diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY')
5 files changed, 1120 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrndcthy.c b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrndcthy.c new file mode 100644 index 0000000000..c908382bd6 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrndcthy.c @@ -0,0 +1,76 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mrndctHy.c + * + * Northbridge DCT support for Hydra Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "OptionMemory.h" +#include "PlatformMemoryConfiguration.h" +#include "Ids.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mru.h" +#include "mrnhy.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNDCTHY_FILECODE + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.c b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.c new file mode 100644 index 0000000000..453308ade8 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.c @@ -0,0 +1,710 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mrnhy.c + * + * Common Northbridge functions for Hydra Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mrport.h" +#include "cpuFamRegisters.h" +#include "cpuRegisters.h" +#include "cpuFamilyTranslation.h" +#include "mm.h" +#include "mn.h" +#include "mrnhy.h" +#include "heapManager.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) +#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNHY_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define MAX_DIES_PER_SOCKET 2 +#define MAX_DCTS_PER_DIE 2 +#define SPLIT_CHANNEL 0x20000000 +#define CHANNEL_SELECT 0x10000000 +#define MAX_DELAYS 9 /* 8 data bytes + 1 ECC byte */ +#define MAX_DIMMS 4 /* 4 DIMMs per channel */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +VOID +STATIC +MemRecNInitNBRegTableHy ( + IN OUT TSEFO *NBRegTable + ); + +UINT32 +STATIC +MemRecNCmnGetSetFieldHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 IsSet, + IN BIT_FIELD_NAME FieldName, + IN UINT32 Field + ); + +UINT32 +STATIC +MemRecNcmnGetSetTrainDlyHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 IsSet, + IN TRN_DLY_TYPE TrnDly, + IN DRBN DrbnVar, + IN UINT16 Field + ); + +BOOLEAN +STATIC +MemRecNIsIdSupportedHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN CPU_LOGICAL_ID *LogicalIdPtr + ); + +VOID +STATIC +MemRecNSwitchNodeHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID + ); + + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/* -----------------------------------------------------------------------------*/ +/** + * + * This function initializes the northbridge block + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT + * @param[in] NodeID - Node ID for this NB block + * + * @return TRUE - This node is a Hydra and this NB block has been initialized + * @return FALSE - This node is not a Hydra + */ + +BOOLEAN +MemRecConstructNBBlockHY ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ) +{ + UINT8 i; + UINT8 Dct; + UINT8 Channel; + DIE_STRUCT *MCTPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + // + // Determine if this is the expected NB Type + // + GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); + if (!MemRecNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) { + return FALSE; + } + + // + // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs + // + MCTPtr = &MemPtr->DiesPerSystem[NodeID]; + AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_HY * ( + sizeof (DCT_STRUCT) + ( + MAX_CHANNELS_PER_DCT_HY * ( + sizeof (CH_DEF_STRUCT) + ( + MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES + ) + ) + ) + ); + AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0); + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) { + return FALSE; + } + + MemPtr->DieCount = MAX_DIES_PER_SOCKET; + MCTPtr->DctCount = MAX_DCTS_PER_NODE_HY; + MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; + MemPtr->DiesPerSystem[NodeID + 1].DctCount = MAX_DCTS_PER_NODE_HY; + MemPtr->DiesPerSystem[NodeID + 1].DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; + AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_HY * sizeof (DCT_STRUCT); + for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) { + MCTPtr->DctData[Dct].Dct = Dct; + MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_HY; + MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr; + MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct; + AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_HY * sizeof (CH_DEF_STRUCT); + for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_HY; Channel++) { + MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr; + AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2; + MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr; + MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct; + AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS); + } + } + + // + // Initialize NB block's variables + // + NBPtr->MemPtr = MemPtr; + NBPtr->RefPtr = MemPtr->ParameterListPtr; + NBPtr->MCTPtr = MCTPtr; + NBPtr->AllNodeMCTPtr = &MemPtr->DiesPerSystem[NodeID]; + NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL]; + NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL]; + + NBPtr->DctCachePtr = NBPtr->DctCache; + + MemRecNInitNBRegTableHy (NBPtr->NBRegTable); + NBPtr->Dct = 0; + NBPtr->Channel = 0; + NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); + + LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader); + LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader); + for (i = 0; i < NumberOfHooks; i++) { + NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue; + } + + NBPtr->InitRecovery = MemRecNMemInitNb; + + NBPtr->SwitchNodeRec = MemRecNSwitchNodeHy; + NBPtr->SwitchDCT = MemRecNSwitchDctHy; + NBPtr->SwitchChannel = MemRecNSwitchChannelHy; + NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb; + NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb; + NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb; + NBPtr->sendZQCmd = MemRecNSendZQCmdNb; + NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb; + + NBPtr->GetBitField = MemRecNGetBitFieldNb; + NBPtr->SetBitField = MemRecNSetBitFieldNb; + NBPtr->GetTrainDly = MemRecNGetTrainDlyNb; + NBPtr->SetTrainDly = MemRecNSetTrainDlyNb; + + NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldHy; + NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyHy; + NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctHy; + NBPtr->TrainingFlow = MemNRecTrainingFlowNb; + NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctHy; + NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctHy; + NBPtr->IsSupported[DramModeAfterDimmPres] = TRUE; + MemRecNSwitchDctHy (NBPtr, 0); + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sets the current die to work on. + * Should be called before accessing a certain die + * All data structures will be updated to point to the current node + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] NodeID - ID of the target die + * + */ + +VOID +STATIC +MemRecNSwitchNodeHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID + ) +{ + NBPtr->MCTPtr = &(NBPtr->AllNodeMCTPtr[NodeID]); + NBPtr->Node = NodeID; + NBPtr->MCTPtr->NodeId = NodeID; + MemRecNSwitchDctHy (NBPtr, NBPtr->Dct); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sets the current DCT to work on. + * Should be called before accessing a certain DCT + * All data structures will be updated to point to the current DCT + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Dct - ID of the target DCT + * + */ + +VOID +MemRecNSwitchDctHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Dct + ) +{ + NBPtr->Dct = Dct & 1; + NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[(NBPtr->MCTPtr->NodeId * MAX_DCTS_PER_DIE + Dct) * MAX_DIMMS_PER_CHANNEL]); + NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]); + + MemRecNSwitchChannelHy (NBPtr, 0); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sets the current channel to work on. + * Should be called before accessing a certain channel + * All data structures will be updated to point to the current channel + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Channel - ID of the target channel + * + */ + +VOID +MemRecNSwitchChannelHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Channel + ) +{ + NBPtr->Channel = 0; + NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[0]); +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function gets or set DQS timing during training. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] TrnDly - type of delay to be set + * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed + * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding + * @param[in] Field - Value to be programmed + * @param[in] IsSet - Indicates if the function will set or get + * + * @return value read, if the function is used as a "get" + */ + +UINT32 +STATIC +MemRecNcmnGetSetTrainDlyHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 IsSet, + IN TRN_DLY_TYPE TrnDly, + IN DRBN DrbnVar, + IN UINT16 Field + ) +{ + UINT16 index; + UINT16 offset; + UINT32 value; + UINT32 address; + UINT8 DIMM; + UINT8 Rank; + UINT8 Byte; + UINT8 Nibble; + + DIMM = DRBN_DIMM (DrbnVar); + Rank = DRBN_RANK (DrbnVar); + Byte = DRBN_BYTE (DrbnVar); + Nibble = DRBN_NBBL (DrbnVar); + + switch (TrnDly) { + case AccessRcvEnDly: + index = 0x10; + break; + case AccessWrDqsDly: + index = 0x30; + break; + case AccessWrDatDly: + index = 0x01; + break; + case AccessRdDqsDly: + index = 0x05; + break; + case AccessPhRecDly: + index = 0x50; + break; + default: + index = 0; + IDS_ERROR_TRAP; + } + + switch (TrnDly) { + case AccessRcvEnDly: + case AccessWrDqsDly: + index += (DIMM * 3); + if ((Byte & 0x04) != 0) { + // if byte 4,5,6,7 + index += 0x10; + } + if ((Byte & 0x02) != 0) { + // if byte 2,3,6,7 + index++; + } + if (Byte > 7) { + index += 2; + } + offset = 16 * (Byte % 2); + index |= (Rank << 8); + index |= (Nibble << 9); + break; + + case AccessRdDqsDly: + Field &= ~ 0x0001; + case AccessWrDatDly: + index += (DIMM * 0x100); + if (Nibble != 0) { + if (Rank != 0) { + index += 0xA0; + } else { + index += 0x70; + } + } else if (Rank != 0) { + index += 0x60; + } + // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need + // to run AccessPhRecDly sequence. + case AccessPhRecDly: + index += (Byte / 4); + offset = 8 * (Byte % 4); + break; + default: + offset = 0; + IDS_ERROR_TRAP; + } + + address = index; + MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address); + while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} + value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); + + if (IsSet != 0) { + if (TrnDly == AccessPhRecDly) { + value = NBPtr->DctCachePtr->PhRecReg[index & 0x03]; + } + + value = ((UINT32)Field << offset) | (value & (~((UINT32)0xFF << offset))); + MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, value); + address |= DCT_ACCESS_WRITE; + MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, address); + while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} + + if (TrnDly == AccessPhRecDly) { + NBPtr->DctCachePtr->PhRecReg[index & 0x03] = value; + } + } else { + value = (value >> offset) & 0xFF; + } + + return value; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function gets or sets a value to a bit field in a PCI register. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] FieldName - Name of Field to be set + * @param[in] Field - Value to be programmed + * @param[in] IsSet - Indicates if the function will set or get + * + * @return value read, if the function is used as a "get" + */ + +UINT32 +STATIC +MemRecNCmnGetSetFieldHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 IsSet, + IN BIT_FIELD_NAME FieldName, + IN UINT32 Field + ) +{ + SBDFO Address; + PCI_ADDR PciAddr; + UINT8 Type; + UINT32 Value; + UINT32 Highbit; + UINT32 Lowbit; + UINT32 Mask; + + Value = 0; + if (FieldName < BFEndOfList) { + Address = NBPtr->NBRegTable[FieldName]; + if (Address != 0) { + Lowbit = TSEFO_END (Address); + Highbit = TSEFO_START (Address); + Type = TSEFO_TYPE (Address); + + // If Fn2 and DCT1 selected, set Address to be 1xx + if (((Address & 0xF000) == 0x2000) && (NBPtr->Dct != 0)) { + Address |= 0x0100; + } + if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) { + // Special DCT Phy access + Address &= 0x0FFFFFFF; + Lowbit = 0; + Highbit = 16; + } else { + // Normal DCT Phy access + Address = TSEFO_OFFSET (Address); + } + + + if (Type == NB_ACCESS) { + // Address |= (((UINT32) (24 + 0)) << 15); + PciAddr.AddressValue = Address; + // Fix for MCM + PciAddr.Address.Device = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Device; + PciAddr.Address.Bus = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Bus; + PciAddr.Address.Segment = NBPtr->MemPtr->DiesPerSystem[NBPtr->Node].PciAddr.Address.Segment; + Address = PciAddr.AddressValue; + LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader); + } else if (Type == DCT_PHY_ACCESS) { + MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); + while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} + + Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); + } else { + IDS_ERROR_TRAP; + } + + if (IsSet != 0) { + // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case + if ((Highbit - Lowbit) != 31) { + Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); + } else { + Mask = (UINT32)0xFFFFFFFF; + } + Value &= ~(Mask << Lowbit); + Value |= (Field & Mask) << Lowbit; + + if (Type == NB_ACCESS) { + PciAddr.AddressValue = Address; + LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader); + } else if (Type == DCT_PHY_ACCESS) { + MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); + Address |= DCT_ACCESS_WRITE; + + MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); + while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} + } else { + IDS_ERROR_TRAP; + } + } else { + Value = Value >> Lowbit; // Shift + // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case + if ((Highbit - Lowbit) != 31) { + Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); + } + } + } + } else { + IDS_ERROR_TRAP; // Invalid bit field index + } + return Value; +} + + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function initializes bit field translation table + * +* @param[in,out] *NBRegTable - Pointer to the NB Table * + */ + +VOID +STATIC +MemRecNInitNBRegTableHy ( + IN OUT TSEFO *NBRegTable + ) +{ + UINT16 i; + for (i = 0; i <= BFEndOfList; i++) { + NBRegTable[i] = 0; + } + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31, 0, BFDevVendorIDReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60), 2, 0, BFNodeID); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31, 0, BFCSBaseAddr0Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31, 0, BFCSBaseAddr1Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31, 0, BFCSBaseAddr2Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31, 0, BFCSBaseAddr3Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31, 0, BFCSBaseAddr4Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31, 0, BFCSBaseAddr5Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31, 0, BFCSBaseAddr6Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31, 0, BFCSBaseAddr7Reg); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31, 0, BFCSMask0Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31, 0, BFCSMask1Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31, 0, BFCSMask2Reg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31, 0, BFCSMask3Reg); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 0, BFDramControlReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 0, BFDramInitRegReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31, 0, BFDramBankAddrReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31, 0, BFDramMRSReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 9, 7, BFDramTerm); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 0, BFDramTimingLoReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 0, BFDramTimingHiReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31, 0, BFDramConfigLoReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 0, BFDramConfigHiReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 0, BFDctAddlOffsetReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31, 0, BFDctAddlDataReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 4, 0, BFNbFid); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15, 0, BFMrsAddress); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 7, 7, BFLevel); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 0, 0, BFInitDram); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 8, 8, BFDdr3Mode); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 9, 9, BFLegacyBiosMode); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 5, 5, BFSubMemclkRegDly); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 6, 6, BFOdtSwizzle); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 8, 8, BFDramEnabled); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg); + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg); + + MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31, 0, BFMctCfgHiReg); + + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31, 0, BFODCControl); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31, 0, BFAddrTmgControl); + + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 0, 0, BFWrtLvTrEn); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 1, 1, BFWrtLvTrMode); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 5, 4, BFTrDimmSel); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11, 8, BFWrLvOdt); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn); + MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp); + +} + +/*-----------------------------------------------------------------------------*/ +/** + * MemRecNIsIdSupportedHy + * This function matches the CPU_LOGICAL_ID with certain criteria to + * determine if it is supported by this NBBlock. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID + * + * @return TRUE - This node is a Hydra. + * @return FALSE - This node is not a Hydra. + * + */ +BOOLEAN +STATIC +MemRecNIsIdSupportedHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN CPU_LOGICAL_ID *LogicalIdPtr + ) +{ + if ((LogicalIdPtr->Revision & AMD_F10_HY_ALL) != 0) { + return TRUE; + } else { + return FALSE; + } +} diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.h b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.h new file mode 100644 index 0000000000..93c3d01911 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnhy.h @@ -0,0 +1,110 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mnhy.h + * + * Northbridge Hydra Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 34897 $ @e \$Date: 2010-07-14 10:07:10 +0800 (Wed, 14 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +#ifndef _MRNHY_H_ +#define _MRNHY_H_ + +/*---------------------------------------------------------------------------- + * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) + * + *---------------------------------------------------------------------------- + */ +#define MAX_DCTS_PER_NODE_HY 2 +#define MAX_CHANNELS_PER_DCT_HY 1 + +#define _4GB_RJ8 ((UINT32)4 << (30 - 8)) +#define MTRR_VALID 11 + +/*----------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *----------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS, STRUCTURES, ENUMS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * FUNCTIONS PROTOTYPE + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +MemRecConstructNBBlockHY ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN UINT8 NodeID + ); + +VOID +MemRecNSwitchDctHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Dct + ); + +VOID +MemRecNSwitchChannelHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Channel + ); + +VOID +MemRecNFinalizeMctHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +MemRecNInitializeMctHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +#endif /* _MRNHY_H_ */ + + diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnmcthy.c b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnmcthy.c new file mode 100644 index 0000000000..60fbc9a73e --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnmcthy.c @@ -0,0 +1,162 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mrnmctdr.c + * + * Northbridge DR MCT supporting functions Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mrport.h" +#include "mm.h" +#include "mn.h" +#include "mrnhy.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNMCTHY_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sets final values in BUCFG and BUCFG2 + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemRecNFinalizeMctHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_DATA_STRUCT *MemPtr; + S_UINT64 SMsr; + + MemPtr = NBPtr->MemPtr; + + // Recommended settings for F2x11C + MemRecNSetBitFieldNb (NBPtr, BFMctCfgHiReg, 0x2CE00F60); + + LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); + if (!NBPtr->ClToNbFlag) { + SMsr.lo &= ~((UINT32) 1 << 15); // ClLinesToNbDis + } + LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); + + LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader); + SMsr.hi &= ~((UINT32) 1 << (48 - 32)); // WbEnhWsbDis + LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sets initial values in BUCFG and BUCFG2 + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemRecNInitializeMctHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_DATA_STRUCT *MemPtr; + S_UINT64 SMsr; + + MemPtr = NBPtr->MemPtr; + + LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); + if (SMsr.lo & ((UINT32) 1 << 15)) { + NBPtr->ClToNbFlag = TRUE; + } + SMsr.lo |= (UINT32) 1 << 15; // ClLinesToNbDis + LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); + + LibAmdMsrRead (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader); + SMsr.hi |= (UINT32) 1 << (48 - 32); // WbEnhWsbDis + LibAmdMsrWrite (BU_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader); +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ diff --git a/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnprotohy.c b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnprotohy.c new file mode 100644 index 0000000000..316b25d717 --- /dev/null +++ b/src/vendorcode/amd/agesa/f14/Proc/Recovery/Mem/NB/HY/mrnprotohy.c @@ -0,0 +1,62 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mrnproto.c + * + * Northbridge support functions for Errata and early samples Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + **/ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + + +#include "AGESA.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_RECOVERY_MEM_NB_HY_MRNPROTOHY_FILECODE +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + + |