summaryrefslogtreecommitdiff
path: root/src/superio
diff options
context:
space:
mode:
Diffstat (limited to 'src/superio')
-rw-r--r--src/superio/ite/Kconfig2
-rw-r--r--src/superio/ite/Makefile.inc1
-rw-r--r--src/superio/ite/it8772f/Makefile.inc21
-rw-r--r--src/superio/ite/it8772f/acpi/superio.asl299
-rw-r--r--src/superio/ite/it8772f/chip.h57
-rw-r--r--src/superio/ite/it8772f/early_serial.c131
-rw-r--r--src/superio/ite/it8772f/it8772f.h120
-rw-r--r--src/superio/ite/it8772f/superio.c250
8 files changed, 881 insertions, 0 deletions
diff --git a/src/superio/ite/Kconfig b/src/superio/ite/Kconfig
index d045bf46b0..5d92a96892 100644
--- a/src/superio/ite/Kconfig
+++ b/src/superio/ite/Kconfig
@@ -38,3 +38,5 @@ config SUPERIO_ITE_IT8718F
bool
config SUPERIO_ITE_IT8721F
bool
+config SUPERIO_ITE_IT8772F
+ bool
diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc
index 1e734fec91..fa44ff8ed2 100644
--- a/src/superio/ite/Makefile.inc
+++ b/src/superio/ite/Makefile.inc
@@ -25,3 +25,4 @@ subdirs-y += it8712f
subdirs-y += it8716f
subdirs-y += it8718f
subdirs-y += it8721f
+subdirs-y += it8772f
diff --git a/src/superio/ite/it8772f/Makefile.inc b/src/superio/ite/it8772f/Makefile.inc
new file mode 100644
index 0000000000..d001c61153
--- /dev/null
+++ b/src/superio/ite/it8772f/Makefile.inc
@@ -0,0 +1,21 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+ramstage-$(CONFIG_SUPERIO_ITE_IT8772F) += superio.c
diff --git a/src/superio/ite/it8772f/acpi/superio.asl b/src/superio/ite/it8772f/acpi/superio.asl
new file mode 100644
index 0000000000..5bb45fad9a
--- /dev/null
+++ b/src/superio/ite/it8772f/acpi/superio.asl
@@ -0,0 +1,299 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Scope is \_SB.PCI0.LPCB
+
+Device (SIO) {
+ Name (_ADR, 0x2E)
+ OperationRegion (SIOA, SystemIO, 0x2E, 0x02)
+ Field (SIOA, ByteAcc, NoLock, Preserve)
+ {
+ SI2E, 8,
+ SI2F, 8,
+ }
+
+ IndexField (SI2E, SI2F, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x02),
+ SCNT, 8, /* Configure Control */
+ Offset (0x07),
+ SLDN, 8, /* Logical Device Number */
+ Offset (0x30),
+ SACT, 8, /* Activate */
+ Offset (0x60),
+ IO0H, 8, /* Base Address 0 MSB */
+ IO0L, 8, /* Base Address 0 LSB */
+ Offset (0x62),
+ IO1H, 8, /* Base Address 1 MSB */
+ IO1L, 8, /* Base Address 1 LSB */
+ Offset (0x70),
+ IQ00, 8, /* Interrupt Select */
+ }
+
+ Name (SFDC, 0) /* Floppy Disk Controller */
+ Name (SSP1, 1) /* Serial Port 1 */
+ Name (SENV, 4) /* Environment Controller */
+ Name (SKBC, 5) /* Keyboard */
+ Name (SKBM, 6) /* Mouse */
+ Name (SGPI, 7) /* GPIO */
+ Name (SINF, 10) /* Consumer IR */
+
+ Method (ENTR, 0, NotSerialized)
+ {
+ Store (0x87, SI2E)
+ Store (0x01, SI2E)
+ Store (0x55, SI2E)
+ Store (0x55, SI2E)
+ }
+
+ Method (EXIT, 0, NotSerialized)
+ {
+ Store (0x02, SCNT)
+ }
+
+ /* Parse activate register for an LDN */
+ Method (ISEN, 1, NotSerialized)
+ {
+ ENTR ()
+ Store (Arg0, SLDN)
+ Store (SACT, Local0)
+ EXIT ()
+
+ /* Check if it exists */
+ If (LEqual (Local0, 0xFF))
+ {
+ Return (0x00)
+ }
+
+ /* Check if activated */
+ If (LEqual (Local0, One))
+ {
+ Return (0x0F)
+ }
+ Else
+ {
+ Return (0x0D)
+ }
+ }
+
+ /* Enable an LDN via the activate register */
+ Method (SENA, 1, NotSerialized)
+ {
+ ENTR ()
+ Store (Arg0, SLDN)
+ Store (One, SACT)
+ EXIT ()
+ }
+
+ /* Disable an LDN via the activate register */
+ Method (SDIS, 1, NotSerialized)
+ {
+ ENTR ()
+ Store (Arg0, SLDN)
+ Store (Zero, SACT)
+ EXIT ()
+ }
+
+#ifdef SIO_ENABLE_ENVC
+ Device (ENVC) {
+ Name (_HID, EISAID ("PNP0C02"))
+ Name (_UID, 10)
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SENV))
+ }
+
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, SIO_ENVC_IO0, SIO_ENVC_IO0, 0x08, 0x08)
+ IO (Decode16, SIO_ENVC_IO1, SIO_ENVC_IO1, 0x04, 0x04)
+ })
+
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, SIO_ENVC_IO0, SIO_ENVC_IO0, 0x08, 0x08)
+ IO (Decode16, SIO_ENVC_IO1, SIO_ENVC_IO1, 0x04, 0x04)
+ })
+
+ OperationRegion (ECAP, SystemIO, SIO_ENVC_IO0, 0x07)
+ Field (ECAP, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x05),
+ ECAI, 8, // Address Index Register
+ ECAD, 8, // Address Data Register
+ }
+
+ // Registers for thermal zone implementations
+ IndexField (ECAI, ECAD, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x29),
+ TIN1, 8, // TMPIN1 Reading
+ TIN2, 8, // TMPIN2 Reading
+ TIN3, 8, // TMPIN3 Reading
+ Offset (0x6b),
+ F2PS, 8, // FAN2 PWM Setting
+ Offset (0x73),
+ F3PS, 8, // FAN3 PWM Setting
+ }
+ }
+#endif
+
+#ifdef SIO_ENABLE_GPIO
+ Device (GPIO) {
+ Name (_HID, EISAID ("PNP0C02"))
+ Name (_UID, 11)
+
+ Method (_STA, 0, NotSerialized) {
+ Return (0x0F)
+ }
+
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, SIO_GPIO_IO0, SIO_GPIO_IO0, 0x01, 0x01)
+ IO (Decode16, SIO_GPIO_IO1, SIO_GPIO_IO1, 0x08, 0x08)
+ })
+
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, SIO_GPIO_IO0, SIO_GPIO_IO0, 0x01, 0x01)
+ IO (Decode16, SIO_GPIO_IO1, SIO_GPIO_IO1, 0x08, 0x08)
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_COM1
+ Device (COM1) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 1)
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SSP1))
+ }
+
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_PS2K
+ Device (PS2K) // Keyboard
+ {
+ Name (_HID, EISAID("PNP0303"))
+ Name (_CID, EISAID("PNP030B"))
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SKBC))
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x60, 0x60, 0x01, 0x01)
+ IO (Decode16, 0x64, 0x64, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x60, 0x60, 0x01, 0x01)
+ IO (Decode16, 0x64, 0x64, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_PS2M
+ Device (PS2M) // Mouse
+ {
+ Name (_HID, EISAID("PNP0F13"))
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SKBM))
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ IRQNoFlags () {12}
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQNoFlags () {12}
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_FDC0
+ Device (FDC0) // Floppy controller
+ {
+ Name (_HID, EISAID ("PNP0700"))
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SFDC))
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
+ IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
+ IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_INFR
+ Device (INFR) // Infrared controller
+ {
+ Name (_HID, EISAID ("PNP0510"))
+
+ Method (_STA, 0, NotSerialized) {
+ Return (ISEN (SINF))
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, SIO_INFR_IO0, SIO_INFR_IO0, 0x08, 0x08)
+ IRQNoFlags () { SIO_INFR_IRQ }
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ IO (Decode16, SIO_INFR_IO0, SIO_INFR_IO0, 0x08, 0x08)
+ IRQNoFlags () { SIO_INFR_IRQ }
+ })
+ }
+#endif
+}
diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
new file mode 100644
index 0000000000..e91f6fac53
--- /dev/null
+++ b/src/superio/ite/it8772f/chip.h
@@ -0,0 +1,57 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SUPERIO_ITE_IT8772F_CHIP_H
+#define SUPERIO_ITE_IT8772F_CHIP_H
+
+#include <device/device.h>
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+extern struct chip_operations superio_ite_it8772f_ops;
+
+struct superio_ite_it8772f_config {
+ struct pc_keyboard keyboard;
+
+ /* GPIO SimpleIO register values via devicetree.cb */
+ u8 gpio_set1;
+ u8 gpio_set2;
+ u8 gpio_set3;
+ u8 gpio_set4;
+ u8 gpio_set5;
+ u8 gpio_set6;
+
+ u8 skip_keyboard;
+
+ /*
+ * Enable external temperature sensor to use PECI GetTemp()
+ * command and store in register TMPIN 1, 2, or 3.
+ */
+ u8 peci_tmpin;
+
+ /*
+ * Enable a FAN for sofware control.
+ */
+ u8 fan1_enable;
+ u8 fan2_enable;
+ u8 fan3_enable;
+};
+
+#endif
diff --git a/src/superio/ite/it8772f/early_serial.c b/src/superio/ite/it8772f/early_serial.c
new file mode 100644
index 0000000000..0721060cac
--- /dev/null
+++ b/src/superio/ite/it8772f/early_serial.c
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/romcc_io.h>
+#include <device/pnp_def.h>
+#include "it8772f.h"
+
+/* The base address is 0x2e or 0x4e, depending on config bytes. */
+#define SIO_BASE IT8772F_BASE
+#define SIO_INDEX SIO_BASE
+#define SIO_DATA (SIO_BASE + 1)
+
+/* Global configuration registers. */
+#define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
+#define IT8772F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */
+#define IT8772F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */
+#define IT8772F_CONFIG_REG_MFC 0x2a /* Multi-function control */
+#define IT8772F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */
+
+u8 it8772f_sio_read(u8 index)
+{
+ outb(index, SIO_BASE);
+ return inb(SIO_DATA);
+}
+
+void it8772f_sio_write(u8 index, u8 value)
+{
+ outb(index, SIO_BASE);
+ outb(value, SIO_DATA);
+}
+
+static void it8772f_enter_conf(void)
+{
+ u16 port = SIO_BASE;
+
+ outb(0x87, port);
+ outb(0x01, port);
+ outb(0x55, port);
+ outb((port == 0x4e) ? 0xaa : 0x55, port);
+}
+
+static void it8772f_exit_conf(void)
+{
+ it8772f_sio_write(IT8772F_CONFIG_REG_CC, 0x02);
+}
+
+/* Select 24MHz CLKIN (48MHz is the default). */
+void it8772f_24mhz_clkin(void)
+{
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, 0x00);
+ it8772f_sio_write(IT8772F_CONFIG_REG_CLOCKSEL, 0x1);
+ it8772f_exit_conf();
+}
+
+/*
+ * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off.
+ *
+ * Enable 3VSBSW#. (For System Suspend-to-RAM)
+ * 0: 3VSBSW# will be always inactive.
+ * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#.
+ */
+void it8772f_enable_3vsbsw(void)
+{
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
+ it8772f_sio_write(IT8772F_CONFIG_REG_MFC, 0x80);
+ it8772f_exit_conf();
+}
+
+void it8772f_kill_watchdog(void)
+{
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
+ it8772f_sio_write(IT8772F_CONFIG_REG_WATCHDOG, 0x00);
+ it8772f_exit_conf();
+}
+
+/* Enable the serial port(s). */
+void it8772f_enable_serial(device_t dev, u16 iobase)
+{
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, dev & 0xff);
+ it8772f_sio_write(PNP_IDX_IO0, (iobase >> 8) & 0xff);
+ it8772f_sio_write(PNP_IDX_IO0+1, iobase & 0xff);
+ it8772f_sio_write(PNP_IDX_EN, 1);
+ it8772f_exit_conf();
+}
+
+/* Set AC resume to be up to the Southbridge */
+void it8772f_ac_resume_southbridge(void)
+{
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_EC);
+ it8772f_sio_write(0xf4, 0x60);
+ it8772f_exit_conf();
+}
+
+/* Configure a set of GPIOs */
+void it8772f_gpio_setup(int set, u8 select, u8 polarity, u8 pullup,
+ u8 output, u8 enable)
+{
+ set--; /* Set 1 is offset 0 */
+ it8772f_enter_conf();
+ it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
+ if (set < 5) {
+ it8772f_sio_write(GPIO_REG_SELECT(set), select);
+ it8772f_sio_write(GPIO_REG_ENABLE(set), enable);
+ it8772f_sio_write(GPIO_REG_POLARITY(set), polarity);
+ }
+ it8772f_sio_write(GPIO_REG_OUTPUT(set), output);
+ it8772f_sio_write(GPIO_REG_PULLUP(set), pullup);
+ it8772f_exit_conf();
+}
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
new file mode 100644
index 0000000000..1ec82e1fd5
--- /dev/null
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SUPERIO_ITE_IT8772F_IT8772F_H
+#define SUPERIO_ITE_IT8772F_IT8772F_H
+
+#define IT8772F_BASE 0x2e
+
+#define IT8772F_FDC 0x00 /* Floppy disk controller */
+#define IT8772F_SP1 0x01 /* Com1 */
+#define IT8772F_EC 0x04 /* Environment controller */
+#define IT8772F_KBCK 0x05 /* Keyboard */
+#define IT8772F_KBCM 0x06 /* Mouse */
+#define IT8772F_GPIO 0x07 /* GPIO */
+#define IT8772F_IR 0x0a /* Consumer IR */
+
+/* Environmental Controller interface */
+#define IT8772F_INTERFACE_SELECT 0x0a
+#define IT8772F_INTERFACE_PSEUDO_EOC (1 << 7)
+#define IT8772F_INTERFACE_SMB_ENABLE (1 << 6)
+#define IT8772F_INTERFACE_SEL_DISABLE (0 << 4)
+#define IT8772F_INTERFACE_SEL_SST_SLAVE (1 << 4)
+#define IT8772F_INTERFACE_SEL_PECI (2 << 4)
+#define IT8772F_INTERFACE_SEL_SST_HOST (3 << 4)
+#define IT8772F_INTERFACE_CLOCK_32MHZ (0 << 3)
+#define IT8772F_INTERFACE_CLOCK_24MHZ (1 << 3)
+#define IT8772F_INTERFACE_SPEED_TOLERANCE (1 << 2)
+#define IT8772F_INTERFACE_PECI_AWFCS (1 << 0)
+#define IT8772F_FAN_TAC2_READ 0x0e
+#define IT8772F_FAN_TAC3_READ 0x0f
+#define IT8772F_FAN_MAIN_CTL 0x13
+#define IT8772F_FAN_MAIN_CTL_TAC_SMART(x) (1 << ((x)-1))
+#define IT8772F_FAN_MAIN_CTL_TAC_EN(x) (1 << ((x)+3))
+#define IT8772F_FAN_CTL_MODE 0x14
+#define IT8772F_FAN_CTL_ON(x) (1 << ((x)-1))
+#define IT8772F_FAN_PWM_MIN_DUTY (1 << 3)
+#define IT8772F_FAN_PWM_CLOCK_48MHZ (0 << 4)
+#define IT8772F_FAN_PWM_CLOCK_24MHZ (1 << 4)
+#define IT8772F_FAN_PWM_CLOCK_8MHZ (3 << 4)
+#define IT8772F_FAN_PWM_CLOCK_6MHZ (4 << 4)
+#define IT8772F_FAN_PWM_CLOCK_3MHZ (5 << 4)
+#define IT8772F_FAN_PWM_CLOCK_1_5MHZ (6 << 4)
+#define IT8772F_FAN_PWM_CLOCK_51KHZ (7 << 4)
+#define IT8772F_FAN_CTL_POLARITY_LOW (0 << 7)
+#define IT8772F_FAN_CTL_POLARITY_HIGH (1 << 7)
+#define IT8772F_FAN_CTL2_PWM_MODE 0x16
+#define IT8772F_FAN_CTL3_PWM_MODE 0x17
+#define IT8772F_FAN_CTL_PWM_MODE_SOFTWARE (0 << 7)
+#define IT8772F_FAN_CTL_PWM_MODE_AUTOMATIC (1 << 7)
+#define IT8772F_ADC_TEMP_CHANNEL_ENABLE 0x51
+#define IT8772F_FAN_CTL2_PWM_START 0x6b
+#define IT8772F_FAN_CTL2_AUTO_MODE 0x6c
+#define IT8772F_FAN_CTL3_PWM_START 0x73
+#define IT8772F_FAN_CTL3_AUTO_MODE 0x74
+#define IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS (0 << 7)
+#define IT8772F_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7)
+#define IT8772F_EXTEMP_STATUS 0x88
+#define IT8772F_EXTEMP_ADDRESS 0x89
+#define IT8772F_EXTEMP_WRITE_LENGTH 0x8a
+#define IT8772F_EXTEMP_READ_LENGTH 0x8b
+#define IT8772F_EXTEMP_COMMAND 0x8c
+#define IT8772F_EXTEMP_WRITE_DATA_2 0x8d
+#define IT8772F_EXTEMP_CONTROL 0x8e
+#define IT8772F_EXTEMP_CONTROL_AUTO_32HZ (0 << 6)
+#define IT8772F_EXTEMP_CONTROL_AUTO_16HZ (1 << 6)
+#define IT8772F_EXTEMP_CONTROL_AUTO_8HZ (2 << 6)
+#define IT8772F_EXTEMP_CONTROL_AUTO_4HZ (3 << 6)
+#define IT8772F_EXTEMP_CONTROL_AUTO_START (1 << 5)
+#define IT8772F_EXTEMP_CONTROL_AUTO_ABORT (1 << 4)
+#define IT8772F_EXTEMP_CONTROL_AUTO_TWO_DOMAIN (1 << 3)
+#define IT8772F_EXTEMP_CONTROL_CONTENTION (1 << 2)
+#define IT8772F_EXTEMP_CONTROL_SST_IDLE_HIGH (1 << 1)
+#define IT8772F_EXTEMP_CONTROL_START (1 << 0)
+
+/* Standard PECI GetTemp */
+#define PECI_CLIENT_ADDRESS 0x30
+#define PECI_GETTEMP_COMMAND 0x01
+#define PECI_GETTEMP_WRITE_LENGTH 0x01
+#define PECI_GETTEMP_READ_LENGTH 0x02
+
+/* GPIO interface */
+#define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8
+#define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9
+
+#define GPIO_REG_SELECT(x) (0x25 + (x))
+#define GPIO_REG_POLARITY(x) (0xb0 + (x))
+#define GPIO_REG_PULLUP(x) (0xb8 + (x))
+#define GPIO_REG_ENABLE(x) (0xc0 + (x))
+#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
+
+#ifndef __ROMCC__
+u8 it8772f_sio_read(u8 index);
+void it8772f_sio_write(u8 index, u8 value);
+void it8772f_enable_serial(device_t dev, u16 iobase);
+void it8772f_kill_watchdog(void);
+void it8772f_24mhz_clkin(void);
+void it8772f_enable_3vsbsw(void);
+void it8772f_ac_resume_southbridge(void);
+void it8772f_gpio_setup(int set, u8 func_select, u8 polarity, u8 pullup,
+ u8 output, u8 enable);
+#endif
+
+#endif
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
new file mode 100644
index 0000000000..1361ef2deb
--- /dev/null
+++ b/src/superio/ite/it8772f/superio.c
@@ -0,0 +1,250 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pnp.h>
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include <arch/io.h>
+#include <stdlib.h>
+#include "chip.h"
+#include "it8772f.h"
+
+static void pnp_enter_ext_func_mode(device_t dev)
+{
+ u16 port = dev->path.pnp.port;
+
+ outb(0x87, port);
+ outb(0x01, port);
+ outb(0x55, port);
+ outb((port == 0x4e) ? 0xaa : 0x55, port);
+}
+
+static void pnp_exit_ext_func_mode(device_t dev)
+{
+ pnp_write_config(dev, 0x02, 0x02);
+}
+
+static inline u8 it8772f_envc_read(struct resource *res, u8 addr)
+{
+ outb(addr, res->base + 5);
+ return inb(res->base + 6);
+}
+
+static inline void it8772f_envc_write(struct resource *res, u8 addr, u8 value)
+{
+ outb(addr, res->base + 5);
+ outb(value, res->base + 6);
+}
+
+/*
+ * Setup External Temperature to read via PECI into TMPINx register
+ */
+static void it8772f_enable_peci(struct resource *res, int tmpin)
+{
+ if (tmpin < 1 || tmpin > 3)
+ return;
+
+ /* Enable PECI interface */
+ it8772f_envc_write(res, IT8772F_INTERFACE_SELECT,
+ IT8772F_INTERFACE_SEL_PECI |
+ IT8772F_INTERFACE_SPEED_TOLERANCE);
+
+ /* Setup External Temperature using PECI GetTemp */
+ it8772f_envc_write(res, IT8772F_EXTEMP_ADDRESS,
+ PECI_CLIENT_ADDRESS);
+ it8772f_envc_write(res, IT8772F_EXTEMP_COMMAND,
+ PECI_GETTEMP_COMMAND);
+ it8772f_envc_write(res, IT8772F_EXTEMP_WRITE_LENGTH,
+ PECI_GETTEMP_WRITE_LENGTH);
+ it8772f_envc_write(res, IT8772F_EXTEMP_READ_LENGTH,
+ PECI_GETTEMP_READ_LENGTH);
+ it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL,
+ IT8772F_EXTEMP_CONTROL_AUTO_4HZ |
+ IT8772F_EXTEMP_CONTROL_AUTO_START);
+
+ /* External Temperature reported in TMPINx register */
+ it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+ (tmpin & 3) << 6);
+}
+
+/*
+ * Setup a FAN PWM interface for software control
+ */
+static void it8772f_enable_fan(struct resource *res, int fan)
+{
+ u8 reg;
+
+ if (fan < 1 || fan > 3)
+ return;
+
+ /* Enable 6MHz (23.43kHz PWM) active high output */
+ reg = it8772f_envc_read(res, IT8772F_FAN_CTL_MODE);
+ reg |= IT8772F_FAN_CTL_ON(fan) |
+ IT8772F_FAN_PWM_CLOCK_6MHZ |
+ IT8772F_FAN_CTL_POLARITY_HIGH;
+ it8772f_envc_write(res, IT8772F_FAN_CTL_MODE, reg);
+
+ /* Enable output in smart mode */
+ reg = it8772f_envc_read(res, IT8772F_FAN_MAIN_CTL);
+ reg |= IT8772F_FAN_MAIN_CTL_TAC_SMART(fan);
+ reg |= IT8772F_FAN_MAIN_CTL_TAC_EN(fan);
+ it8772f_envc_write(res, IT8772F_FAN_MAIN_CTL, reg);
+
+ switch (fan) {
+ case 2:
+ /* Enable software operation */
+ it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_MODE,
+ IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
+ /* Disable Smoothing */
+ it8772f_envc_write(res, IT8772F_FAN_CTL2_AUTO_MODE,
+ IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
+ /* Set a default medium fan speed */
+ it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START, 0x80);
+ break;
+ case 3:
+ /* Enable software operation */
+ it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_MODE,
+ IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
+ /* Disable Smoothing */
+ it8772f_envc_write(res, IT8772F_FAN_CTL3_AUTO_MODE,
+ IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
+ /* Set a default medium fan speed */
+ it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START, 0x80);
+ break;
+ }
+}
+
+static void it8772f_init(device_t dev)
+{
+ struct superio_ite_it8772f_config *conf = dev->chip_info;
+ struct resource *res;
+
+ if (!dev->enabled)
+ return;
+
+ switch (dev->path.pnp.device) {
+ case IT8772F_EC:
+ res = find_resource(dev, PNP_IDX_IO0);
+ if (!res)
+ break;
+
+ /* Enable PECI if configured */
+ it8772f_enable_peci(res, conf->peci_tmpin);
+
+ /* Enable FANx if configured */
+ if (conf->fan1_enable)
+ it8772f_enable_fan(res, 1);
+ if (conf->fan2_enable)
+ it8772f_enable_fan(res, 2);
+ if (conf->fan3_enable)
+ it8772f_enable_fan(res, 3);
+ break;
+ case IT8772F_GPIO:
+ /* Set GPIO output levels */
+ res = find_resource(dev, PNP_IDX_IO1);
+ if (res) {
+ if (conf->gpio_set1)
+ outb(conf->gpio_set1, res->base + 0);
+ if (conf->gpio_set2)
+ outb(conf->gpio_set2, res->base + 1);
+ if (conf->gpio_set3)
+ outb(conf->gpio_set3, res->base + 2);
+ if (conf->gpio_set4)
+ outb(conf->gpio_set4, res->base + 3);
+ if (conf->gpio_set5)
+ outb(conf->gpio_set5, res->base + 4);
+ if (conf->gpio_set6)
+ outb(conf->gpio_set6, res->base + 5);
+ }
+ break;
+ case IT8772F_KBCK:
+ if (!conf->skip_keyboard) {
+ set_kbc_ps2_mode();
+ pc_keyboard_init(&conf->keyboard);
+ }
+ break;
+ case IT8772F_KBCM:
+ break;
+ case IT8772F_IR:
+ break;
+ }
+}
+
+static void it8772f_pnp_set_resources(device_t dev)
+{
+ pnp_enter_ext_func_mode(dev);
+ pnp_set_resources(dev);
+ pnp_exit_ext_func_mode(dev);
+}
+
+static void it8772f_pnp_enable_resources(device_t dev)
+{
+ pnp_enter_ext_func_mode(dev);
+ pnp_enable_resources(dev);
+ pnp_exit_ext_func_mode(dev);
+}
+
+static void it8772f_pnp_enable(device_t dev)
+{
+ pnp_enter_ext_func_mode(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, !!dev->enabled);
+ pnp_exit_ext_func_mode(dev);
+}
+
+static struct device_operations ops = {
+ .read_resources = pnp_read_resources,
+ .set_resources = it8772f_pnp_set_resources,
+ .enable_resources = it8772f_pnp_enable_resources,
+ .enable = it8772f_pnp_enable,
+ .init = it8772f_init,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ /* Floppy Disk Controller */
+ { &ops, IT8772F_FDC, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, },
+ /* Serial Port 1 */
+ { &ops, IT8772F_SP1, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, },
+ /* Environmental Controller */
+ { &ops, IT8772F_EC, PNP_IO0 | PNP_IO1 | PNP_IRQ0,
+ {0x0ff8, 0}, {0x0ffc, 4}, },
+ /* KBC Keyboard */
+ { &ops, IT8772F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0,
+ {0x0fff, 0}, {0x0fff, 4}, },
+ /* KBC Mouse */
+ { &ops, IT8772F_KBCM, PNP_IRQ0, },
+ /* 27 GPIOs */
+ { &ops, IT8772F_GPIO, PNP_IO0 | PNP_IO1,
+ {0x0fff, 0}, {0x0ff8, 0}, },
+ /* Infrared */
+ { &ops, IT8772F_IR, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, },
+};
+
+static void enable_dev(struct device *dev)
+{
+ pnp_enable_devices(dev, &pnp_ops,
+ ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
+}
+
+struct chip_operations superio_ite_it8772f_ops = {
+ CHIP_NAME("ITE IT8772F Super I/O")
+ .enable_dev = enable_dev,
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 04:42:02 +0000