diff options
Diffstat (limited to 'src/superio/ite/it8705f/it8705f_early_serial.c')
-rw-r--r-- | src/superio/ite/it8705f/it8705f_early_serial.c | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/src/superio/ite/it8705f/it8705f_early_serial.c b/src/superio/ite/it8705f/it8705f_early_serial.c new file mode 100644 index 0000000000..d80e2ed59b --- /dev/null +++ b/src/superio/ite/it8705f/it8705f_early_serial.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/romcc_io.h> +#include "it8705f.h" + +/* The base address is 0x2e or 0x4e, depending on config bytes. */ +#define SIO_BASE 0x2e +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global Configuration Registers. */ +#define IT8705F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8705F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8705F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ + +/* WTF? 0x23 and 0x24 are swapped here (when compared to other IT87xx). */ +#define IT8705F_CONFIG_REG_CLOCKSEL 0x24 /* Clock Selection. */ +#define IT8705F_CONFIG_REG_SWSUSP 0x23 /* Software Suspend, Flash I/F. */ + +#define IT8705F_CONFIGURATION_PORT 0x2e /* Write-only. */ + +/* The content of IT8705F_CONFIG_REG_LDN (index 0x07) must be set to the + * LDN the register belongs to, before you can access the register. */ +static void it8705f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(IT8705F_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +/* Enable the peripheral devices on the IT8705F Super IO chip. */ +static void it8705f_enable_serial(device_t dev, unsigned iobase) +{ + /* (1) Enter the configuration state (MB PnP mode). */ + + /* Perform MB PnP setup to put the SIO chip at 0x2e. */ + /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ + /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ + outb(0x87, IT8705F_CONFIGURATION_PORT); + outb(0x01, IT8705F_CONFIGURATION_PORT); + outb(0x55, IT8705F_CONFIGURATION_PORT); + outb(0x55, IT8705F_CONFIGURATION_PORT); + + /* (2) Modify the data of configuration registers. */ + + /* Select the chip to configure (if there's more than one). + * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + * If this register is not written, both chips are configured. */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CONFIGSEL, 0x00); */ + + /* Enable all devices. */ + it8705f_sio_write(IT8705F_FDC, 0x30, 0x1); /* Floppy */ + it8705f_sio_write(IT8705F_SP1, 0x30, 0x1); /* Serial port 1 */ + it8705f_sio_write(IT8705F_SP2, 0x30, 0x1); /* Serial port 2 */ + it8705f_sio_write(IT8705F_PP, 0x30, 0x1); /* Parallel port */ + it8705f_sio_write(IT8705F_EC, 0x30, 0x1); /* Environment controller */ + /* GPIO */ + it8705f_sio_write(IT8705F_GAME, 0x30, 0x1); /* GAME port */ + it8705f_sio_write(IT8705F_IR, 0x30, 0x1); /* Consumer IR */ + it8705f_sio_write(IT8705F_MIDI, 0x30, 0x1); /* MIDI port */ + + /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CLOCKSEL, 0x00); */ + + /* Clear software suspend mode (clear bit 0). TODO: Needed? */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_SWSUSP, 0x00); */ + + /* (3) Exit the configuration state (MB PnP mode). */ + it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CC, 0x02); +} + |