |= 0xf;
+ } else {
+ enables &= ~0x5;
+ }
+
+ pci_write_config8(dev1, 0x9, enables);
+ enables = pci_read_config8(dev1, 0x9);
+ printk_debug("enables in reg 0x9 read back as 0x%x\n", enables);
+
+ // standard bios sets master bit.
+ enables = pci_read_config8(dev1, 0x4);
+ printk_debug("command in reg 0x4 0x%x\n", enables);
+ enables |= 7;
+
+ // No need for stepping - kevinh@ispiri.com
+ enables &= ~0x80;
+
+ pci_write_config8(dev1, 0x4, enables);
+ enables = pci_read_config8(dev1, 0x4);
+ printk_debug("command in reg 0x4 reads back as 0x%x\n", enables);
+
+ if (! conf->enable_native_ide) {
+ // Use compatability mode - per award bios
+ pci_write_config32(dev1, 0x10, 0x0);
+ pci_write_config32(dev1, 0x14, 0x0);
+ pci_write_config32(dev1, 0x18, 0x0);
+ pci_write_config32(dev1, 0x1c, 0x0);
+
+ // Force interrupts to use compat mode - just like Award bios
+ pci_write_config8(dev1, 0x3d, 00);
+ pci_write_config8(dev1, 0x3c, 0xff);
+ }
+
+
+ /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
+ pci_write_config8(dev0, 0x40, 0x54);
+ ethernet_fixup();
+
+ // Start the rtc
+ rtc_init(0);
+}
+
+static void southbridge_init(struct chip *chip, enum chip_pass pass)
+{
+
+ struct southbridge_via_vt8231_config *conf =
+ (struct southbridge_via_vt8231_config *)chip->chip_info;
+
+ switch (pass) {
+ case CONF_PASS_PRE_PCI:
+ vt8231_pci_enable(conf);
+ break;
+
+ case CONF_PASS_POST_PCI:
+ vt8231_init(conf);
+ pci_routing_fixup();
+ break;
+
+ case CONF_PASS_PRE_BOOT:
+ dump_south();
+ break;
+
+ default:
+ /* nothing yet */
+ break;
+ }
+}
+
+static void enumerate(struct chip *chip)
+{
+ extern struct device_operations default_pci_ops_bus;
+ chip_enumerate(chip);
+ chip->dev->ops = &default_pci_ops_bus;
+}
+
+struct chip_control southbridge_via_vt8231_control = {
+ .enumerate = enumerate,
+ .enable = southbridge_init,
+ .name = "VIA vt8231"
+};
diff --git a/src/southbridge/via/vt8235/vt8235.h b/src/southbridge/via/vt8235/vt8235.h
new file mode 100644
index 0000000000..f071371938
--- /dev/null
+++ b/src/southbridge/via/vt8235/vt8235.h
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /* winbond access routines and defines*/
+
+/* from the winbond data sheet -
+ The W83C553F SIO controller with PCI arbiter is a multi-function PCI device.
+ Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller.
+*/
+
+/*ISA bridge configuration space*/
+
+#define W83C553F_VID 0x10AD
+#define W83C553F_DID 0x0565
+#define W83C553F_IDE 0x0105
+
+/* Function 0 registers */
+#define W83C553F_PCICONTR 0x40 /*pci control reg*/
+#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/
+#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/
+#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/
+#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/
+#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/
+#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/
+#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/
+#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/
+#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/
+#define W83C553F_CDR 0x4c /*Clock Divisor Register*/
+#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/
+#define W83C553F_ATSCR 0x4e /*AT System Control register*/
+#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/
+#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/
+#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/
+#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/
+#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/
+
+/* Function 1 registers */
+#define W83C553F_PIR 0x09 /*Programming Interface Register*/
+#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/
+
+/* register bit definitions */
+#define W83C553F_IPADCR_MBE512 0x1
+#define W83C553F_IPADCR_MBE640 0x2
+#define W83C553F_IPADCR_IPATOM4 0x10
+#define W83C553F_IPADCR_IPATOM5 0x20
+#define W83C553F_IPADCR_IPATOM6 0x40
+#define W83C553F_IPADCR_IPATOM7 0x80
+
+#define W83C553F_CSCR_UBIOSCSE 0x10
+#define W83C553F_CSCR_BIOSWP 0x20
+
+#define W83C553F_IDECSR_P0EN 0x01
+#define W83C553F_IDECSR_P0F16 0x02
+#define W83C553F_IDECSR_P1EN 0x10
+#define W83C553F_IDECSR_P1F16 0x20
+#define W83C553F_IDECSR_LEGIRQ 0x800
+
+#define W83C553F_ATSCR_ISARE 0x40
+#define W83C553F_ATSCR_FERRE 0x10
+#define W83C553F_ATSCR_P92E 0x04
+#define W83C553F_ATSCR_KRCEE 0x02
+#define W83C553F_ATSCR_KGA20EE 0x01
+
+#define W83C553F_PIR_BM 0x80
+#define W83C553F_PIR_P1PROG 0x08
+#define W83C553F_PIR_P1NL 0x04
+#define W83C553F_PIR_P0PROG 0x02
+#define W83C553F_PIR_P0NL 0x01
+
+/*
+ * Interrupt controller
+ */
+#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20
+#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21
+#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21
+#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21
+#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21
+#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20
+#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20
+#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0
+#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0
+#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1
+#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1
+#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1
+#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1
+#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0
+#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0
+#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1
+
+#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43
+
+/*
+ * DMA controller
+ */
+#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */
+#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */
+
+/* command/status register bit definitions */
+
+#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */
+#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */
+#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */
+#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */
+
+#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */
+#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */
+#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */
+#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */
+
+#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */
+#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */
+#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */
+#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */
+
+/* mode register bit definitions */
+
+#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */
+#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */
+#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */
+#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */
+#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */
+#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */
+#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */
+#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */
+#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */
+#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */
+#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */
+#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */
+#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */
+#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */
+
+/* request register bit definitions */
+
+#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */
+#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */
+#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */
+#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */
+#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */
+
+/* write single mask bit register bit definitions */
+
+#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */
+#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */
+#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */
+#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */
+#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */
+
+/* read/write all mask bits register bit definitions */
+
+#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */
+#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */
+#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */
+#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */
+
+/* typedefs */
+
+#define W83C553F_DMA1_CS 0x8
+#define W83C553F_DMA1_WR 0x9
+#define W83C553F_DMA1_WSMB 0xA
+#define W83C553F_DMA1_WM 0xB
+#define W83C553F_DMA1_CBP 0xC
+#define W83C553F_DMA1_MC 0xD
+#define W83C553F_DMA1_CM 0xE
+#define W83C553F_DMA1_RWAMB 0xF
+
+#define W83C553F_DMA2_CS 0xD0
+#define W83C553F_DMA2_WR 0xD2
+#define W83C553F_DMA2_WSMB 0xD4
+#define W83C553F_DMA2_WM 0xD6
+#define W83C553F_DMA2_CBP 0xD8
+#define W83C553F_DMA2_MC 0xDA
+#define W83C553F_DMA2_CM 0xDC
+#define W83C553F_DMA2_RWAMB 0xDE
+
+void initialise_w83c553f(void);
diff --git a/src/southbridge/via/vt8235/vt8235_early_serial.c b/src/southbridge/via/vt8235/vt8235_early_serial.c
new file mode 100644
index 0000000000..1bfffed7f5
--- /dev/null
+++ b/src/southbridge/via/vt8235/vt8235_early_serial.c
@@ -0,0 +1,75 @@
+/*
+ * Enable the serial evices on the VIA
+ */
+
+
+/* The base address is 0x15c, 0x2e, depending on config bytes */
+
+#define SIO_BASE 0x3f0
+#define SIO_DATA SIO_BASE+1
+
+static void vt8231_writesuper(uint8_t reg, uint8_t val)
+{
+ outb(reg, SIO_BASE);
+ outb(val, SIO_DATA);
+}
+
+static void vt8231_writesiobyte(uint16_t reg, uint8_t val)
+{
+ outb(val, reg);
+}
+
+static void vt8231_writesioword(uint16_t reg, uint16_t val)
+{
+ outw(val, reg);
+}
+
+
+/* regs we use: 85, and the southbridge devfn is defined by the
+ mainboard
+ */
+
+static void enable_vt8231_serial(void)
+{
+ unsigned long x;
+ uint8_t c;
+ device_t dev;
+ outb(6, 0x80);
+ dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ outb(7, 0x80);
+ die("Serial controller not found\r\n");
+ }
+
+ /* first, you have to enable the superio and superio config.
+ put a 6 reg 80
+ */
+ c = pci_read_config8(dev, 0x50);
+ c |= 6;
+ pci_write_config8(dev, 0x50, c);
+ outb(2, 0x80);
+ // now go ahead and set up com1.
+ // set address
+ vt8231_writesuper(0xf4, 0xfe);
+ // enable serial out
+ vt8231_writesuper(0xf2, 7);
+ // That's it for the sio stuff.
+ // movl $SUPERIOCONFIG, %eax
+ // movb $9, %dl
+ // PCI_WRITE_CONFIG_BYTE
+ // set up reg to set baud rate.
+ vt8231_writesiobyte(0x3fb, 0x80);
+ // Set 115 kb
+ vt8231_writesioword(0x3f8, 1);
+ // Set 9.6 kb
+ // WRITESIOWORD(0x3f8, 12)
+ // now set no parity, one stop, 8 bits
+ vt8231_writesiobyte(0x3fb, 3);
+ // now turn on RTS, DRT
+ vt8231_writesiobyte(0x3fc, 3);
+ // Enable interrupts
+ vt8231_writesiobyte(0x3f9, 0xf);
+ // should be done. Dump a char for fun.
+ vt8231_writesiobyte(0x3f8, 48);
+}
diff --git a/src/southbridge/via/vt8235/vt8235_early_smbus.c b/src/southbridge/via/vt8235/vt8235_early_smbus.c
new file mode 100644
index 0000000000..1888176144
--- /dev/null
+++ b/src/southbridge/via/vt8235/vt8235_early_smbus.c
@@ -0,0 +1,231 @@
+#define SMBUS_IO_BASE 0x5000
+
+#define SMBHSTSTAT 0x0
+#define SMBSLVSTAT 0x1
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBSLVCTL 0x8
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+/* Define register settings */
+#define HOST_RESET 0xff
+#define DIMM_BASE 0xa0 // 1010000 is base for DIMM in SMBus
+#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ
+
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+static void enable_smbus(void)
+{
+ device_t dev;
+ unsigned char c;
+ /* Power management controller */
+ dev = pci_locate_device(PCI_ID(0x1106,0x8235), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\r\n");
+ }
+
+ // set IO base address to SMBUS_IO_BASE
+ pci_write_config32(dev, 0x90, SMBUS_IO_BASE|1);
+
+ // Enable SMBus
+ c = pci_read_config8(dev, 0xd2);
+ c |= 5;
+ pci_write_config8(dev, 0xd2, c);
+
+ /* make it work for I/O ...
+ */
+ dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+ c = pci_read_config8(dev, 4);
+ c |= 1;
+ pci_write_config8(dev, 4, c);
+ print_debug_hex8(c);
+ print_debug(" is the comm register\r\n");
+
+ print_debug("SMBus controller enabled\r\n");
+}
+
+
+static inline void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(void)
+{
+ unsigned char c;
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+ c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ while((c & 1) == 1) {
+ print_debug("c is ");
+ print_debug_hex8(c);
+ print_debug("\r\n");
+ c = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ /* nop */
+ }
+
+ } while(--loops);
+ return loops?0:-1;
+}
+
+void smbus_reset(void)
+{
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT);
+
+ smbus_wait_until_ready();
+ print_debug("After reset status ");
+ print_debug_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT));
+ print_debug("\r\n");
+}
+
+
+
+static int smbus_wait_until_done(void)
+{
+ unsigned long loops;
+ unsigned char byte;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ if (byte & 1)
+ break;
+
+ } while(--loops);
+ return loops?0:-1;
+}
+
+static void smbus_print_error(unsigned char host_status_register)
+{
+
+ print_err("smbus_error: ");
+ print_err_hex8(host_status_register);
+ print_err("\r\n");
+ if (host_status_register & (1 << 4)) {
+ print_err("Interrup/SMI# was Failed Bus Transaction\r\n");
+ }
+ if (host_status_register & (1 << 3)) {
+ print_err("Bus Error\r\n");
+ }
+ if (host_status_register & (1 << 2)) {
+ print_err("Device Error\r\n");
+ }
+ if (host_status_register & (1 << 1)) {
+ print_err("Interrupt/SMI# was Successful Completion\r\n");
+ }
+ if (host_status_register & (1 << 0)) {
+ print_err("Host Busy\r\n");
+ }
+}
+
+
+/* SMBus routines borrowed from VIA's Trident Driver */
+/* this works, so I am not going to touch it for now -- rgm */
+static unsigned char smbus_read_byte(unsigned char devAdr,
+ unsigned char bIndex)
+{
+ unsigned short i;
+ unsigned char bData;
+ unsigned char sts = 0;
+
+ /* clear host status */
+ outb(0xff, SMBUS_IO_BASE);
+
+ /* check SMBUS ready */
+ for ( i = 0; i < 0xFFFF; i++ )
+ if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 )
+ break;
+
+ /* set host command */
+ outb(bIndex, SMBUS_IO_BASE+3);
+
+ /* set slave address */
+ outb(devAdr | 0x01, SMBUS_IO_BASE+4);
+
+ /* start */
+ outb(0x48, SMBUS_IO_BASE+2);
+
+ /* SMBUS Wait Ready */
+ for ( i = 0; i < 0xFFFF; i++ )
+ if ( ((sts = inb(SMBUS_IO_BASE)) & 0x01) == 0 )
+ break;
+ if ((sts & ~3) != 0) {
+ smbus_print_error(sts);
+ return 0;
+ }
+ bData=inb(SMBUS_IO_BASE+5);
+
+ return bData;
+
+}
+
+/* for reference, here is the fancier version which we will use at some
+ * point
+ */
+# if 0
+int smbus_read_byte(unsigned device, unsigned address, unsigned char *result)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+
+ reset();
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2),
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* Ignore the In Use Status... */
+ host_status_register &= ~(1 << 6);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+ smbus_print_error(byte);
+
+ *result = byte;
+ return host_status_register != 0x02;
+}
+
+
+#endif
+