diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Include/PlatformMemoryConfiguration.h')
-rwxr-xr-x | src/vendorcode/amd/agesa/f10/Include/PlatformMemoryConfiguration.h | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/agesa/f10/Include/PlatformMemoryConfiguration.h new file mode 100755 index 0000000000..702abda387 --- /dev/null +++ b/src/vendorcode/amd/agesa/f10/Include/PlatformMemoryConfiguration.h @@ -0,0 +1,303 @@ +/** + * @file + * + * AMD Platform Specific Memory Configuration + * + * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: OPTION + * @e \$Revision: 5937 $ @e \$Date: 2009-12-02 03:59:36 -0700 (Wed, 02 Dec 2009) $ + * + */ +/***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_ +#define _PLATFORM_MEMORY_CONFIGURATION_H_ + +/*---------------------------------------------------------------------------------------- + * M I X E D (Definitions And Macros / Typedefs, Structures, Enums) + *---------------------------------------------------------------------------------------- + */ +#ifndef PSO_ENTRY + #define PSO_ENTRY UINT8 +#endif + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S, S T R U C T U R E S, E N U M S + *---------------------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------------------- + * PLATFORM SPECIFIC MEMORY DEFINITIONS + *---------------------------------------------------------------------------------------- + */ +/// +/// Memory Speed and DIMM Population Masks +/// +///< DDR Speed Masks +///< Specifies the DDR Speed on a memory channel +/// +#define ANY_SPEED 0xFFFFFFFF +#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66)) +#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66)) +#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66)) +#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66)) +#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66)) +#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66)) +#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66)) +#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66)) +/// +///< DIMM POPULATION MASKS +///< Specifies the DIMM Population on a channel (can be added together to specify configuration). +///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1 +///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1 +/// +#define ANY_ 0xFF ///< Any dimm configuration the current channel +#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel +#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel +#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel +#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel +#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel +#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel +#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel +#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel +#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel +#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel +#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel +#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel +#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel +#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel +#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel +#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel +/// +///< Number of Dimms on the current channel +///< This is a mask used to indicate the number of dimms in a channel +///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms) +/// +#define ANY_NUM 0xFF ///< Any number of Dimms +#define NO_DIMM 0x00 ///< No Dimms present +#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel +#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel +#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel +#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel + +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Override Definitions for Socket, Channel and Dimm + * This indicates where a platform override will be applied. + * + *---------------------------------------------------------------------------------------- + */ +/// +///< SOCKET MASKS +///< Indicates associated processor sockets to apply override settings +/// +#define ANY_SOCKET 0xFF ///< Apply to all sockets +#define SOCKET0 0x01 ///< Apply to socket 0 +#define SOCKET1 0x02 ///< Apply to socket 1 +#define SOCKET2 0x04 ///< Apply to socket 2 +#define SOCKET3 0x08 ///< Apply to socket 3 +#define SOCKET4 0x10 ///< Apply to socket 4 +#define SOCKET5 0x20 ///< Apply to socket 5 +#define SOCKET6 0x40 ///< Apply to socket 6 +#define SOCKET7 0x80 ///< Apply to socket 7 +/// +///< CHANNEL MASKS +///< Indicates Memory channels where override should be applied +/// +#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels +#define CHANNEL_A 0x01 ///< Apply to Channel A +#define CHANNEL_B 0x02 ///< Apply to Channel B +#define CHANNEL_C 0x04 ///< Apply to Channel C +#define CHANNEL_D 0x08 ///< Apply to Channel D +/// +/// DIMM MASKS +/// Indicates Dimm Slots where override should be applied +/// +#define ALL_DIMMS 0xFF ///< Apply to all dimm slots +#define DIMM0 0x01 ///< Apply to Dimm Slot 0 +#define DIMM1 0x02 ///< Apply to Dimm Slot 1 +#define DIMM2 0x04 ///< Apply to Dimm Slot 2 +#define DIMM3 0x08 ///< Apply to Dimm Slot 3 +/// +/// REGISTER ACCESS MASKS +/// Not supported as an at this time +/// +#define ACCESS_NB0 0x0 +#define ACCESS_NB1 0x1 +#define ACCESS_NB2 0x2 +#define ACCESS_NB3 0x3 +#define ACCESS_NB4 0x4 +#define ACCESS_PHY 0x5 +#define ACCESS_DCT_XT 0x6 + +/*---------------------------------------------------------------------------------------- + * + * Platform Specific Overriding Table Definitions + * + *---------------------------------------------------------------------------------------- + */ + +#define PSO_END 0 ///< Table End +#define PSO_CKE_TRI 1 ///< CKE Tristate Map +#define PSO_ODT_TRI 2 ///< ODT Tristate Map +#define PSO_CS_TRI 3 ///< CS Tristate Map +#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel +#define PSO_CLK_SPEED 5 ///< Clock Speed +#define PSO_DIMM_TYPE 6 ///< Dimm Type +#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map +#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket +#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed +#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel +#define PSO_MEM_TECH 11 ///< Channel Memory Type +#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay +#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V + +/*---------------------------------- + * CONDITIONAL PSO SPECIFIC ENTRIES + *---------------------------------*/ +// Condition Types +#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types +#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block +#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected +#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel +#define PSO_CONDITION_REG 103 // Reserved +#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types +// Action Types +#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types +#define PSO_ACTION_ODT 120 ///< ODT values to override +#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override +#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override +#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override +#define PSO_ACTION_REG 124 // Reserved +#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration +#define PSO_ACTION_MAX 125 ///< End of Action Entry Types +#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_MEMCLK_DIS, 10, SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map + +#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map) \ + PSO_CKE_TRI, 4, SocketID, ChannelID, Bit0Map, Bit1Map + +#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \ + PSO_ODT_TRI, 6, SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map + +#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \ + PSO_CS_TRI, 10, SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map + +#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \ + PSO_MAX_DIMMS, 3, SocketID, ChannelID, NumberOfDimmSlotsPerChannel + +#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \ + PSO_MAX_CHIPSELS, 3, SocketID, ChannelID, NumberOfChipSelectsPerChannel + +#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \ + PSO_MAX_CHNLS, 3, SocketID, ANY_CHANNEL, NumberOfChannelsPerSocket + +#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \ + PSO_BUS_SPEED, 10, SocketID, ChannelID, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \ + BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24) + +#define DRAM_TECHNOLOGY(SocketID, MemTechType) \ + PSO_MEM_TECH, 6, SocketID, ANY_CHANNEL, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24) + +#define WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed) \ + PSO_WL_SEED, 11, SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \ + Byte6Seed, Byte7Seed, ByteEccSeed + +#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \ + PSO_LVDIMM_VOLT1_5_SUPPORT, 3, ANY_SOCKET, ANY_CHANNEL, TRUE + +/*---------------------------------------------------------------------------------------- + * CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ +#define CONDITION_AND \ + PSO_CONDITION_AND, 0 + +#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \ + PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk + +#define COND_SPD(Byte, Mask, Value) \ + PSO_CONDITION_SPD, 3, Byte, Mask, Value + +#define COND_REG(Access, Offset, Mask, Value) \ + PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \ + ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \ + ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF) + +#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \ + PSO_ACTION_ODT, 9, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \ + Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt + +#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \ + PSO_ACTION_ADDRTMG, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF) + +#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \ + PSO_ACTION_ODCCONTROL, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF) + +#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \ + PSO_ACTION_SLEWRATE, 10, \ + ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \ + (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF) + +#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \ + PSO_ACTION_SPEEDLIMIT, 9, \ + ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \ + (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \ + (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \ + (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF) + +/*---------------------------------------------------------------------------------------- + * END OF CONDITIONAL OVERRIDE TABLE MACROS + *---------------------------------------------------------------------------------------- + */ + +#endif // _PLATFORM_MEMORY_CONFIGURATION_H_ |