diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/Proc/Mem/Feat')
26 files changed, 5548 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.c new file mode 100644 index 0000000000..1e74421351 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.c @@ -0,0 +1,213 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfchi.c + * + * Feature Channel interleaving support + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Chintlv) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "mfchi.h" +#include "Ids.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define _4GB_ (0x10000 >> 10) + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * MemFInterleaveChannels: + * + * Applies DIMM channel interleaving if enabled, if not ganged mode, and + * there are valid dimms in both channels. Called once per Node. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInterleaveChannels ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT32 DramBase; + UINT32 DctSelBase; + UINT32 HoleSize; + UINT32 HoleBase; + UINT32 HoleOffset; + UINT32 Dct0Size; + UINT32 Dct1Size; + UINT32 SmallerDct; + UINT8 DctSelIntLvAddr; + UINT8 DctSelHi; + UINT8 DctSelHiRngEn; + UINT32 HoleValid; + + MEM_PARAMETER_STRUCT *RefPtr; + DIE_STRUCT *MCTPtr; + + ASSERT (NBPtr != NULL); + + RefPtr = NBPtr->RefPtr; + + DctSelIntLvAddr = NBPtr->DefDctSelIntLvAddr; + if (RefPtr->EnableChannelIntlv) { + HoleSize = 0; + HoleBase = 0; + if (RefPtr->GStatus[GsbSoftHole] || RefPtr->GStatus[GsbHWHole]) { + // HoleBase scaled from [47:16] to [47:26] + HoleBase = RefPtr->HoleBase >> 10; + HoleSize = _4GB_ - HoleBase; + } + + MCTPtr = NBPtr->MCTPtr; + + HoleValid = NBPtr->GetBitField (NBPtr, BFDramHoleValid); + if ((!MCTPtr->GangedMode) && + (MCTPtr->DctData[0].Timings.DctMemSize != 0) && + (MCTPtr->DctData[1].Timings.DctMemSize != 0)) { + // DramBase scaled [47:16] to [47:26] + DramBase = MCTPtr->NodeSysBase >> 10; + // Scale NodeSysLimit [47:16] to [47:26] + Dct1Size = (MCTPtr->NodeSysLimit + 1) >> 10; + Dct0Size = NBPtr->GetBitField (NBPtr, BFDctSelBaseOffset); + if ((Dct0Size >= _4GB_) && (DramBase < HoleBase)) { + Dct0Size -= HoleSize; + } + if ((Dct1Size >= _4GB_) && (DramBase < HoleBase)) { + Dct1Size -= HoleSize; + } + Dct1Size -= Dct0Size; + Dct0Size -= DramBase; + + // Select the bigger size DCT to put in DctSelHi + DctSelHiRngEn = 1; + DctSelHi = 0; + SmallerDct = Dct1Size; + if (Dct1Size == Dct0Size) { + SmallerDct = 0; + DctSelHiRngEn = 0; + } else if (Dct1Size > Dct0Size) { + SmallerDct = Dct0Size; + DctSelHi = 1; + } + + if (SmallerDct != 0) { + DctSelBase = (SmallerDct * 2) + DramBase; + } else { + DctSelBase = 0; + } + if ((DctSelBase >= HoleBase) && (DramBase < HoleBase)) { + DctSelBase += HoleSize; + } + IDS_OPTION_HOOK (IDS_CHANNEL_INTERLEAVE, &DctSelIntLvAddr, &(NBPtr->MemPtr->StdHeader)); + NBPtr->SetBitField (NBPtr, BFDctSelBaseAddr, DctSelBase >> 1); + NBPtr->SetBitField (NBPtr, BFDctSelHiRngEn, DctSelHiRngEn); + NBPtr->SetBitField (NBPtr, BFDctSelHi, DctSelHi); + NBPtr->SetBitField (NBPtr, BFDctSelIntLvAddr, DctSelIntLvAddr); + NBPtr->SetBitField (NBPtr, BFDctSelIntLvEn, 1); + + // DctSelBaseOffset = DctSelBaseAddr - Interleaved region + NBPtr->SetBitField (NBPtr, BFDctSelBaseOffset, DctSelBase - SmallerDct); + + // Adjust DramHoleOffset + if (HoleValid != 0) { + HoleOffset = DramBase; + if ((DctSelBase < HoleBase) && (DctSelBase != 0)) { + HoleOffset += (DctSelBase - DramBase) >> 1; + } + HoleOffset += HoleSize; + NBPtr->SetBitField (NBPtr, BFDramHoleOffset, HoleOffset << 3); + } + } else { + // + // Channel Interleaving is requested but cannot be enabled + // + PutEventLog (AGESA_WARNING, MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED, NBPtr->Node, 0, 0, 0, &NBPtr->MemPtr->StdHeader); + SetMemError (AGESA_WARNING, MCTPtr); + } + + return TRUE; + } else { + return FALSE; + } +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.h new file mode 100644 index 0000000000..6006c2b56b --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CHINTLV/mfchi.h @@ -0,0 +1,82 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfchi.h + * + * Feature channel interleaving + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#ifndef _MFCHI_H_ +#define _MFCHI_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFInterleaveChannels ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFCHI_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.c new file mode 100644 index 0000000000..812aa963e4 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.c @@ -0,0 +1,341 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfcsi.c + * + * Feature bank interleaving support (AKA Chip Select Interleaving ) + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Csintlv) + * @e \$Revision: 35912 $ @e \$Date: 2010-08-04 15:32:18 +0800 (Wed, 04 Aug 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* This file contains functions for Chip Select interleaving */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mfcsi.h" +#include "Ids.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +STATIC +MemFDctInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +STATIC +CsIntSwap ( + IN OUT UINT32 *BaseMaskRegPtr, + IN UINT8 EnChipSels, + IN UINT8 LoBit, + IN UINT8 HiBit + ); + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function Applies DIMM bank (chip-select) interleaving if enabled + * and if all criteria are met. Interleaves chip-selects on page boundaries. + * This function calls subfunctions that sets up CS interleaving on multiple Sockets + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + BOOLEAN RetFlag; + + ASSERT (NBPtr != NULL); + + RetFlag = FALSE; + if (NBPtr->RefPtr->EnableBankIntlv) { + if (NBPtr->MCTPtr->NodeMemSize) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + RetFlag |= MemFDctInterleaveBanks (NBPtr); + } + } + } + return RetFlag; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function checks if bank interleaving has been enabled or not. If yes, it will + * undo bank interleaving. Otherwise, it does nothing. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Bank interleaving has been enabled. + * @return FALSE - Bank interleaving has not been enabled. + */ + +BOOLEAN +MemFUndoInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Cs; + UINT8 Dct; + UINT32 CSMask; + BOOLEAN CSIntlvEnabled; + BOOLEAN RetFlag; + + ASSERT (NBPtr != NULL); + + RetFlag = FALSE; + + if (NBPtr->RefPtr->EnableBankIntlv) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.DctMemSize) { + CSIntlvEnabled = FALSE; + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { + if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { + CSMask = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); + if (((CSMask >> 5) & 0x1FF) != 0x1FF) { + CSIntlvEnabled = TRUE; + break; + } + } + } + if (CSIntlvEnabled) { + MemFDctInterleaveBanks (NBPtr); + RetFlag = TRUE; + } + } + } + } + return RetFlag; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function Applies DIMM bank (chip-select) interleaving if enabled + * and if all criteria are met. Interleaves chip-selects on page boundaries. + * This function is run once per Socket + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Register bits have been swapped. + * @return FALSE - Register bits have not been swapped. + * + */ + +BOOLEAN +STATIC +MemFDctInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Cs; + UINT8 EnChipSels; + UINT8 BankEncd; + UINT8 BankEncd0; + UINT8 i; + UINT8 j; + UINT32 BankAddrReg; + UINT32 BaseRegS0; + UINT32 BaseRegS1; + UINT32 MaskReg; + UINT8 Offset; + + ASSERT (NBPtr != NULL); + + // Check if CS interleaving can be enabled + EnChipSels = 0; + BankEncd0 = 0xFF; + Offset = 0; + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { + if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { + BankAddrReg = NBPtr->GetBitField (NBPtr, BFDramBankAddrReg); + BankEncd = (UINT8) ((BankAddrReg >> ((Cs / 2) * 4)) & 0xF); + if (BankEncd0 == 0xFF) { + BankEncd0 = BankEncd; + } else if (BankEncd0 != BankEncd) { + break; + } + EnChipSels++; + } + } + + // Swap Dram Base/Mask Addr to enable CS interleaving + if ((Cs == MAX_CS_PER_CHANNEL) && ((EnChipSels == 2) || (EnChipSels == 4) || (EnChipSels == 8))) { + NBPtr->TechPtr->GetCSIntLvAddr (BankEncd0, &i, &j); + + if (NBPtr->MCTPtr->Status[Sb128bitmode]) { + i++; + j++; + } + + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs += 2) { + // + // LRDIMMS - Add an offset to the bit positions specified based on D18F2x[6C:60]_dct[1:0][RankDef] as follows: + // RankDef=0xb: 0 RankDef=10b: 1 RankDef=11b: 2 + // Using RankMult information: Lo/HiBit <<= (Mult >> 1) + // + if (NBPtr->MCTPtr->Status[SbLrdimms]) { + Offset = ((NBPtr->ChannelPtr->LrDimmRankMult[Cs >> 1]) >> 1); + } + BaseRegS0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs); + BaseRegS1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1); + if (((BaseRegS0 | BaseRegS1) & 1) != 0) { + // Swap Mask register bits + MaskReg = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); + CsIntSwap (&MaskReg, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (Cs / 2), MaskReg); + + // Swap Base register bits + CsIntSwap (&BaseRegS0, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs, BaseRegS0); + CsIntSwap (&BaseRegS1, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1, BaseRegS1); + } + } + return TRUE; + } else { + // + // Bank Interleaving is requested but cannot be enabled + // + PutEventLog (AGESA_WARNING, MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); + SetMemError (AGESA_WARNING, NBPtr->MCTPtr); + NBPtr->MCTPtr->ErrStatus[EsbBkIntDis] = TRUE; + } + return FALSE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This supporting function swaps Chip selects + * + * @param[in,out] *BaseMaskRegPtr - Pointer to the Mask Register + * @param[in] *EnChipSels - Chip Selects to Enable + * @param[in] *LoBit - Lowest Bit + * @param[in] *HiBit - Highest Bit + * + * + */ + +VOID +STATIC +CsIntSwap ( + IN OUT UINT32 *BaseMaskRegPtr, + IN UINT8 EnChipSels, + IN UINT8 LoBit, + IN UINT8 HiBit + ) +{ + UINT8 BitDelta; + UINT32 TempHi; + UINT32 TempLo; + UINT32 AddrLoMask; + UINT32 AddrHiMask; + + ASSERT (BaseMaskRegPtr != NULL); + ASSERT (HiBit > LoBit); + + BitDelta = HiBit - LoBit; + AddrLoMask = (((UINT32)EnChipSels) - 1) << LoBit; + AddrHiMask = AddrLoMask << BitDelta; + + TempHi = TempLo = *BaseMaskRegPtr; + TempLo &= AddrLoMask; + TempLo <<= BitDelta; // move lower bits to upper bit position + TempHi &= AddrHiMask; + TempHi >>= BitDelta; // move upper bits to lower bit position + + *BaseMaskRegPtr &= ~AddrLoMask; + *BaseMaskRegPtr &= ~AddrHiMask; + *BaseMaskRegPtr |= TempLo | TempHi; +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.h new file mode 100644 index 0000000000..1e11f940bf --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/CSINTLV/mfcsi.h @@ -0,0 +1,82 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfcsi.h + * + * Memory Controller + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#ifndef _MFCSI_H_ +#define _MFCSI_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFCSI_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/DMI/mfDMI.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/DMI/mfDMI.c new file mode 100644 index 0000000000..b4d17194ea --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/DMI/mfDMI.c @@ -0,0 +1,573 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfDMI.c + * + * Memory DMI table support. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Main) + * @e \$Revision: 39742 $ @e \$Date: 2010-10-15 02:11:58 +0800 (Fri, 15 Oct 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + +#include "AGESA.h" +#include "Ids.h" +#include "heapManager.h" +#include "cpuServices.h" +#include "mm.h" +#include "mn.h" +#include "mu.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_DMI_MFDMI_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +#define MAX_DCTS_PER_DIE 2 + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets DDR3 DMI information from SPD buffer and stores the info into heap + * + * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK + * + */ +BOOLEAN +MemFDMISupport3 ( + IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr + ) +{ + UINT8 i; + UINT8 Dimm; + UINT8 Socket; + UINT8 NodeId; + UINT8 Dct; + UINT8 Channel; + UINT8 temp; + UINT8 MaxDimms; + UINT8 DimmIndex; + UINT8 MaxChannelsPerSocket; + UINT8 MaxDimmsPerChannel; + UINT8 FormFactor; + UINT16 TotalWidth; + UINT16 Speed; + UINT16 Capacity; + UINT16 Width; + UINT16 Rank; + UINT16 BusWidth; + UINT64 ManufacturerIdCode; + UINT32 MaxSockets; + UINT32 Address; + + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT *MemPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + MEM_DMI_INFO *DmiTable; + MEM_PARAMETER_STRUCT *RefPtr; + + DIE_STRUCT *MCTPtr; + CH_DEF_STRUCT *ChannelPtr; + SPD_DEF_STRUCT *SpdDataStructure; + + NBPtr = MemMainPtr->NBPtr; + MemPtr = MemMainPtr->MemPtr; + SpdDataStructure = MemPtr->SpdDataStructure; + MCTPtr = NBPtr->MCTPtr; + RefPtr = MemPtr->ParameterListPtr; + + // Initialize local variables + MaxDimms = 0; + + AGESA_TESTPOINT (TpProcMemDmi, &MemPtr->StdHeader); + + ASSERT (NBPtr != NULL); + + MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ()); + for (Socket = 0; Socket < MaxSockets; Socket++) { + for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) { + temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); + MaxDimms = MaxDimms + temp; + } + } + + // Allocate heap for memory DMI table 16, 17, 19, 20 + AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 2 + sizeof (DMI_T17_MEMORY_TYPE); + + AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) { + PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader); + SetMemError (AGESA_CRITICAL, MCTPtr); + ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR3 + return FALSE; + } + + DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2 + sizeof (DMI_T17_MEMORY_TYPE)); + *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms; // Number of memory devices + *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = Ddr3MemType; // Memory type + + // + // DMI TYPE 17 + // + DimmIndex = 0; + for (Socket = 0; Socket < MaxSockets; Socket++) { + MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); + for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) { + // + // Get Node number and Dct number for this channel + // + ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel]; + NodeId = ChannelPtr->MCTPtr->NodeId; + Dct = ChannelPtr->Dct; + NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); + MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); + for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) { + DmiTable[DimmIndex].TotalWidth = 0xFFFF; + DmiTable[DimmIndex].DataWidth = 0xFFFF; + DmiTable[DimmIndex].MemorySize = 0xFFFF; + DmiTable[DimmIndex].Speed = 0; + DmiTable[DimmIndex].ManufacturerIdCode = 0; + DmiTable[DimmIndex].Attributes = 0; + DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF; + DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF; + DmiTable[DimmIndex].DimmPresent = 0; + DmiTable[DimmIndex].Socket = Socket; + DmiTable[DimmIndex].Channel = Channel; + DmiTable[DimmIndex].Dimm = Dimm; + DmiTable[DimmIndex].ConfigSpeed = 0; + + for (i = 0; i < 4; i++) { + DmiTable[DimmIndex].SerialNumber[i] = 0xFF; + } + + for (i = 0; i < 18; i++) { + DmiTable[DimmIndex].PartNumber[i] = 0xFF; + } + + if (SpdDataStructure[DimmIndex].DimmPresent) { + // Total Width (offset 08h) & Data Width (offset 0Ah) + TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[8]; + if ((TotalWidth & 0x18) == 0) { + // non ECC + if ((TotalWidth & 0x07) == 0) { + DmiTable[DimmIndex].TotalWidth = 8; // 8 bits + } else if ((TotalWidth & 0x07) == 1) { + DmiTable[DimmIndex].TotalWidth = 16; // 16 bits + } else if ((TotalWidth & 0x07) == 2) { + DmiTable[DimmIndex].TotalWidth = 32; // 32 bits + } else if ((TotalWidth & 0x07) == 3) { + DmiTable[DimmIndex].TotalWidth = 64; // 64 bits + } + DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth ; + } else { + // ECC + if ((TotalWidth & 0x07) == 0) { + DmiTable[DimmIndex].TotalWidth = 8 + 8; // 8 bits + } else if ((TotalWidth & 0x07) == 1) { + DmiTable[DimmIndex].TotalWidth = 16 + 8; // 16 bits + } else if ((TotalWidth & 0x07) == 2) { + DmiTable[DimmIndex].TotalWidth = 32 + 8; // 32 bits + } else if ((TotalWidth & 0x07) == 3) { + DmiTable[DimmIndex].TotalWidth = 64 + 8; // 64 bits + } + DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth - 8; + } + + // Memory Size (offset 0Ch) + Capacity = 0; + BusWidth = 0; + Width = 0; + Rank = 0; + temp = (UINT8) SpdDataStructure[DimmIndex].Data[4]; + if ((temp & 0x0F) == 0) { + Capacity = 0x0100; // 256M + } else if ((temp & 0x0F) == 1) { + Capacity = 0x0200; // 512M + } else if ((temp & 0x0F) == 2) { + Capacity = 0x0400; // 1G + } else if ((temp & 0x0F) == 3) { + Capacity = 0x0800; // 2G + } else if ((temp & 0x0F) == 4) { + Capacity = 0x1000; // 4G + } else if ((temp & 0x0F) == 5) { + Capacity = 0x2000; // 8G + } else if ((temp & 0x0F) == 6) { + Capacity = 0x4000; // 16G + } + + temp = (UINT8) SpdDataStructure[DimmIndex].Data[8]; + if ((temp & 0x07) == 0) { + BusWidth = 8; // 8 bits + } else if ((temp & 0x07) == 1) { + BusWidth = 16; // 16 bits + } else if ((temp & 0x07) == 2) { + BusWidth = 32; // 32 bits + } else if ((temp & 0x07) == 3) { + BusWidth = 64; // 64 bits + } + + temp = (UINT8) SpdDataStructure[DimmIndex].Data[7]; + if ((temp & 0x07) == 0) { + Width = 4; // 4 bits + } else if ((temp & 0x07) == 1) { + Width = 8; // 8 bits + } else if ((temp & 0x07) == 2) { + Width = 16; // 16 bits + } else if ((temp & 0x07) == 3) { + Width = 32; // 32 bits + } + + temp = (UINT8) SpdDataStructure[DimmIndex].Data[7]; + if (((temp >> 3) & 0x07) == 0) { + Rank = 1; // 4 bits + DmiTable[DimmIndex].Attributes = 1; // Single Rank Dimm + } else if (((temp >> 3) & 0x07) == 1) { + Rank = 2; // 8 bits + DmiTable[DimmIndex].Attributes = 2; // Dual Rank Dimm + } else if (((temp >> 3) & 0x07) == 2) { + Rank = 3; // 16 bits + } else if (((temp >> 3) & 0x07) == 3) { + Rank = 4; // 32 bits + DmiTable[DimmIndex].Attributes = 4; // Quad Rank Dimm + } + + DmiTable[DimmIndex].MemorySize = (UINT16) (Capacity / 8 * BusWidth / Width * Rank); + + // Form Factor (offset 0Eh) + FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[3]; + if ((FormFactor & 0x01) == 0 || (FormFactor & 0x02) == 0) { + DmiTable[DimmIndex].FormFactor = 0x09; // RDIMM or UDIMM + } else if ((FormFactor & 0x03) == 0) { + DmiTable[DimmIndex].FormFactor = 0x0D; // SO-DIMM + } + + // DIMM Present + DmiTable[DimmIndex].DimmPresent = 1; + + // Speed (offset 15h) + Speed = (UINT16) SpdDataStructure[DimmIndex].Data[12]; + if (Speed == 20) { + DmiTable[DimmIndex].Speed = 800; // DDR3-800 + } else if (Speed == 15) { + DmiTable[DimmIndex].Speed = 1066; // DDR3-1066 + } else if (Speed == 12) { + DmiTable[DimmIndex].Speed = 1333; // DDR3-1333 + } else if (Speed == 10) { + DmiTable[DimmIndex].Speed = 1600; // DDR3-1600 + } + + // Manufacturer (offset 17h) + ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[118]; + DmiTable[DimmIndex].ManufacturerIdCode = (ManufacturerIdCode << 8) | ((UINT64) SpdDataStructure[DimmIndex].Data[117]); + + // Serial Number (offset 18h) + for (i = 0; i < 4; i++) { + DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 122]; + } + // Part Number (offset 1Ah) + for (i = 0; i < 18; i++) { + DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 128]; + } + // Extended Size (offset 1Ch) - @todo: pending for SPD SPEC update + DmiTable[DimmIndex].ExtSize = 0; + + // Configured Memory Clock Speed (offset 20h) + DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed; + + // AGESA does NOT support this feature when bank interleaving is enabled. + if (!RefPtr->EnableBankIntlv) { + if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) { + Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & 0x1FF83FE0; + Address = Address >> 2; + DmiTable[DimmIndex].StartingAddr = Address; + DmiTable[DimmIndex].EndingAddr = Address + (UINT32) (DmiTable[DimmIndex].MemorySize * 0x0400); + } + } + } // Dimm present + } // Dimm loop + } // Channel loop + } // Socket loop + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets DDR2 DMI information from SPD buffer and stores the info into heap + * + * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK + * + */ +BOOLEAN +MemFDMISupport2 ( + IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr + ) +{ + UINT8 i; + UINT8 Dimm; + UINT8 Socket; + UINT8 NodeId; + UINT8 Dct; + UINT8 Channel; + UINT8 temp; + UINT8 MaxDimms; + UINT8 DimmIndex; + UINT8 MaxChannelsPerSocket; + UINT8 MaxDimmsPerChannel; + UINT8 FormFactor; + UINT8 Temp; + UINT8 Rank; + UINT16 TotalWidth; + UINT32 Speed; + UINT32 MaxSockets; + UINT32 Address; + + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT *MemPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + MEM_DMI_INFO *DmiTable; + DIE_STRUCT *MCTPtr; + CH_DEF_STRUCT *ChannelPtr; + SPD_DEF_STRUCT *SpdDataStructure; + MEM_PARAMETER_STRUCT *RefPtr; + + NBPtr = MemMainPtr->NBPtr; + MemPtr = MemMainPtr->MemPtr; + SpdDataStructure = MemPtr->SpdDataStructure; + MCTPtr = NBPtr->MCTPtr; + RefPtr = MemPtr->ParameterListPtr; + + // Initialize local variables + MaxDimms = 0; + + ASSERT (NBPtr != NULL); + + MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ()); + for (Socket = 0; Socket < MaxSockets; Socket++) { + for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) { + temp = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); + MaxDimms = MaxDimms + temp; + } + } + + // Allocate heap for memory DMI table 16, 17, 19, 20 + AllocHeapParams.RequestedBufferSize = MaxDimms * sizeof (MEM_DMI_INFO) + 3; + + AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) { + PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader); + SetMemError (AGESA_CRITICAL, MCTPtr); + ASSERT(FALSE); // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR2 + return FALSE; + } + + DmiTable = (MEM_DMI_INFO *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2 + sizeof (DMI_T17_MEMORY_TYPE)); + *((UINT16 *) (AllocHeapParams.BufferPtr)) = MaxDimms; // Number of memory devices + *((DMI_T17_MEMORY_TYPE *) ((UINT8 *) (AllocHeapParams.BufferPtr) + 2)) = Ddr2MemType; // Memory type + + // + // DMI TYPE 17 + // + DimmIndex = 0; + for (Socket = 0; Socket < MaxSockets; Socket++) { + MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); + for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) { + // + // Get Node number and Dct number for this channel + // + ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel]; + NodeId = ChannelPtr->MCTPtr->NodeId; + Dct = ChannelPtr->Dct; + NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); + NBPtr[NodeId].SwitchDCT (&NBPtr[NodeId], Dct); + MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel); + for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++, DimmIndex++) { + DmiTable[DimmIndex].TotalWidth = 0xFFFF; + DmiTable[DimmIndex].DataWidth = 0xFFFF; + DmiTable[DimmIndex].MemorySize = 0xFFFF; + DmiTable[DimmIndex].Speed = 0; + DmiTable[DimmIndex].ManufacturerIdCode = 0; + DmiTable[DimmIndex].Attributes = 0; + DmiTable[DimmIndex].StartingAddr = 0xFFFFFFFF; + DmiTable[DimmIndex].EndingAddr = 0xFFFFFFFF; + DmiTable[DimmIndex].DimmPresent = 0; + DmiTable[DimmIndex].ConfigSpeed = 0; + + for (i = 0; i < 4; i++) { + DmiTable[DimmIndex].SerialNumber[i] = 0xFF; + } + + for (i = 0; i < 18; i++) { + DmiTable[DimmIndex].PartNumber[i] = 0xFF; + } + + if (SpdDataStructure[DimmIndex].DimmPresent) { + // Total Width (offset 08h) & Data Width (offset 0Ah) + TotalWidth = (UINT16) SpdDataStructure[DimmIndex].Data[13]; + if ((TotalWidth & 0x04) != 0) { + DmiTable[DimmIndex].TotalWidth = 4; // 4 bits + } else if ((TotalWidth & 0x08) != 0) { + DmiTable[DimmIndex].TotalWidth = 8; // 8 bits + } else if ((TotalWidth & 0x10) != 0) { + DmiTable[DimmIndex].TotalWidth = 16; // 16 bits + } else if ((TotalWidth & 0x20) != 0) { + DmiTable[DimmIndex].TotalWidth = 32; // 32 bits + } + DmiTable[DimmIndex].DataWidth = DmiTable[DimmIndex].TotalWidth; + + // Memory Size (offset 0Ch), Attributes (offset 1Bh) + Rank = (UINT8) SpdDataStructure[DimmIndex].Data[5] & 0x07; + if (Rank == 0) { + DmiTable[DimmIndex].Attributes = 1; // Single Rank Dimm + } else if (Rank == 1) { + DmiTable[DimmIndex].Attributes = 2; // Dual Rank Dimm + } else if (Rank == 3) { + DmiTable[DimmIndex].Attributes = 4; // Quad Rank Dimm + } + + Temp = (UINT8) SpdDataStructure[DimmIndex].Data[31]; + for (i = 0; i < 8; i++) { + if ((Temp & 0x01) == 1) { + DmiTable[DimmIndex].MemorySize = 0x80 * (i + 1) * (Rank + 1); + } + Temp = Temp >> 1; + } + + // Form Factor (offset 0Eh) + FormFactor = (UINT8) SpdDataStructure[DimmIndex].Data[20]; + if ((FormFactor & 0x20) == 4) { + DmiTable[DimmIndex].FormFactor = 0x0D; // SO-DIMM + } else { + DmiTable[DimmIndex].FormFactor = 0x09; // RDIMM or UDIMM + } + + // DIMM Present + DmiTable[DimmIndex].DimmPresent = 1; + + // DIMM Index + DmiTable[DimmIndex].Socket = Socket; + DmiTable[DimmIndex].Channel = Channel; + DmiTable[DimmIndex].Dimm = Dimm; + + // Speed (offset 15h) + Speed = NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFDramConfigHiReg); + Speed = Speed & 0x00000007; + if (Speed == 0) { + DmiTable[DimmIndex].Speed = 400; // 400MHz + } else if (Speed == 1) { + DmiTable[DimmIndex].Speed = 533; // 533MHz + } else if (Speed == 2) { + DmiTable[DimmIndex].Speed = 667; // 667MHz + } else if (Speed == 3) { + DmiTable[DimmIndex].Speed = 800; // 800MHz + } + + // Manufacturer (offset 17h) + DmiTable[DimmIndex].ManufacturerIdCode = (UINT64) SpdDataStructure[DimmIndex].Data[64]; + + // Serial Number (offset 18h) + for (i = 0; i < 4; i++) { + DmiTable[DimmIndex].SerialNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 95]; + } + + // Part Number (offset 1Ah) + for (i = 0; i < 18; i++) { + DmiTable[DimmIndex].PartNumber[i] = (UINT8) SpdDataStructure[DimmIndex].Data[i + 73]; + } + + // Configured Memory Clock Speed (offset 20h) + DmiTable[DimmIndex].ConfigSpeed = NBPtr[NodeId].DCTPtr->Timings.Speed; + + // AGESA does NOT support this feature when bank interleaving is enabled. + if (!RefPtr->EnableBankIntlv) { + if ((NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm) & 1) != 0) { + Address = (NBPtr[NodeId].GetBitField (&NBPtr[NodeId], BFCSBaseAddr0Reg + 2 * Dimm)) & 0x1FF83FE0; + Address = Address >> 2; + DmiTable[DimmIndex].StartingAddr = Address; + DmiTable[DimmIndex].EndingAddr = Address + (UINT32) (DmiTable[DimmIndex].MemorySize * 0x0400); + } + } + + } // DIMM Present + } // DIMM loop + } + } + + return TRUE; +} + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.c new file mode 100644 index 0000000000..4ea95e98cd --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.c @@ -0,0 +1,321 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfecc.c + * + * Feature ECC initialization functions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/ECC) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mm.h" +#include "mn.h" +#include "mfecc.h" +#include "Filecode.h" +#include "mfmemclr.h" +#include "GeneralServices.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_ECC_MFECC_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +UINT32 +STATIC +MemFGetScrubAddr ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +STATIC +InitECCOverriedeStruct ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT ECC_OVERRIDE_STRUCT *pecc_override_struct + ); + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +extern BUILD_OPT_CFG UserOptions; + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function checks to see if ECC can be enabled on all nodes + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFCheckECC ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + DIE_STRUCT *MCTPtr; + MEM_SHARED_DATA *SharedPtr; + + ASSERT (NBPtr != NULL); + + MCTPtr = NBPtr->MCTPtr; + SharedPtr = NBPtr->SharedPtr; + + if (MCTPtr->NodeMemSize != 0) { + if (SharedPtr->AllECC && MCTPtr->Status[SbEccDimms] && (MCTPtr->ErrCode < AGESA_ERROR)) { + // Clear all MCA reports before using scrubber + // to initialize ECC check bits + // + NBPtr->McaNbCtlReg = NBPtr->GetBitField (NBPtr, BFMcaNbCtlReg); + NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, 0); + NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, 0); + // In unganged mode, set DctDctIntlv + if (!NBPtr->Ganged) { + NBPtr->SetBitField (NBPtr, BFDctDatIntLv, 1); + } + // + // Set Ecc Symbol Size + // + NBPtr->SetEccSymbolSize (NBPtr); + // If ECC can be enabled on this node, + // set the master ECCen bit (according to setup) + // + NBPtr->SetBitField (NBPtr, BFDramEccEn, 1); + // Do mem clear on current node + MemFMctMemClr_Init (NBPtr); + return TRUE; + } else { + if (SharedPtr->AllECC) { + SharedPtr->AllECC = FALSE; + } + // ECC requested but cannot be enabled + MCTPtr->Status[SbEccDimms] = FALSE; + MCTPtr->ErrStatus[EsbDramECCDis] = TRUE; + PutEventLog (AGESA_ERROR, MEM_ERROR_ECC_DIS, NBPtr->Node, 0, 0, 0, &NBPtr->MemPtr->StdHeader); + SetMemError (AGESA_ERROR, MCTPtr); + } + } + return FALSE; +} + + /* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes the ECC on all nodes + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInitECC ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Node; + UINT32 ScrubAddrRJ16; + DIE_STRUCT *MCTPtr; + MEM_SHARED_DATA *SharedPtr; + ECC_OVERRIDE_STRUCT ecc_override_struct; + BOOLEAN Flag; + + InitECCOverriedeStruct (NBPtr, &ecc_override_struct); + IDS_OPTION_HOOK (IDS_ECC, &ecc_override_struct, &(NBPtr->MemPtr->StdHeader)); + + ASSERT (NBPtr != NULL); + + MCTPtr = NBPtr->MCTPtr; + Node = MCTPtr->NodeId; + SharedPtr = NBPtr->SharedPtr; + Flag = TRUE; + + NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag); + + if ((MCTPtr->Status[SbEccDimms]) && (SharedPtr->AllECC)) { + // Check if the input dram scrub rate is supported or not + ASSERT (ecc_override_struct.CfgScrubDramRate <= 0x16); + if (ecc_override_struct.CfgScrubDramRate != 0) { + // Program scrub address, + // let the scrub Addr be the Base of this Node + // Only enable Dram scrubber when there is memory on current node + // + NBPtr->SetBitField (NBPtr, BFScrubReDirEn, 0); + ScrubAddrRJ16 = (NBPtr->GetBitField (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8; + ScrubAddrRJ16 |= NBPtr->GetBitField (NBPtr, BFDramBaseHiReg0 + Node) << 24; + NBPtr->SetBitField (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16); + NBPtr->SetBitField (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16); + NBPtr->SetBitField (NBPtr, BFDramScrub, ecc_override_struct.CfgScrubDramRate); + } + } + // Scrub CTL for Dcache, L2, L3 + // Check if the input L2 scrub rate is supported or not + ASSERT (ecc_override_struct.CfgScrubL2Rate <= 0x16); + NBPtr->SetBitField (NBPtr, BFL2Scrub, ecc_override_struct.CfgScrubL2Rate); + // Check if the input Dcache scrub rate is supported or not + ASSERT (ecc_override_struct.CfgScrubDcRate <= 0x16); + NBPtr->SetBitField (NBPtr, BFDcacheScrub, ecc_override_struct.CfgScrubDcRate); + // Do not enable L3 Scrub if F3xE8[L3Capable] is 0 or F3x188[DisableL3] is 1 + if ((NBPtr->GetBitField (NBPtr, BFL3Capable) == 1) && (NBPtr->GetBitField (NBPtr, BFDisableL3) == 0)) { + // Check if input L3 scrub rate is supported or not + ASSERT (ecc_override_struct.CfgScrubL3Rate <= 0x16); + NBPtr->SetBitField (NBPtr, BFL3Scrub, ecc_override_struct.CfgScrubL3Rate); + } + + // Check if Dcache scrubber or L2 scrubber is enabled + if ((ecc_override_struct.CfgScrubL2Rate != 0) || (ecc_override_struct.CfgScrubDcRate!= 0)) { + // If ClkDivisor is deeper than divide-by-16 + if (NBPtr->GetBitField (NBPtr, BFC1ClkDivisor) > 4) { + // Set it to divide-by-16 + NBPtr->SetBitField (NBPtr, BFC1ClkDivisor, 4); + } + } + + NBPtr->SetBitField (NBPtr, BFScrubReDirEn, ecc_override_struct.CfgEccRedirection); + NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, ecc_override_struct.CfgEccSyncFlood); + // Restore MCA reports after scrubber is done + // with initializing ECC check bits + NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, NBPtr->McaNbCtlReg); + + Flag = FALSE; + NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag); + + return TRUE; +} + +VOID +STATIC +InitECCOverriedeStruct ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT ECC_OVERRIDE_STRUCT *pecc_override_struct + ) +{ + pecc_override_struct->CfgEccRedirection = UserOptions.CfgEccRedirection; + pecc_override_struct->CfgEccSyncFlood = UserOptions.CfgEccSyncFlood; + pecc_override_struct->CfgScrubDcRate = UserOptions.CfgScrubDcRate; + + if (UserOptions.CfgScrubDramRate != 0xFF) { + pecc_override_struct->CfgScrubDramRate = UserOptions.CfgScrubDramRate; + } else { + if (NBPtr->MCTPtr->NodeMemSize <= 0x4000) { + pecc_override_struct->CfgScrubDramRate = 0x12; // 1 ~ 1 GB + } else if (NBPtr->MCTPtr->NodeMemSize <= 0x8000) { + pecc_override_struct->CfgScrubDramRate = 0x11; // 1 GB + 1 ~ 2 GB + } else if (NBPtr->MCTPtr->NodeMemSize <= 0x10000) { + pecc_override_struct->CfgScrubDramRate = 0x10; // 2 GB + 1 ~ 4 GB + } else if (NBPtr->MCTPtr->NodeMemSize <= 0x20000) { + pecc_override_struct->CfgScrubDramRate = 0x0F; // 4 GB + 1 ~ 8 GB + } else if (NBPtr->MCTPtr->NodeMemSize <= 0x40000) { + pecc_override_struct->CfgScrubDramRate = 0x0E; // 8 GB + 1 ~ 16 GB + } else { + pecc_override_struct->CfgScrubDramRate = 0x0D; //16 GB + 1 above + } + } + + pecc_override_struct->CfgScrubL2Rate = UserOptions.CfgScrubL2Rate; + pecc_override_struct->CfgScrubL3Rate = UserOptions.CfgScrubL3Rate; +} +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets the current 40-bit Scrub ADDR address, scaled to 32-bits, + * of the specified Node. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return Scrubber Address + */ + +UINT32 +STATIC +MemFGetScrubAddr ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT32 ScrubAddrHi; + UINT32 ScrubAddrLo; + UINT32 ScrubAddrRJ16; + + ASSERT (NBPtr != NULL); + + ScrubAddrHi = NBPtr->GetBitField (NBPtr, BFScrubAddrHiReg); + ScrubAddrLo = NBPtr->GetBitField (NBPtr, BFScrubAddrLoReg); + // Scrub Addr High again, detect 32-bit wrap + ScrubAddrRJ16 = NBPtr->GetBitField (NBPtr, BFScrubAddrHiReg); + if (ScrubAddrRJ16 != ScrubAddrHi) { + ScrubAddrHi = ScrubAddrRJ16; + ScrubAddrLo = NBPtr->GetBitField (NBPtr, BFScrubAddrLoReg); + } + return ((ScrubAddrHi << 16) | (ScrubAddrLo >> 16)); +} + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.h new file mode 100644 index 0000000000..16e5f7d03c --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfecc.h @@ -0,0 +1,82 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfecc.h + * + * Feature ECC initialization functions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#ifndef _MFECC_H_ +#define _MFECC_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFInitECC ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFECC_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfemp.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfemp.c new file mode 100644 index 0000000000..cdf3568259 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ECC/mfemp.c @@ -0,0 +1,174 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfemp.c + * + * Feature EMP initialization functions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/ECC) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "Ids.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_ECC_MFEMP_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +BOOLEAN +STATIC +IsPowerOfTwo ( + IN UINT32 TestNumber + ); + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +extern BUILD_OPT_CFG UserOptions; + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes EMP (Enhanced Memory Protection) + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInitEMP ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_PARAMETER_STRUCT *RefPtr; + DIE_STRUCT *MCTPtr; + + ASSERT (NBPtr != NULL); + + RefPtr = NBPtr->RefPtr; + MCTPtr = NBPtr->MCTPtr; + if (RefPtr->EnableEccFeature) { + if (NBPtr->GetBitField (NBPtr, BFEnhMemProtCap) == 0) { + PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_SUPPORTED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader); + MCTPtr->ErrStatus[EsbEMPNotSupported] = TRUE; + } else if (RefPtr->EnableChannelIntlv || RefPtr->EnableBankIntlv || RefPtr->EnableBankSwizzle) { + PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_CONFLICT, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader); + MCTPtr->ErrStatus[EsbEMPConflict] = TRUE; + } else if ((!MCTPtr->GangedMode) && + (!IsPowerOfTwo (MCTPtr->DctData[0].Timings.DctMemSize) && + !IsPowerOfTwo (MCTPtr->DctData[1].Timings.DctMemSize))) { + PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader); + MCTPtr->ErrStatus[EsbEMPDis] = TRUE; + } else { + // Reduce memory size to 7/8 of the original memory size + ASSERT ((MCTPtr->NodeMemSize % 8) == 0); + NBPtr->SetBitField (NBPtr, BFDramHoleValid, 0); + MCTPtr->NodeMemSize = (MCTPtr->NodeMemSize / 8) * 7; + NBPtr->HtMemMapInit (NBPtr); + NBPtr->CpuMemTyping (NBPtr); + + // Enable EMP + NBPtr->SetBitField (NBPtr, BFDramEccEn, 1); + + // Scrub CTL settings for Dcache, L2 + NBPtr->SetBitField (NBPtr, BFL2Scrub, UserOptions.CfgScrubL2Rate); + NBPtr->SetBitField (NBPtr, BFDcacheScrub, UserOptions.CfgScrubDcRate); + + NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, UserOptions.CfgEccSyncFlood); + return TRUE; + } + } + return FALSE; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function checks to see if the input is power of two. + * + * @param[in] TestNumber - Value to check for power of two + * + * @return TRUE - is power of two + * FALSE - is not power of two + */ +BOOLEAN +STATIC +IsPowerOfTwo ( + IN UINT32 TestNumber + ) +{ + return (BOOLEAN) ((TestNumber & (TestNumber - 1)) == 0); +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c new file mode 100644 index 0000000000..c6e85ec3f0 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c @@ -0,0 +1,195 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfdimmexclud.c + * + * Feature DIMM exclude. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/EXCLUDIMM) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + +#include "AGESA.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "Ids.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * Check and disable Chip selects that fail training for each node. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ +BOOLEAN +MemFRASExcludeDIMM ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + UINT8 ReserveDCT; + UINT8 q; + BOOLEAN Flag; + BOOLEAN IsCSIntlvEnabled; + UINT16 CsTestFail; + DIE_STRUCT *MCTPtr; + BOOLEAN RetVal; + + ASSERT (NBPtr != NULL); + ReserveDCT = NBPtr->Dct; + CsTestFail = 0; + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.CsTestFail != 0) { + // When there is no new failed dimm that needs to be excluded, then no need to go through the process. + switch (NBPtr->SharedPtr->DimmExcludeFlag) { + case NORMAL: + // See there is new dimm that needs to be excluded + if ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0) { + CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail; + } + break; + case TRAINING: + // Do not do any dimm excluding during training + // Dimm exclude will be done at the end of training + break; + case END_TRAINING: + // Exclude all dimms that have failures during training + if ((NBPtr->DCTPtr->Timings.CsTrainFail != 0) || + ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0)) { + CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail; + } + break; + default: + IDS_ERROR_TRAP; + } + } + } + + if (CsTestFail != 0) { + IsCSIntlvEnabled = FALSE; + MCTPtr = NBPtr->MCTPtr; + MCTPtr->NodeMemSize = 0; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = FALSE; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = 0; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = 0; + NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0); + NBPtr->SetBitField (NBPtr, BFDramLimitAddr, 0); + + if (MCTPtr->GangedMode) { + // if ganged mode, disable all pairs of CS that fail. + NBPtr->DCTPtr->Timings.CsTestFail |= CsTestFail; + } + + // if chip select interleaving has been enabled, need to undo it before remapping memory + if (NBPtr->FeatPtr->UndoInterleaveBanks (NBPtr)) { + IsCSIntlvEnabled = TRUE; + } + + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + if (!MCTPtr->GangedMode || (MCTPtr->Dct == 0)) { + if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { + NBPtr->DCTPtr->Timings.DctMemSize = 0; + + NBPtr->DCTPtr->Timings.CsEnabled = 0; + for (q = 0; q < MAX_CS_PER_CHANNEL; q++) { + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + q, 0); + } + + Flag = NBPtr->StitchMemory (NBPtr); + ASSERT (Flag == TRUE); + } + } + } + + // Re-enable chip select interleaving when remapping is done. + if (IsCSIntlvEnabled) { + NBPtr->FeatPtr->InterleaveBanks (NBPtr); + } + + RetVal = TRUE; + } else { + RetVal = FALSE; + } + NBPtr->SwitchDCT (NBPtr, ReserveDCT); + return RetVal; +} + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.c new file mode 100644 index 0000000000..9576f8014b --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.c @@ -0,0 +1,528 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfidendimm.c + * + * Translate physical system address to dimm identification. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "heapManager.h" +#include "mfidendimm.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE +extern MEM_NB_SUPPORT memNBInstalled[]; + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define MAX_DCTS_PER_DIE 2 ///< Max DCTs per die +#define MAX_CHLS_PER_DCT 1 ///< Max Channels per DCT + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +AGESA_STATUS +STATIC +MemFTransSysAddrToCS ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify, + IN MEM_MAIN_DATA_BLOCK *mmPtr + ); + +UINT32 +STATIC +MemFGetPCI ( + IN MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID, + IN UINT8 DctNum, + IN BIT_FIELD_NAME BitFieldName + ); + +UINT8 +STATIC +MemFUnaryXOR ( + IN UINT32 address + ); + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/*-----------------------------------------------------------------------------*/ +/** +* +* This function identifies the dimm on which the given memory address locates. +* +* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM +* +* @retval AGESA_SUCCESS - Successfully translate physical system address +* to dimm identification. +* AGESA_BOUNDS_CHK - Targeted address is out of bound. +* +*/ + +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify + ) +{ + UINT8 i; + AGESA_STATUS RetVal; + MEM_MAIN_DATA_BLOCK mmData; // Main Data block + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT MemData; + LOCATE_HEAP_PTR LocHeap; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + UINT8 Node; + UINT8 Dct; + UINT8 Die; + UINT8 DieCount; + + LibAmdMemCopy (&(MemData.StdHeader), &(AmdDimmIdentify->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(AmdDimmIdentify->StdHeader)); + mmData.MemPtr = &MemData; + RetVal = MemSocketScan (&mmData); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + DieCount = mmData.DieCount; + + // Search for AMD_MEM_AUTO_HANDLE on the heap first. + // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap. + LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE; + if (HeapLocateBuffer (&LocHeap, &AmdDimmIdentify->StdHeader) == AGESA_SUCCESS) { + // NB block has already been constructed by main block. + // No need to construct it here. + NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK))); + AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, &AmdDimmIdentify->StdHeader) != AGESA_SUCCESS) { + PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK, 0, 0, 0, 0, &AmdDimmIdentify->StdHeader); + ASSERT(FALSE); // Could not allocate heap space for NB block for Identify DIMM + return AGESA_FATAL; + } + NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr; + mmData.NBPtr = NBPtr; + // Construct each die. + for (Die = 0; Die < DieCount; Die ++) { + i = 0; + while (memNBInstalled[i].MemIdentifyDimmConstruct != 0) { + if (memNBInstalled[i].MemIdentifyDimmConstruct (&NBPtr[Die], &MemData, Die)) { + break; + } + i++; + }; + if (memNBInstalled[i].MemIdentifyDimmConstruct == 0) { + PutEventLog (AGESA_FATAL, MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM, Die, 0, 0, 0, &AmdDimmIdentify->StdHeader); + ASSERT(FALSE); // No Identify DIMM constructor found + return AGESA_FATAL; + } + } + } + + if ((RetVal = MemFTransSysAddrToCS (AmdDimmIdentify, &mmData)) == AGESA_SUCCESS) { + // Translate Node, DCT and Chip select number to Socket, Channel and Dimm number. + Node = AmdDimmIdentify->SocketId; + Dct = AmdDimmIdentify->MemChannelId; + AmdDimmIdentify->SocketId = MemData.DiesPerSystem[Node].SocketId; + AmdDimmIdentify->MemChannelId = NBPtr[Node].GetSocketRelativeChannel (&NBPtr[Node], Dct, 0); + AmdDimmIdentify->DimmId /= 2; + } + + return RetVal; +} + + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function translates the given physical system address to +* a node, channel select, chip select, bank, row, and column address. +* +* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM +* @param[in, out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK +* +* @retval AGESA_SUCCESS - The chip select address is found +* @retval AGESA_BOUNDS_CHK - Targeted address is out of bound. +* +*/ +AGESA_STATUS +STATIC +MemFTransSysAddrToCS ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify, + IN MEM_MAIN_DATA_BLOCK *mmPtr + ) +{ + BOOLEAN CSFound; + BOOLEAN DctSelHiRngEn; + BOOLEAN DctSelIntLvEn; + BOOLEAN DctGangEn; + BOOLEAN HiRangeSelected; + BOOLEAN DramHoleValid; + BOOLEAN CSEn; + BOOLEAN SwapDone; + BOOLEAN IntLvRgnSwapEn; + UINT8 DctSelHi; + UINT8 DramEn; + UINT8 range; + UINT8 IntlvEn; + UINT8 IntlvSel; + UINT8 ILog; + UINT8 DctSelIntLvAddr; + UINT8 DctNum; + UINT8 cs; + UINT8 BadDramCs; + UINT8 spare; + UINT8 IntLvRgnBaseAddr; + UINT8 IntLvRgnLmtAddr; + UINT8 IntLvRgnSize; + UINT32 temp; + UINT32 DramHoleOffset; + UINT64 DramBase; + UINT64 DramLimit; + UINT64 DctSelBaseAddr; + UINT64 DctSelBaseOffset; + UINT64 ChannelAddr; + UINT64 CSBase; + UINT64 CSMask; + UINT64 InputAddr; + UINT64 ChannelOffset; + MEM_NB_BLOCK *NBPtr; + + UINT64 SysAddr; + UINT8 *NodeID; + UINT8 *ChannelSelect; + UINT8 *ChipSelect; + + SysAddr = AmdDimmIdentify->MemoryAddress; + NodeID = &(AmdDimmIdentify->SocketId); + ChannelSelect = &(AmdDimmIdentify->MemChannelId); + ChipSelect = &(AmdDimmIdentify->DimmId); + CSFound = FALSE; + ILog = 0; + NBPtr = mmPtr->NBPtr; + + // Loop to determine the dram range + for (range = 0; range < mmPtr->DieCount; range ++) { + // DRAM Base + temp = MemFGetPCI (NBPtr, 0, 0, BFDramBaseReg0 + range); + DramEn = (UINT8) (temp & 0x3); + IntlvEn = (UINT8) ((temp >> 8) & 0x7); + + DramBase = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramBaseHiReg0 + range) & 0xFF) << 40) | + (((UINT64) temp & 0xFFFF0000) << 8); + + // DRAM Limit + temp = MemFGetPCI (NBPtr, 0, 0, BFDramLimitReg0 + range); + *NodeID = (UINT8) (temp & 0x7); + IntlvSel = (UINT8) ((temp >> 8) & 0x7); + DramLimit = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramLimitHiReg0 + range) & 0xFF) << 40) | + (((UINT64) temp << 8) | 0xFFFFFF); + + + if ((DramEn != 0) && (DramBase <= SysAddr) && (SysAddr <= DramLimit) && + ((IntlvEn == 0) || (IntlvSel == ((SysAddr >> 12) & IntlvEn)))) { + // Determine the number of bit positions consumed by Node Interleaving + switch (IntlvEn) { + + case 0x0: + ILog = 0; + break; + + case 0x1: + ILog = 1; + break; + + case 0x3: + ILog = 2; + break; + + case 0x7: + ILog = 3; + break; + + default: + IDS_ERROR_TRAP; + } + + // F2x10C Swapped Interleaved Region + IntLvRgnSwapEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSwapEn); + if (IntLvRgnSwapEn) { + IntLvRgnBaseAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnBaseAddr); + IntLvRgnLmtAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnLmtAddr); + IntLvRgnSize = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSize); + ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1)); + if (((SysAddr >> 34) == 0) && + ((((SysAddr >> 27) >= IntLvRgnBaseAddr) && ((SysAddr >> 27) <= IntLvRgnLmtAddr)) + || ((SysAddr >> 27) < IntLvRgnSize))) { + SysAddr ^= (UINT64) IntLvRgnBaseAddr << 27; + } + } + + // Extract variables from F2x110 DRAM Controller Select Low Register + DctSelHiRngEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHiRngEn); + DctSelHi = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHi); + DctSelIntLvEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvEn); + DctGangEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctGangEn); + DctSelIntLvAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvAddr); + DctSelBaseAddr = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseAddr) << 27; + DctSelBaseOffset = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseOffset) << 26; + + + // Determine if high DCT address range is being selected + if (DctSelHiRngEn && !DctGangEn && (SysAddr >= DctSelBaseAddr)) { + HiRangeSelected = TRUE; + } else { + HiRangeSelected = FALSE; + } + + // Determine Channel + if (DctGangEn) { + *ChannelSelect = (UINT8) ((SysAddr >> 3) & 0x1); + } else if (HiRangeSelected) { + *ChannelSelect = DctSelHi; + } else if (DctSelIntLvEn && (DctSelIntLvAddr == 0)) { + *ChannelSelect = (UINT8) ((SysAddr >> 6) & 0x1); + } else if (DctSelIntLvEn && (((DctSelIntLvAddr >> 1) & 0x1) != 0)) { + temp = MemFUnaryXOR ((UINT32) ((SysAddr >> 16) & 0x1F)); + if ((DctSelIntLvAddr & 0x1) != 0) { + *ChannelSelect = (UINT8) (((SysAddr >> 9) & 0x1) ^ temp); + } else { + *ChannelSelect = (UINT8) (((SysAddr >> 6) & 0x1) ^ temp); + } + } else if (DctSelIntLvEn) { + *ChannelSelect = (UINT8) ((SysAddr >> (12 + ILog)) & 0x1); + } else if (DctSelHiRngEn) { + *ChannelSelect = ~DctSelHi & 0x1; + } else { + *ChannelSelect = 0; + } + ASSERT (*ChannelSelect < NBPtr[*NodeID].DctCount); + + DramHoleOffset = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleOffset) << 23; + DramHoleValid = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleValid); + + // Determine base address offset + if (HiRangeSelected) { + if (((DctSelBaseAddr >> 32) == 0) && DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) { + ChannelOffset = (UINT64) DramHoleOffset; + } else { + ChannelOffset = DctSelBaseOffset; + } + } else { + if (DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) { + ChannelOffset = (UINT64) DramHoleOffset; + } else { + ChannelOffset = DramBase; + } + } + + // Remove hoisting offset and normalize to DRAM bus addresses + ChannelAddr = SysAddr - ChannelOffset; + + // Remove node interleaving + if (IntlvEn != 0) { + ChannelAddr = ((ChannelAddr >> (12 + ILog)) << 12) | (ChannelAddr & 0xFFF); + } + + // Remove channel interleave + if (DctSelIntLvEn && !HiRangeSelected && !DctGangEn) { + if ((DctSelIntLvAddr & 1) != 1) { + // A[6] Select or Hash 6 + ChannelAddr = ((ChannelAddr >> 7) << 6) | (ChannelAddr & 0x3F); + } else if (DctSelIntLvAddr == 1) { + // A[12] + ChannelAddr = ((ChannelAddr >> 13) << 12) | (ChannelAddr & 0xFFF); + } else { + // Hash 9 + ChannelAddr = ((ChannelAddr >> 10) << 9) | (ChannelAddr & 0x1FF); + } + } + + // Determine the Chip Select + for (cs = 0; cs < MAX_CS_PER_CHANNEL; ++ cs) { + DctNum = DctGangEn ? 0 : *ChannelSelect; + + // Obtain the CS Base + temp = MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + cs); + CSEn = (BOOLEAN) (temp & 0x1); + CSBase = ((UINT64) temp & CS_REG_MASK) << 8; + + // Obtain the CS Mask + CSMask = ((UINT64) MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSMask0Reg + (cs >> 1)) & CS_REG_MASK) << 8; + + // Adjust the Channel Addr for easy comparison + InputAddr = ((ChannelAddr >> 8) & CS_REG_MASK) << 8; + + if (CSEn && ((InputAddr & ~CSMask) == (CSBase & ~CSMask))) { + CSFound = TRUE; + + *ChipSelect = cs; + + temp = MemFGetPCI (NBPtr, *NodeID, 0, BFOnLineSpareControl); + SwapDone = (BOOLEAN) ((temp >> (1 + 2 * (*ChannelSelect))) & 0x1); + BadDramCs = (UINT8) ((temp >> (4 + 4 * (*ChannelSelect))) & 0x7); + if (SwapDone && (cs == BadDramCs)) { + // Find the spare rank for the channel + for (spare = 0; spare < MAX_CS_PER_CHANNEL; ++spare) { + if ((MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + spare) & 0x2) != 0) { + *ChipSelect = spare; + break; + } + } + } + ASSERT (*ChipSelect < MAX_CS_PER_CHANNEL); + + break; + } + } + } + if (CSFound) { + break; + } + } + + // last ditch sanity check + ASSERT (!CSFound || ((*NodeID < mmPtr->DieCount) && (*ChannelSelect < NBPtr[*NodeID].DctCount) && (*ChipSelect < MAX_CS_PER_CHANNEL))); + if (CSFound) { + return AGESA_SUCCESS; + } else { + return AGESA_BOUNDS_CHK; + } + +} + + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function is the interface to call the PCI register access function +* defined in NB block. +* +* @param[in] *NBPtr - Pointer to the parameter structure MEM_NB_BLOCK +* @param[in] NodeID - Node ID number of the target Northbridge +* @param[in] DctNum - DCT number if applicable, otherwise, put 0 +* @param[in] BitFieldName - targeted bitfield +* +* @retval UINT32 - 32 bits PCI register value +* +*/ +UINT32 +STATIC +MemFGetPCI ( + IN MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID, + IN UINT8 DctNum, + IN BIT_FIELD_NAME BitFieldName + ) +{ + MEM_NB_BLOCK *LocalNBPtr; + // Get the northbridge pointer for the targeted node. + LocalNBPtr = &NBPtr[NodeID]; + LocalNBPtr->Dct = DctNum; + // The caller of this function will take care of the ganged/unganged situation. + // So Ganged is set to be false here, and do PCI read on the DCT specified by DctNum. + return LocalNBPtr->GetBitField (LocalNBPtr, BitFieldName); +} + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function returns an even parity bit (making the total # of 1's even) +* {0, 1} = number of set bits in argument is {even, odd}. +* +* @param[in] address - the address on which the parity bit will be calculated +* +* @retval UINT8 - parity bit +* +*/ + +UINT8 +STATIC +MemFUnaryXOR ( + IN UINT32 address + ) +{ + UINT8 parity; + UINT8 index; + parity = 0; + for (index = 0; index < 32; ++ index) { + parity = (UINT8) (parity ^ (address & 0x1)); + address = address >> 1; + } + return parity; +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.h new file mode 100644 index 0000000000..842233c533 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/IDENDIMM/mfidendimm.h @@ -0,0 +1,110 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfidendimm.h + * + * Header file for address to dimm identification translator. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _MFIDENDIMM_H_ +#define _MFIDENDIMM_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define CS_REG_MASK 0x1FF83FE0 + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemNIdentifyDimmConstructorDr ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +BOOLEAN +MemNIdentifyDimmConstructorDA ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +BOOLEAN +MemNIdentifyDimmConstructorHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +BOOLEAN +MemNIdentifyDimmConstructorC32 ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +BOOLEAN +MemNIdentifyDimmConstructorLN ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +#endif //_MFIDENDIMM_H_ diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.c new file mode 100644 index 0000000000..b14d0e8e00 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.c @@ -0,0 +1,152 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfrintlv.c + * + * Feature Region interleaving support + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Intlvrgn) + * @e \$Revision: 38442 $ @e \$Date: 2010-09-24 06:39:57 +0800 (Fri, 24 Sep 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mport.h" +#include "mm.h" +#include "mn.h" +#include "mfintlvrn.h" +#include "Ids.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_INTLVRN_MFINTLVRN_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define _4GB_RJ27 ((UINT32)4 << (30 - 27)) +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * MemFInterleaveRegion: + * + * Applies region interleaving if both DCTs have different size of memory, and + * the channel interleaving region doesn't have UMA covered. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemFInterleaveRegion ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT32 TOM; + UINT32 TOM2; + UINT32 TOMused; + UINT32 UmaBase; + UINT32 DctSelBase; + S_UINT64 SMsr; + + MEM_DATA_STRUCT *MemPtr; + MEM_PARAMETER_STRUCT *RefPtr; + DIE_STRUCT *MCTPtr; + + MemPtr = NBPtr->MemPtr; + RefPtr = NBPtr->RefPtr; + MCTPtr = NBPtr->MCTPtr; + + UmaBase = (UINT32) RefPtr->UmaBase >> (27 - 16); + + //TOM scaled from [47:0] to [47:27] + LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader); + TOM = (SMsr.lo >> 27) | (SMsr.hi << (32 - 27)); + + //TOM2 scaled from [47:0] to [47:27] + LibAmdMsrRead (TOP_MEM2, (UINT64 *)&SMsr, &MemPtr->StdHeader); + TOM2 = (SMsr.lo >> 27) | (SMsr.hi << (32 - 27)); + + TOMused = (UmaBase >= _4GB_RJ27) ? TOM2 : TOM; + + if (UmaBase != 0) { + //Check if channel interleaving is enabled ? if so, go to next step. + if (NBPtr->GetBitField (NBPtr, BFDctSelIntLvEn) == 1) { + DctSelBase = NBPtr->GetBitField (NBPtr, BFDctSelBaseAddr); + //Skip if DctSelBase is equal to 0, because DCT0 has as the same memory size as DCT1. + if (DctSelBase != 0) { + //We need not enable swapped interleaved region when channel interleaving region has covered all of the UMA. + if (DctSelBase < TOMused) { + NBPtr->EnableSwapIntlvRgn (NBPtr, UmaBase, TOMused); + } + } + } + } +} + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.h new file mode 100644 index 0000000000..b0c925a254 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/INTLVRN/mfintlvrn.h @@ -0,0 +1,82 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfintlvrn.h + * + * Feature region interleaving + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +#ifndef _MFINTLVRN_H_ +#define _MFINTLVRN_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +VOID +MemFInterleaveRegion ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFINTLVRN_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.c new file mode 100644 index 0000000000..bf503bff7d --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.c @@ -0,0 +1,172 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * lvddr3.c + * + * Voltage change for DDR3 DIMMs. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/LVDDR3) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE +/* features */ +#include "mflvddr3.h" + + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*-----------------------------------------------------------------------------*/ +/** + * + * This function calculate the common lowest voltage supported by all DDR3 + * DIMMs in the system. This function only needs to be called on BSP. + * + * @param[in, out] *NBPtr - Pointer to NB block + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFLvDdr3 ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + CH_DEF_STRUCT *ChannelPtr; + MEM_TECH_BLOCK *TechPtr; + MEM_SHARED_DATA *mmSharedPtr; + UINT8 Dct; + UINT8 Channel; + UINT8 Dimm; + UINT8 *SpdBufferPtr; + UINT8 VDDByte; + UINT8 VoltageMap; + + mmSharedPtr = NBPtr->SharedPtr; + TechPtr = NBPtr->TechPtr; + VoltageMap = 0xFF; + + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) { + NBPtr->SwitchChannel (NBPtr, Channel); + ChannelPtr = NBPtr->ChannelPtr; + for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) { + if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, Dimm)) { + // SPD byte 6: Module Nominal Voltage, VDD + // 1.5v - bit 0 + // 1.35v - bit 1 + // 1.2v - bit 2 + VDDByte = SpdBufferPtr[MNVVDD]; + // Reverse the 1.5V operable bit. So its encoding can be consistent + // with that of 1.35V and 1.25V operable bit. + VDDByte ^= 1; + ASSERT (VDDByte != 0); + + if (mmSharedPtr->VoltageMap != 0) { + // Get the common supported voltage map + VoltageMap &= VDDByte; + } else { + // This is the second execution of all the loop as no common voltage is found + if (VDDByte == (1 << VOLT1_5)) { + // Always exclude 1.5V dimm if no common voltage is found + ChannelPtr->DimmExclude |= (UINT16) 1 << Dimm; + } + } + } + } + if (mmSharedPtr->VoltageMap == 0) { + NBPtr->DCTPtr->Timings.DimmExclude |= ChannelPtr->DimmExclude; + } + } + } + + if (mmSharedPtr->VoltageMap != 0) { + mmSharedPtr->VoltageMap &= VoltageMap; + } + + return TRUE; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.h new file mode 100644 index 0000000000..85bb6f41fb --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/LVDDR3/mflvddr3.h @@ -0,0 +1,80 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mflvddr3.h + * + * Header file for DDR3 DIMMs voltage configuration. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _MFLVDDR3_H_ +#define _MFLVDDR3_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define MNVVDD 6 +#define LOWEST_VOLT_BIT 2 + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ +BOOLEAN +MemFLvDdr3 ( + IN OUT MEM_NB_BLOCK *NBPtr +); + +#endif //_MFLVDDR3_H_ diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/MEMCLR/mfmemclr.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/MEMCLR/mfmemclr.c new file mode 100644 index 0000000000..6cbe11bfba --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/MEMCLR/mfmemclr.c @@ -0,0 +1,144 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfmemclr.c + * + * Feature function for memory clear operation + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Memclr) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "mfmemclr.h" +#include "Ids.h" +#include "merrhdl.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * Initiates memory clear operation on one node with Dram on it. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +BOOLEAN +MemFMctMemClr_Init ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + AGESA_TESTPOINT (TpProcMemMemClr, &NBPtr->MemPtr->StdHeader); + if (NBPtr->RefPtr->EnableMemClr == TRUE) { + if (NBPtr->MCTPtr->NodeMemSize != 0) { + if (!NBPtr->MemCleared) { + NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, SPECIAL_PCI_ACCESS_TIMEOUT, FALSE); + if (NBPtr->GetBitField (NBPtr, BFDramEnabled) == 1) { + NBPtr->FamilySpecificHook[BeforeMemClr] (NBPtr, NBPtr); + NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0); + NBPtr->SetBitField (NBPtr, BFMemClrInit, 1); + } + } + } + } + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * Ensures memory clear operation has completed on one node with Dram on it. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +BOOLEAN +MemFMctMemClr_Sync ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + if (NBPtr->RefPtr->EnableMemClr == TRUE) { + if (NBPtr->MCTPtr->NodeMemSize != 0) { + if (!NBPtr->MemCleared) { + NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, SPECIAL_PCI_ACCESS_TIMEOUT, FALSE); + NBPtr->PollBitField (NBPtr, BFMemCleared, 1, SPECIAL_PCI_ACCESS_TIMEOUT, FALSE); + NBPtr->SetBitField (NBPtr, BFDramBaseAddr, NBPtr->MCTPtr->NodeSysBase >> (27 - 16)); + NBPtr->MemCleared = TRUE; + } + } + } + return TRUE; +} + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.c new file mode 100644 index 0000000000..3e7a20af81 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.c @@ -0,0 +1,218 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfndi.c + * + * Feature applies Node memory interleaving + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Ndintlv) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "mfndi.h" +#include "Ids.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_NDINTLV_MFNDI_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define _4GB_ (0x10000) + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * Perform a check to see if node interleaving can be enabled on each node. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Node interleaving can be enabled. + * @return FALSE - Node interleaving cannot be enabled. + */ + +BOOLEAN +MemFCheckInterleaveNodes ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + DIE_STRUCT *MCTPtr; + + ASSERT (NBPtr != NULL); + + MCTPtr = NBPtr->MCTPtr; + + if (MCTPtr->NodeMemSize != 0) { + if (!NBPtr->SharedPtr->NodeIntlv.IsValid) { + NBPtr->SharedPtr->NodeIntlv.NodeMemSize = MCTPtr->NodeMemSize; + NBPtr->SharedPtr->NodeIntlv.Dct0MemSize = MCTPtr->DctData[0].Timings.DctMemSize; + NBPtr->SharedPtr->NodeIntlv.IsValid = TRUE; + } else { + if ((NBPtr->SharedPtr->NodeIntlv.NodeMemSize != MCTPtr->NodeMemSize) || + (NBPtr->SharedPtr->NodeIntlv.Dct0MemSize != MCTPtr->DctData[0].Timings.DctMemSize)) { + return FALSE; + } + } + } + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * Applies Node memory interleaving for each node. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInterleaveNodes ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 NodeCnt; + UINT8 BitShift; + UINT32 MemSize; + UINT32 Dct0MemSize; + UINT32 NodeSysBase; + UINT32 NodeSysLimit; + UINT32 HoleBase; + UINT32 HoleSize; + UINT32 HoleOffset; + MEM_PARAMETER_STRUCT *RefPtr; + DIE_STRUCT *MCTPtr; + + ASSERT (NBPtr != NULL); + + RefPtr = NBPtr->RefPtr; + MCTPtr = NBPtr->MCTPtr; + if (RefPtr->GStatus[GsbSoftHole] || RefPtr->GStatus[GsbHWHole]) { + HoleBase = RefPtr->HoleBase; + HoleSize = _4GB_ - HoleBase; + } else { + HoleBase = 0; + HoleSize = 0; + } + + NodeCnt = NBPtr->SharedPtr->NodeIntlv.NodeCnt; + Dct0MemSize = NBPtr->SharedPtr->NodeIntlv.Dct0MemSize; + MemSize = NBPtr->SharedPtr->NodeIntlv.NodeMemSize; + + BitShift = LibAmdBitScanForward (NodeCnt); + Dct0MemSize <<= BitShift; + if (HoleSize != 0) { + RefPtr->GStatus[GsbHWHole] = TRUE; + HoleOffset = HoleSize; + if (Dct0MemSize >= HoleBase) { + Dct0MemSize += HoleSize; + } else { + HoleOffset += Dct0MemSize; + } + } else { + HoleOffset = 0; + } + + MemSize = (MemSize << BitShift) + HoleSize; + + MCTPtr->NodeSysBase = 0; + MCTPtr->NodeSysLimit = MemSize - 1; + + NBPtr->SetBitField (NBPtr, BFDramIntlvSel, NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel); + NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0); + NBPtr->SetBitField (NBPtr, BFDramIntlvEn, NodeCnt - 1); + NBPtr->SetBitField (NBPtr, BFDramLimitAddr, (MemSize - 1) >> (27 - 16)); + + if (HoleSize != 0) { + MCTPtr->Status[SbHWHole] = TRUE; + // DramHoleBase will be set when sync address map to other nodes. + NBPtr->SetBitField (NBPtr, BFDramHoleOffset, HoleOffset >> (23 - 16)); + NBPtr->SetBitField (NBPtr, BFDramHoleValid, 1); + } + + if ((MCTPtr->DctData[1].Timings.DctMemSize != 0) && (!NBPtr->Ganged)) { + NBPtr->SetBitField (NBPtr, BFDctSelBaseAddr, Dct0MemSize >> (27 - 16)); + NBPtr->SetBitField (NBPtr, BFDctSelBaseOffset, Dct0MemSize >> (26 - 16)); + } + + NodeSysBase = NodeCnt - 1; + NodeSysLimit = ((MemSize - 1)& 0xFFFFFF00) | NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = TRUE; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = NodeSysBase; + NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = NodeSysLimit; + + NBPtr->SharedPtr->NodeIntlv.NodeIntlvSel++; + return TRUE; +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.h new file mode 100644 index 0000000000..1877c3513a --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/NDINTLV/mfndi.h @@ -0,0 +1,80 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfndi.h + * + * Feature node interleaving + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ +#ifndef _MFNDI_H_ +#define _MFNDI_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFInterleaveNodes ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFNDI_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c new file mode 100644 index 0000000000..a3d95dfadb --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c @@ -0,0 +1,176 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfodthermal.c + * + * On Dimm thermal management. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "Ids.h" +#include "mfodthermal.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/*-----------------------------------------------------------------------------*/ +/** + * + * This function does On-Dimm thermal management. + * + * @param[in, out] *NBPtr - Pointer to the MEM_NB_BLOCK. + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFOnDimmThermal ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 i; + UINT8 Dct; + CH_DEF_STRUCT *ChannelPtr; + MEM_DATA_STRUCT *MemPtr; + UINT8 *SpdBufferPtr; + UINT8 ThermalOp; + BOOLEAN ODTSEn; + BOOLEAN ExtendTmp; + + ODTSEn = FALSE; + ExtendTmp = FALSE; + + ASSERT (NBPtr != NULL); + MemPtr = NBPtr->MemPtr; + AGESA_TESTPOINT (TpProcMemOnDimmThermal, &MemPtr->StdHeader); + if (NBPtr->MCTPtr->NodeMemSize != 0) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + // Only go through the DCT if it is not disabled. + if (NBPtr->GetBitField (NBPtr, BFDisDramInterface) == 0) { + ChannelPtr = NBPtr->ChannelPtr; + // If Ganged mode is enabled, need to go through all dram devices on both DCTs. + if (!NBPtr->Ganged || (NBPtr->Dct != 1)) { + if (!(NBPtr->IsSupported[CheckSetSameDctODTsEn]) || (NBPtr->IsSupported[CheckSetSameDctODTsEn] && (NBPtr->Dct != 1))) { + ODTSEn = TRUE; + ExtendTmp = TRUE; + } + } + for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) { + if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, i)) { + // Check byte 31: thermal and refresh option. + ThermalOp = SpdBufferPtr[THERMAL_OPT]; + // Bit 3: ODTS readout + if (!((ThermalOp >> 3) & 1)) { + ODTSEn = FALSE; + } + // Bit 0: Extended Temperature Range. + if (!(ThermalOp & 1)) { + ExtendTmp = FALSE; + } + } + } + + if (!NBPtr->Ganged || (NBPtr->Dct == 1)) { + // If in ganged mode, need to switch back to DCT0 to set the registers. + if (NBPtr->Ganged || NBPtr->IsSupported[CheckSetSameDctODTsEn]) { + NBPtr->SwitchDCT (NBPtr, 0); + ChannelPtr = NBPtr->ChannelPtr; + } + // If all dram devices on a DCT support ODTS + if (ODTSEn) { + NBPtr->SetBitField (NBPtr, BFODTSEn, 1); + } + ChannelPtr->ExtendTmp = ExtendTmp; + } + } + IDS_HDT_CONSOLE (MEM_FLOW, "\tDct %d\n", Dct); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tODTSEn = %d\n", ODTSEn); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tExtendTmp = %d\n", ExtendTmp); + } + } + return TRUE; +} + + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h new file mode 100644 index 0000000000..df7603f2e3 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h @@ -0,0 +1,79 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfodthermal.h + * + * Header file for On-Dimm thermal management. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _MFODTHERMAL_H_ +#define _MFODTHERMAL_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFOnDimmThermal ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif //_MFODTHERMAL_H_ diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.c new file mode 100644 index 0000000000..5f83000a45 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.c @@ -0,0 +1,171 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfspr.c + * + * Feature enable online spare + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Olspare) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "mfspr.h" +#include "Ids.h" +#include "amdlib.h" +#include "Filecode.h" +#include "GeneralServices.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_OLSPARE_MFSPR_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * Enable online spare on current node if it is requested. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFOnlineSpare ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + UINT8 q; + UINT8 Value8; + BOOLEAN Flag; + BOOLEAN OnlineSprEnabled[MAX_CHANNELS_PER_SOCKET]; + + MEM_PARAMETER_STRUCT *RefPtr; + DIE_STRUCT *MCTPtr; + + ASSERT (NBPtr != NULL); + + RefPtr = NBPtr->RefPtr; + Flag = FALSE; + if (RefPtr->EnableOnLineSpareCtl != 0) { + RefPtr->GStatus[GsbEnDIMMSpareNW] = TRUE; + MCTPtr = NBPtr->MCTPtr; + + // Check if online spare can be enabled on current node + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + ASSERT (Dct < sizeof (OnlineSprEnabled)); + NBPtr->SwitchDCT (NBPtr, Dct); + OnlineSprEnabled[Dct] = FALSE; + if ((MCTPtr->GangedMode == 0) || (MCTPtr->Dct == 0)) { + if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { + // Make sure at least two chip-selects are available + Value8 = LibAmdBitScanReverse (NBPtr->DCTPtr->Timings.CsEnabled); + if (Value8 > LibAmdBitScanForward (NBPtr->DCTPtr->Timings.CsEnabled)) { + OnlineSprEnabled[Dct] = TRUE; + Flag = TRUE; + } else { + PutEventLog (AGESA_ERROR, MEM_ERROR_DIMM_SPARING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); + MCTPtr->ErrStatus[EsbSpareDis] = TRUE; + } + } + } + } + + // If we don't have spared rank on any DCT, we don't run the rest part of the code. + if (!Flag) { + return FALSE; + } + + MCTPtr->NodeMemSize = 0; + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + if (OnlineSprEnabled[Dct]) { + // Only run StitchMemory if we need to set a spare rank. + NBPtr->DCTPtr->Timings.DctMemSize = 0; + for (q = 0; q < MAX_CS_PER_CHANNEL; q++) { + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + q, 0); + } + Flag = NBPtr->StitchMemory (NBPtr); + ASSERT (Flag == TRUE); + } else if ((MCTPtr->GangedMode == 0) && (NBPtr->DCTPtr->Timings.DctMemSize != 0)) { + // Otherwise, need to adjust the memory size on the node. + MCTPtr->NodeMemSize += NBPtr->DCTPtr->Timings.DctMemSize; + MCTPtr->NodeSysLimit = MCTPtr->NodeMemSize - 1; + } + } + return TRUE; + } else { + return FALSE; + } +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.h b/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.h new file mode 100644 index 0000000000..fccdb0f4cf --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/OLSPARE/mfspr.h @@ -0,0 +1,81 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfspr.h + * + * Feature enable Online spare + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _MFSPR_H_ +#define _MFSPR_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemFOnlineSpare ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MFSPR_H_ */ + + diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfParallelTraining.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfParallelTraining.c new file mode 100644 index 0000000000..4cc3771786 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfParallelTraining.c @@ -0,0 +1,286 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfParallelTraining.c + * + * This is the parallel training feature + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/PARTRN) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + + +#include "AGESA.h" +#include "amdlib.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "Ids.h" +#include "cpuRegisters.h" +#include "cpuApicUtilities.h" +#include "mfParallelTraining.h" +#include "heapManager.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE + +/*----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ +extern MEM_TECH_CONSTRUCTOR* memTechInstalled[]; + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This is the main function to perform parallel training on all nodes. + * This is the routine which will run on the remote AP. + * + * @param[in,out] *EnvPtr - Pointer to the Training Environment Data + * @param[in,out] *StdHeader - Pointer to the Standard Header of the AP + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ +BOOLEAN +MemFParallelTraining ( + IN OUT REMOTE_TRAINING_ENV *EnvPtr, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ) +{ + MEM_PARAMETER_STRUCT ParameterList; + MEM_NB_BLOCK NB; + MEM_TECH_BLOCK TB; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + MEM_DATA_STRUCT *MemPtr; + DIE_STRUCT *MCTPtr; + UINT8 p; + UINT8 i; + UINT8 Dct; + UINT8 Channel; + UINT8 *BufferPtr; + UINT8 DctCount; + UINT8 ChannelCount; + UINT8 RowCount; + UINT8 ColumnCount; + UINT16 SizeOfNewBuffer; + AP_DATA_TRANSFER ReturnData; + + // + // Initialize Parameters + // + ReturnData.DataPtr = NULL; + ReturnData.DataSizeInDwords = 0; + ReturnData.DataTransferFlags = 0; + + ASSERT (EnvPtr != NULL); + // + // Replace Standard header of a AP + // + LibAmdMemCopy (StdHeader, &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(EnvPtr->StdHeader)); + + + // + // Allocate buffer for training data + // + BufferPtr = (UINT8 *) (&EnvPtr->DieStruct); + DctCount = EnvPtr->DieStruct.DctCount; + BufferPtr += sizeof (DIE_STRUCT); + ChannelCount = ((DCT_STRUCT *) BufferPtr)->ChannelCount; + BufferPtr += DctCount * sizeof (DCT_STRUCT); + RowCount = ((CH_DEF_STRUCT *) BufferPtr)->RowCount; + ColumnCount = ((CH_DEF_STRUCT *) BufferPtr)->ColumnCount; + + SizeOfNewBuffer = sizeof (DIE_STRUCT) + + DctCount * ( + sizeof (DCT_STRUCT) + ( + ChannelCount * ( + sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + ( + RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES + + (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) + ) + ) + ) + ); + AllocHeapParams.RequestedBufferSize = SizeOfNewBuffer; + AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0); + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) { + BufferPtr = AllocHeapParams.BufferPtr; + LibAmdMemCopy ( BufferPtr, + &(EnvPtr->DieStruct), + sizeof (DIE_STRUCT) + DctCount * (sizeof (DCT_STRUCT) + ChannelCount * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))), + StdHeader + ); + + // + // Fix up pointers + // + MCTPtr = (DIE_STRUCT *) BufferPtr; + BufferPtr += sizeof (DIE_STRUCT); + MCTPtr->DctData = (DCT_STRUCT *) BufferPtr; + BufferPtr += MCTPtr->DctCount * sizeof (DCT_STRUCT); + for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) { + MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) BufferPtr; + BufferPtr += MCTPtr->DctData[Dct].ChannelCount * sizeof (CH_DEF_STRUCT); + for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) { + MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = MCTPtr; + MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &MCTPtr->DctData[Dct]; + } + } + NB.PSBlock = (MEM_PS_BLOCK *) BufferPtr; + BufferPtr += DctCount * ChannelCount * sizeof (MEM_PS_BLOCK); + + ReturnData.DataPtr = AllocHeapParams.BufferPtr; + ReturnData.DataSizeInDwords = (SizeOfNewBuffer + 3) / 4; + ReturnData.DataTransferFlags = 0; + + // + // Allocate Memory for the MEM_DATA_STRUCT we will use + // + AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT); + AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) { + MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr; + + LibAmdMemCopy (&(MemPtr->StdHeader), &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), StdHeader); + + // + // Copy Parameters from environment + // + ParameterList.HoleBase = EnvPtr->HoleBase; + ParameterList.BottomIo = EnvPtr->BottomIo; + ParameterList.UmaSize = EnvPtr->UmaSize; + ParameterList.SysLimit = EnvPtr->SysLimit; + ParameterList.TableBasedAlterations = EnvPtr->TableBasedAlterations; + ParameterList.PlatformMemoryConfiguration = EnvPtr->PlatformMemoryConfiguration; + MemPtr->ParameterListPtr = &ParameterList; + + for (p = 0; p < MAX_PLATFORM_TYPES; p++) { + MemPtr->GetPlatformCfg[p] = EnvPtr->GetPlatformCfg[p]; + } + + MemPtr->ErrorHandling = EnvPtr->ErrorHandling; + // + // Create Local NBBlock and Tech Block + // + EnvPtr->NBBlockCtor (&NB, MCTPtr, EnvPtr->FeatPtr); + NB.RefPtr = &ParameterList; + NB.MemPtr = MemPtr; + i = 0; + while (memTechInstalled[i] != NULL) { + if (memTechInstalled[i] (&TB, &NB)) { + break; + } + i++; + } + NB.TechPtr = &TB; + NB.TechBlockSwitch (&NB); + + // + // Setup CPU Mem Type MSRs on the AP + // + NB.CpuMemTyping (&NB); + + IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NB.Node); + // + // Call Technology Specific Training routine + // + NB.TrainingFlow (&NB); + // + // Copy training data to ReturnData buffer + // + LibAmdMemCopy ( BufferPtr, + MCTPtr->DctData[0].ChData[0].RcvEnDlys, + ((DctCount * ChannelCount) * ( + (RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES) + + (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) + ) + ), + StdHeader); + + HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader); + // + // Restore pointers + // + for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) { + for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) { + MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = &EnvPtr->DieStruct; + MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &EnvPtr->DieStruct.DctData[Dct]; + + MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RcvEnDlys; + MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDqsDlys; + MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsDlys; + MCTPtr->DctData[Dct].ChData[Channel].WrDatDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatDlys; + MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMinDlys; + MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMaxDlys; + MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMinDlys; + MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMaxDlys; + MCTPtr->DctData[Dct].ChData[Channel].FailingBitMask = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].FailingBitMask; + } + MCTPtr->DctData[Dct].ChData = EnvPtr->DieStruct.DctData[Dct].ChData; + } + MCTPtr->DctData = EnvPtr->DieStruct.DctData; + } + + // + // Signal to BSP that training is complete and Send Results + // + ASSERT (ReturnData.DataPtr != NULL); + ApUtilTransmitBuffer (EnvPtr->BspSocket, EnvPtr->BspCore, &ReturnData, StdHeader); + + // + // Clean up and exit. + // + HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0), StdHeader); + } else { + MCTPtr = &EnvPtr->DieStruct; + PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA, MCTPtr->NodeId, 0, 0, 0, StdHeader); + SetMemError (AGESA_FATAL, MCTPtr); + ASSERT(FALSE); // Could not allocate heap for buffer for parallel training data + } + return TRUE; +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfStandardTraining.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfStandardTraining.c new file mode 100644 index 0000000000..9e64bcf0e8 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/PARTRN/mfStandardTraining.c @@ -0,0 +1,88 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfStandardTraining.c + * + * This is the standard training routine which performs all training from the BSP + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/PARTRN) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + + +#include "AGESA.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "Ids.h" +#include "mfStandardTraining.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE +/*----------------------------------------------------------------------------- +* EXPORTED FUNCTIONS +* +*----------------------------------------------------------------------------- +*/ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This is the main function to perform memory training on all nodes from + * the BSP only. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ +BOOLEAN +MemFStandardTraining ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + ASSERT (NBPtr != NULL); + + NBPtr->TrainingFlow (NBPtr); + return TRUE; +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/S3/mfs3.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/S3/mfs3.c new file mode 100644 index 0000000000..b51db06a5b --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/S3/mfs3.c @@ -0,0 +1,714 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfs3.c + * + * Main S3 resume memory Entrypoint file + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/FEAT/S3) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "mport.h" +#include "Ids.h" +#include "cpuRegisters.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "S3.h" +#include "mfs3.h" +#include "heapManager.h" +#include "amdlib.h" +#include "GeneralServices.h" +#include "cpuFamilyTranslation.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_S3_MFS3_FILECODE + +extern MEM_NB_SUPPORT memNBInstalled[]; + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function is the main memory entry point for the S3 resume sequence + * Requirements: + * + * Run-Time Requirements: + * 1. Complete Hypertransport Bus Configuration + * 4. BSP in Big Real Mode + * 5. Stack available + * + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +AmdMemS3Resume ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + MEM_MAIN_DATA_BLOCK mmData; + S3_MEM_NB_BLOCK *S3NBPtr; + MEM_DATA_STRUCT *MemData; + UINT8 Die; + UINT8 DieCount; + + //--------------------------------------------- + // Creation of NB Block for S3 resume + //--------------------------------------------- + RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + DieCount = mmData.DieCount; + + //--------------------------------------------- + //1. Errata Before resume sequence + //2. S3 Resume sequence + //3. Errata After resume sequence + //--------------------------------------------- + for (Die = 0; Die < DieCount; Die ++) { + if (!S3NBPtr[Die].MemS3Resume (&S3NBPtr[Die], Die)) { + return AGESA_FATAL; + } + S3NBPtr[Die].MemS3RestoreScrub (S3NBPtr[Die].NBPtr, Die); + } + + HeapDeallocateBuffer (AMD_MEM_S3_DATA_HANDLE, StdHeader); + return AGESA_SUCCESS; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function deallocates heap space allocated in memory S3 resume. + * + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemS3Deallocate ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + AGESA_STATUS tempRetVal; + + RetVal = AGESA_SUCCESS; + tempRetVal = HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0), StdHeader); + if (tempRetVal > RetVal) { + RetVal = tempRetVal; + } + tempRetVal = HeapDeallocateBuffer (AMD_MEM_AUTO_HANDLE, StdHeader); + if (tempRetVal > RetVal) { + RetVal = tempRetVal; + } + RetVal = HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, StdHeader); + if (tempRetVal > RetVal) { + RetVal = tempRetVal; + } + RetVal = HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader); + if (tempRetVal > RetVal) { + RetVal = tempRetVal; + } + return RetVal; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function is the entrance to get device list for memory registers. + * + * @param[in, out] **DeviceBlockHdrPtr - Pointer to the memory containing the + * device descriptor list + * @param[in] *StdHeader - Config handle for library and services + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemFS3GetDeviceList ( + IN OUT DEVICE_BLOCK_HEADER **DeviceBlockHdrPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + UINT16 BufferSize; + UINT64 BufferOffset; + S3_MEM_NB_BLOCK *S3NBPtr; + MEM_DATA_STRUCT *MemData; + MEM_MAIN_DATA_BLOCK mmData; + UINT8 Die; + UINT8 DieCount; + AGESA_STATUS RetVal; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + DESCRIPTOR_GROUP DeviceDescript[MAX_NODES_SUPPORTED]; + BufferSize = 0; + + //--------------------------------------------- + // Creation of NB Block for S3 resume + //--------------------------------------------- + RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + DieCount = mmData.DieCount; + + // Get the mask bit and the register list for node that presents + for (Die = 0; Die < DieCount; Die ++) { + S3NBPtr->MemS3GetConPCIMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]); + S3NBPtr->MemS3GetConMSRMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]); + BufferSize = BufferSize + S3NBPtr->MemS3GetRegLstPtr (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]); + } + + // Base on the size of the device list, apply for a buffer for it. + AllocHeapParams.RequestedBufferSize = BufferSize + sizeof (DEVICE_BLOCK_HEADER); + AllocHeapParams.BufferHandle = AMD_S3_NB_INFO_BUFFER_HANDLE; + AGESA_TESTPOINT (TpIfBeforeAllocateMemoryS3SaveBuffer, StdHeader); + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) { + return AGESA_FATAL; + } + AGESA_TESTPOINT (TpIfAfterAllocateMemoryS3SaveBuffer, StdHeader); + + *DeviceBlockHdrPtr = (DEVICE_BLOCK_HEADER *) AllocHeapParams.BufferPtr; + (*DeviceBlockHdrPtr)->RelativeOrMaskOffset = (UINT16) AllocHeapParams.RequestedBufferSize; + + // Copy device list on the stack to the heap. + BufferOffset = sizeof (DEVICE_BLOCK_HEADER) + (UINT64) AllocHeapParams.BufferPtr; + for (Die = 0; Die < DieCount; Die ++) { + for (i = PRESELFREF; i <= POSTSELFREF; i ++) { + // Copy PCI device descriptor to the heap if it exists. + if (DeviceDescript[Die].PCIDevice[i].RegisterListID != 0xFFFFFFFF) { + LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (PCI_DEVICE_DESCRIPTOR), StdHeader); + (*DeviceBlockHdrPtr)->NumDevices ++; + BufferOffset += sizeof (PCI_DEVICE_DESCRIPTOR); + } + // Copy conditional PCI device descriptor to the heap if it exists. + if (DeviceDescript[Die].CPCIDevice[i].RegisterListID != 0xFFFFFFFF) { + LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].CPCIDevice[i]), sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR), StdHeader); + (*DeviceBlockHdrPtr)->NumDevices ++; + BufferOffset += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR); + } + // Copy MSR device descriptor to the heap if it exists. + if (DeviceDescript[Die].MSRDevice[i].RegisterListID != 0xFFFFFFFF) { + LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].MSRDevice[i]), sizeof (MSR_DEVICE_DESCRIPTOR), StdHeader); + (*DeviceBlockHdrPtr)->NumDevices ++; + BufferOffset += sizeof (MSR_DEVICE_DESCRIPTOR); + } + // Copy conditional MSR device descriptor to the heap if it exists. + if (DeviceDescript[Die].CMSRDevice[i].RegisterListID != 0xFFFFFFFF) { + LibAmdMemCopy ((VOID *) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR), StdHeader); + (*DeviceBlockHdrPtr)->NumDevices ++; + BufferOffset += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR); + } + } + } + + return RetVal; +} + + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initialize the northbridge block and apply for heap space + * before any function call is made to memory component during S3 resume. + * + * @param[in] *StdHeader - Config handle for library and services + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemS3ResumeInitNB ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + MEM_MAIN_DATA_BLOCK mmData; + S3_MEM_NB_BLOCK *S3NBPtr; + MEM_DATA_STRUCT *MemData; + UINT8 Die; + UINT8 DieCount; + UINT8 SpecialCaseHeapSize; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + S3_SPECIAL_CASE_HEAP_HEADER SpecialHeapHeader[MAX_NODES_SUPPORTED]; + + SpecialCaseHeapSize = 0; + + //--------------------------------------------- + // Creation of NB Block for S3 resume + //--------------------------------------------- + RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + DieCount = mmData.DieCount; + + //-------------------------------------------------- + // Apply for heap space for special case registers + //-------------------------------------------------- + for (Die = 0; Die < DieCount; Die ++) { + // Construct the header for the special case heap. + SpecialHeapHeader[Die].Node = S3NBPtr[Die].NBPtr->Node; + SpecialHeapHeader[Die].Offset = SpecialCaseHeapSize + (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER))); + SpecialCaseHeapSize = SpecialCaseHeapSize + S3NBPtr->MemS3SpecialCaseHeapSize; + } + AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER))) + SpecialCaseHeapSize; + AllocHeapParams.BufferHandle = AMD_MEM_S3_DATA_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) { + PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS, S3NBPtr[Die].NBPtr->Node, 0, 0, 0, StdHeader); + SetMemError (AGESA_FATAL, S3NBPtr[Die].NBPtr->MCTPtr); + ASSERT(FALSE); // Could not allocate heap space for "S3_SPECIAL_CASE_HEAP_HEADER" + return AGESA_FATAL; + } + LibAmdMemCopy ((VOID *) AllocHeapParams.BufferPtr, (VOID *) SpecialHeapHeader, (sizeof (S3_SPECIAL_CASE_HEAP_HEADER) * DieCount), StdHeader); + return AGESA_SUCCESS; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the PCI device register list according to the register + * list ID. + * + * @param[in] *Device - pointer to the PCI_DEVICE_DESCRIPTOR + * @param[out] **RegisterHdr - pointer to the address of the register list + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemFS3GetPciDeviceRegisterList ( + IN PCI_DEVICE_DESCRIPTOR *Device, + OUT PCI_REGISTER_BLOCK_HEADER **RegisterHdr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + S3_MEM_NB_BLOCK *S3NBPtr; + VOID *RegisterHeader; + LOCATE_HEAP_PTR LocHeap; + AGESA_BUFFER_PARAMS LocBufferParams; + LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE; + + LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader); + LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE; + + AGESA_TESTPOINT (TpIfBeforeLocateS3PciBuffer, StdHeader); + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr + return AGESA_FATAL; + } + AGESA_TESTPOINT (TpIfAfterLocateS3PciBuffer, StdHeader); + + // NB block has already been constructed by main block. + // No need to construct it here. + RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader); + *RegisterHdr = (PCI_REGISTER_BLOCK_HEADER *)RegisterHeader; + return RetVal; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the conditional PCI device register list according + * to the register list ID. + * + * @param[in] *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR + * @param[out] **RegisterHdr - pointer to the address of the register list + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemFS3GetCPciDeviceRegisterList ( + IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device, + OUT CPCI_REGISTER_BLOCK_HEADER **RegisterHdr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + S3_MEM_NB_BLOCK *S3NBPtr; + VOID *RegisterHeader; + LOCATE_HEAP_PTR LocHeap; + AGESA_BUFFER_PARAMS LocBufferParams; + + LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader); + LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE; + LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE; + + AGESA_TESTPOINT (TpIfBeforeLocateS3CPciBuffer, StdHeader); + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr + return AGESA_FATAL; + } + AGESA_TESTPOINT (TpIfAfterLocateS3CPciBuffer, StdHeader); + + // NB block has already been constructed by main block. + // No need to construct it here. + RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader); + *RegisterHdr = (CPCI_REGISTER_BLOCK_HEADER *)RegisterHeader; + return RetVal; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the MSR device register list according to the register + * list ID. + * + * @param[in] *Device - pointer to the MSR_DEVICE_DESCRIPTOR + * @param[out] **RegisterHdr - pointer to the address of the register list + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemFS3GetMsrDeviceRegisterList ( + IN MSR_DEVICE_DESCRIPTOR *Device, + OUT MSR_REGISTER_BLOCK_HEADER **RegisterHdr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + S3_MEM_NB_BLOCK *S3NBPtr; + VOID *RegisterHeader; + LOCATE_HEAP_PTR LocHeap; + AGESA_BUFFER_PARAMS LocBufferParams; + + LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader); + LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE; + LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE; + + AGESA_TESTPOINT (TpIfBeforeLocateS3MsrBuffer, StdHeader); + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr + return AGESA_FATAL; + } + AGESA_TESTPOINT (TpIfAfterLocateS3MsrBuffer, StdHeader); + + // NB block has already been constructed by main block. + // No need to construct it here. + RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader); + *RegisterHdr = (MSR_REGISTER_BLOCK_HEADER *)RegisterHeader; + return RetVal; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the conditional MSR device register list according + * to the register list ID. + * + * @param[in] *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR + * @param[out] **RegisterHdr - pointer to the address of the register list + * @param[in] *StdHeader - Config handle for library and services + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemFS3GetCMsrDeviceRegisterList ( + IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device, + OUT CMSR_REGISTER_BLOCK_HEADER **RegisterHdr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS RetVal; + S3_MEM_NB_BLOCK *S3NBPtr; + VOID *RegisterHeader; + LOCATE_HEAP_PTR LocHeap; + AGESA_BUFFER_PARAMS LocBufferParams; + + LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader); + LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE; + LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE; + + + AGESA_TESTPOINT (TpIfBeforeLocateS3CMsrBuffer, StdHeader); + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr + return AGESA_FATAL; + } + AGESA_TESTPOINT (TpIfAfterLocateS3CMsrBuffer, StdHeader); + + // NB block has already been constructed by main block. + // No need to construct it here. + RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader); + *RegisterHdr = (CMSR_REGISTER_BLOCK_HEADER *)RegisterHeader; + return RetVal; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initialize needed data structures for S3 resume. + * + * @param[in, out] **S3NBPtr - Pointer to the pointer of northbridge block. + * @param[in, out] *MemPtr - Pointer to MEM_DATA_STRUCT. + * @param[in, out] *mmData - Pointer to MEM_MAIN_DATA_BLOCK. + * @param[in] *StdHeader - Config handle for library and services. + * + * @return AGESA_STATUS + * - AGESA_ALERT + * - AGESA_FATAL + * - AGESA_SUCCESS + * - AGESA_WARNING + */ +AGESA_STATUS +MemS3InitNB ( + IN OUT S3_MEM_NB_BLOCK **S3NBPtr, + IN OUT MEM_DATA_STRUCT **MemPtr, + IN OUT MEM_MAIN_DATA_BLOCK *mmData, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 i; + AGESA_STATUS RetVal; + LOCATE_HEAP_PTR LocHeap; + MEM_NB_BLOCK *NBPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + UINT8 Die; + UINT8 DieCount; + BOOLEAN SkipScan; + + SkipScan = FALSE; + LocHeap.BufferHandle = AMD_MEM_DATA_HANDLE; + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + // NB block has already been constructed by main block. + // No need to construct it here. + *MemPtr = (MEM_DATA_STRUCT *)LocHeap.BufferPtr; + SkipScan = TRUE; + } else { + AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT); + AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) { + ASSERT(FALSE); // Allocate failed for MEM_DATA_STRUCT + return AGESA_FATAL; + } + *MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr; + } + LibAmdMemCopy (&(*MemPtr)->StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader); + mmData->MemPtr = *MemPtr; + + if (!SkipScan) { + RetVal = MemSocketScan (mmData); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + } else { + // We already have initialize data block, no need to do it again. + mmData->DieCount = mmData->MemPtr->DieCount; + } + DieCount = mmData->DieCount; + + //--------------------------------------------- + // Creation of NB Block for S3 resume + //--------------------------------------------- + // Search for AMD_MEM_AUTO_HANDLE on the heap first. + // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap. + LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE; + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + // NB block has already been constructed by main block. + // No need to construct it here. + *S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_MEM_NB_BLOCK))); + AllocHeapParams.BufferHandle = AMD_MEM_S3_NB_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) { + ASSERT(FALSE); // Could not allocate space for "S3_MEM_NB_BLOCK" + return AGESA_FATAL; + } + *S3NBPtr = (S3_MEM_NB_BLOCK *)AllocHeapParams.BufferPtr; + + LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE; + if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) { + // NB block has already been constructed by main block. + // No need to construct it here. + NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr; + } else { + AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK))); + AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) { + ASSERT(FALSE); // Allocate failed for "MEM_NB_BLOCK" + return AGESA_FATAL; + } + NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr; + } + // Construct each die. + for (Die = 0; Die < DieCount; Die ++) { + i = 0; + ((*S3NBPtr)[Die]).NBPtr = &NBPtr[Die]; + while (memNBInstalled[i].MemS3ResumeConstructNBBlock != 0) { + if (memNBInstalled[i].MemS3ResumeConstructNBBlock ((VOID *)&((*S3NBPtr)[Die]), *MemPtr, Die)) { + break; + } + i++; + }; + if (memNBInstalled[i].MemS3ResumeConstructNBBlock == 0) { + ASSERT(FALSE); // S3 resume NB constructor not found + return AGESA_FATAL; + } + } + } + return AGESA_SUCCESS; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * Waits specified number of 10ns cycles + * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE + * @param[in] Count - Number of 10ns cycles to wait + * + * ---------------------------------------------------------------------------- + */ + +VOID +MemFS3Wait10ns ( + IN UINT32 Count, + IN OUT MEM_DATA_STRUCT *MemPtr + ) +{ + UINT32 TscRate; + UINT64 TargetTsc; + UINT64 CurrentTsc; + CPU_SPECIFIC_SERVICES *FamilySpecificServices; + + ASSERT (Count <= 1000000); + GetCpuServicesOfCurrentCore (&FamilySpecificServices, &MemPtr->StdHeader); + FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRate, &MemPtr->StdHeader); + + LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader); + TargetTsc = CurrentTsc + ((Count * TscRate + 99) / 100); + do { + LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader); + } while (CurrentTsc < TargetTsc); +} diff --git a/src/vendorcode/amd/agesa/Proc/Mem/Feat/TABLE/mftds.c b/src/vendorcode/amd/agesa/Proc/Mem/Feat/TABLE/mftds.c new file mode 100644 index 0000000000..89df264797 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Mem/Feat/TABLE/mftds.c @@ -0,0 +1,324 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mftds.c + * + * Northbridge table drive support file for DR + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/TABLE) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mftds.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_TABLE_MFTDS_FILECODE +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ +#define MAX_BYTELANES_PER_CHANNEL (8 + 1) ///< Max Bytelanes per channel + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +VOID +SetTableValues ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN MEM_TABLE_ALIAS MTPtr + ); + +VOID +SetTableValuesLoop ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN MEM_TABLE_ALIAS *MTPtr, + IN UINT8 time + ); + +/*----------------------------------------------------------------------------- + * + * This function initializes bit field translation table + * + * @param[in,out] *NBPtr - Pointer to the MEM_TABLE_ALIAS structure + * @param[in] time - Indicate the timing for the register which is written. + * + * @return None + * ---------------------------------------------------------------------------- + */ +VOID +MemFInitTableDrive ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 time + ) +{ + MEM_TABLE_ALIAS *MTPtr; + MEM_TABLE_ALIAS *IdsMTPtr; + + ASSERT (NBPtr != NULL); + IdsMTPtr = NULL; + + MTPtr = (MEM_TABLE_ALIAS *) NBPtr->RefPtr->TableBasedAlterations; + + IDS_SKIP_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader)) { + IDS_OPTION_HOOK (IDS_INIT_DRAM_TABLE, NBPtr, &(NBPtr->MemPtr->StdHeader)); + IDS_OPTION_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader)); + } + + SetTableValuesLoop (NBPtr, MTPtr, time); + SetTableValuesLoop (NBPtr, IdsMTPtr, time); +} + +/*----------------------------------------------------------------------------- + * + * This function initializes bit field translation table + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *MTPtr - Pointer to the MEM_TABLE_ALIAS structure + * @param[in] time - Indicate the timing for the register which is written. + * + * @return None + * ---------------------------------------------------------------------------- + */ +VOID +SetTableValuesLoop ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN MEM_TABLE_ALIAS *MTPtr, + IN UINT8 time + ) +{ + UINT8 i; + UINT8 CurDct; + + if (MTPtr != NULL) { + CurDct = NBPtr->Dct; + for (i = 0; MTPtr[i].time != MTEnd; i++) { + if ((MTPtr[i].attr != MTAuto) && (MTPtr[i].time == time)) { + SetTableValues (NBPtr, MTPtr[i]); + } + } + NBPtr->SwitchDCT (NBPtr, CurDct); + } +} + +/*----------------------------------------------------------------------------- + * + * Engine for setting Table Value. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] MTPtr - Pointer to the MEM_TABLE_ALIAS structure + * + * @return None + * ---------------------------------------------------------------------------- + */ +VOID +SetTableValues ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN MEM_TABLE_ALIAS MTPtr + ) +{ + UINT8 AccessType; + UINT16 ByteLane; + UINT8 Dct; + UINT8 i; + UINT8 j; + UINT32 TempVal[36]; + UINT8 *DqsSavePtr; + UINT8 DqsOffset; + BOOLEAN SaveDqs; + + AccessType = 0; + DqsSavePtr = NULL; + SaveDqs = TRUE; + + ASSERT (MTPtr.time <= MTValidTimePointLimit); + ASSERT (MTPtr.attr <= MTAdd); + ASSERT (MTPtr.node <= MTNodes); + ASSERT (MTPtr.dct <= MTDcts); + ASSERT (MTPtr.dimm <= MTDIMMs); + ASSERT (MTPtr.data.s.bytelane <= MTBLs); + + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + if ((MTPtr.dct == MTDcts) || (MTPtr.dct == Dct)) { + NBPtr->SwitchDCT (NBPtr, Dct); + switch (MTPtr.bfindex) { + case BFRcvEnDly: + AccessType = AccessRcvEnDly; + DqsSavePtr = NULL; + break; + case BFWrDatDly: + AccessType = AccessWrDatDly; + DqsSavePtr = NBPtr->ChannelPtr->WrDatDlys; + break; + case BFRdDqsDly: + AccessType = AccessRdDqsDly; + DqsSavePtr = NBPtr->ChannelPtr->RdDqsDlys; + break; + case BFWrDqsDly: + AccessType = AccessWrDqsDly; + DqsSavePtr = NBPtr->ChannelPtr->WrDqsDlys; + break; + case BFPhRecDly: + AccessType = AccessPhRecDly; + SaveDqs = FALSE; + break; + default: + AccessType = 0xFF; + break; + } + if (AccessType == 0xFF) { + if (MTPtr.attr == MTOverride) { + NBPtr->SetBitField (NBPtr, MTPtr.bfindex, MTPtr.data.s.value); + } + if (MTPtr.attr == MTSubtract) { + NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) - MTPtr.data.s.value); + } + if (MTPtr.attr == MTAdd) { + NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) + MTPtr.data.s.value); + } + } else { + // Store the DQS data first + for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) { + for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) { + TempVal[i * MAX_BYTELANES_PER_CHANNEL + j] = NBPtr->GetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j)); + } + } + // + // Single Value with Bytleane mask option + // Indicated by the vtype flag + // + if (MTPtr.vtype == VT_MSK_VALUE) { + // set the value which defined in Memory table. + ByteLane = MTPtr.data.s.bytelane; + for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) { + if ((MTPtr.dimm == MTDIMMs) || (MTPtr.dimm == i)) { + for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) { + DqsOffset = (i * MAX_BYTELANES_PER_CHANNEL + j); + if ((ByteLane & (UINT16)1) != 0) { + if (MTPtr.attr == MTOverride) { + TempVal[DqsOffset] = (UINT16)MTPtr.data.s.value; + } + if (MTPtr.attr == MTSubtract) { + TempVal[DqsOffset] -= (UINT16)MTPtr.data.s.value; + } + if (MTPtr.attr == MTAdd) { + TempVal[DqsOffset] += (UINT16)MTPtr.data.s.value; + } + NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[DqsOffset]); + if (SaveDqs) { + if (DqsSavePtr == NULL) { + NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset]; + } else { + DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset]; + } + } + } + ByteLane = ByteLane >> (UINT16)1; + } + } + } + } else { + // Multiple values specified in a byte array + for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) { + if ((MTPtr.dimm == MTDIMMs) || (MTPtr.dimm == i)) { + for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) { + DqsOffset = (i * MAX_BYTELANES_PER_CHANNEL + j); + if (MTPtr.attr == MTOverride) { + TempVal[DqsOffset] = MTPtr.data.bytelanevalue[j]; + } + if (MTPtr.attr == MTSubtract) { + TempVal[DqsOffset] -= MTPtr.data.bytelanevalue[j]; + } + if (MTPtr.attr == MTAdd) { + TempVal[DqsOffset] += MTPtr.data.bytelanevalue[j]; + } + NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[DqsOffset]); + if (SaveDqs) { + if (DqsSavePtr == NULL) { + NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset]; + } else { + DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset]; + } + } + } + } + } + } + // set the DQS value to left DIMMs. + i = MTPtr.dimm; + while ((i != MTDIMMs) && ((++i) < MAX_DIMMS_PER_CHANNEL)) { + for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) { + NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i, j), (UINT16)TempVal[i * MAX_BYTELANES_PER_CHANNEL + j]); + } + } + } + } + } +} + + + + + + |