diff options
Diffstat (limited to 'src/southbridge')
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/Kconfig | 19 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/Makefile.inc | 23 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/audio.c | 25 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/chip.h | 34 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/hard_reset.c | 21 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/ide_sd_sata.c | 167 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/southbridge.c | 632 | ||||
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/southbridge.h | 42 |
8 files changed, 0 insertions, 963 deletions
diff --git a/src/southbridge/dmp/vortex86ex/Kconfig b/src/southbridge/dmp/vortex86ex/Kconfig deleted file mode 100644 index 37bd7c8d55..0000000000 --- a/src/southbridge/dmp/vortex86ex/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 DMP Electronics Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -config SOUTHBRIDGE_DMP_VORTEX86EX - bool - select AZALIA_PLUGIN_SUPPORT - select HAVE_HARD_RESET diff --git a/src/southbridge/dmp/vortex86ex/Makefile.inc b/src/southbridge/dmp/vortex86ex/Makefile.inc deleted file mode 100644 index 7232a63873..0000000000 --- a/src/southbridge/dmp/vortex86ex/Makefile.inc +++ /dev/null @@ -1,23 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 DMP Electronics Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ifeq ($(CONFIG_SOUTHBRIDGE_DMP_VORTEX86EX),y) - -ramstage-y += southbridge.c -ramstage-y += hard_reset.c -ramstage-y += ide_sd_sata.c -ramstage-y += audio.c - -endif diff --git a/src/southbridge/dmp/vortex86ex/audio.c b/src/southbridge/dmp/vortex86ex/audio.c deleted file mode 100644 index 05a0d8c7d2..0000000000 --- a/src/southbridge/dmp/vortex86ex/audio.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/azalia_device.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* RDC HD audio controller */ -static const struct pci_driver rdc_audio __pci_driver = { - .ops = &default_azalia_audio_ops, - .vendor = PCI_VENDOR_ID_RDC, - .device = 0x3010, -}; diff --git a/src/southbridge/dmp/vortex86ex/chip.h b/src/southbridge/dmp/vortex86ex/chip.h deleted file mode 100644 index 11bf3cca9a..0000000000 --- a/src/southbridge/dmp/vortex86ex/chip.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _SOUTHBRIDGE_DMP_VORTEX86EX -#define _SOUTHBRIDGE_DMP_VORTEX86EX - -struct southbridge_dmp_vortex86ex_config { - /* PCI function enables */ - /* i.e. so that pci scan bus will find them. */ - /* I am putting in IDE as an example but obviously this needs - * to be more complete! - */ - int enable_ide; - /* enables of functions of devices */ - int enable_usb; - int enable_native_ide; - int enable_com_ports; - int enable_keyboard; - int enable_nvram; -}; - -#endif /* _SOUTHBRIDGE_DMP_VORTEX86EX */ diff --git a/src/southbridge/dmp/vortex86ex/hard_reset.c b/src/southbridge/dmp/vortex86ex/hard_reset.c deleted file mode 100644 index 9b9c426733..0000000000 --- a/src/southbridge/dmp/vortex86ex/hard_reset.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <reset.h> - -void hard_reset(void) -{ -} diff --git a/src/southbridge/dmp/vortex86ex/ide_sd_sata.c b/src/southbridge/dmp/vortex86ex/ide_sd_sata.c deleted file mode 100644 index 936505e436..0000000000 --- a/src/southbridge/dmp/vortex86ex/ide_sd_sata.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <delay.h> -#include <stdlib.h> -#include <string.h> -#include <arch/io.h> - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> - -/* Vortex86EX IDE to SD/STAT controller need to enable ATA decoder and - * setup timing. */ - -/* - * Primary ATA Timing Register (PATR) - Offset 40-41h - * Secondary ATA Timing Register (PATR) - Offset 42-43h - * - * Bit R/W Default Description - * 15 R/W 0h ATA Decode Enable. Decode the I/O addressing ranges assigned to this controller. - * 1: Enabled. - * 0: Disabled. - * 14 R/W 0b Device 1 ATA Timing Register Enable - * 1: Enable the device 1 ATA timing. - * 0: Disable the device 1 ATA timing - * 13-12 R/W 0h IORDY Sample Mode. Sets the setup time before IORDY are sampled. - * 00: PIO-0 - * 10: PIO-2, SW-2 - * 10: PIO-3, PIO-4, MW-1, MW-2 - * 11: Reserved - * 11-10 RO 0h Reserved - * 9-8 R/W 0h Recovery Mode. Sets the hold time after IORDY are sampled. - * 00: PIO-0, PIO-2, SW-2 - * 10: PIO-3, MW-1 - * 10: Reserved - * 11: PIO-4, MW-2 - * 7 R/W 0b DMA Timing Enable Only Select 1 - * 1: Enable the device timings for DMA operation for device 1 - * 0: Disable the device timings for DMA operation for device 1 - * 6 R/W 0b ATA/ATAPI Device Indicator 1 - * 1: Indicate presence od an ATA device - * 0: Indicate presence od an ATAPI device - * 5 R/W 0b IORDY Sample Point Enabled Select 1 - * 1: Enable IORDY sample for PIO transfers for device 1 - * 0: Disable IORDY sample for PIO transfers for device 1 - * 4 R/W 0b Fast Drive Timing Select 1 - * 1: Enable faster than PIO-0 timing modes for device 1 - * 0: Disable faster than PIO-0 timing modes for device 1 - * 3 R/W 0b DMA Timing Enable Only Select 0 - * 1: Enable the device timings for DMA operation for device 0 - * 0: Disable the device timings for DMA operation for device 0 - * 2 R/W 0b ATA/ATAPI Device Indicator 0 - * 1: Indicate presence od an ATA device - * 0: Indicate presence od an ATAPI device - * 1 R/W 0b IORDY Sample Point Enabled Select 0 - * 1: Enable IORDY sample for PIO transfers for device 0 - * 0: Disable IORDY sample for PIO transfers for device 0 - * 0 R/W 0b Fast Drive Timing Select 0 - * 1: Enable faster than PIO-0 timing modes for device 0 - * 0: Disable faster than PIO-0 timing modes for device 0 - * */ - -static void init_ide_ata_timing(struct device *dev) -{ - u16 ata_timing_pri, ata_timing_sec; - u32 ata_timing_reg32; - /* Primary channel is SD. */ -#if CONFIG_IDE1_ENABLE - ata_timing_pri = 0x8000; -#else - ata_timing_pri = 0x0000; // Disable this channel. -#endif - /* Secondary channel is SATA. */ -#if CONFIG_IDE2_ENABLE - ata_timing_sec = 0xa30f; // This setting value works well. -#else - ata_timing_sec = 0x0000; // Disable this channel. -#endif - ata_timing_reg32 = (ata_timing_sec << 16) | ata_timing_pri; - pci_write_config32(dev, 0x40, ata_timing_reg32); -#if CONFIG_IDE_NATIVE_MODE - /* Set both IDE channels to native mode. */ - u8 prog_if; - prog_if = pci_read_config8(dev, 0x09); - prog_if |= 5; - pci_write_config8(dev, 0x09, prog_if); -#endif - /* MMC function enable. */ - u32 sd_ctrl_reg; - sd_ctrl_reg = pci_read_config32(dev, 0x94); - sd_ctrl_reg |= 0x0200; - pci_write_config32(dev, 0x94, sd_ctrl_reg); - printk(BIOS_INFO, "Vortex86EX IDE controller ATA TIMING reg = %08x\n", ata_timing_reg32); -} - -static void setup_std_ide_compatible(struct device *dev) -{ -#if CONFIG_IDE_STANDARD_COMPATIBLE - // Misc Control Register (MCR) Offset 90h - // bit 0 = Vendor ID Access, bit 1 = Device ID Access. - u8 mcr; - u16 vendor = (u16) (CONFIG_IDE_COMPATIBLE_SELECTION >> 16); - u16 device = (u16) (CONFIG_IDE_COMPATIBLE_SELECTION & 0xffff); - // unlock vendor/device ID access bits. - mcr = pci_read_config8(dev, 0x90); - pci_write_config8(dev, 0x90, mcr | 3); - pci_write_config16(dev, 0x00, vendor); - pci_write_config16(dev, 0x02, device); - // restore lock bits. - pci_write_config8(dev, 0x90, mcr); -#endif -} - -static void vortex_ide_init(struct device *dev) -{ - if (dev->device == 0x1010) { - // This is SX/old DX IDE controller. - // Set IOCFG bit 15/13 : IDE Decoder Enable for Primary/Secondary channel. - u16 iocfg = 0xa000; - pci_write_config16(dev, 0x40, iocfg); - } else if (dev->device == 0x1011 || dev->device == 0x1012) { - // This is new DX/MX/MX+/DX2 IDE controller. - init_ide_ata_timing(dev); - setup_std_ide_compatible(dev); - } -} - -static struct device_operations vortex_ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vortex_ide_init, - .scan_bus = 0, -}; - -static const struct pci_driver vortex_ide_driver_1010 __pci_driver = { - .ops = &vortex_ide_ops, - .vendor = PCI_VENDOR_ID_RDC, - .device = 0x1010, -}; - -static const struct pci_driver vortex_ide_driver_1011 __pci_driver = { - .ops = &vortex_ide_ops, - .vendor = PCI_VENDOR_ID_RDC, - .device = 0x1011, -}; - -static const struct pci_driver vortex_ide_driver_1012 __pci_driver = { - .ops = &vortex_ide_ops, - .vendor = PCI_VENDOR_ID_RDC, - .device = 0x1012, -}; diff --git a/src/southbridge/dmp/vortex86ex/southbridge.c b/src/southbridge/dmp/vortex86ex/southbridge.c deleted file mode 100644 index 05702d1eb6..0000000000 --- a/src/southbridge/dmp/vortex86ex/southbridge.c +++ /dev/null @@ -1,632 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <pc80/mc146818rtc.h> -#include <pc80/keyboard.h> -#include <string.h> -#include <delay.h> -#include "arch/io.h" -#include "chip.h" -#include "southbridge.h" -#include "cpu/dmp/dmp_post_code.h" - -/* IRQ number to S/B PCI Interrupt routing table reg(0x58/0xb4) mapping table. */ -static const unsigned char irq_to_int_routing[16] = { - 0x0, 0x0, 0x0, 0x2, // IRQ0-2 is unmappable, IRQ3 = 2. - 0x4, 0x5, 0x7, 0x6, // IRQ4-7 = 4, 5, 7, 6. - 0x0, 0x1, 0x3, 0x9, // IRQ8 is unmappable, IRQ9-11 = 1, 3, 9. - 0xb, 0x0, 0xd, 0xf // IRQ12 = b, IRQ13 is unmappable, IRQ14-15 = d, f. -}; - -/* S/B PCI Interrupt routing table reg(0x58) field bit shift. */ -#define EHCIH_IRQ_SHIFT 28 -#define OHCII_IRQ_SHIFT 24 -#define MAC_IRQ_SHIFT 16 -#define RT3_IRQ_SHIFT 12 -#define RT2_IRQ_SHIFT 8 -#define RT1_IRQ_SHIFT 4 -#define RT0_IRQ_SHIFT 0 - -/* S/B Extend PCI Interrupt routing table reg(0xb4) field bit shift. */ -#define CAN_IRQ_SHIFT 28 -#define HDA_IRQ_SHIFT 20 -#define USBD_IRQ_SHIFT 16 -#define SIDE_IRQ_SHIFT 12 -#define PIDE_IRQ_SHIFT 8 - -/* S/B function 1 Extend PCI Interrupt routing table reg 2(0xb4) - * field bit shift. - */ -#define SPI1_IRQ_SHIFT 8 -#define MOTOR_IRQ_SHIFT 0 - -/* in-chip PCI device IRQs(0 for disabled). */ -#define EHCII_IRQ 5 -#define OHCII_IRQ 5 -#define MAC_IRQ 6 - -#define CAN_IRQ 10 -#define HDA_IRQ 7 -#define USBD_IRQ 6 -#define PIDE_IRQ 5 - -#define SPI1_IRQ 10 -#define I2C0_IRQ 10 -#define MOTOR_IRQ 11 - -/* RT0-3 IRQs. */ -#define RT3_IRQ 3 -#define RT2_IRQ 4 -#define RT1_IRQ 5 -#define RT0_IRQ 6 - -/* IDE legacy mode IRQs. */ -#define IDE1_LEGACY_IRQ 14 -#define IDE2_LEGACY_IRQ 15 - -/* Internal parallel port */ -#define LPT_INT_C 0 -#define LPT_INT_ACK_SET 0 -#define LPT_UE 1 -#define LPT_PDMAS 0 -#define LPT_DREQS 0 - -/* keyboard controller system flag timeout : 400 ms */ -#define KBC_TIMEOUT_SYS_FLAG 400 - -static u8 get_pci_dev_func(device_t dev) -{ - return PCI_FUNC(dev->path.pci.devfn); -} - -static void verify_dmp_keyboard_error(void) -{ - post_code(POST_DMP_KBD_FW_VERIFY_ERR); - die("Internal keyboard firmware verify error!\n"); -} - -static void upload_dmp_keyboard_firmware(struct device *dev) -{ - u32 reg_sb_c0; - u32 fwptr; - - // enable firmware uploading function by set bit 10. - post_code(POST_DMP_KBD_FW_UPLOAD); - reg_sb_c0 = pci_read_config32(dev, SB_REG_IPFCR); - pci_write_config32(dev, SB_REG_IPFCR, reg_sb_c0 | 0x400); - - outw(0, 0x62); // reset upload address to 0. - // upload 4096 bytes from 0xFFFFE000. - outsb(0x66, (u8 *) 0xffffe000, 4096); - // upload 4096 bytes from 0xFFFFC000. - outsb(0x66, (u8 *) 0xffffc000, 4096); - - outw(0, 0x62); // reset upload address to 0. - // verify 4096 bytes from 0xFFFFE000. - for (fwptr = 0xffffe000; fwptr < 0xfffff000; fwptr++) { - if (inb(0x66) != *(u8 *) fwptr) { - verify_dmp_keyboard_error(); - } - } - // verify 4096 bytes from 0xFFFFC000. - for (fwptr = 0xffffc000; fwptr < 0xffffd000; fwptr++) { - if (inb(0x66) != *(u8 *) fwptr) { - verify_dmp_keyboard_error(); - } - } - - // disable firmware uploading. - pci_write_config32(dev, SB_REG_IPFCR, reg_sb_c0 & ~0x400L); -} - -static int kbc_wait_system_flag(void) -{ - /* wait keyboard controller ready by checking system flag - * (status port bit 2). - */ - post_code(POST_DMP_KBD_CHK_READY); - u32 timeout; - for (timeout = KBC_TIMEOUT_SYS_FLAG; - timeout && ((inb(0x64) & 0x4) == 0); timeout--) - mdelay(1); - - if (!timeout) { - printk(BIOS_WARNING, "Keyboard controller system flag timeout\n"); - } - return !!timeout; -} - -static void pci_routing_fixup(struct device *dev) -{ - const unsigned slot[3] = { 0 }; - const unsigned char slot_irqs[1][4] = { - {RT0_IRQ, RT1_IRQ, RT2_IRQ, RT3_IRQ}, - }; - const int slot_num = 1; - int i; - u32 int_routing = 0; - u32 ext_int_routing = 0; - - /* assign PCI-e bridge (bus#0, dev#1, fn#0) IRQ to RT0. */ - pci_assign_irqs(0, 1, slot_irqs[0]); - - /* RT0 is enabled. */ - int_routing |= irq_to_int_routing[RT0_IRQ] << RT0_IRQ_SHIFT; - - /* assign PCI slot IRQs. */ - for (i = 0; i < slot_num; i++) { - pci_assign_irqs(1, slot[i], slot_irqs[i]); - } - - /* Read PCI slot IRQs to see if RT1-3 is used, and enables it */ - for (i = 0; i < slot_num; i++) { - unsigned int funct; - device_t pdev; - u8 irq; - - /* Each slot may contain up to eight functions. */ - for (funct = 0; funct < 8; funct++) { - pdev = dev_find_slot(1, (slot[i] << 3) + funct); - if (!pdev) - continue; - irq = pci_read_config8(pdev, PCI_INTERRUPT_LINE); - if (irq == RT1_IRQ) { - int_routing |= irq_to_int_routing[RT1_IRQ] << RT1_IRQ_SHIFT; - } else if (irq == RT2_IRQ) { - int_routing |= irq_to_int_routing[RT2_IRQ] << RT2_IRQ_SHIFT; - } else if (irq == RT3_IRQ) { - int_routing |= irq_to_int_routing[RT3_IRQ] << RT3_IRQ_SHIFT; - } - } - } - - /* Setup S/B PCI Interrupt routing table reg(0x58). */ - int_routing |= irq_to_int_routing[EHCII_IRQ] << EHCIH_IRQ_SHIFT; - int_routing |= irq_to_int_routing[OHCII_IRQ] << OHCII_IRQ_SHIFT; - int_routing |= irq_to_int_routing[MAC_IRQ] << MAC_IRQ_SHIFT; - pci_write_config32(dev, SB_REG_PIRQ_ROUTE, int_routing); - - /* Setup S/B PCI Extend Interrupt routing table reg(0xb4). */ - ext_int_routing |= irq_to_int_routing[CAN_IRQ] << CAN_IRQ_SHIFT; - ext_int_routing |= irq_to_int_routing[HDA_IRQ] << HDA_IRQ_SHIFT; - ext_int_routing |= irq_to_int_routing[USBD_IRQ] << USBD_IRQ_SHIFT; -#if CONFIG_IDE_NATIVE_MODE - /* IDE in native mode, only uses one IRQ. */ - ext_int_routing |= irq_to_int_routing[0] << SIDE_IRQ_SHIFT; - ext_int_routing |= irq_to_int_routing[PIDE_IRQ] << PIDE_IRQ_SHIFT; -#else - /* IDE in legacy mode, use IRQ 14, 15. */ - ext_int_routing |= irq_to_int_routing[IDE2_LEGACY_IRQ] << SIDE_IRQ_SHIFT; - ext_int_routing |= irq_to_int_routing[IDE1_LEGACY_IRQ] << PIDE_IRQ_SHIFT; -#endif - pci_write_config32(dev, SB_REG_EXT_PIRQ_ROUTE, ext_int_routing); - - /* Assign in-chip PCI device IRQs. */ - if (MAC_IRQ) { - unsigned char irqs[4] = { MAC_IRQ, 0, 0, 0 }; - pci_assign_irqs(0, 0x8, irqs); - } - if ((OHCII_IRQ != 0) && (EHCII_IRQ != 0)) { - unsigned char irqs[4] = { OHCII_IRQ, EHCII_IRQ, 0, 0 }; - pci_assign_irqs(0, 0xa, irqs); - } - if ((CONFIG_IDE_NATIVE_MODE != 0) && (PIDE_IRQ != 0)) { - /* IDE in native mode, setup PCI IRQ. */ - unsigned char irqs[4] = { PIDE_IRQ, 0, 0, 0 }; - pci_assign_irqs(0, 0xc, irqs); - } - if (CAN_IRQ) { - unsigned char irqs[4] = { CAN_IRQ, 0, 0, 0 }; - pci_assign_irqs(0, 0x11, irqs); - } - if (HDA_IRQ) { - unsigned char irqs[4] = { HDA_IRQ, 0, 0, 0 }; - pci_assign_irqs(0, 0xe, irqs); - } - if (USBD_IRQ) { - unsigned char irqs[4] = { USBD_IRQ, 0, 0, 0 }; - pci_assign_irqs(0, 0xf, irqs); - } -} - -static void vortex_sb_init(struct device *dev) -{ - u32 lpt_reg = 0; - -#if CONFIG_LPT_ENABLE - int ppmod = 0; -#if CONFIG_LPT_MODE_BPP - ppmod = 0; -#elif CONFIG_LPT_MODE_EPP_19_AND_SPP - ppmod = 1; -#elif CONFIG_LPT_MODE_ECP - ppmod = 2; -#elif CONFIG_LPT_MODE_ECP_AND_EPP_19 - ppmod = 3; -#elif CONFIG_LPT_MODE_SPP - ppmod = 4; -#elif CONFIG_LPT_MODE_EPP_17_AND_SPP - ppmod = 5; -#elif CONFIG_LPT_MODE_ECP_AND_EPP_17 - ppmod = 7; -#else -#error CONFIG_LPT_MODE error. -#endif - - /* Setup internal parallel port */ - lpt_reg |= (LPT_INT_C << 28); - lpt_reg |= (LPT_INT_ACK_SET << 27); - lpt_reg |= (ppmod << 24); - lpt_reg |= (LPT_UE << 23); - lpt_reg |= (LPT_PDMAS << 22); - lpt_reg |= (LPT_DREQS << 20); - lpt_reg |= (irq_to_int_routing[CONFIG_LPT_IRQ] << 16); - lpt_reg |= (CONFIG_LPT_IO << 0); -#endif // CONFIG_LPT_ENABLE - pci_write_config32(dev, SB_REG_IPPCR, lpt_reg); -} - -#define SETUP_GPIO_ADDR(n) \ - u32 cfg##n = (CONFIG_GPIO_P##n##_DIR_ADDR << 16) | (CONFIG_GPIO_P##n##_DATA_ADDR);\ - outl(cfg##n, base + 4 + (n * 4));\ - gpio_enable_mask |= (1 << n); - -#define INIT_GPIO(n) \ - outb(CONFIG_GPIO_P##n##_INIT_DIR, CONFIG_GPIO_P##n##_DIR_ADDR);\ - outb(CONFIG_GPIO_P##n##_INIT_DATA, CONFIG_GPIO_P##n##_DATA_ADDR); - -static void ex_sb_gpio_init(struct device *dev) -{ - const int base = 0xb00; - u32 gpio_enable_mask = 0; - /* S/B register 63h - 62h : GPIO Port Config IO Base Address */ - pci_write_config16(dev, SB_REG_GPIO_CFG_IO_BASE, base | 1); - /* Set GPIO port 0~9 base address. - * Config Base + 04h, 08h, 0ch... : GPIO port 0~9 data/dir decode addr. - * Bit 31-16 : DBA, GPIO direction base address. - * Bit 15-0 : DPBA, GPIO data port base address. - * */ -#if CONFIG_GPIO_P0_ENABLE - SETUP_GPIO_ADDR(0) -#endif -#if CONFIG_GPIO_P1_ENABLE - SETUP_GPIO_ADDR(1) -#endif -#if CONFIG_GPIO_P2_ENABLE - SETUP_GPIO_ADDR(2) -#endif -#if CONFIG_GPIO_P3_ENABLE - SETUP_GPIO_ADDR(3) -#endif -#if CONFIG_GPIO_P4_ENABLE - SETUP_GPIO_ADDR(4) -#endif -#if CONFIG_GPIO_P5_ENABLE - SETUP_GPIO_ADDR(5) -#endif -#if CONFIG_GPIO_P6_ENABLE - SETUP_GPIO_ADDR(6) -#endif -#if CONFIG_GPIO_P7_ENABLE - SETUP_GPIO_ADDR(7) -#endif -#if CONFIG_GPIO_P8_ENABLE - SETUP_GPIO_ADDR(8) -#endif -#if CONFIG_GPIO_P9_ENABLE - SETUP_GPIO_ADDR(9) -#endif - /* Enable GPIO port 0~9. */ - outl(gpio_enable_mask, base); - /* Set GPIO port 0-9 initial dir and data. */ -#if CONFIG_GPIO_P0_ENABLE - INIT_GPIO(0) -#endif -#if CONFIG_GPIO_P1_ENABLE - INIT_GPIO(1) -#endif -#if CONFIG_GPIO_P2_ENABLE - INIT_GPIO(2) -#endif -#if CONFIG_GPIO_P3_ENABLE - INIT_GPIO(3) -#endif -#if CONFIG_GPIO_P4_ENABLE - INIT_GPIO(4) -#endif -#if CONFIG_GPIO_P5_ENABLE - INIT_GPIO(5) -#endif -#if CONFIG_GPIO_P6_ENABLE - INIT_GPIO(6) -#endif -#if CONFIG_GPIO_P7_ENABLE - INIT_GPIO(7) -#endif -#if CONFIG_GPIO_P8_ENABLE - INIT_GPIO(8) -#endif -#if CONFIG_GPIO_P9_ENABLE - INIT_GPIO(9) -#endif - /* Disable GPIO Port Config IO Base Address. */ - pci_write_config16(dev, SB_REG_GPIO_CFG_IO_BASE, 0x0); -} - -static u32 make_uart_config(u16 base, u8 irq) -{ - u8 mapped_irq = irq_to_int_routing[irq]; - u32 cfg = 0; - cfg |= 1 << 23; // UE = enabled. - cfg |= (mapped_irq << 16); // UIRT. - cfg |= base; // UIOA. - return cfg; -} - -#define SETUP_UART(n) \ - uart_cfg = make_uart_config(CONFIG_UART##n##_IO, CONFIG_UART##n##_IRQ);\ - outl(uart_cfg, base + (n - 1) * 4); - -static void ex_sb_uart_init(struct device *dev) -{ - const int base = 0xc00; - u32 uart_cfg = 0; - /* S/B register 61h - 60h : UART Config IO Base Address */ - pci_write_config16(dev, SB_REG_UART_CFG_IO_BASE, base | 1); - /* setup UART */ -#if CONFIG_UART1_ENABLE - SETUP_UART(1) -#endif -#if CONFIG_UART2_ENABLE - SETUP_UART(2) -#endif -#if CONFIG_UART3_ENABLE - SETUP_UART(3) -#endif -#if CONFIG_UART4_ENABLE - SETUP_UART(4) -#endif -#if CONFIG_UART5_ENABLE - SETUP_UART(5) -#endif -#if CONFIG_UART6_ENABLE - SETUP_UART(6) -#endif -#if CONFIG_UART7_ENABLE - SETUP_UART(7) -#endif -#if CONFIG_UART8_ENABLE - SETUP_UART(8) -#endif -#if CONFIG_UART9_ENABLE - SETUP_UART(9) -#endif -#if CONFIG_UART10_ENABLE - SETUP_UART(10) -#endif - /* Keep UART Config I/O base address */ - //pci_write_config16(SB, SB_REG_UART_CFG_IO_BASE, 0x0); -} - -static void i2c_init(struct device *dev) -{ - u8 mapped_irq = irq_to_int_routing[I2C0_IRQ]; - u32 cfg = 0; - cfg |= 1 << 31; // UE = enabled. - cfg |= (mapped_irq << 16); // IIRT0. - cfg |= CONFIG_I2C_BASE; // UIOA. - pci_write_config32(dev, SB_REG_II2CCR, cfg); -} - -static int get_rtc_update_in_progress(void) -{ - if (cmos_read(RTC_REG_A) & RTC_UIP) - return 1; - return 0; -} - -static void unsafe_read_cmos_rtc(u8 rtc[7]) -{ - rtc[0] = cmos_read(RTC_CLK_ALTCENTURY); - rtc[1] = cmos_read(RTC_CLK_YEAR); - rtc[2] = cmos_read(RTC_CLK_MONTH); - rtc[3] = cmos_read(RTC_CLK_DAYOFMONTH); - rtc[4] = cmos_read(RTC_CLK_HOUR); - rtc[5] = cmos_read(RTC_CLK_MINUTE); - rtc[6] = cmos_read(RTC_CLK_SECOND); -} - -static void read_cmos_rtc(u8 rtc[7]) -{ - /* Read RTC twice and check update-in-progress flag, to make - * sure RTC is correct */ - u8 rtc_old[7], rtc_new[7]; - while (get_rtc_update_in_progress()) ; - unsafe_read_cmos_rtc(rtc_new); - do { - memcpy(rtc_old, rtc_new, 7); - while (get_rtc_update_in_progress()) ; - unsafe_read_cmos_rtc(rtc_new); - } while (memcmp(rtc_new, rtc_old, 7) != 0); -} - -/* - * Convert a number in decimal format into the BCD format. - * Return 255 if not a valid BCD value. - */ -static u8 bcd2dec(u8 bcd) -{ - u8 h, l; - h = bcd >> 4; - l = bcd & 0xf; - if (h > 9 || l > 9) - return 255; - return h * 10 + l; -} - -static void fix_cmos_rtc_time(void) -{ - /* Read RTC data. */ - u8 rtc[7]; - read_cmos_rtc(rtc); - - /* Convert RTC from BCD format to binary. */ - u8 bin_rtc[7]; - int i; - for (i = 0; i < 7; i++) { - bin_rtc[i] = bcd2dec(rtc[i]); - } - - /* If RTC date is invalid, fix it. */ - if (bin_rtc[0] > 99 || bin_rtc[1] > 99 || bin_rtc[2] > 12 || bin_rtc[3] > 31) { - /* Set PC compatible timing mode. */ - cmos_write(0x26, RTC_REG_A); - cmos_write(0x02, RTC_REG_B); - /* Now setup a default date 2008/08/08 08:08:08. */ - cmos_write(0x8, RTC_CLK_SECOND); - cmos_write(0x8, RTC_CLK_MINUTE); - cmos_write(0x8, RTC_CLK_HOUR); - cmos_write(0x6, RTC_CLK_DAYOFWEEK); /* Friday */ - cmos_write(0x8, RTC_CLK_DAYOFMONTH); - cmos_write(0x8, RTC_CLK_MONTH); - cmos_write(0x8, RTC_CLK_YEAR); - cmos_write(0x20, RTC_CLK_ALTCENTURY); - } -} - -static void vortex86_sb_set_io_resv(device_t dev, unsigned index, u32 base, u32 size) -{ - struct resource *res; - res = new_resource(dev, index); - res->base = base; - res->size = size; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void vortex86_sb_set_spi_flash_size(device_t dev, unsigned index, u32 flash_size) -{ - /* SPI flash is in topmost of 4G memory space */ - struct resource *res; - res = new_resource(dev, index); - res->base = 0x100000000LL - flash_size; - res->size = flash_size; - res->limit = 0xffffffffUL; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; -} - -static void vortex86_sb_read_resources(device_t dev) -{ - u32 flash_size = 8 * 1024 * 1024; - - pci_dev_read_resources(dev); - - if (dev->device == 0x6011) { - /* It is EX CPU southbridge */ - if (get_pci_dev_func(dev) != 0) { - /* only for function 0, skip function 1 */ - return; - } - /* default SPI flash ROM is 64MB */ - flash_size = 64 * 1024 * 1024; - } - - /* Reserve space for legacy I/O */ - vortex86_sb_set_io_resv(dev, 1, 0, 0x1000UL); - - /* Reserve space for flash */ - vortex86_sb_set_spi_flash_size(dev, 2, flash_size); - - /* Reserve space for I2C */ - vortex86_sb_set_io_resv(dev, 3, CONFIG_I2C_BASE, 8); -} - -static void southbridge_init_func1(struct device *dev) -{ - /* Handle S/B function 1 PCI IRQ routing. (SPI1/MOTOR) */ - u32 ext_int_routing2 = 0; - /* Setup S/B function 1 PCI Extend Interrupt routing table reg 2(0xb4). */ - ext_int_routing2 |= irq_to_int_routing[SPI1_IRQ] << SPI1_IRQ_SHIFT; - ext_int_routing2 |= irq_to_int_routing[MOTOR_IRQ] << MOTOR_IRQ_SHIFT; - pci_write_config32(dev, SB1_REG_EXT_PIRQ_ROUTE2, ext_int_routing2); - - /* Assign in-chip PCI device IRQs. */ - if ((SPI1_IRQ != 0) || (MOTOR_IRQ != 0)) { - unsigned char irqs[4] = { MOTOR_IRQ, SPI1_IRQ, 0, 0 }; - pci_assign_irqs(0, 0x10, irqs); - } -} - -static void southbridge_init(struct device *dev) -{ - /* Check it is function 0 or 1. (Same Vendor/Device ID) */ - if (get_pci_dev_func(dev) != 0) { - southbridge_init_func1(dev); - return; - } - upload_dmp_keyboard_firmware(dev); - vortex_sb_init(dev); - if (dev->device == 0x6011) { - ex_sb_gpio_init(dev); - ex_sb_uart_init(dev); - i2c_init(dev); - } - pci_routing_fixup(dev); - - fix_cmos_rtc_time(); - cmos_init(0); - /* Check keyboard controller ready. If timeout, reload firmware code - * and try again. - */ - u32 retries = 10; - while (!kbc_wait_system_flag()) { - if (!retries) { - post_code(POST_DMP_KBD_IS_BAD); - die("The keyboard timeout occurred too often. " - "Your CPU is probably defect. " - "Contact your dealer to replace it\n"); - } - upload_dmp_keyboard_firmware(dev); - retries--; - } - post_code(POST_DMP_KBD_IS_READY); - pc_keyboard_init(NO_AUX_DEVICE); -} - -static struct device_operations vortex_sb_ops = { - .read_resources = vortex86_sb_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = &southbridge_init, - .scan_bus = scan_lpc_bus, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver pci_driver_6011 __pci_driver = { - .ops = &vortex_sb_ops, - .vendor = PCI_VENDOR_ID_RDC, - .device = 0x6011, /* EX CPU S/B ID */ -}; - -struct chip_operations southbridge_dmp_vortex86ex_ops = { - CHIP_NAME("DMP Vortex86EX Southbridge") - .enable_dev = 0 -}; diff --git a/src/southbridge/dmp/vortex86ex/southbridge.h b/src/southbridge/dmp/vortex86ex/southbridge.h deleted file mode 100644 index c2b91027ae..0000000000 --- a/src/southbridge/dmp/vortex86ex/southbridge.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 DMP Electronics Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SOUTHBRIDGE_H -#define SOUTHBRIDGE_H - -#define SB PCI_DEV(0, 7, 0) -#define SB_REG_LPCCR 0x41 -#define SB_REG_FRCSCR 0x42 -#define SB_REG_PIRQ_ROUTE 0x58 -#define SB_REG_UART_CFG_IO_BASE 0x60 -#define SB_REG_GPIO_CFG_IO_BASE 0x62 -#define SB_REG_CS_BASE0 0x90 -#define SB_REG_CS_BASE_MASK0 0x94 -#define SB_REG_CS_BASE1 0x98 -#define SB_REG_CS_BASE_MASK1 0x9c -#define SB_REG_IPPCR 0xb0 -#define SB_REG_EXT_PIRQ_ROUTE 0xb4 -#define SB_REG_OCDCR 0xbc -#define SB_REG_IPFCR 0xc0 -#define SB_REG_FRWPR 0xc4 -#define SB_REG_STRAP 0xce -#define SB_REG_II2CCR 0xd4 - -#define SB1 PCI_DEV(0, 7, 1) -#define SB1_REG_EXT_PIRQ_ROUTE2 0xb4 - -#define SYSTEM_CTL_PORT 0x92 - -#endif /* SOUTHBRIDGE_H */ |