diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c b/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c deleted file mode 100644 index da77c29c0b..0000000000 --- a/src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c +++ /dev/null @@ -1,246 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * AMD Family_10 Dual-plane Only Support - * - * Performs the "BIOS Configuration for Dual-plane Only Support" as - * described in the BKDG. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: CPU/F10 - * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ -#include "AGESA.h" -#include "amdlib.h" -#include "cpuRegisters.h" -#include "cpuApicUtilities.h" -#include "cpuServices.h" -#include "GeneralServices.h" -#include "cpuFamilyTranslation.h" -#include "cpuF10PowerMgmt.h" -#include "F10PmAsymBoostInit.h" -#include "F10PackageType.h" -#include "Filecode.h" -CODE_GROUP (G1_PEICC) -RDATA_GROUP (G1_PEICC) - -#define FILECODE PROC_CPU_FAMILY_0X10_F10PMDUALPLANEONLYSUPPORT_FILECODE - -/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ -UINT32 -STATIC -SetPstateMSR ( - IN VOID *CPB, - IN AMD_CONFIG_PARAMS *StdHeader - ); - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------*/ -/** - * Family 10h core 0 entry point for performing the "Dual-plane Only Support" algorithm. - * - * The algorithm is as follows: - * // Determine whether algorithm applies to this processor - * if (CPUID Fn8000_0001_EBX[PkgType] == 0001b && (revision C or E) { - * // Determine whether processor is supported in this infrastructure - * if ((F3x1FC[DualPlaneOnly] == 1) && (this is a dual-plane platform)) { - * // Fixup the P-state MSRs - * for (each core in the system) { - * if (CPUID Fn8000_0007[CPB]) { - * Copy MSRC001_0065 as MinPstate; - * Copy MSRC001_0068 to MSRC001_0065; - * Copy MinPstate to MSRC001_0068; - * } else { - * Copy MSRC001_0068 to MSRC001_0064; - * Program MSRC001_0068 = 0; - * } // endif - * for (each MSR in MSRC001_00[68:64]) { - * if (value in MSRC001_00[68:64][IddValue] != 0) { - * Set PstateEn in current MSR to 1; - * } // endif - * } // endfor - * } // endfor - * Set F3xDC[PstateMaxVal] = lowest-performance enabled P-state; - * Set F3xA8[PopDownPstate] = lowest-performance enabled P-state; - * Set F3x64[HtcPstateLimit] = lowest-performance enabled P-state; - * } // endif - * } // endif - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] CpuEarlyParamsPtr Service related parameters (unused). - * @param[in] StdHeader Config handle for library and services. - * - */ -VOID -F10PmDualPlaneOnlySupport ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - AP_TASK TaskPtr; - UINT32 CPB; - UINT32 Core; - UINT32 Socket; - UINT32 Module; - UINT32 Pvimode; - UINT32 LowestPsEn; - UINT32 PciRegister; - UINT32 ActiveCores; - UINT32 ProcessorPackageType; - PCI_ADDR PciAddress; - CPUID_DATA CpuidData; - CPU_LOGICAL_ID LogicalId; - AGESA_STATUS IgnoredSts; - - // get the local node ID - IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts); - GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts); - - // get the package type - ProcessorPackageType = LibAmdGetPackageType (StdHeader); - GetLogicalIdOfCurrentCore (&LogicalId, StdHeader); - if (((LogicalId.Revision & (AMD_F10_Cx | AMD_F10_Ex)) != 0) && ((ProcessorPackageType & PACKAGE_TYPE_AM2R2_AM3) != 0)) { - PciAddress.AddressValue = PRCT_INFO_PCI_ADDR; - LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); - PciAddress.AddressValue = PW_CTL_MISC_PCI_ADDR; - LibAmdPciRead (AccessWidth32, PciAddress, &Pvimode, StdHeader); - if (((PciRegister & 0x80000000) != 0) && (((POWER_CTRL_MISC_REGISTER *) &Pvimode)->PviMode == 0)) { - CPB = 0; - LibAmdCpuidRead (AMD_CPUID_APM, &CpuidData, StdHeader); - if (((CpuidData.EDX_Reg & 0x00000200) >> 9) == 1) { - CPB = 1; - } - - TaskPtr.FuncAddress.PfApTaskIO = SetPstateMSR; - TaskPtr.ExeFlags = TASK_HAS_OUTPUT | WAIT_FOR_CORE; - TaskPtr.DataTransfer.DataTransferFlags = 0; - TaskPtr.DataTransfer.DataSizeInDwords = 1; - TaskPtr.DataTransfer.DataPtr = &CPB; - - GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader); - for (Core = 1; Core < (UINT8) ActiveCores; ++Core) { - ApUtilRunCodeOnSocketCore ((UINT8)0, (UINT8)Core, &TaskPtr, StdHeader); - } - LowestPsEn = ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr); - - PciAddress.AddressValue = CPTC2_PCI_ADDR; - LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); - ((CLK_PWR_TIMING_CTRL2_REGISTER *) &PciRegister)->PstateMaxVal = LowestPsEn; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); - - PciAddress.AddressValue = POPUP_PSTATE_PCI_ADDR; - LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); - ((POPUP_PSTATE_REGISTER *) &PciRegister)->PopDownPstate = LowestPsEn; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); - - PciAddress.AddressValue = HTC_PCI_ADDR; - LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); - ((HTC_REGISTER *) &PciRegister)->HtcPstateLimit = LowestPsEn; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); - } - } -} -/*---------------------------------------------------------------------------------------*/ -/** - * Set P-State MSR. - * - * This function set the P-state MSRs per each core in the system. - * - * @param[in] CPB Contains the value of Asymmetric Boost register - * @param[in] StdHeader Config handle for library and services - * - * @return Return the lowest-performance enabled P-state - */ -UINT32 -STATIC -SetPstateMSR ( - IN VOID *CPB, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT32 dtemp; - UINT32 LowestPsEn; - UINT64 MsrValue; - UINT64 MinMsrValue; - - if (*(UINT32*) CPB != 0) { - LibAmdMsrRead (MSR_PSTATE_1, &MinMsrValue, StdHeader); - LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader); - LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader); - LibAmdMsrWrite (MSR_PSTATE_4, &MinMsrValue, StdHeader); - } else { - LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader); - LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader); - MsrValue = 0; - LibAmdMsrWrite (MSR_PSTATE_4, &MsrValue, StdHeader); - } - - LowestPsEn = 0; - for (dtemp = MSR_PSTATE_0; dtemp <= MSR_PSTATE_4; dtemp++) { - LibAmdMsrRead (dtemp, &MsrValue, StdHeader); - if (((PSTATE_MSR *) &MsrValue)->IddValue != 0) { - MsrValue = MsrValue | BIT63; - LibAmdMsrWrite (dtemp, &MsrValue, StdHeader); - LowestPsEn = dtemp - MSR_PSTATE_0; - } - } - return (LowestPsEn); -} - |