diff options
Diffstat (limited to 'src/superio/fintek/f81803a/f81803a_hwm.h')
| -rw-r--r-- | src/superio/fintek/f81803a/f81803a_hwm.h | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/src/superio/fintek/f81803a/f81803a_hwm.h b/src/superio/fintek/f81803a/f81803a_hwm.h new file mode 100644 index 0000000000..a7647057d1 --- /dev/null +++ b/src/superio/fintek/f81803a/f81803a_hwm.h @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Richard Spiegel <richard.spiegel@silverbackltd.com> + * Copyright (C) 2019 Silverback ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SUPERIO_FINTEK_F81803_HWM_H +#define SUPERIO_FINTEK_F81803_HWM_H + +#define TP_SENSOR_TYPE 0x6b +#define TP_SENSOR1_TYPE_SHIFT 1 +#define TP_SENSOR2_TYPE_SHIFT 2 +#define TP_SENSOR_TYPE_MASK 0x01 +#define TP_DIODE_STATUS 0x6f +#define TP_MMX_OPEN 0x40 +#define TP_PECI_OPEN 0x20 +#define TP_TSI_OPEN 0x10 +#define TP_EXTERNAL_SENSOR2_OPEN 0x04 +#define TP_EXTERNAL_SENSOR1_OPEN 0x02 + +#define FAN_TYPE_REG 0x94 +#define FAN_TYPE_SHIFT(fan) ((fan - 1) * 2) +#define FAN_TYPE_MASK 0x03 +#define FAN_MODE_REG 0x96 + /* FUNC_PROG_SEL = 0 */ +#define FAN_MODE_SHIFT(fan) ((fan - 1) * 4) +#define FAN_MODE_MASK 0x07 + /* FUNC_PROG_SEL = 1 */ +#define FAN1_ADJ_SEL_SHIFT 0 +#define FAN1_ADJ_SEL_MASK 0x07 +#define FAN_FREQ_SEL_ADD_SHIFT(fan) (fan + 2) +#define FAN_UP_RATE_REG 0x9a +#define FAN_RATE_SHIFT(fan) ((fan - 1) * 2) +#define FAN_RATE_MASK 0x03 +#define FAN_DOWN_RATE_REG 0x9b +#define FAN_DOWN_RATE_DIFF_FROM_UP_SHIFT 7 /* FUNC_PROG_SEL = 1 */ +#define FAN_DIRECT_LOAD_EN_SHIFT 6 /* FUNC_PROG_SEL = 1 */ +#define FAN_FAULT_TIME_REG 0x9f +#define FAN_FUNC_PROG_SEL_SHIFT 7 + +#define FAN_BOUND_TEMP 0xa6 /* 4 temperatures */ +#define FAN_SECTION_SPEED 0xaa /* 5 sections */ +#define FAN_TMP_MAPPING 0xaf +#define FAN_TEMP_SEL_HIGH_SHIFT 7 +#define FAN_PWM_FREQ_SEL_SHIFT 6 +#define FAN_INTERPOLATION_SHIFT 4 +#define FAN_JUMP_UP_SHIFT 3 +#define FAN_JUMP_DOWN_SHIFT 2 +#define FAN_TEMP_SEL_LOW_SHIFT 0 +#define FAN_TEMP_SEL_LOW_MASK 0x03 +#define FAN_BIT_MASK 0x01 + +#define FAN_ADJUST(fan, start) (((fan - 1) * 0x10) + start) + +#define STATUS_INVALID_VALUE -1 +#define STATUS_INVALID_ORDER -2 + +#define FIRST_FAN 1 +#define LAST_FAN 2 +#define MAX_DUTY 100 + +#endif /* SUPERIO_FINTEK_F81803_HWM_H */ |