diff options
Diffstat (limited to 'src/southbridge/via/vt8237r/ide.c')
-rw-r--r-- | src/southbridge/via/vt8237r/ide.c | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/src/southbridge/via/vt8237r/ide.c b/src/southbridge/via/vt8237r/ide.c new file mode 100644 index 0000000000..209437b729 --- /dev/null +++ b/src/southbridge/via/vt8237r/ide.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on other VIA SB code. */ + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <console/console.h> +#include "vt8237r.h" +#include "chip.h" + +/** + * Cable type detect function, weak so it can be overloaded in mainboard.c + */ +u32 __attribute__((weak)) vt8237_ide_80pin_detect(struct device *dev) +{ + struct southbridge_via_vt8237r_config *sb = + (struct southbridge_via_vt8237r_config *)dev->chip_info; + u32 res; + res = sb->ide0_80pin_cable ? VT8237R_IDE0_80PIN_CABLE : 0; + res |= sb->ide1_80pin_cable ? VT8237R_IDE1_80PIN_CABLE : 0; + return res; +} + +/** + * No native mode. Interrupts from unconnected HDDs might occur if + * IRQ14/15 is used for PCI. Therefore no native mode support. + */ +static void ide_init(struct device *dev) +{ + struct southbridge_via_vt8237r_config *sb = + (struct southbridge_via_vt8237r_config *)dev->chip_info; + + u8 enables; + u32 cablesel; + + printk(BIOS_INFO, "%s IDE interface %s\n", "Primary", + sb->ide0_enable ? "enabled" : "disabled"); + printk(BIOS_INFO, "%s IDE interface %s\n", "Secondary", + sb->ide1_enable ? "enabled" : "disabled"); + enables = pci_read_config8(dev, IDE_CS) & ~0x3; + enables |= (sb->ide0_enable << 1) | sb->ide1_enable; + pci_write_config8(dev, IDE_CS, enables); + enables = pci_read_config8(dev, IDE_CS); + printk(BIOS_DEBUG, "Enables in reg 0x40 read back as 0x%x\n", enables); + + /* Enable only compatibility mode. */ + enables = pci_read_config8(dev, 0x09); + enables &= 0xFA; + pci_write_config8(dev, 0x09, enables); + + enables = pci_read_config8(dev, IDE_CONF_II); + enables &= ~0xc0; + pci_write_config8(dev, IDE_CONF_II, enables); + enables = pci_read_config8(dev, IDE_CONF_II); + printk(BIOS_DEBUG, "Enables in reg 0x42 read back as 0x%x\n", enables); + + /* Enable prefetch buffers. */ + enables = pci_read_config8(dev, IDE_CONF_I); + enables |= 0xf0; + pci_write_config8(dev, IDE_CONF_I, enables); + + /* Flush FIFOs at half. */ + enables = pci_read_config8(dev, IDE_CONF_FIFO); + enables &= 0xf0; + enables |= (1 << 2) | (1 << 0); + pci_write_config8(dev, IDE_CONF_FIFO, enables); + + /* PIO read prefetch counter, Bus Master IDE Status Reg. Read Retry. */ + enables = pci_read_config8(dev, IDE_MISC_I); + enables &= 0xe2; + enables |= (1 << 4) | (1 << 3); + pci_write_config8(dev, IDE_MISC_I, enables); + + /* Use memory read multiple, Memory-Write-and-Invalidate. */ + enables = pci_read_config8(dev, IDE_MISC_II); + enables &= 0xEF; + enables |= (1 << 2) | (1 << 3); + pci_write_config8(dev, IDE_MISC_II, enables); + + /* Force interrupts to use compat mode. */ + pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x0); + pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff); + + /* Cable guy... */ + cablesel = pci_read_config32(dev, IDE_UDMA); + cablesel &= ~VT8237R_IDE_CABLESEL_MASK; + cablesel |= vt8237_ide_80pin_detect(dev); + pci_write_config32(dev, IDE_UDMA, cablesel); + +#if CONFIG_EPIA_VT8237R_INIT + device_t lpc_dev; + + /* Set PATA Output Drive Strength */ + lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC, 0); + if (lpc_dev) + pci_write_config8(lpc_dev, 0x7C, 0x20); +#endif +} + +static const struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .enable = 0, + .ops_pci = 0, +}; + +static const struct pci_driver northbridge_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_82C586_1, +}; |