diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk')
19 files changed, 5812 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/marc32_3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/marc32_3.c new file mode 100644 index 0000000000..7e20815e18 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/marc32_3.c @@ -0,0 +1,594 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * marc32_3.c + * + * Memory Controller, registered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_C32_MARC32_3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA C32RDdr3CLKDis[] = {0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00}; + +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA C32RDdr3CKETri[] = {0x55, 0xAA}; + +// 2 dimms per channel +// Dimm 0: BP_MEMODTx[2,0] +// Dimm 1: BP_MEMODTx[3,1] +STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8}; +// 4 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[1] +// Dimm 2: BP_MEMODTx[2] +// Dimm 3: BP_MEMODTx[3] +STATIC CONST UINT8 ROMDATA C32RDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0}; + +// BIOS must not tri-state chip select pin corresponding to the second chip +// select of a single rank registered dimm +STATIC CONST UINT8 ROMDATA C32RDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for C32 DDR3 L1 system + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to C32 MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to C32 CS table + * @return CurrentChannel->CKETriMap Points this pointer to C32 ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to C32 CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgRC32_3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + // + // Address Timings and Drive Strengths for 1 DIMM per channel or 2 Dimms per Channel + // + // Code searches table for matching speed, then matches the current dimm + // population and # of dimms to current config and programs the Addr Timing and RC2/RC2 + // + // RC2/RC8 Value - This field id dependent upon the number of Registers on the Dimm, as indicated + // in SPD Byte 63. + // Bits 15-12 RC2 if One register + // Bits 11-8 RC8 if One register + // Bits 7-4 RC2 for more than one register + // Bits 3-0 RC8 for more than one register + // + // Frequency, Dimm Config , + // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = { + {DDR667_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR800_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR800_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003C3C3C, 0x0000,1}, + {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003C3C3C, 0x0040, 1}, + {DDR1066_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003A3A3A, 0x0040, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00383A38, 0x4040, 2}, + }; + // + // Address Timings and Drive Strengths for 3 DIMMs per channel + // + // Code searches table for matching speed, then matches the current dimm + // population and # of dimms to current config and programs the Addr Timing and RC2/RC2 + // + // RC2/RC8 Value - This field id dependent upon the number of Registers on the Dimm, as indicated + // in SPD Byte 63. + // Bits 15-12 RC2 if One register + // Bits 11-8 RC8 if One register + // Bits 7-4 RC2 for more than one register + // Bits 3-0 RC8 for more than one register + // + // Frequency, Dimm Config , + // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = { + {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x0000, 1}, + {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4040, 2}, + {DDR667_FREQUENCY, QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4004, 2}, + {DDR667_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00380038, 0x4004, 3}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4040, 2}, + {DDR800_FREQUENCY, QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4004, 2}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00380038, 0x4004, 3}, + {DDR800_FREQUENCY, QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003C3C3C, 0x0000, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3C3A, 0x4040, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + SR_DIMM1 + SR_DIMM2, \ + 0x00373C37, 0x4040, 3}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \ + 0x00383A38, 0x4040, 2}, + }; + + // + // DIMM ODT Pattern (1 or 2 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = { + {SR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1}, + {QR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000505, 0x00000505, 1}, + {SR_DIMM1, \ + 0x00000000, 0x00000000, 0x00020000, 0x00000000, 1}, + {DR_DIMM1, \ + 0x00000000, 0x00000000, 0x02080000, 0x00000000, 1}, + {QR_DIMM1, \ + 0x00000000, 0x00000000, 0x0A0A0000, 0x0A0A0000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x01010202, 0x00000000, 0x09030603, 0x00000000, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \ + 0x01010A0A, 0x01010000, 0x01030E0B, 0x01090000, 2}, + {QR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x05050202, 0x00000202, 0x0D070203, 0x00000206, 2}, + {QR_DIMM0 + QR_DIMM1, \ + 0x05050A0A, 0x05050A0A, 0x05070A0B, 0x050D0A0E, 2} + }; + // DIMM ODT Pattern (3 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = { + {SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1}, + {SR_DIMM0 + DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \ + 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3}, + {QR_DIMM1, \ + 0x00000000, 0x00000000, 0x080A0000, 0x020A0000, 1}, + {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x04040000, 0x04040A0A, 0x04060000, 0x040C0A0E, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \ + 0x01010A0A, 0x01010000, 0x01030A0B, 0x01090000, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x05050E0E, 0x05050B0B, 0x05070E0F, 0x050D0B0F, 3} + }; + // + // DIMM ODT Pattern (4 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg4DIMMsODT[] = { + {ANY_DIMM3, \ + 0x00000000, 0x00000000, 0x00000000, 0x08080000, 1}, + {ANY_DIMM2 + ANY_DIMM3, \ + 0x00000000, 0x04040808, 0x00000000, 0x0C0C0C0C, 2}, + {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \ + 0x0C0C0000, 0x06060A0A, 0x0E0E0000, 0x0E0E0E0E, 3}, + {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \ + 0x0D0D0E0E, 0x07070B0B, 0x0F0F0F0F, 0x0F0F0F0F, 4} + }; + // + // DIMM Write Leveling ODT Pattern 1 or 2 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {QR_DIMM0, {0x05, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}, + {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2} + }; + // + // DIMM Write Leveling ODT Pattern 3 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = { + {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1}, + {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3} + }; + // + // DIMM Write Leveling ODT Pattern 4 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = { + {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1}, + {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2}, + {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3}, + {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4} + }; + + + UINT16 i; + UINT16 j; + UINT8 MaxDimmPerCH; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT16 RC2RC8; + UINT32 PhyRODTCSLow; + UINT32 PhyRODTCSHigh; + UINT32 PhyWODTCSLow; + UINT32 PhyWODTCSHigh; + BOOLEAN SlowMode; + UINT8 PSCfgSize; + UINT8 PSCfgODTSize; + UINT8 PSCfgWlODTSize; + UINT8 PhyWLODT[4]; + + CONST ADV_R_PSCFG_ENTRY *PSCfgPtr; + CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr; + CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != NULL); + ASSERT (CurrentChannel != NULL); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + RC2RC8 = 0; + PhyRODTCSLow = 0; + PhyRODTCSHigh = 0; + PhyWODTCSLow = 0; + PhyWODTCSHigh = 0; + SlowMode = FALSE; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent == 0) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if (MaxDimmPerCH == 4) { + PSCfgPtr = NULL; + PSCfgSize = NULL; + PSCfgODTPtr = PSCfg4DIMMsODT; + PSCfgWlODTPtr = PSCfg4DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg4DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else if (MaxDimmPerCH == 3) { + PSCfgPtr = PSCfg3DIMMs; + PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgODTPtr = PSCfg3DIMMsODT; + PSCfgWlODTPtr = PSCfg3DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else { + PSCfgPtr = PSCfg2DIMMs; + PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgODTPtr = PSCfg2DIMMsODT; + PSCfgWlODTPtr = PSCfg2DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } + + // AddrTmgCTL and DctOdcCtl + if (MaxDimmPerCH != 4) { + for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) { + if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgPtr->Dimms) { + AddrTmgCTL = PSCfgPtr->AddrTmg; + DctOdcCtl = 0x00223222; + RC2RC8 = PSCfgPtr->RC2RC8; + break; + } + } + } + + // + // Overrides and/or exceptions + // + // + // Count slots with SR/DR poulated. + // + DimmTpMatch = 0; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) { + DimmTpMatch++; + } + } + // + // DimmTpMatch is equal to the count of slot that have either an SR or DR + // installed. + // + if (MaxDimmPerCH == 4) { + // + // Any SR/DR in 4 DPCH + // + if (DimmTpMatch > 0) { + DctOdcCtl = 0x00223222; + if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) { + DctOdcCtl = 0x00113222; + } + } + // + // At Least 3 SR/DR in 4 DPCH + // + if (DimmTpMatch >= 3) { + AddrTmgCTL |= 0x002F0000; + } + // At Least 2 SR/DR in 4 DPCH + if (DimmTpMatch >= 2) { + RC2RC8 = 0x4040; + } + } else { + // + // Less than 4 DPCH + // + // + // Only 1 Dimm Populated and its a SR or DR OR + // 3 Dimms Populated and Frequency is 800 MHz + // + if (((Dimms == 1) && (DimmTpMatch == 1)) || + ((Dimms == 3) && ((Speed == DDR800_FREQUENCY) || + (Speed == DDR1066_FREQUENCY)))) { + DctOdcCtl = 0x00113222; + } + } + + //RC2 and RC8 + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution. + if (CurrentChannel->CtrlWrd02[j] > 0) { + if (CurrentChannel->CtrlWrd02[j] == 1) { + // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F; + } else { + // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F; + } + } + } + + //Programmable ODT + for (i = 0; i < PSCfgODTSize; i++, PSCfgODTPtr++) { + if (Dimms != PSCfgODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgODTPtr->Dimms) { + PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow; + PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh; + PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow; + PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh; + break; + } + } + + //WLODT + for (i = 0; i < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) { + if (Dimms != PSCfgWlODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgWlODTPtr->Dimms) { + PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3]; + break; + } + } + + // Set ProcODT + DctOdcCtl |= 0x20000000; + + CurrentChannel->MemClkDisMap = (UINT8 *) C32RDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) C32RDdr3CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) C32RDdr3CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri3D; + break; + case 4: + CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri4D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) C32RDdr3ODTTri2D; // Most conservative + } + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCSLow; + CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh; + CurrentChannel->PhyWODTCSLow = PhyWODTCSLow; + CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/mauc32_3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/mauc32_3.c new file mode 100644 index 0000000000..5abc720cc4 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/C32/mauc32_3.c @@ -0,0 +1,357 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mauc32_3.c + * + * Platform specific settings for C32 DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_C32_MAUC32_3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA C32UDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA C32UDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA C32UDdr3ODTTri2D[] = {0x01, 0x04, 0x02, 0x08}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA C32UDdr3ODTTri3D[] = {0xFF, 0xFF, 0xFF, 0xFF}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA C32UDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for C32 DDR3 unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to C32 MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to C32 CS table + * @return CurrentChannel->CKETriMap Points this pointer to C32 ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to C32 CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgUC32_3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = { + {SR_DIMM0, 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1}, + {SR_DIMM1, 0x00000000,0x00000000,0x00020000, 0x00000000, 1}, + {DR_DIMM1, 0x00000000,0x00000000,0x02080000, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 0x01010202,0x00000000,0x09030603, 0x00000000, 2}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = { + {SR_DIMM2 + DR_DIMM2, 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1}, + //{SR_DIMM0 + DR_DIMM0, 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2}, + //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = { + {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1}, + //{SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2}, + //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3}, + }; + + UINT16 i; + UINT16 j; + UINT8 MaxDimmPerCH; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT32 PhyRODTCSLow; + UINT32 PhyRODTCSHigh; + UINT32 PhyWODTCSLow; + UINT32 PhyWODTCSHigh; + UINT8 PhyWLODT[4]; + UINT8 PSCfgODTSize; + UINT8 PSCfgWlODTSize; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr; + CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != NULL); + ASSERT (CurrentChannel != NULL); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyRODTCSLow = 0; + PhyRODTCSHigh = 0; + PhyWODTCSLow = 0; + PhyWODTCSHigh = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_C32) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + ASSERT (i < GET_SIZE_OF (PSCfg)); + + if (MaxDimmPerCH == 3) { + PSCfgODTPtr = PSCfg3DIMMsODT; + PSCfgWlODTPtr = PSCfg3DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else { + PSCfgODTPtr = PSCfg2DIMMsODT; + PSCfgWlODTPtr = PSCfg2DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } + + // Programmable ODT + for (i = 0; i < PSCfgODTSize; i++, PSCfgODTPtr++) { + if (Dimms != PSCfgODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgODTPtr->Dimms) { + PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow; + PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh; + PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow; + PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh; + break; + } + } + + // WL ODT + for (i = 0; i < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) { + if (Dimms != PSCfgWlODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgWlODTPtr->Dimms) { + PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (Dimms == 1) { + if (Loads >= 16) { + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x003B0000; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00380000; + } else if (Speed == DDR1333_FREQUENCY) { + AddrTmgCTL = 0x00360000; + } else { + AddrTmgCTL = 0x00340000; + SlowMode = TRUE; + } + } else { + AddrTmgCTL = 0; + } + DctOdcCtl = 0x20113222; + } + + CurrentChannel->MemClkDisMap = (UINT8 *) C32UDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) C32UDdr3CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) C32UDdr3CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) C32UDdr3ODTTri3D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) C32UDdr3ODTTri2D; // Most conservative + } + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCSLow; + CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh; + CurrentChannel->PhyWODTCSLow = PhyWODTCSLow; + CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda2.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda2.c new file mode 100644 index 0000000000..e8ca7d2ba9 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda2.c @@ -0,0 +1,207 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * masda2.c + * + * Platform specific settings for DA DDR2 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support S1g3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DA_MASDA2_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DASDdr2CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DASDdr2CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA DASDdr2ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA DASDdr2CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DA DDR2 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSDA2 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR400_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222}, + {DDR533_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222}, + {DDR667_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222}, + {DDR800_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222}, + }; + + UINT16 i; + UINT8 Loads; + UINT8 Ranks; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + BOOLEAN SlowMode; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR2_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Loads = CurrentChannel->Loads; + Ranks = CurrentChannel->Ranks; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + SlowMode = FALSE; // 1T + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg)); + + // + // Overrides and/or exceptions + // + if (Loads == 16) { + if ((Speed == DDR533_FREQUENCY) && (Ranks == 2)) { + AddrTmgCTL = 0x002C2C2C; + } else if ((Speed == DDR667_FREQUENCY) && (Ranks == 1)) { + AddrTmgCTL = 0x00272727; + } else if ((Speed == DDR667_FREQUENCY) && (Ranks == 2)) { + AddrTmgCTL = 0x00002828; + SlowMode = TRUE; // 2T + } else if ((Speed == DDR800_FREQUENCY) && (Ranks == 1)) { + AddrTmgCTL = 0x00292929; + } else if ((Speed == DDR800_FREQUENCY) && (Ranks == 2)) { + AddrTmgCTL = 0x00002F2F; + SlowMode = TRUE; // 2T + } + } + CurrentChannel->MemClkDisMap = (UINT8 *) DASDdr2CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DASDdr2CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) DASDdr2ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DASDdr2CSTri; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda3.c new file mode 100644 index 0000000000..8ac6b4db92 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/masda3.c @@ -0,0 +1,261 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * masda3.c + * + * Platform specific settings for DA DDR3 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support S1g4 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DA_MASDA3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DASDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DASDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA DASDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA DASDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DA DDR3 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSDA3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222}, + {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222}, + {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 MaxDimmPerCH; + UINT8 *DimmsPerChPtr; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + SlowMode = FALSE; // 1T + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (MaxDimmPerCH == 2) { + if (Dimms == 2) { + DctOdcCtl = 0x20223323; + SlowMode = TRUE; + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x00000039; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00000037; + } + } else { + DctOdcCtl = 0x20113222; + } + } else { + if (CurrentChannel->DimmSRPresent != 0) { + PhyWLODT[0] = 1; + } else if (CurrentChannel->DimmDrPresent != 0) { + PhyWLODT[0] = 4; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) DASDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DASDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) DASDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DASDdr3CSTri; + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/mauda3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/mauda3.c new file mode 100644 index 0000000000..6913973d28 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DA/mauda3.c @@ -0,0 +1,260 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * mauda3.c + * + * Platform specific settings for DA DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DA_MAUDA3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DAUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DAUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA DAUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA DAUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DA DDR3 Unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgUDA3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { + {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, + {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, + {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, + {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} + }; + STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + if (Dimms == 1) { + for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { + if (Speed == PSCfg1Dimm[i].Speed) { + if (Loads >= PSCfg1Dimm[i].Loads) { + AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; + DctOdcCtl = PSCfg1Dimm[i].Odc; + } else { + DctOdcCtl = 0x20113222; + } + break; + } + } + ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); + } else { + for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { + if (Speed == PSCfg2Dimm[i].Speed) { + if (Loads <= PSCfg2Dimm[i].Loads) { + AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; + DctOdcCtl = PSCfg2Dimm[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) DAUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DAUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) DAUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DAUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c new file mode 100644 index 0000000000..6f2249b5af --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr2.c @@ -0,0 +1,274 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mardr2.c + * + * Platform specific settings for DR DDR2 L1 system + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support L1 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DR_MARDR2_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DrRDdr2CLKDis[] = {0x00, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0x00}; + +// Chip select 0, 1, 4, 5 maps to M[B,A]_CKE[0] +// Chip select 2, 3, 6, 7 maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DrRDdr2CKETri[] = {0x33, 0xCC}; + +// 2 dimms per channel +// Dimm 0: BP_MEMODTx[2,0] +// Dimm 1: BP_MEMODTx[3,1] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8}; +// 4 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[1] +// Dimm 2: BP_MEMODTx[2] +// Dimm 3: BP_MEMODTx[3] +STATIC CONST UINT8 ROMDATA DrRDdr2ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0}; + +// BIOS must not tri-state chip select pin corresponding to the second chip +// select of a single rank registered dimm +STATIC CONST UINT8 ROMDATA DrRDdr2CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DR DDR2 L1 system + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgRDr2 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST ADV_PSCFG_ENTRY PSCfg4D[] = { + {ANY_, ANY_, 0x00000000, 0x00111222, 1}, + {ANY_, ANY_, 0x00370000, 0x00111222, 2} + }; + + STATIC CONST ADV_PSCFG_ENTRY PSCfg8D[] = { + {ANY_, ANY_, 0x00000000, 0x00111222, 1}, + {ANY_, ANY_, 0x00370000, 0x00111222, 2}, + {ANY_, ANY_, 0x002F0000, 0x00111222, ANY_} + }; + + CONST ADV_PSCFG_ENTRY *PSCfgPtr; + UINT16 i; + UINT8 MaxDimmPerCH; + UINT16 TabSize; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT16 QRPresent; + UINT16 DRx4Present; + BOOLEAN SlowMode; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR2_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + QRPresent = CurrentChannel->DimmQrPresent; + DRx4Present = CurrentChannel->DimmDrPresent & CurrentChannel->Dimmx4Present; + if (QRPresent) { + Dimms = (Dimms + 1) / 2; + } + + // Table look up + if (MaxDimmPerCH <= 2) { + PSCfgPtr = PSCfg4D; + TabSize = GET_SIZE_OF (PSCfg4D); + } else { + PSCfgPtr = PSCfg8D; + TabSize = GET_SIZE_OF (PSCfg8D); + } + DctOdcCtl = 0; + AddrTmgCTL = 0; + for (i = 0; i < TabSize; i++) { + if ((PSCfgPtr[i].Dimms == ANY_) || (PSCfgPtr[i].Dimms == Dimms)) { + if ((PSCfgPtr[i].Speed == ANY_) || (PSCfgPtr[i].Speed == Speed)) { + if ((PSCfgPtr[i].Loads == ANY_) || (PSCfgPtr[i].Loads >= Loads)) { + AddrTmgCTL = PSCfgPtr[i].AddrTmg; + DctOdcCtl = PSCfgPtr[i].Odc; + break; + } + } + } + } + ASSERT (i == TabSize); + SlowMode = FALSE; // 1T + + // + // Overrides and/or exceptions + // + + if (QRPresent == 0x55) { + // QR for 4DIMM case only + AddrTmgCTL = 0x002F0000; + if (Speed >= DDR667_FREQUENCY) { + DctOdcCtl = 0x00331222; + } + } + + if (Speed >= DDR667_FREQUENCY) { + if ((QRPresent != 0) || (DRx4Present != 0)) { + AddrTmgCTL |= 0x00002F00; + } + if (Dimms >= 3) { + AddrTmgCTL |= 0x0000002F; + } + if (Dimms == 3 || Dimms == 4) { + DctOdcCtl = 0x00331222; + } + } + + // Adjust Processor ODT + if (Dimms == 1) { + DctOdcCtl |= 0x20000000; // 75ohms + } else { + DctOdcCtl |= 0x10000000; // 150ohms + } + + CurrentChannel->MemClkDisMap = (UINT8 *) DrRDdr2CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DrRDdr2CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DrRDdr2CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri3D; + break; + case 4: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri4D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr2ODTTri2D; + } + + CurrentChannel->DctEccDqsLike = 0x0504; + CurrentChannel->DctEccDqsScale = 0; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr3.c new file mode 100644 index 0000000000..5335b49835 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/mardr3.c @@ -0,0 +1,429 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mardr3.c + * + * Memory Controller, registered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DR_MARDR3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DrRDdr3CLKDis[] = {0x00, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0x00}; + +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DrRDdr3CKETri[] = {0x55, 0xAA}; + +// 2 dimms per channel +// Dimm 0: BP_MEMODTx[2,0] +// Dimm 1: BP_MEMODTx[3,1] +STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8}; +// 4 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[1] +// Dimm 2: BP_MEMODTx[2] +// Dimm 3: BP_MEMODTx[3] +STATIC CONST UINT8 ROMDATA DrRDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0}; + +// BIOS must not tri-state chip select pin corresponding to the second chip +// select of a single rank registered dimm +STATIC CONST UINT8 ROMDATA DrRDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DR DDR3 L1 system + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgRDr3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = { + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR800_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003C3C3C, 0x0000,1}, + {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003C3C3C, 0x0040, 1}, + {DDR1066_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003A3A3A, 0x0040, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00383A38, 0x4040, 2}, + {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x00383A38, 0x4004, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00373937, 0x0000, 1}, + {DDR1600_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x00373937, 0x0040, 1}, + {DDR1600_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x00353935, 0x4004, 2} + }; + + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = { + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4040, 2}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00380038, 0x4004, 3}, + {DDR800_FREQUENCY, QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4004, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003C3C3C, 0x0000, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3C3A, 0x4040, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00373C37, 0x4040, 3}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00373C37, 0x4004, 3}, + {DDR1066_FREQUENCY, QR_DIMM1, \ + 0x003C3C3C, 0x0040, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00383A38, 0x4040, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00343A34, 0x4004, 3}, + {DDR1333_FREQUENCY, QR_DIMM1, \ + 0x003A3A3A, 0x0040, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00383A38, 0x4004, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00393939, 0x0000, 1}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00363936, 0x4040, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00303930, 0x4004, 3}, + {DDR1600_FREQUENCY, QR_DIMM1, \ + 0x00393939, 0x0040, 1}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00363936, 0x4004, 2} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}, + {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = { + {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1}, + {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = { + {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1}, + {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2}, + {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3}, + {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4} + }; + UINT16 i; + UINT16 j; + UINT8 MaxDimmPerCH; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT16 RC2RC8; + BOOLEAN SlowMode; + UINT8 PSCfgSize; + UINT8 PSCfgWlODTSize; + UINT8 PhyWLODT[4]; + CONST ADV_R_PSCFG_ENTRY *PSCfgPtr; + CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr; + UINT8 *DimmsPerChPtr; + + AddrTmgCTL = 0; + DctOdcCtl = 0; + RC2RC8 = 0; + SlowMode = FALSE; + ASSERT (MemData != NULL); + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if (MaxDimmPerCH == 4) { + PSCfgPtr = NULL; + PSCfgSize = NULL; + PSCfgWlODTPtr = PSCfg4DIMMsWlODT; + PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else if (MaxDimmPerCH == 3) { + PSCfgPtr = PSCfg3DIMMs; + PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgWlODTPtr = PSCfg3DIMMsWlODT; + PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else { + PSCfgPtr = PSCfg2DIMMs; + PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgWlODTPtr = PSCfg2DIMMsWlODT; + PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } + + // AddrTmgCTL and DctOdcCtl + if (MaxDimmPerCH != 4) { + for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) { + if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgPtr->Dimms) { + AddrTmgCTL = PSCfgPtr->AddrTmg; + DctOdcCtl = 0x00223222; + RC2RC8 = PSCfgPtr->RC2RC8; + break; + } + } + } + + // + // Overrides and/or exceptions + // + DimmTpMatch = 0; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (MaxDimmPerCH == 4) { + if (DimmTpMatch > 0) { + DctOdcCtl = 0x00223222; + if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) { + DctOdcCtl = 0x00113222; + } + } + if (DimmTpMatch >= 3) { + AddrTmgCTL |= 0x002F0000; + } + if (DimmTpMatch >= 2) { + RC2RC8 = 0x4040; + } + } else { + if ((Dimms == 1) && (DimmTpMatch == 1)) { + DctOdcCtl = 0x00113222; + } + } + + //RC2 and RC8 + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution. + if (CurrentChannel->CtrlWrd02[j] > 0) { + if (CurrentChannel->CtrlWrd02[j] == 1) { + // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F; + } else { + // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F; + } + } + } + + + //WLODT + for (i = 0; i < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) { + if (Dimms != PSCfgWlODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgWlODTPtr->Dimms) { + PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3]; + break; + } + } + + // Set ProcODT + DctOdcCtl |= 0x20000000; + + CurrentChannel->MemClkDisMap = (UINT8 *) DrRDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DrRDdr3CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DrRDdr3CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri3D; + break; + case 4: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri4D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) DrRDdr3ODTTri2D; + } + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/maudr3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/maudr3.c new file mode 100644 index 0000000000..6317e56325 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/DR/maudr3.c @@ -0,0 +1,260 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * maudr3.c + * + * Platform specific settings for DR DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_DR_MAUDR3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA DrUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA DrUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA DrUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA DrUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for DR DDR3 Unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgUDr3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { + {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, + {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, + {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, + {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} + }; + STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent != 0) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + if (Dimms == 1) { + for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { + if (Speed == PSCfg1Dimm[i].Speed) { + if (Loads >= PSCfg1Dimm[i].Loads) { + AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; + DctOdcCtl = PSCfg1Dimm[i].Odc; + } else { + DctOdcCtl = 0x20113222; + } + break; + } + } + ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); + } else { + for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { + if (Speed == PSCfg2Dimm[i].Speed) { + if (Loads <= PSCfg2Dimm[i].Loads) { + AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; + DctOdcCtl = PSCfg2Dimm[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) DrUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) DrUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) DrUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) DrUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/marhy3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/marhy3.c new file mode 100644 index 0000000000..8b87ea99b5 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/marhy3.c @@ -0,0 +1,578 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * marhy3.c + * + * Memory Controller, registered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_HY_MARHY3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA HyRDdr3CLKDis[] = {0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00}; + +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA HyRDdr3CKETri[] = {0x55, 0xAA}; + +// 2 dimms per channel +// Dimm 0: BP_MEMODTx[2,0] +// Dimm 1: BP_MEMODTx[3,1] +STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri2D[] = {0x03, 0x0C, 0x32, 0xC8}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri3D[] = {0x03, 0x0C, 0x30, 0xC8}; +// 4 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[1] +// Dimm 2: BP_MEMODTx[2] +// Dimm 3: BP_MEMODTx[3] +STATIC CONST UINT8 ROMDATA HyRDdr3ODTTri4D[] = {0x03, 0x0C, 0x30, 0xC0}; + +// BIOS must not tri-state chip select pin corresponding to the second chip +// select of a single rank registered dimm +STATIC CONST UINT8 ROMDATA HyRDdr3CSTri[] = {0x01, 0x03, 0x04, 0x0C, 0x10, 0x30, 0x40, 0xC0}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for HY DDR3 L1 system + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to HY MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to HY CS table + * @return CurrentChannel->CKETriMap Points this pointer to HY ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to HY CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgRHy3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + // + // Address Timings and Drive Strengths for 1 DIMM per channel or 2 Dimms per Channel + // + // Code searches table for matching speed, then matches the current dimm + // population and # of dimms to current config and programs the Addr Timing and RC2/RC2 + // + // Frequency, Dimm Config , + // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg2DIMMs[] = { + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR800_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x00000000, 0x4004, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003C3C3C, 0x0000,1}, + {DDR1066_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003C3C3C, 0x0040, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1066_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1066_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x003A3A3A, 0x0040, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00383A38, 0x4040, 2}, + {DDR1333_FREQUENCY, QR_DIMM0 + ANY_DIMM1, \ + 0x00383A38, 0x4004, 2}, + {DDR1333_FREQUENCY, ANY_DIMM0 + QR_DIMM1, \ + 0x00383A38, 0x4004, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x00373937, 0x0000, 1}, + {DDR1600_FREQUENCY, QR_DIMM0 + QR_DIMM1, \ + 0x00373937, 0x0040, 1}, + {DDR1600_FREQUENCY, ANY_DIMM0 + ANY_DIMM1, \ + 0x00353935, 0x4004, 2} + }; + // + // Address Timings and Drive Strengths for 3 DIMMs per channel + // + // Code searches table for matching speed, then matches the current dimm + // population and # of dimms to current config and programs the Addr Timing and RC2/RC2 + // + // Frequency, Dimm Config , + // Address Timing Value(F2x[1, 0]9C_x04), RC2/RC8 Value, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_ENTRY PSCfg3DIMMs[] = { + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x0000, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4040, 2}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00380038, 0x4004, 3}, + {DDR800_FREQUENCY, QR_DIMM1, \ + 0x00000000, 0x0040, 1}, + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x4004, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003C3C3C, 0x0000, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3C3A, 0x4040, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00373C37, 0x4040, 3}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00373C37, 0x4004, 3}, + {DDR1066_FREQUENCY, QR_DIMM1, \ + 0x003C3C3C, 0x0040, 1}, + {DDR1066_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3C3A, 0x4004, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x003A3A3A, 0x0000, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00383A38, 0x4040, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00343A34, 0x4004, 3}, + {DDR1333_FREQUENCY, QR_DIMM1, \ + 0x003A3A3A, 0x0040, 1}, + {DDR1333_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00383A38, 0x4004, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00393939, 0x0000, 1}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00363936, 0x4040, 2}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + ANY_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00303930, 0x4004, 3}, + {DDR1600_FREQUENCY, QR_DIMM1, \ + 0x00393939, 0x0040, 1}, + {DDR1600_FREQUENCY, SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x00363936, 0x4004, 2} + }; + // + // DIMM ODT Pattern (1 or 2 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = { + {SR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1}, + {QR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000505, 0x00000505, 1}, + {SR_DIMM1, \ + 0x00000000, 0x00000000, 0x00020000, 0x00000000, 1}, + {DR_DIMM1, \ + 0x00000000, 0x00000000, 0x02080000, 0x00000000, 1}, + {QR_DIMM1, \ + 0x00000000, 0x00000000, 0x0A0A0000, 0x0A0A0000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x01010202, 0x00000000, 0x09030603, 0x00000000, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \ + 0x01010A0A, 0x01010000, 0x01030E0B, 0x01090000, 2}, + {QR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x05050202, 0x00000202, 0x0D070203, 0x00000206, 2}, + {QR_DIMM0 + QR_DIMM1, \ + 0x05050A0A, 0x05050A0A, 0x05070A0B, 0x050D0A0E, 2} + }; + // DIMM ODT Pattern (3 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = { + {SR_DIMM2 + DR_DIMM2, \ + 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1}, + {SR_DIMM0 + DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, \ + 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3}, + {QR_DIMM1, \ + 0x00000000, 0x00000000, 0x080A0000, 0x020A0000, 1}, + {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x04040000, 0x04040A0A, 0x04060000, 0x040C0A0E, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, \ + 0x01010A0A, 0x01010000, 0x01030A0B, 0x01090000, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, \ + 0x05050E0E, 0x05050B0B, 0x05070E0F, 0x050D0B0F, 3} + }; + // + // DIMM ODT Pattern (4 DIMMs per channel) + // + // Dimm Config , + // Fn2_9C 180, Fn2_9C 181, Fn2_9C 182, Fn2_9C 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg4DIMMsODT[] = { + {ANY_DIMM3, \ + 0x00000000, 0x00000000, 0x00000000, 0x08080000, 1}, + {ANY_DIMM2 + ANY_DIMM3, \ + 0x00000000, 0x04040808, 0x00000000, 0x0C0C0C0C, 2}, + {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \ + 0x0C0C0000, 0x06060A0A, 0x0E0E0000, 0x0E0E0E0E, 3}, + {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, \ + 0x0D0D0E0E, 0x07070B0B, 0x0F0F0F0F, 0x0F0F0F0F, 4} + }; + // + // DIMM Write Leveling ODT Pattern for 1 or 2 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {QR_DIMM0, {0x05, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2}, + {SR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {QR_DIMM0 + SR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + DR_DIMM1, {0x03, 0x07, 0x06, 0x00}, 2}, + {QR_DIMM0 + QR_DIMM1, {0x0B, 0x07, 0x0E, 0x0D}, 2} + }; + // + // DIMM Write Leveling ODT Pattern 3 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = { + {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3}, + {QR_DIMM1, {0x00, 0x0A, 0x00, 0x0A}, 1}, + {QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x00, 0x06, 0x0E, 0x0C}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1, {0x0B, 0x03, 0x00, 0x09}, 2}, + {SR_DIMM0 + DR_DIMM0 + QR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x0F, 0x07, 0x0F, 0x0D}, 3} + }; + // + // DIMM Write Leveling ODT Pattern 4 Dimms Per Channel + // + // Dimm Config, WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm, # Dimms to match + // + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg4DIMMsWlODT[] = { + {ANY_DIMM3, {0x00, 0x00, 0x00, 0x08}, 1}, + {ANY_DIMM2 + ANY_DIMM3, {0x00, 0x00, 0x0C, 0x0C}, 2}, + {ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x00, 0x0E, 0x0E, 0x0E}, 3}, + {ANY_DIMM0 + ANY_DIMM1 + ANY_DIMM2 + ANY_DIMM3, {0x0F, 0x0F, 0x0F, 0x0F}, 4} + }; + + UINT16 i; + UINT16 j; + UINT8 MaxDimmPerCH; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT16 RC2RC8; + UINT32 PhyRODTCSLow; + UINT32 PhyRODTCSHigh; + UINT32 PhyWODTCSLow; + UINT32 PhyWODTCSHigh; + BOOLEAN SlowMode; + UINT8 PSCfgSize; + UINT8 PSCfgODTSize; + UINT8 PSCfgWlODTSize; + UINT8 PhyWLODT[4]; + + CONST ADV_R_PSCFG_ENTRY *PSCfgPtr; + CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr; + CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != NULL); + ASSERT (CurrentChannel != NULL); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + RC2RC8 = 0; + PhyRODTCSLow = 0; + PhyRODTCSHigh = 0; + PhyWODTCSLow = 0; + PhyWODTCSHigh = 0; + SlowMode = FALSE; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent == 0) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if (MaxDimmPerCH == 4) { + PSCfgPtr = NULL; + PSCfgSize = NULL; + PSCfgODTPtr = PSCfg4DIMMsODT; + PSCfgWlODTPtr = PSCfg4DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg4DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg4DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else if (MaxDimmPerCH == 3) { + PSCfgPtr = PSCfg3DIMMs; + PSCfgSize = sizeof (PSCfg3DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgODTPtr = PSCfg3DIMMsODT; + PSCfgWlODTPtr = PSCfg3DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else { + PSCfgPtr = PSCfg2DIMMs; + PSCfgSize = sizeof (PSCfg2DIMMs) / sizeof (ADV_R_PSCFG_ENTRY); + PSCfgODTPtr = PSCfg2DIMMsODT; + PSCfgWlODTPtr = PSCfg2DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } + + // AddrTmgCTL and DctOdcCtl + if (MaxDimmPerCH != 4) { + for (i = 0; i < PSCfgSize; i++, PSCfgPtr++) { + if ((Speed != PSCfgPtr->Speed) || (Dimms != PSCfgPtr->Dimms)) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgPtr->Dimms) { + AddrTmgCTL = PSCfgPtr->AddrTmg; + DctOdcCtl = 0x00223222; + RC2RC8 = PSCfgPtr->RC2RC8; + break; + } + } + } + + // + // Overrides and/or exceptions + // + DimmTpMatch = 0; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((DIMMRankType & (UINT16) 0x03 << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (MaxDimmPerCH == 4) { + if (DimmTpMatch > 0) { + DctOdcCtl = 0x00223222; + if ((Speed == DDR800_FREQUENCY) && (DimmTpMatch == 1)) { + DctOdcCtl = 0x00113222; + } + } + if (DimmTpMatch >= 3) { + AddrTmgCTL |= 0x002F0000; + } + if (DimmTpMatch >= 2) { + RC2RC8 = 0x4040; + } + } else if ((MaxDimmPerCH == 3) && (CurrentChannel->Dimms == 3)) { + DctOdcCtl = 0x00113222; + } else { + if ((Dimms == 1) && (DimmTpMatch == 1)) { + DctOdcCtl = 0x00113222; + } + } + + //RC2 and RC8 + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + // CtrlWrd02(s) will contain the info. of SPD byte 63 after MemTDIMMPresence3 execution. + if (CurrentChannel->CtrlWrd02[j] > 0) { + if (CurrentChannel->CtrlWrd02[j] == 1) { + // Store real RC2 and RC8 value (High byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 12) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) (RC2RC8 >> 8) & 0x000F; + } else { + // Store real RC2 and RC8 value (low byte) into CtrlWrd02(s) and CtrlWrd08(s). + CurrentChannel->CtrlWrd02[j] = (UINT8) (RC2RC8 >> 4) & 0x000F; + CurrentChannel->CtrlWrd08[j] = (UINT8) RC2RC8 & 0x000F; + } + } + } + + //Programmable ODT + for (i = 0; i < PSCfgODTSize; i++, PSCfgODTPtr++) { + if (Dimms != PSCfgODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgODTPtr->Dimms) { + PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow; + PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh; + PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow; + PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh; + break; + } + } + + //WLODT + for (i = 0; i < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) { + if (Dimms != PSCfgWlODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgWlODTPtr->Dimms) { + PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3]; + break; + } + } + + // Set ProcODT + DctOdcCtl |= 0x20000000; + + CurrentChannel->MemClkDisMap = (UINT8 *) HyRDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) HyRDdr3CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) HyRDdr3CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri3D; + break; + case 4: + CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri4D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) HyRDdr3ODTTri2D; // Most conservative + } + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCSLow; + CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh; + CurrentChannel->PhyWODTCSLow = PhyWODTCSLow; + CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/mauhy3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/mauhy3.c new file mode 100644 index 0000000000..fc5f3c6bba --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/HY/mauhy3.c @@ -0,0 +1,357 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mauhy3.c + * + * Platform specific settings for HY DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_HY_MAUHY3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA HyUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA HyUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA HyUDdr3ODTTri2D[] = {0x01, 0x04, 0x02, 0x08}; +// 3 dimms per channel +// Dimm 0: BP_MEMODTx[0] +// Dimm 1: BP_MEMODTx[3,1] +// Dimm 2: BP_MEMODTx[2] +STATIC CONST UINT8 ROMDATA HyUDdr3ODTTri3D[] = {0xFF, 0xFF, 0xFF, 0xFF}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA HyUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for HY DDR3 unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to HY MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to HY CS table + * @return CurrentChannel->CKETriMap Points this pointer to HY ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to HY CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgUHy3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg2DIMMsODT[] = { + {SR_DIMM0, 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, 0x00000000, 0x00000000, 0x00000104, 0x00000000, 1}, + {SR_DIMM1, 0x00000000,0x00000000,0x00020000, 0x00000000, 1}, + {DR_DIMM1, 0x00000000,0x00000000,0x02080000, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 0x01010202,0x00000000,0x09030603, 0x00000000, 2}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg2DIMMsWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfg3DIMMsODT[] = { + {SR_DIMM2 + DR_DIMM2, 0x00000000, 0x00000000, 0x00000000, 0x00000404, 1}, + //{SR_DIMM0 + DR_DIMM0, 0x00000000, 0x00000000, 0x00000101, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, 0x00000404, 0x00000101, 0x00000405, 0x00000105, 2}, + //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, 0x05050606, 0x00000303, 0x0D070607, 0x00000307, 3}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfg3DIMMsWlODT[] = { + {SR_DIMM2 + DR_DIMM2, {0x00, 0x00, 0x04, 0x00}, 1}, + //{SR_DIMM0 + DR_DIMM0, {0x01, 0x02, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM2 + DR_DIMM2, {0x05, 0x00, 0x05, 0x00}, 2}, + //{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1 + SR_DIMM2 + DR_DIMM2, {0x07, 0x07, 0x07, 0x00}, 3}, + }; + + UINT16 i; + UINT16 j; + UINT8 MaxDimmPerCH; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT32 PhyRODTCSLow; + UINT32 PhyRODTCSHigh; + UINT32 PhyWODTCSLow; + UINT32 PhyWODTCSHigh; + UINT8 PhyWLODT[4]; + UINT8 PSCfgODTSize; + UINT8 PSCfgWlODTSize; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + CONST ADV_PSCFG_ODT_ENTRY *PSCfgODTPtr; + CONST ADV_R_PSCFG_WL_ODT_ENTRY *PSCfgWlODTPtr; + UINT8 *DimmsPerChPtr; + + ASSERT (MemData != NULL); + ASSERT (CurrentChannel != NULL); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyRODTCSLow = 0; + PhyRODTCSHigh = 0; + PhyWODTCSLow = 0; + PhyWODTCSHigh = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_HY) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->RegDimmPresent) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + ASSERT (i < GET_SIZE_OF (PSCfg)); + + if (MaxDimmPerCH == 3) { + PSCfgODTPtr = PSCfg3DIMMsODT; + PSCfgWlODTPtr = PSCfg3DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg3DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg3DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } else { + PSCfgODTPtr = PSCfg2DIMMsODT; + PSCfgWlODTPtr = PSCfg2DIMMsWlODT; + PSCfgODTSize = sizeof (PSCfg2DIMMsODT) / sizeof (ADV_PSCFG_ODT_ENTRY); + PSCfgWlODTSize = sizeof (PSCfg2DIMMsWlODT) / sizeof (ADV_R_PSCFG_WL_ODT_ENTRY); + } + + // Programmable ODT + for (i = 0; i < PSCfgODTSize; i++, PSCfgODTPtr++) { + if (Dimms != PSCfgODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgODTPtr->Dimms) { + PhyRODTCSLow = PSCfgODTPtr->PhyRODTCSLow; + PhyRODTCSHigh = PSCfgODTPtr->PhyRODTCSHigh; + PhyWODTCSLow = PSCfgODTPtr->PhyWODTCSLow; + PhyWODTCSHigh = PSCfgODTPtr->PhyWODTCSHigh; + break; + } + } + + // WL ODT + for (i = 0; i < PSCfgWlODTSize; i++, PSCfgWlODTPtr++) { + if (Dimms != PSCfgWlODTPtr->Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgWlODTPtr->DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgWlODTPtr->Dimms) { + PhyWLODT[0] = PSCfgWlODTPtr->PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgWlODTPtr->PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgWlODTPtr->PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgWlODTPtr->PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (Dimms == 1) { + if (Loads >= 16) { + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x003B0000; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00380000; + } else if (Speed == DDR1333_FREQUENCY) { + AddrTmgCTL = 0x00360000; + } else { + AddrTmgCTL = 0x00340000; + SlowMode = TRUE; + } + } else { + AddrTmgCTL = 0; + } + DctOdcCtl = 0x20113222; + } + + CurrentChannel->MemClkDisMap = (UINT8 *) HyUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) HyUDdr3CKETri; + CurrentChannel->ChipSelTriMap = (UINT8 *) HyUDdr3CSTri; + + switch (MaxDimmPerCH) { + case 3: + CurrentChannel->ODTTriMap = (UINT8 *) HyUDdr3ODTTri3D; + break; + default: + CurrentChannel->ODTTriMap = (UINT8 *) HyUDdr3ODTTri2D; // Most conservative + } + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCSLow; + CurrentChannel->PhyRODTCSHigh = PhyRODTCSHigh; + CurrentChannel->PhyWODTCSLow = PhyWODTCSLow; + CurrentChannel->PhyWODTCSHigh = PhyWODTCSHigh; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/masNi3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/masNi3.c new file mode 100644 index 0000000000..1c27fc9d8e --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/masNi3.c @@ -0,0 +1,261 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * masNi3.c + * + * Platform specific settings for Ni DDR3 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support ASB2 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_NI_MASNI3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA NiSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA NiSDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA NiSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA NiSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for Ni DDR3 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSNi3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222}, + {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222}, + {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 MaxDimmPerCH; + UINT8 *DimmsPerChPtr; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + SlowMode = FALSE; // 1T + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (MaxDimmPerCH == 2) { + if (Dimms == 2) { + DctOdcCtl = 0x20223323; + SlowMode = TRUE; + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x00000039; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00000037; + } + } else { + DctOdcCtl = 0x20113222; + } + } else { + if (CurrentChannel->DimmSRPresent != 0) { + PhyWLODT[0] = 1; + } else if (CurrentChannel->DimmDrPresent != 0) { + PhyWLODT[0] = 4; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) NiSDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) NiSDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) NiSDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) NiSDdr3CSTri; + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/mauNi3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/mauNi3.c new file mode 100644 index 0000000000..2d0e1e0a10 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/NI/mauNi3.c @@ -0,0 +1,260 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * mauNi3.c + * + * Platform specific settings for Ni DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_NI_MAUNI3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA NiUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA NiUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA NiUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA NiUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for Ni DDR3 Unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgUNi3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { + {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, + {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, + {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, + {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} + }; + STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + if (Dimms == 1) { + for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { + if (Speed == PSCfg1Dimm[i].Speed) { + if (Loads >= PSCfg1Dimm[i].Loads) { + AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; + DctOdcCtl = PSCfg1Dimm[i].Odc; + } else { + DctOdcCtl = 0x20113222; + } + break; + } + } + ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); + } else { + for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { + if (Speed == PSCfg2Dimm[i].Speed) { + if (Loads <= PSCfg2Dimm[i].Loads) { + AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; + DctOdcCtl = PSCfg2Dimm[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) NiUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) NiUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) NiUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) NiUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mason3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mason3.c new file mode 100644 index 0000000000..c02c006e3b --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mason3.c @@ -0,0 +1,274 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * mason3.c + * + * Platform specific settings for ON DDR3 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/ON) + * @e \$Revision: 38442 $ @e \$Date: 2010-09-24 06:39:57 +0800 (Fri, 24 Sep 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +#define FILECODE PROC_MEM_ARDK_ON_MASON3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA OnSDdr3CLKDis[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; +STATIC CONST UINT8 ROMDATA OnSDdr3CKETri[] = {0xFF, 0xFF}; +STATIC CONST UINT8 ROMDATA OnSDdr3ODTTri[] = {0x01, 0x02, 0x04, 0x08}; +STATIC CONST UINT8 ROMDATA OnSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for ON DDR3 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to LN MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to LN CS table + * @return CurrentChannel->CKETriMap Points this pointer to LN ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to LN CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSON3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + CONST ADV_PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, 0x00000000, 0x00002223, 1}, + {DDR800_FREQUENCY, ANY_, 0x00000039, 0x20222323, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x003D3D3D, 0x10002223, 1}, + {DDR1066_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00000000, 0x10002223, 1}, + {DDR1066_FREQUENCY, ANY_, 0x00000037, 0x30222323, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x003D3D3D, 0x30002223, 1}, + {DDR1333_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00003D3D, 0x30002223, 1}, + {DDR1333_FREQUENCY, ANY_, 0x00000035, 0x30222323, 2} + }; + + // + // DIMM ODT Pattern + // + // Dimm Config , + // Fn2_F4 180, Fn2_F4 181, Fn2_F4 182, Fn2_F4 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfgDIMMsODT[] = { + {SR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000201, 0x00000000, 1}, + {SR_DIMM1, \ + 0x00000000, 0x00000000, 0x00040000, 0x00000000, 1}, + {DR_DIMM1, \ + 0x00000000, 0x00000000, 0x08040000, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x01010404, 0x00000000, 0x09050605, 0x00000000, 2} + }; + + UINT8 i; + UINT8 j; + UINT8 Loads; + UINT8 Dimms; + UINT8 DimmTpMatch; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + UINT32 PhyRODTCS; + UINT32 PhyWODTCS; + BOOLEAN SlowMode; + UINT8 *DimmsPerChPtr; + UINT8 DimmsPerCH; + + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + PhyRODTCS = 0; + PhyWODTCS = 0; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_ON) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + DimmsPerCH = *DimmsPerChPtr; + } else { + DimmsPerCH = 2; + } + + if (Dimms == 2) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if ((PSCfg[i].Dimms == ANY_) || (PSCfg[i].Dimms == Dimms)) { + if ((PSCfg[i].Speed == ANY_) || (PSCfg[i].Speed == Speed)) { + if ((PSCfg[i].Loads == ANY_) || ((PSCfg[i].Loads & DIMMRankType) != 0)) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg)); + + // + // Programmable Dimm ODT + // + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMsODT); i++) { + if (Dimms != PSCfgDIMMsODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMsODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMsODT[i].Dimms) { + PhyRODTCS = PSCfgDIMMsODT[i].PhyRODTCSLow; + PhyWODTCS = PSCfgDIMMsODT[i].PhyWODTCSLow; + break; + } + } + + // + //WL ODT + // + PhyWLODT[0] = (UINT8) (PhyWODTCS & 0x0F); + PhyWLODT[1] = (UINT8) ((PhyWODTCS >> 16) & 0x0F); + PhyWLODT[2] = PhyWLODT[3] = 0; + + // + // Overrides and/or exceptions + // + + CurrentChannel->MemClkDisMap = (UINT8 *) OnSDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) OnSDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) OnSDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) OnSDdr3CSTri; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCS; + CurrentChannel->PhyWODTCSLow = PhyWODTCS; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + if ((DimmsPerCH == 2) && (Speed == DDR1333_FREQUENCY) && (Dimms == 1)) { + // Set Dqs and DQ drive strength to 1.0x for 1 dimm on 2 dimms per channel DDR3-1333 + CurrentChannel->DctOdcCtl |= 0x110000; + } + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mauon3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mauon3.c new file mode 100644 index 0000000000..075aae17be --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ON/mauon3.c @@ -0,0 +1,259 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * mauon3.c + * + * Platform specific settings for ON DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/ON) + * @e \$Revision: 38442 $ @e \$Date: 2010-09-24 06:39:57 +0800 (Fri, 24 Sep 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "PlatformMemoryConfiguration.h" +#include "mport.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +#define FILECODE PROC_MEM_ARDK_ON_MAUON3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA OnUDdr3CLKDis[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; +STATIC CONST UINT8 ROMDATA OnUDdr3CKETri[] = {0xFF, 0xFF}; +STATIC CONST UINT8 ROMDATA OnUDdr3ODTTri[] = {0x01, 0x02, 0x04, 0x08}; +STATIC CONST UINT8 ROMDATA OnUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for ON DDR3 Unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to LN MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to LN CS table + * @return CurrentChannel->CKETriMap Points this pointer to LN ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to LN CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgUON3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + CONST ADV_PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x00112223, 1}, + {DDR800_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x003B0000, 0x00112223, 1}, + {DDR800_FREQUENCY, ANY_, 0x00390039, 0x20222323, 2}, + {DDR1066_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x10112223, 1}, + {DDR1066_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00380000, 0x10112223, 1}, + {DDR1066_FREQUENCY, ANY_, 0x00350037, 0x30222323, 2}, + {DDR1333_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x30112223, 1}, + {DDR1333_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00360000, 0x30112223, 1}, + {DDR1333_FREQUENCY, ANY_, 0x00000035, 0x30222323, 2} + }; + + // + // DIMM ODT Pattern + // + // Dimm Config , + // Fn2_F4 180, Fn2_F4 181, Fn2_F4 182, Fn2_F4 183, # Dimms to match + // + STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfgDIMMsODT[] = { + {SR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000001, 0x00000000, 1}, + {DR_DIMM0, \ + 0x00000000, 0x00000000, 0x00000201, 0x00000000, 1}, + {SR_DIMM1, \ + 0x00000000, 0x00000000, 0x00040000, 0x00000000, 1}, + {DR_DIMM1, \ + 0x00000000, 0x00000000, 0x08040000, 0x00000000, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \ + 0x01010404, 0x00000000, 0x09050605, 0x00000000, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + UINT32 PhyRODTCS; + UINT32 PhyWODTCS; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + PhyRODTCS = 0; + PhyWODTCS = 0; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_ON) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { + return AGESA_UNSUPPORTED; + } + + // Prepare inputs + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if ((PSCfg[i].Dimms == ANY_) || (PSCfg[i].Dimms == Dimms)) { + if ((PSCfg[i].Speed == ANY_) || (PSCfg[i].Speed == Speed)) { + if ((PSCfg[i].Loads == ANY_) || ((PSCfg[i].Loads & DIMMRankType) != 0)) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + } + + ASSERT (i < GET_SIZE_OF (PSCfg)); + + // + // Programmable Dimm ODT + // + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMsODT); i++) { + if (Dimms != PSCfgDIMMsODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMsODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMsODT[i].Dimms) { + PhyRODTCS = PSCfgDIMMsODT[i].PhyRODTCSLow; + PhyWODTCS = PSCfgDIMMsODT[i].PhyWODTCSLow; + break; + } + } + + // + //WL ODT + // + PhyWLODT[0] = (UINT8) (PhyWODTCS & 0x0F); + PhyWLODT[1] = (UINT8) ((PhyWODTCS >> 16) & 0x0F); + PhyWLODT[2] = PhyWLODT[3] = 0; + + // + // Overrides and/or exceptions + // + CurrentChannel->MemClkDisMap = (UINT8 *) OnUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) OnUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) OnUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) OnUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + CurrentChannel->PhyRODTCSLow = PhyRODTCS; + CurrentChannel->PhyWODTCSLow = PhyWODTCS; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/masph3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/masph3.c new file mode 100644 index 0000000000..9da1e94fda --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/masph3.c @@ -0,0 +1,261 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * masph3.c + * + * Platform specific settings for PH DDR3 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/PH) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support S1g4 */ + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_PH_MASPH3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA PhSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA PhSDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA PhSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA PhSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for PH DDR3 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSPh3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222}, + {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222}, + {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 MaxDimmPerCH; + UINT8 *DimmsPerChPtr; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + SlowMode = FALSE; // 1T + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (MaxDimmPerCH == 2) { + if (Dimms == 2) { + DctOdcCtl = 0x20223323; + SlowMode = TRUE; + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x00000039; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00000037; + } + } else { + DctOdcCtl = 0x20113222; + } + } else { + if (CurrentChannel->DimmSRPresent != 0) { + PhyWLODT[0] = 1; + } else if (CurrentChannel->DimmDrPresent != 0) { + PhyWLODT[0] = 4; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) PhSDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) PhSDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) PhSDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) PhSDdr3CSTri; + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/mauPh3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/mauPh3.c new file mode 100644 index 0000000000..68954edd9b --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/PH/mauPh3.c @@ -0,0 +1,260 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mauph3.c + * + * Platform specific settings for PH DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/PH) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* This file contains routine that add platform specific support AM3 */ + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_PH_MAUPH3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA PhUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA PhUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA PhUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA PhUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for PH DDR3 unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to PH MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to PH CS table + * @return CurrentChannel->CKETriMap Points this pointer to PH ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to PH CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgUPh3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { + {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, + {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, + {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, + {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} + }; + STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + if (Dimms == 1) { + for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { + if (Speed == PSCfg1Dimm[i].Speed) { + if (Loads >= PSCfg1Dimm[i].Loads) { + AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; + DctOdcCtl = PSCfg1Dimm[i].Odc; + } else { + DctOdcCtl = 0x20113222; + } + break; + } + } + ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); + } else { + for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { + if (Speed == PSCfg2Dimm[i].Speed) { + if (Loads <= PSCfg2Dimm[i].Loads) { + AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; + DctOdcCtl = PSCfg2Dimm[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) PhUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) PhUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) PhUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) PhUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/masRb3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/masRb3.c new file mode 100644 index 0000000000..363c52b1d8 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/masRb3.c @@ -0,0 +1,260 @@ +/* $NoKeywords:$ */ +/* + * @file + * + * masRb3.c + * + * Platform specific settings for RB DDR3 SO-dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/RB) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + +#include "AGESA.h" +#include "mport.h" +#include "ma.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "mu.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_RB_MASRB3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA RbSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA RbSDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA RbSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA RbSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for RB DDR3 SO-dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + * + */ + +AGESA_STATUS +MemAGetPsCfgSRb3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg[] = { + {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222}, + {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222}, + {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222}, + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 MaxDimmPerCH; + UINT8 *DimmsPerChPtr; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + SlowMode = FALSE; // 1T + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); + if (DimmsPerChPtr != NULL) { + MaxDimmPerCH = *DimmsPerChPtr; + } else { + MaxDimmPerCH = 2; + } + + for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { + if (Speed == PSCfg[i].Speed) { + if (Loads <= PSCfg[i].Loads) { + AddrTmgCTL = PSCfg[i].AddrTmg; + DctOdcCtl = PSCfg[i].Odc; + break; + } + } + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + // + // Overrides and/or exceptions + // + if (MaxDimmPerCH == 2) { + if (Dimms == 2) { + DctOdcCtl = 0x20223323; + SlowMode = TRUE; + if (Speed == DDR800_FREQUENCY) { + AddrTmgCTL = 0x00000039; + } else if (Speed == DDR1066_FREQUENCY) { + AddrTmgCTL = 0x00000037; + } + } else { + DctOdcCtl = 0x20113222; + } + } else { + if (CurrentChannel->DimmSRPresent != 0) { + PhyWLODT[0] = 1; + } else if (CurrentChannel->DimmDrPresent != 0) { + PhyWLODT[0] = 4; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) RbSDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) RbSDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) RbSDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) RbSDdr3CSTri; + + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/mauRb3.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/mauRb3.c new file mode 100644 index 0000000000..fab96313a2 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/RB/mauRb3.c @@ -0,0 +1,259 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mauRb3.c + * + * Platform specific settings for RB DDR3 unbuffered dimms + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk/RB) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + +#include "AGESA.h" +#include "mport.h" +#include "PlatformMemoryConfiguration.h" +#include "ma.h" +#include "Ids.h" +#include "cpuFamRegisters.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_RB_MAURB3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +STATIC CONST UINT8 ROMDATA RbUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +// Even chip select maps to M[B,A]_CKE[0] +// Odd chip select maps to M[B,A]_CKE[1] +STATIC CONST UINT8 ROMDATA RbUDdr3CKETri[] = {0x55, 0xAA}; +// Bit 0: M[B,A]0_ODT[0] +// Bit 1: M[B,A]1_ODT[0] +// Bit 2: M[B,A]0_ODT[1] +// Bit 3: M[B,A]1_ODT[1] +STATIC CONST UINT8 ROMDATA RbUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; +// Bit 0: M[B,A]0_CS_H/L[0] +// Bit 1: M[B,A]0_CS_H/L[1] +// Bit 2: M[B,A]0_CS_H/L[2] +// Bit 3: M[B,A]0_CS_H/L[3] +STATIC CONST UINT8 ROMDATA RbUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is function sets the platform specific settings for RB DDR3 Unbuffered dimms + * + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_SUCCESS + * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table + * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table + * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table + * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table + * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC + * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte + * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel + * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel + * @return CurrentChannel->SlowMode Slow Mode + * + */ + +AGESA_STATUS +MemAGetPsCfgURb3 ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { + {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, + {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, + {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, + {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} + }; + STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { + {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, + {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, + {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, + {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} + }; + + STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { + {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, + {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, + {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, + {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, + {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} + }; + + UINT16 i; + UINT16 j; + UINT8 Loads; + UINT8 Dimms; + UINT16 Speed; + UINT16 DIMMRankType; + UINT16 _DIMMRankType; + UINT32 AddrTmgCTL; + UINT32 DctOdcCtl; + UINT8 PhyWLODT[4]; + BOOLEAN SlowMode; + UINT8 DimmTpMatch; + + ASSERT (MemData != 0); + ASSERT (CurrentChannel != 0); + + AddrTmgCTL = 0; + DctOdcCtl = 0; + PhyWLODT[0] = 0x0F; + PhyWLODT[1] = 0x0F; + PhyWLODT[2] = 0x0F; + PhyWLODT[3] = 0x0F; + + if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_RB) == 0) { + return AGESA_UNSUPPORTED; + } + if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { + return AGESA_UNSUPPORTED; + } + if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { + return AGESA_UNSUPPORTED; + } + // Prepare inputs + Loads = CurrentChannel->Loads; + Dimms = CurrentChannel->Dimms; + Speed = CurrentChannel->DCTPtr->Timings.Speed; + DIMMRankType = MemAGetPsRankType (CurrentChannel); + + if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { + SlowMode = TRUE; // 2T + } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { + SlowMode = TRUE; // 2T + } else { + SlowMode = FALSE; // 1T + } + + if (Dimms == 1) { + for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { + if (Speed == PSCfg1Dimm[i].Speed) { + if (Loads >= PSCfg1Dimm[i].Loads) { + AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; + DctOdcCtl = PSCfg1Dimm[i].Odc; + } else { + DctOdcCtl = 0x20113222; + } + break; + } + } + ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); + } else { + for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { + if (Speed == PSCfg2Dimm[i].Speed) { + if (Loads <= PSCfg2Dimm[i].Loads) { + AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; + DctOdcCtl = PSCfg2Dimm[i].Odc; + break; + } + } + } + ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); + } + + // WL ODT + for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { + if (Dimms != PSCfgDIMMWlODT[i].Dimms) { + continue; + } + DimmTpMatch = 0; + _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; + for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { + if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { + DimmTpMatch++; + } + } + if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { + PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; + PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; + PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; + PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; + break; + } + } + + CurrentChannel->MemClkDisMap = (UINT8 *) RbUDdr3CLKDis; + CurrentChannel->CKETriMap = (UINT8 *) RbUDdr3CKETri; + CurrentChannel->ODTTriMap = (UINT8 *) RbUDdr3ODTTri; + CurrentChannel->ChipSelTriMap = (UINT8 *) RbUDdr3CSTri; + + CurrentChannel->DctEccDqsLike = 0x0403; + CurrentChannel->DctEccDqsScale = 0x70; + CurrentChannel->DctAddrTmg = AddrTmgCTL; + CurrentChannel->DctOdcCtl = DctOdcCtl; + for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { + CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; + } + CurrentChannel->SlowMode = SlowMode; + + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ma.c b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ma.c new file mode 100644 index 0000000000..b59bef8b1b --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Mem/Ardk/ma.c @@ -0,0 +1,141 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * ma.c + * + * Initializes ARDK Block + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Ardk) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + +#include "AGESA.h" +#include "ma.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_ARDK_MA_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * This is the default return function of the ARDK block. The function always + * returns AGESA_UNSUPPORTED + * + * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE + * @param[in] SocketID Socket number + * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return AGESA_UNSUPPORTED AGESA status indicating that default is unsupported + * + */ + +AGESA_STATUS +MemAGetPsCfgDef ( + IN OUT MEM_DATA_STRUCT *MemData, + IN UINT8 SocketID, + IN OUT CH_DEF_STRUCT *CurrentChannel + ) +{ + return AGESA_UNSUPPORTED; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function returns the rank type map of a channel. + * + * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT + * + * @return UINT16 - The map of rank type. + * + */ +UINT16 +MemAGetPsRankType ( + IN CH_DEF_STRUCT *CurrentChannel + ) +{ + UINT8 i; + UINT16 DIMMRankType; + + DIMMRankType = 0; + for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) { + if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) { + if (i < 2) { + DIMMRankType |= (UINT16) 4 << (i << 2); + } + } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) { + DIMMRankType |= (UINT16) 2 << (i << 2); + } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) { + DIMMRankType |= (UINT16) 1 << (i << 2); + } + } + return DIMMRankType; +} |