diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c new file mode 100644 index 0000000000..6f2249b5af --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c @@ -0,0 +1,274 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mardr2.c + * + * Platform specific settings for DR DDR2 L1 system + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support L1 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DR_MARDR2_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DrRDdr2CLKDis[] = {0x00, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0x00}; + +// Chip select 0, 1, 4, 5 maps to M[B,A]_CKE[0] +// Chip select 2, 3, 6, 7 maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DrRDdr2CKETri[] = {0x33, 0xCC}; + +// 2 dimms per channel +// Dimm 0: BP_MEMODTx[2,0] +// Dimm 1: BP_MEMODTx[3,1] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8}; +// 4 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[1] +// Dimm 2: BP_MEMODTx[2] +// Dimm 3: BP_MEMODTx[3] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0}; + +// BIOS must not tri-state chip select pin corresponding to the second chip +// select of a single rank registered dimm +STATIC CONST UINT8 ROMDATA DrRDdr2CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DR DDR2 L1 system + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgRDr2 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST ADV_PSCFG_ENTRY PSCfg4D[] = { + {ANY_, ANY_, 0x00000000, 0x00111222, 1}, + {ANY_, ANY_, 0x00370000, 0x00111222, 2} + }; + + STATIC CONST ADV_PSCFG_ENTRY PSCfg8D[] = { + {ANY_, ANY_, 0x00000000, 0x00111222, 1}, + {ANY_, ANY_, 0x00370000, 0x00111222, 2}, + {ANY_, ANY_, 0x002F0000, 0x00111222, ANY_} + }; + + CONST ADV_PSCFG_ENTRY *PSCfgPtr; + UINT16 i; + UINT8 MaxDimmPerCH; + UINT16 TabSize; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT16 QRPresent; + UINT16 DRx4Present; + BOOLEAN SlowMode; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR2_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + QRPresent = CurrentChannel->DimmQrPresent; + DRx4Present = CurrentChannel->DimmDrPresent & CurrentChannel->Dimmx4Present; + if (QRPresent) { + Dimms = (Dimms + 1) / 2; + } + + // Table look up + if (MaxDimmPerCH <= 2) { + PSCfgPtr = PSCfg4D; + TabSize = GET_SIZE_OF (PSCfg4D); + } else { + PSCfgPtr = PSCfg8D; + TabSize = GET_SIZE_OF (PSCfg8D); + } + DctOdcCtl = 0; + AddrTmgCTL = 0; + for (i = 0; i < TabSize; i++) { + if ((PSCfgPtr[i].Dimms == ANY_) || (PSCfgPtr[i].Dimms == Dimms)) { + if ((PSCfgPtr[i].Speed == ANY_) || (PSCfgPtr[i].Speed == Speed)) { + if ((PSCfgPtr[i].Loads == ANY_) || (PSCfgPtr[i].Loads >= Loads)) { + AddrTmgCTL = PSCfgPtr[i].AddrTmg; + DctOdcCtl = PSCfgPtr[i].Odc; + break; + } + } + } + } + ASSERT (i == TabSize); + SlowMode = FALSE; // 1T + + // + // Overrides and/or exceptions + // + + if (QRPresent == 0x55) { + // QR for 4DIMM case only + AddrTmgCTL = 0x002F0000; + if (Speed >= DDR667_FREQUENCY) { + DctOdcCtl = 0x00331222; + } + } + + if (Speed >= DDR667_FREQUENCY) { + if ((QRPresent != 0) || (DRx4Present != 0)) { + AddrTmgCTL |= 0x00002F00; + } + if (Dimms >= 3) { + AddrTmgCTL |= 0x0000002F; + } + if (Dimms == 3 || Dimms == 4) { + DctOdcCtl = 0x00331222; + } + } + + // Adjust Processor ODT + if (Dimms == 1) { + DctOdcCtl |= 0x20000000; // 75ohms + } else { + DctOdcCtl |= 0x10000000; // 150ohms + } + + CurrentChannel->MemClkDisMap = (UINT8 *) DrRDdr2CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DrRDdr2CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DrRDdr2CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri3D; + break; + case 4: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri4D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri2D; + } + + CurrentChannel->DctEccDqsLike = 0x0504; + CurrentChannel->DctEccDqsScale = 0; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} |