diff options
Diffstat (limited to 'src/southbridge')
-rw-r--r-- | src/southbridge/intel/bd82x6x/pch.h | 2 | ||||
-rw-r--r-- | src/southbridge/intel/bd82x6x/sata.c | 49 |
2 files changed, 46 insertions, 5 deletions
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h index beed63a20e..7e67e3bbe6 100644 --- a/src/southbridge/intel/bd82x6x/pch.h +++ b/src/southbridge/intel/bd82x6x/pch.h @@ -196,6 +196,8 @@ int smbus_read_byte(unsigned device, unsigned address); #define PCB1 (1 << 1) #define PCB0 (1 << 0) +#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ +#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ #define SATA_SP 0xd0 /* Scratchpad */ /* SATA IOBP Registers */ diff --git a/src/southbridge/intel/bd82x6x/sata.c b/src/southbridge/intel/bd82x6x/sata.c index 2e4115882b..fb29d73509 100644 --- a/src/southbridge/intel/bd82x6x/sata.c +++ b/src/southbridge/intel/bd82x6x/sata.c @@ -27,6 +27,18 @@ typedef struct southbridge_intel_bd82x6x_config config_t; +static inline u32 sir_read(struct device *dev, int idx) +{ + pci_write_config32(dev, SATA_SIRI, idx); + return pci_read_config32(dev, SATA_SIRD); +} + +static inline void sir_write(struct device *dev, int idx, u32 value) +{ + pci_write_config32(dev, SATA_SIRI, idx); + pci_write_config32(dev, SATA_SIRD, value); +} + static void sata_init(struct device *dev) { u32 reg32; @@ -34,10 +46,10 @@ static void sata_init(struct device *dev) /* Get the chip configuration */ config_t *config = dev->chip_info; - printk(BIOS_DEBUG, "pch_sata: initializing...\n"); + printk(BIOS_DEBUG, "SATA: Initializing...\n"); if (config == NULL) { - printk(BIOS_ERR, "pch_sata: error: device not in devicetree.cb!\n"); + printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); return; } @@ -47,7 +59,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, PCI_COMMAND, 0x0007); if (config->ide_legacy_combined) { - printk(BIOS_DEBUG, "SATA controller in combined mode.\n"); + printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n"); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); @@ -85,7 +97,7 @@ static void sata_init(struct device *dev) } else if(config->sata_ahci) { u32 abar; - printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); + printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); /* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ @@ -137,7 +149,7 @@ static void sata_init(struct device *dev) reg32 &= ~0x00000005; write32(abar + 0xa0, reg32); } else { - printk(BIOS_DEBUG, "SATA controller in plain mode.\n"); + printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); @@ -191,6 +203,33 @@ static void sata_init(struct device *dev) if (config->sata_port1_gen3_tx) pch_iobp_update(SATA_IOBP_SP1G3IR, 0, config->sata_port1_gen3_tx); + + /* Additional Programming Requirements */ + sir_write(dev, 0x04, 0x00001600); + sir_write(dev, 0x28, 0xa0000033); + reg32 = sir_read(dev, 0x54); + reg32 &= 0xff000000; + reg32 |= 0x5555aa; + sir_write(dev, 0x54, reg32); + sir_write(dev, 0x64, 0xcccc8484); + reg32 = sir_read(dev, 0x68); + reg32 &= 0xffff0000; + reg32 |= 0xcccc; + sir_write(dev, 0x68, reg32); + reg32 = sir_read(dev, 0x78); + reg32 &= 0x0000ffff; + reg32 |= 0x88880000; + sir_write(dev, 0x78, reg32); + sir_write(dev, 0x84, 0x001c7000); + sir_write(dev, 0x88, 0x88338822); + sir_write(dev, 0xa0, 0x001c7000); + // a4 + sir_write(dev, 0xc4, 0x0c0c0c0c); + sir_write(dev, 0xc8, 0x0c0c0c0c); + sir_write(dev, 0xd4, 0x10000000); + + pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000); + pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100); } static void sata_enable(device_t dev) |