diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f14/Proc/Common/S3SaveState.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f14/Proc/Common/S3SaveState.c | 647 |
1 files changed, 647 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f14/Proc/Common/S3SaveState.c b/src/vendorcode/amd/agesa/f14/Proc/Common/S3SaveState.c new file mode 100644 index 0000000000..7fe7476128 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Common/S3SaveState.c @@ -0,0 +1,647 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * S3 save/restore script + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: GNB + * @e \$Revision: 37640 $ @e \$Date: 2010-09-08 23:01:59 +0800 (Wed, 08 Sep 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "Porting.h" +#include "AMD.h" +#include "AGESA.h" +#include "Ids.h" +#include "amdlib.h" +#include "heapManager.h" +#include "S3SaveState.h" +#include "Filecode.h" +CODE_GROUP (G3_DXE) +RDATA_GROUP (G3_DXE) + +#define FILECODE PROC_COMMON_S3SAVESTATE_FILECODE +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ +extern S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize S3 Script framework + * + * + * + * @param[in] StdHeader Pointer to standard header + */ +AGESA_STATUS +S3ScriptInit ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + return OptionS3ScriptConfiguration.Init (StdHeader); +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize S3 Script framework + * + * + * + * @param[in] StdHeader Pointer to standard header + */ +AGESA_STATUS +S3ScriptInitStateStub ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + return AGESA_SUCCESS; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize S3 Script framework + * + * + * + * @param[in] StdHeader Pointer to standard header + */ +AGESA_STATUS +S3ScriptInitState ( + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS Status; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + AllocHeapParams.RequestedBufferSize = S3_TABLE_LENGTH; + AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); + if (Status == AGESA_SUCCESS) { + ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->TableLength = S3_TABLE_LENGTH; + ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->SaveOffset = sizeof (S3_SAVE_TABLE_HEADER); + ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->Locked = FALSE; + } + return Status; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize S3 Script framework + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in,out] S3SaveTable S3 save table header + */ +AGESA_STATUS +S3SaveStateExtendTableLenth ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN OUT S3_SAVE_TABLE_HEADER **S3SaveTable + ) +{ + AGESA_STATUS Status; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + VOID *TempBuffer; + UINT16 NewTableLength; + UINT16 CurrentTableLength; + //Allocate temporary buffer + NewTableLength = (*S3SaveTable)->TableLength + S3_TABLE_LENGTH_INCREMENT; + AllocHeapParams.RequestedBufferSize = NewTableLength; + AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE; + AllocHeapParams.Persist = StdHeader->HeapStatus; + Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); + if (Status != AGESA_SUCCESS) { + return Status; + } + //Save current table length + CurrentTableLength = (*S3SaveTable)->TableLength; + //Update table length + (*S3SaveTable)->TableLength = NewTableLength; + //Copy S3 save toable to temporary location + LibAmdMemCopy (AllocHeapParams.BufferPtr, *S3SaveTable, CurrentTableLength, StdHeader); + //Save pointer to temp buffer + TempBuffer = AllocHeapParams.BufferPtr; + // Free original S3 save buffer + HeapDeallocateBuffer (AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, StdHeader); + + AllocHeapParams.RequestedBufferSize = NewTableLength; + AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; + AllocHeapParams.Persist = StdHeader->HeapStatus; + Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); + if (Status != AGESA_SUCCESS) { + return Status; + } + LibAmdMemCopy (AllocHeapParams.BufferPtr, TempBuffer, AllocHeapParams.RequestedBufferSize, StdHeader); + *S3SaveTable = (S3_SAVE_TABLE_HEADER*) AllocHeapParams.BufferPtr; + HeapDeallocateBuffer (AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, StdHeader); + return Status; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize S3 Script framework + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[out] S3SaveTable S3 save table header + */ +AGESA_STATUS +S3ScriptGetS3SaveTable ( + IN AMD_CONFIG_PARAMS *StdHeader, + OUT S3_SAVE_TABLE_HEADER **S3SaveTable + ) +{ + AGESA_STATUS Status; + LOCATE_HEAP_PTR LocHeapParams; + LocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; + Status = HeapLocateBuffer (&LocHeapParams, StdHeader); + if (Status != AGESA_SUCCESS) { + *S3SaveTable = NULL; + return Status; + } + *S3SaveTable = (S3_SAVE_TABLE_HEADER *) LocHeapParams.BufferPtr; + return AGESA_SUCCESS; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 write opcode + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] OpCode Operation opcode + * @param[in] Width Width + * @param[in] Address Register address + * @param[in] Count Number of register writes + * @param[in] Buffer Pointer to write buffer + */ +AGESA_STATUS +S3SaveStateSaveWriteOp ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 OpCode, + IN ACCESS_WIDTH Width, + IN UINT64 Address, + IN UINT32 Count, + IN VOID *Buffer + ) +{ + S3_SAVE_TABLE_HEADER *S3SaveTablePtr; + S3_WRITE_OP_HEADER *SaveOffsetPtr; + UINT32 OpCodeLength; + UINT32 WidthLength; + AGESA_STATUS Status; + + Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + if (S3SaveTablePtr->Locked) { + return AGESA_UNSUPPORTED; + } + WidthLength = LibAmdAccessWidth (Width); + OpCodeLength = sizeof (S3_WRITE_OP_HEADER) + WidthLength * Count; + if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { + Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + } + S3_SCRIPT_DEBUG_CODE ( + IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address); + S3SaveDebugPrintHexArray (StdHeader, Buffer, Count, Width); + IDS_HDT_CONSOLE (S3_TRACE, "\n"); + ); + SaveOffsetPtr = (S3_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); + SaveOffsetPtr->OpCode = OpCode; + SaveOffsetPtr->Width = Width; + SaveOffsetPtr->Count = Count; + SaveOffsetPtr->Address = Address; + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_WRITE_OP_HEADER), + Buffer, + WidthLength * Count, + StdHeader + ); + S3SaveTablePtr->SaveOffset += OpCodeLength; + return AGESA_SUCCESS; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 write opcode + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] OpCode Operation opcode + * @param[in] Width Width + * @param[in] Address Register address + * @param[in] Data Pointer to data + * @param[in] DataMask Pointer data mask + */ +AGESA_STATUS +S3SaveStateSaveReadWriteOp ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 OpCode, + IN ACCESS_WIDTH Width, + IN UINT64 Address, + IN VOID *Data, + IN VOID *DataMask + ) +{ + + S3_SAVE_TABLE_HEADER *S3SaveTablePtr; + S3_READ_WRITE_OP_HEADER *SaveOffsetPtr; + UINT32 OpCodeLength; + UINT32 WidthLength; + AGESA_STATUS Status; + + Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + if (S3SaveTablePtr->Locked) { + return AGESA_UNSUPPORTED; + } + WidthLength = LibAmdAccessWidth (Width); + OpCodeLength = sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength * 2; + if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { + Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + } + S3_SCRIPT_DEBUG_CODE ( + IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address); + S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width); + IDS_HDT_CONSOLE (S3_TRACE, " Mask: "); + S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width); + IDS_HDT_CONSOLE (S3_TRACE, "\n"); + ); + SaveOffsetPtr = (S3_READ_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); + SaveOffsetPtr->OpCode = OpCode; + SaveOffsetPtr->Width = Width; + SaveOffsetPtr->Address = Address; + + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER), + Data, + WidthLength, + StdHeader + ); + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength, + DataMask, + WidthLength, + StdHeader + ); + S3SaveTablePtr->SaveOffset += OpCodeLength; + return AGESA_SUCCESS; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 poll opcode + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] OpCode Operation opcode + * @param[in] Width Width + * @param[in] Address Register address + * @param[in] Data Pointer to data + * @param[in] DataMask Pointer data mask + * @param[in] Delay Time delay for poll + */ +AGESA_STATUS +S3SaveStateSavePollOp ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 OpCode, + IN ACCESS_WIDTH Width, + IN UINT64 Address, + IN VOID *Data, + IN VOID *DataMask, + IN UINT64 Delay + ) +{ + + S3_SAVE_TABLE_HEADER *S3SaveTablePtr; + S3_POLL_OP_HEADER *SaveOffsetPtr; + UINT32 OpCodeLength; + UINT32 WidthLength; + AGESA_STATUS Status; + + Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + if (S3SaveTablePtr->Locked) { + return AGESA_UNSUPPORTED; + } + WidthLength = LibAmdAccessWidth (Width); + OpCodeLength = sizeof (S3_POLL_OP_HEADER) + WidthLength * 2; + if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { + Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + } + S3_SCRIPT_DEBUG_CODE ( + IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address); + S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width); + IDS_HDT_CONSOLE (S3_TRACE, " Mask: "); + S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width); + IDS_HDT_CONSOLE (S3_TRACE, "\n"); + ); + SaveOffsetPtr = (S3_POLL_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); + SaveOffsetPtr->OpCode = OpCode; + SaveOffsetPtr->Width = Width; + SaveOffsetPtr->Delay = Delay; + SaveOffsetPtr->Address = Address; + + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER), + Data, + WidthLength, + StdHeader + ); + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER) + WidthLength, + DataMask, + WidthLength, + StdHeader + ); + S3SaveTablePtr->SaveOffset += OpCodeLength; + return AGESA_SUCCESS; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 info opcode + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] OpCode Operation opcode + * @param[in] InformationLength Info length + * @param[in] Information Pointer to information + */ +AGESA_STATUS +S3SaveStateSaveInfoOp ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 OpCode, + IN UINT32 InformationLength, + IN VOID *Information + ) +{ + + S3_SAVE_TABLE_HEADER *S3SaveTablePtr; + S3_INFO_OP_HEADER *SaveOffsetPtr; + UINT32 OpCodeLength; + + AGESA_STATUS Status; + + Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + if (S3SaveTablePtr->Locked) { + return AGESA_UNSUPPORTED; + } + OpCodeLength = sizeof (S3_INFO_OP_HEADER) + InformationLength; + if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { + Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + } + SaveOffsetPtr = (S3_INFO_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); + SaveOffsetPtr->OpCode = OpCode; + SaveOffsetPtr->Length = InformationLength; + S3_SCRIPT_DEBUG_CODE ( + IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: Info: %s \n", Information); + ); + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_INFO_OP_HEADER), + Information, + InformationLength, + StdHeader + ); + S3SaveTablePtr->SaveOffset += OpCodeLength; + return AGESA_SUCCESS; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 dispatch opcode + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] OpCode Operation opcode + * @param[in] FunctionId Function ID + * @param[in] ContextLength Context length + * @param[in] Context Pointer to Context + */ +AGESA_STATUS +S3SaveStateSaveDispatchOp ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 OpCode, + IN UINT16 FunctionId, + IN UINT16 ContextLength, + IN VOID *Context + ) +{ + + S3_SAVE_TABLE_HEADER *S3SaveTablePtr; + S3_DISPATCH_OP_HEADER *SaveOffsetPtr; + UINT32 OpCodeLength; + AGESA_STATUS Status; + + Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + if (S3SaveTablePtr->Locked) { + return AGESA_UNSUPPORTED; + } + OpCodeLength = sizeof (S3_DISPATCH_OP_HEADER) + ContextLength; + if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { + Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); + if (Status != AGESA_SUCCESS) { + return Status; + } + } + S3_SCRIPT_DEBUG_CODE ( + IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Function Id: 0x%02x, Context: ", S3SaveDebugOpcodeString (StdHeader, OpCode), FunctionId); + S3SaveDebugPrintHexArray (StdHeader, Context, ContextLength, AccessWidth8); + IDS_HDT_CONSOLE (S3_TRACE, "\n"); + ); + SaveOffsetPtr = (S3_DISPATCH_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); + SaveOffsetPtr->OpCode = OpCode; + SaveOffsetPtr->Length = ContextLength; + SaveOffsetPtr->FunctionId = FunctionId; + LibAmdMemCopy ( + (UINT8 *) SaveOffsetPtr + sizeof (S3_DISPATCH_OP_HEADER), + Context, + ContextLength, + StdHeader + ); + + S3SaveTablePtr->SaveOffset += OpCodeLength; + return AGESA_SUCCESS; +} + + + + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 debug support + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] Op Opcode + */ +CHAR8* +S3SaveDebugOpcodeString ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN UINT16 Op + ) +{ + switch (Op) { + case SAVE_STATE_IO_WRITE_OPCODE: + return "IO WR"; + case SAVE_STATE_IO_READ_WRITE_OPCODE: + return "IO RD/WR"; + case SAVE_STATE_IO_POLL_OPCODE: + return "IO POLL"; + case SAVE_STATE_MEM_WRITE_OPCODE: + return "MEM WR"; + case SAVE_STATE_MEM_READ_WRITE_OPCODE: + return "MEM RD/WR"; + case SAVE_STATE_MEM_POLL_OPCODE: + return "MEM POLL"; + case SAVE_STATE_PCI_CONFIG_WRITE_OPCODE: + return "PCI WR"; + case SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE: + return "PCI RD/WR"; + case SAVE_STATE_PCI_CONFIG_POLL_OPCODE: + return "PCI POLL"; + case SAVE_STATE_STALL_OPCODE: + return "STALL"; + case SAVE_STATE_DISPATCH_OPCODE: + return "DISPATCH"; + default: + IDS_ERROR_TRAP; + } + return "!!! Unrecognize opcode !!!"; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Save S3 debug support + * + * + * + * @param[in] StdHeader Pointer to standard header + * @param[in] Array Array + * @param[in] Count Count of element in array + * @param[in] Width Array Element width + */ +VOID +S3SaveDebugPrintHexArray ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN VOID *Array, + IN UINT32 Count, + IN ACCESS_WIDTH Width + ) +{ + UINTN Index; + + for (Index = 0; Index < Count; Index++) { + switch (Width) { + case AccessWidth8: + case AccessS3SaveWidth8: + IDS_HDT_CONSOLE (S3_TRACE, "0x%02x", *((UINT8*)Array + Index)); + break; + case AccessWidth16: + case AccessS3SaveWidth16: + IDS_HDT_CONSOLE (S3_TRACE, "0x%04x", *((UINT16*)Array + Index)); + break; + case AccessWidth32: + case AccessS3SaveWidth32: + IDS_HDT_CONSOLE (S3_TRACE, "0x%08x", *((UINT32*)Array + Index)); + break; + case AccessWidth64: + case AccessS3SaveWidth64: + IDS_HDT_CONSOLE (S3_TRACE, "0x%08x%08x", ((UINT32*) ((UINT64*)Array + Index)[1], ((UINT32*) ((UINT64*)Array + Index))[0])); + break; + default: + IDS_ERROR_TRAP; + } + if (Index < (Count - 1)) { + IDS_HDT_CONSOLE (S3_TRACE, ", "); + } + } +} |